Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Comparison of surface-derived and ISCCP cloud optical properties

One objective of the FIRE Project is to validate the cloud parameters given on ISCCP tapes. ISCCP first defines whether or not a region is clear or has clouds based on two threshold algorithms. If the region has clouds, then a cloud optical depth is given as well as a cloud height. Special high resolution ISCCP CX tapes were created for the time period of the Wisconsin FIRE experiment. These tapes did not include the cloud height product, however, other parameters used to make up the standard ISCCP Cl products were available. The ISCCP cloud/no cloud and cloud depth parameters are compared with surface derived values for the Wisconsin FIRE region during the October 27 and 28 case study days.

Whitlock, C. H.↗
DOE OSTI2024

Probing the optical properties and toxicological profile of zinc tungstate nanorods

Zinc tungstate is a semiconductor known for its favorable photocatalytic, photoluminescence, and scintillation properties, coupled with its relatively low cost, reduced toxicity, and high stability in biological and catalytic environments. In particular, zinc tungstate evinces scintillation properties, namely the ability to emit visible light upon absorption of energetic radiation such as x rays, which has led to applications not only as radiation detectors but also for biomedical applications involving the delivery of optical light to deep tissue, such as photodynamic therapy and optogenetics. Here, we report on the synthesis of zinc tungstate nanorods generated via an optimized but facile method, which allows for synthetic control over the aspect ratio of the as-synthesized anisotropic motifs via rational variation of the solution pH. Additionally, we investigate the effect of aspect ratio on their resulting photoluminescent and radioluminescent properties. We further demonstrate the potential of these zinc tungstate nanorods for biomedical applications, such as photodynamic therapy for cancer treatment, by analyzing their toxicological profile within cell lines and neurons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interpretable ensemble learning unveils main aerosol optical properties in predicting cloud condensation nuclei number concentration

Variations in cloud condensation nuclei number concentration (N CCN ) significantly influence cloud microphysics, yet direct N CCN measurements remain challenging. Here, we present an N CCN ensemble learning (NEL) model utilizing ensemble learning and interpretability analysis on aerosol optical parameters. Validated at two land sites, two ocean sites and one polar site within the Atmospheric Radiation Measurement program, the mean absolute percentage error range of the NEL model across different environments is from 12% to 36%, demonstrating high accuracy. Key findings reveal that aerosol optical parameters can serve as predictors for N CCN . Aerosol scattering and backscattering coefficients, absorption coefficient, backscatter fraction (BSF), and Ångström exponent (AE) are positively correlated with N CCN , while single scattering albedo shows negative correlations. N CCN prediction at land sites is highly sensitive to BSF, largely driven by the backscattering coefficient, as fine particles dominate in these sites. At ocean sites, N CCN prediction is more sensitive to AE, primarily influenced by the scattering coefficient, due to the higher proportion of larger particles. At the polar site, N CCN prediction shows sensitivity to both BSF and AE, mainly driven by the scattering coefficient, as polar sites are cleaner and contain larger particles. These differences reflect the variation in particle size and number concentration across different environments.

Atmospheric science↗
NASA NTRS1993

Optical properties of orbital debris

This paper discusses the albedoes and phase angle effects found for 400 members of eight debris swarms using observations obtained in 1990 and 1991 with the NASA Johnson Space Center CCD-equipped portable Schmidt telescope. The mean albedo derived by comparing optical brightnesses with averaged radar cross sections (RCS's) is 10 percent. The standard deviation in log albedo is 0.40 if the RCS's are assumed to contribute equally to the scatter. The RCS's used in this work are the median values obtained by comparing data from 47 separate RCS catalog updates. Forty objects are sufficiently free of tumble or aspect angle effects to yield consistent phase function slopes. These range from specular in nature (zero slope) through Lambertian (moderate slope) to lunar (steep slope) with the mean lying midway between specular and Lambertian.

