Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Second-order nonlinear optical and linear ultraviolet-visible absorption properties of the type-II multiferroic candidates RbFe( A O 4 ) 2 ( A = Mo, Se, S)

Motivated by the search for type-II multiferroics, in this work, we present a comprehensive optical study of a complex oxide family of type-II multiferroic candidates: RbFe(MoO 4 ) 2 , RbFe(SeO 4 ) 2 , and RbFe(SO 4 ) 2 .We employ rotationalanisotropy second harmonic generation spectroscopy (RA SHG), a technique sensitive to point symmetries, to address discrepancies in literature-assigned point/space groups and to identify the correct crystal structures. At room temperature we find that our RA SHG patterns rotate away from the crystal axes in RbFe(AO 4 ) 2 ( A = Se, S), which identifies the lack of mirror symmetry and in-plane two-fold rotational symmetry. Also, the SHG efficiency of RbFe(SeO 4 ) 2 is two orders of magnitude stronger than RbFe(AO 4 )2 ( A = Mo, S), which suggests broken inversion symmetry. Additionally, we present temperature-dependent linear optical characterizations near the band edge of this family of materials using ultraviolet-visible absorption spectroscopy. Included is experimental evidence of the band gap energy and band gap transition type for this family. Subband gap absorption is also presented, which reveals prominent optical transitions, some with an unusual central energy temperature dependence. Furthermore, we find that by substituting the A site in RbFe(AO 4 ) 2 ( A = Mo, Se, S), the aforementioned transitions are spectrally tunable. Finally, we discuss the potential origin and impact of these tunable transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Reconciling calculations and measurements of inverse bremsstrahlung absorption

It was recently shown that the use of Coulomb logarithms appropriate for bremsstrahlung radiation (rather than transport processes) along with corrections for the Langdon effect and ion screening reproduced measurements of collisional absorption in well-characterized underdense plasmas [D. Turnbull et al., Phys. Rev. Lett. 130, 145103 (2023)]. However, it was recognized at the time that the use of the standard absorption-reduction factor from Langdon's seminal paper was inconsistent with the use of Coulomb logarithms that are thermally averaged over a Maxwellian electron-velocity distribution function. A more accurate approach would be to average over the expected super-Gaussian distribution function while accounting for the Gaunt factor's velocity dependence, which somewhat mitigates the Langdon effect; however, at that time, this theory matched the data less well. This conflict is now eliminated with the additional insight that the ionization state of our mid-Z ion species (when present) was lower than had been assumed, as evidenced by the Thomson-scattering data and time-dependent Cretin simulations. We are now able to show that an improved treatment of the Langdon effect provides the best match to data. Otherwise, the prior conclusions remain unchanged. We also show an example of the substantial expected impact to the absorption rate in calculations of indirect-drive hohlraums.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Faraday effect in collisional magnetized plasmas

Faraday rotation is a valuable diagnostic tool for investigating laboratory and astrophysical plasmas, but it has almost exclusively been treated in the collisionless limit (despite the non-negligible role of Coulomb collisions in many laboratory plasmas). Here, we show that Faraday rotation can occur in collisional plasmas and that the usual effect is curiously altered by collisions. Namely, an initially linearly polarized light wave—propagating parallel to a uniform magnetic field—becomes elliptically polarized in the collisional plasma, and collisional absorption of the wave also occurs. Moreover, the ellipticity and rotation angle are quantifiably sensitive to the fidelity of the collisional transport coefficients. As we will demonstrate with particle-in-cell EPOCH simulations, these effects offer a stringent diagnostic tool for benchmarking multi-scale plasma simulation codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Illuminating the Role of Alcohol Substrate in Nickel Photoredox Catalysis via Ground State and Transient Absorption Spectroscopy

Direct excitation of nickel photocatalysts has gained popularity over the last several years following the successful activation of nickel by Ir and Ru photosensitizers. The ability to pair these photosensitizers with Ni catalysts facilitates the formation of crucial chemical bonds under relatively mild conditions. However, there are still gaps in our understanding of what influences the performance of these Ni photocatalysts. Previous work from our group identified a nickel photocatalyst supported by a tridentate pyridinophane ligand that undergoes wavelength-dependent cross-coupling reactivity. Herein, we report detailed studies of the wavelength dependence of the C–O cross-coupling reactivity, illustrating that the catalytic activity has an optimal wavelength, and excitation on both the blue and red sides of this optimal wavelength leads to a reduction in product yield. We also reveal a crucial catalyst-alcohol preirradiation interaction that drastically alters the catalyst’s optical properties. Furthermore, we investigate both wavelength dependency and alcohol dependency via optical transient absorption spectroscopy and reveal a substrate binding process responsible for the observed wavelength-dependent cross-coupling catalysis.

alcohol↗
DOE OSTI2022

Quantum efficiency of InGaN–GaN multi-quantum well solar cells: Experimental characterization and modeling

InGaN-based multi-quantum well (MQW) solar cells are promising devices for photovoltaics (e.g., for tandem solar cells and concentrator systems), space applications, and wireless power transfer. In order to improve the efficiency of these devices, the factors limiting their efficiency and stability must be investigated in detail. Due to the complexity of a MQW structure, compared with a simple pn junction, modeling the spectral response of these solar cells is not straightforward, and ad hoc methodologies must be implemented. In this paper, we propose a model, based on material parameters and closed-formula equations, that describes the shape of the quantum efficiency of InGaN/GaN MQW solar cells, by taking into account the layer thickness, the temperature dependence of the absorption coefficient, and quantum confinement effects. We demonstrate (i) that the proposed model can effectively reproduce the spectral response of the cells; in addition, (ii) we prove that the bulk p-GaN layer absorbs radiation, but the carriers photogenerated in this region do not significantly contribute to device current. Finally, we show that (iii) by increasing the temperature, there is a redshift of the absorption edge due to bandgap narrowing, which can be described by Varshni law and is taken into account by the model, and a lowering in the extraction efficiency due to the increase in recombination (mostly Shockley–Read–Hall) inside the quantum wells, which is also visible by decreasing light intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Charge transfer states impact the triplet pair dynamics of singlet fission polymers