Henize, Karl G.↗
NASA NTRS1994

Optical properties of poly-HCN and their astronomical applications

Matthews (1992) has proposed that HCN "polymer" is ubiquitous in the solar system. We apply vacuum deposition and spectroscopic techniques previously used on synthetic organic heteropolymers (tholins), kerogens, and meteoritic organic residues to the measurement of the optical constants of poly-HCN in the wavelength range 0.05-40 micrometers. These measurements allow quantitative comparison with spectrophotometry of organic-rich bodies in the outer solar system. In a specific test of Matthews' hypothesis, poly-HCN fails to match the optical constants of the haze of the Saturnian moon, Titan, in the visible and near-infrared derived from astronomical observations and standard models of the Titan atmosphere. In contrast, a tholin produced from a simulated Titan atmosphere matches within the probable errors. Poly-HCN is much more N-rich than Titan tholin.

Optics↗
NASA NTRS1990

The 27-28 October 1986 FIRE IFO cirrus case study - Cloud optical properties determined by High Spectral Resolution Lidar

The High Spectral Resolution Lidar (HSRL) was operated from a roof-top site in Madison, Wisconsin. The transmitter configuration used to acquire the case study data produces about 50 mW of ouput power and achieved eye-safe, direct optical depth, and backscatter cross section measurements with 10 min averaging times. A new continuously pumped, injection seeded, frequency doubled Nd:YAG laser transmitter reduces time-averaging constraints by a factor of about 10, while improving the aerosol-molecular signal separation capabilities and wavelength stability of the instrument. The cirrus cloud backscatter-phase functions have been determined for the October 27-28, 1986 segment of the HSRL FIRE dataset. Features exhibiting backscatter cross sections ranging over four orders of magnitude have been observed within this 33 h period. During this period, cirrus clouds were observed with optical thickness ranging from 0.01 to 1.4. The altitude relationship between cloud top and bottom boundaries and the optical center of the cloud is influenced by the type of formation observed.

Grund, C. J.↗
NASA NTRS2003

Measuring Aerosol Optical Properties with the Ozone Monitoring Instrument (OMI)

The Ozone Monitoring Instrument (OMI) is the Dutch-Finnish contribution to the NASA EOS-Aura mission scheduled for launch in January 2004. OM1 is an imaging spectrometer that will measure the back-scattered Solar radiance between 270 an 500 nm. With its relatively high spatial resolution (13x24 sq km at nadir) and daily global coverage. OM1 will make a major contribution to our understanding of atmospheric chemistry and to climate research. OM1 will provide data continuity with the TOMS instruments. One of the pleasant surprises of the TOMS data record was its information on aerosol properties. First, only the absorbing aerosol index, which is sensitive to elevated lay- ers of aerosols such as desert dust and smoke aerosols, was derived. Recently these methods were further improved to yield aerosol optical thickness and single scattering albedo over land and ocean for 19 years of TOMS data (1979-1992,1997-2002), making it one of the longest and most valuable time series for aerosols presently available. Such long time series are essential to quantify the effect of aerosols on the Earth& climate. The OM1 instrument is better suited to measure aerosols than the TOMS instruments because of the smaller footprint, and better spectral coverage. The better capabilities of OMI will enable us to provide an improved aerosol product, but the knowledge will also be used for further analysis of the aerosol record from TOMS. The OM1 aerosol product that is currently being developed for OM1 combines the TOMS experience and the multi-spectral techniques that are used in the visible and near infrared. The challenge for this new product is to provide aerosol optical thickness and single scattering albedo from the near ultraviolet to the visible (330-500 nm) over land and ocean. In this presentation the methods for deriving the OM1 aerosol product will be presented. Part of these methods developed for OM1 can already be applied to TOMS data and results of such analysis will be shown.

Veefkind, J. P.↗
NASA NTRS1972

Particle impact and optical property analysis of the surfaces of Surveyor 3 materials

As part of the investigation of Surveyor 3 materials, a study was conducted to determine the effect of the lunar environment on some of the painted and unpainted exterior surfaces. Examination of the camera parts and tube sections was conducted using three techniques: (1) optical and scanning electron microscopy, (2) energy dispersive X-ray probe analysis, and (3) spectral reflectance measurements.

Anderson, D. L.↗
NASA NTRS2019

AERONET Remotely Sensed Measurements and Retrievals of Biomass Burning Aerosol Optical Properties During the 2015 Indonesian Burning Season

An extreme biomass-burning event occurred in Indonesia from September through October 2015 due to severe drought conditions, partially caused by a major El Nino event, thereby allowing for significant burning of peatland that had been previously drained. This event had the highest sustained aerosol optical depths (AOD) ever monitored by the global Aerosol Robotic Network (AERONET). The newly developed AERONET Version 3 algorithms retain high AOD at the longer wavelengths when associated with high Angstrom Exponents (AEs), which thereby allowed for measurements of AOD at 675 nanometers as high as approximately 7, the upper limit of Sun photometry. Measured AEs at the highest monitored AOD levels were subsequently utilized to estimate instantaneous values of AOD at 550 nanometers in the range of 11 to 13, well beyond the upper measurement limit. Additionally, retrievals of complex refractive indices, size distributions, and single scattering albedos (SSA) were obtained at much higher AOD levels than possible from almucantar scans due to the ability to perform retrievals at smaller solar zenith angles with new hybrid sky radiance scans. For retrievals made at the highest AOD levels the fine mode volume median radii were approximately 0.25 to 0.30 microns, which are very large particles for biomass burning. Very high SSA values (approximately 0.975 from 440 to 1020 nanometers) are consistent with the domination by smoldering combustion of peat burning. Estimates of the percentage peat contribution to total biomass burning aerosol based on retrieved SSA and laboratory measured peat SSA were approximately 80-85 percent, in excellent agreement with independent estimates.

Eck, T. F.↗
NASA NTRS1980

Extreme ultraviolet optical properties of two SiO2 based low-expansion materials

The reflectances of two low-expansion materials, a recrystallized glass ceramic and a high silica glass, have been measured at five angles of incidence from 15 to 85 deg in the wavelength region from 80 to 310 A and in some cases up to 1050 A. Optical constants are derived and silicon core-level transitions analyzed.

Rife, J.↗
NASA NTRS1996

The 27-28 October 1986 FIRE IFO Cirrus Case Study: Cloud Optical Properties Determined by High Spectral Resolution Lidar

During the First ISCCP Region Experiment (FIRE) cirrus intensive field observation (IFO) the High Spectral Resolution Lidar was operated from a roof top site on the University of Wisconsin-Madison campus. Because the HSRL technique separately measures the molecular and cloud particle backscatter components of the lidar return, the optical thickness is determined independent of particle backscatter. This is accomplished by comparing the known molecular density distribution to the observed decrease in molecular backscatter signal with altitude. The particle to molecular backscatter ratio yields calibrated measurements of backscatter cross sections that can be plotted ro reveal cloud morphology without distortion due to attenuation. Changes in cloud particle size, shape, and phase affect the backscatter to extinction ratio (backscatter-phase function). The HSRL independently measures cloud particle backscatter phase function. This paper presents a quantitative analysis of the HSRL cirrus cloud data acquired over an approximate 33 hour period of continuous near zenith observations. Correlations between small scale wind structure and cirrus cloud morphology have been observed. These correlations can bias the range averaging inherent in wind profiling lidars of modest vertical resolution, leading to increased measurement errors at cirrus altitudes. Extended periods of low intensity backscatter were noted between more strongly organized cirrus cloud activity. Optical thicknesses ranging from 0.01-1.4, backscatter phase functions between 0.02-0.065 sr (exp -1) and backscatter cross sections spanning 4 orders of magnitude were observed. the altitude relationship between cloud top and bottom boundaries and the cloud optical center altitude was dependent on the type of formation observed Cirrus features were observed with characteristic wind drift estimated horizontal sizes of 5-400 km. The clouds frequently exhibited cellular structure with vertical to horizontal dimension ratios of 1:5-1:1.

Grund, C. J.↗
NASA NTRS1981

Solar energy absorption characteristics and the effects of heat on the optical properties of several coatings

The solar energy absorption characteristics of several high temperature coatings were determined and effects of heat on these coatings were evaluated. Included in the investigation were an electroplated alloy of black chrome and vanadium, electroplated black chrome, and chemically colored 316 stainless steel. Each of the coatings possessed good selective solar energy absorption properties at laboratory ambient temperature. Measured at a temperature of 700 K (800 F), the emittances of black chrome, black chrome vanadium, and colored stainless steel were 0.11, 0.61, and 0.15, respectively. Black chrome and black chrome vanadium did not degrade optically in the presence of high heat (811 K (1000 F)). Chemically colored stainless steel showed slight optical degradation when exposed to moderately high heat (616 K (650 F)0, but showed more severe degradation at exposure temperatures beyond this level. Each of the coatings showed good corrosion resistance to a salt spray environment.

Lowery, J. R.↗
NASA NTRS2021

Extensive Characterization of Aerosol Optical Properties and Chemical Component Concentrations: Application of the GRASP/Component Approach to Long-term AERONET Measurements

A recently developed GRASP/Component approach (GRASP: Generalized Retrieval of Atmosphere and Surface Properties) was applied to AERONET (Aeronet Robotic Network) sun photometer measurements in this study. Unlike traditional aerosol component retrieval, this approach allows the inference of some information about aerosol composition directly from measured radiance, rather than indirectly through the inversion of optical parameters, and has been integrated into the GRASP algorithm. The newly developed GRASP/Component approach was applied to 13 AERONET sites for different aerosol types under the assumption of aerosol internal mixing rules to analyze the characteristics of aerosol components and their distribution patterns. The results indicate that the retrievals can characterize well the spatial and temporal variability of the component concentration for different aerosol types. A reasonable agreement between GRASP BC retrievals and MERRA-2 BC products is found for all different aerosol types. In addition, the relationships between aerosol component content and aerosol optical parameters such as aerosol optical depth (AOD), fine-mode fraction (FMF), absorption Ångström exponent (AAE), scattering Ångström exponent (SAE), and single scattering albedo (SSA) are also analyzed for indirect verifying the reliability of the component retrieval. It was demonstrated the GRASP/Component optical retrievals are in good agreement with AERONET standard products [e.g., correlation coefficient (R) of 0.93–1.0 for AOD, fine-mode AOD (AODF), coarse-mode AOD (AODC) and Ångström exponent (AE); R = ~ 0.8 for absorption AOD (AAOD) and SSA; RMSE (root mean square error) < 0.03 for AOD, AODF, AODC, AAOD and SSA]. Thus, it is demonstrated the GRASP/Component approach can provide aerosol optical products with comparable accuracy as the AERONET standard products from the ground-based sun photometer measurements as well as some additional important inside on aerosol composition.

Xindan Zhang↗
NASA NTRS1986

Preparation and optical properties of GA(x)IN(1-x)P alloys

The solution crystallization method was used to obtain Ga(z)In(1-x)P alloys for all values of x desired between zero and 1. The method of preparation makes it possible to crystallize the solid at a constant temperature. The points obtained by cathodoluminescence are nearly in straight lines. The optical absorption thresholds are confirmed in the results and make it possible to define the nature of the transitions except when x is in the neighborhood of 0.65. These determinations agree with those of Hilsum and Porteus (1968), but are not in agreement with those obtained by Lorenz et al, (1968).

Rodot, H.↗
NASA NTRSDate not supplied

Remotely-Sensed Aerosol Optical Properties Retrieved from a High Spectral Resolution Lidar (HSRL) During the FIREX-AQ Field Campaign

The NASA Langley Research Center’s High Spectral Resolution Lidar with Differential Absorption Lidar (HSRL-DIAL) instrument was flown on the NASA DC-8 aircraft during the Fire Influence on Region to Global Environments and Air Quality (FIREX-AQ; https://www.esrl.noaa.gov/csl/projects/firex-aq/) field campaign. The airborne HSRL-DIAL system retrieves aerosol backscatter and depolarization at 3 wavelengths (355, 532, and 1064 nm), aerosol extinction at 532 nm, and ozone concentration (differential at 290 and 300 nm). Additionally, the HSRL-DIAL system incorporates both a zenith and nadir telescope allowing for retrievals from in-smoke sampling to be integrated through the plume. During the first portion of the FIREX-AQ campaign, the DC8 aircraft sampled more than ten large-scale fires with varying fuels, combustion stages, and metrological conditions, with some fires being sampled multiple times across separate days. This presentation focuses on the retrievals of aerosol backscatter (at 532 and 1064 nm), aerosol depolarization (at 532 nm and 1064 nm), aerosol optical thickness (at 532 nm), lidar ratio, and color ratio to examine the changes in these properties in the smoke plume as they are advected downwind.

Taylor Shingler↗
NASA NTRS1993

Optical properties of marine stratocumulus clouds modified by ships

Results are presented of an application of the diffusion domain method to multispectral solar radiation measurements obtained deep within a marine stratocumulus cloud layer modified by pollution from ships. In situ airborne measurements of the relative angular distribution of scattered radiation are compared to known asymptotic expressions for the intensity field deep within an optically thick cloud layer. Analytical expressions relating the ratio of the nadir-to-zenith intensities to surface reflectance, similarity parameter, and scaled optical depth beneath the aircraft flight level are used to analyze measurements obtained with the cloud absorption radiometer mounted on the University of Washington's C-131A research aircraft. It is shown that the total optical thickness of the cloud layer increased in the ship tracks, in contrast to the similarity parameter, which decreased. The decrease in absorption was a direct consequence of the reduction in cloud droplet size that occurred within the ship tracks.

King, Michael D.↗
NASA NTRS1975

Instrumentation for measurements of solar irradiance and atmospheric optical properties

The Active Cavity Radiometer (ACR), an accurate absolute pyrheliometer, has been developed for measurements of total solar irradiance. It has been used to discover a -2.2% error in the International Pyrheliometric Scale and to make measurements in balloon flight experiments yielding a solar constant value of 136.6 (+ or - 0.7) mW/sq cm. New ACRs are being developed to monitor the total output of solar optical radiation in balloon, satellite and space shuttle experiments with long-term absolute uncertainty of + or - 0.1% or less. In a separate program, instrumentation for the measurement of the scattering and extinction of solar radiation by the atmosphere is being constructed to provide data for modeling atmospheric aerosol content. The aerosol models will facilitate computation of radiative transfer effects yielding quantitative net fluxes useful in evaluating the climatological impact of aerosols.

Willson, R. C.↗
NASA NTRS2004

Cloud-Vegetation Radiative Interaction: What Can We Learn from it about Cloud Optical Properties?

Because of their radiative interactions, the vegetation canopy and the atmosphere are coupled together; each serves as a boundary condition to the radative transfer equations in the adjacent medium. To better understand radiative processes in these media we need an accurate description of their interactions. This presentation outlines a technique needed to describe interactions between vegetation and clouds and exploits it to retrieve cloud optical depth from ground-based radiance measurements. measurements of zenith radiance in the RED and NIR spectral regions. In addition to an algebraic combinations of spectral radiances such as Normalized Difference Cloud Index (NDCI) that can result in poor retrievals due to its insensitivity to cloud fraction, both RED and NIR radiances as points on the "RED vs. NIR" plane are proposed to be used for retrieval. The proposed method is applied to a multi-channel sunphotometer (as a part of AERONET) measurements at the ARM site in Oklahoma. In addition to cloud optical depth, the new method also infers a "radiatively effective" cloud fraction.

Marshak, Alexander↗