Polymers are desirable optoelectronic materials, stemming from their solution processability, tunable electronic properties, and large absorption coefficients. An exciting development is the recent discovery that singlet fission (SF), the conversion of a singlet exciton to a pair of triplet states, can occur along the backbone of an individual conjugated polymer chain. Here, compared to other intramolecular SF compounds, the nature of the triplet pair state in SF polymers remains poorly understood, hampering the development of new materials with optimized excited state dynamics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Thermoluminescence and phototransferred thermoluminescence dosimetry on mobile phone protective touchscreen glass

Thermoluminescence and phototransferred thermoluminescence measurements of protective glass from smartphones are described. Samples of Gorilla Glass were examined from nine different manufacturers and 40 different phone models. Additionally, 12 glasses believed to be original equipment manufacturer replacements, as well as three glass samples from U.S. finishers, were also studied. Altogether, 99 different Gorilla Glass samples were examined. The radiation-induced thermoluminescence signal produced glow curve shapes specific to the Gorilla Glass generations and could be used to distinguish between them. A background thermoluminescence (and phototransferred thermoluminescence) signal was found in all unirradiated samples. Its intensity and shape were found to be dependent on the Gorilla Glass generation, phone manufacturer, and phone model. The background signal was demonstrated to be produced by ultraviolet light exposure; the shape of the background signal was able to be reproduced by the combined exposure to a broad-spectrum solar simulator and a 302 nm ultraviolet light source. The background signal intensity was found to vary with the location from which it was taken on the glass. It was also found to be dependent on the depth within the Gorilla Glass due to absorption of the ultraviolet light as it traversed the medium. Removal of the glasses’ surface layers was found to be an inadequate method for removing the background signal. In some samples, the background signal intensity was large enough to significantly contribute to the total thermoluminescence (and phototransferred thermoluminescence) signal; therefore, a matrix deconvolution method was introduced to separate the background signal and radiation-induced signal. This method was found to enable dose reconstruction using the radiation-induced signal alone.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

The Gaussian nature of the band-edge of ZnO microcrystalline thin films

A straightforward analytical approach based on the derivative of the absorption coefficient is presented, which enables probing the nature of the band edge (BE) of ZnO microcrystalline films. The study was conducted via transmission experiments at temperatures of 77–532 K and repeated for samples annealed up to 1073 K. It was found that the derivative of the natural log of the BE absorption coefficient resulted in a Gaussian function. The Gaussian linewidth is used in the electron–phonon (e–p) interaction model to characterize the defect-state of the films. The BE of the as-grown film was found to exhibit no thermal dependence and no e–p coupling, indicative of a disordered crystal. Upon annealing and improvement of the film quality, the thermal phonons became more activated, but only above room temperature with a phonon energy of ~75 meV, while up to room temperature, the impact of phonons on the BE is insignificant. A disorder–order transition was determined to take place at an annealing temperature of ~673 K. X-ray diffraction concurs with these results. The study indicates that the prevalent defects are of structural nature due to the inherent granular morphology of the films. This defect was found to dominate the behavior of the BE even at the elevated temperature regime rather than thermal phonons.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Epitaxial (Al x Ga 1-x-y In y ) 2 O 3 Alloys Lattice Matched to Monoclinic Ga 2 O 3 Substrates

We have epitaxially stabilized a series of monoclinic (Al x Ga 1-x-y In y ) 2 O 3 alloys by careful choice of molecular beam epitaxy growth conditions, which balance alloy growth with suboxide desorption. The films are pseudomorphic to (010) β-Ga 2 O 3 substrates at thicknesses up to 150 nm with compositions ranging from (Al 0.01 Ga 0.83 In 0.16 ) 2 O 3 to (Al 0.24 Ga 0.75 In 0.03 ) 2 O 3 . The absorption edge shifts from approximately 4.62-5.14 eV with coincidently increasing Al and decreasing In mole fractions. J-V measurements reveal an increase in resistivity over four orders of magnitude with a maximum value of 4.2 x 10 5 Ω-cm for (Al 0.17 Ga 0.76 In 0.07 ) 2 O 3 , which has nearly identical lattice parameters (both in-plane and out-of-plane) to the underlying β-Ga 2 O 3 . Scanning transmission electron microscopy of this sample reveals a mostly uniform and single crystalline film, though we identify areas of non-uniform In incorporation and some γ-phase inclusions. This work demonstrates the feasibility of thick layers lattice-matched to β-Ga 2 O 3 with increased bandgap compared to phase-separation limited (Al,Ga) 2 O 3 . These alloys can enable higher bandgap epitaxial dielectrics and high sheet charge density transistors by increasing the conduction band offset with respect to β-Ga 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Improved representation of black carbon mixing structures suggests stronger direct radiative heating

Black carbon significantly influences the Earth system because of its strong solar radiation absorption. However, its direct radiative effect remains poorly understood in current climate models, partly because current climate models oversimplify the diverse structures formed when black carbon mixes with other atmospheric components. Here we show that incorporating more realistic, multi-mixing-structure representations of black carbon increases the direct radiative effect. We find that aged black carbon particles, with thicker coatings and higher embedded fractions, enhance the direct radiative effect more efficiently. Using machine learning alongside the Community Earth System Model, we show that the direct radiative effect at the top of the atmosphere in regions with heavy black carbon pollution is 31.6% greater when multi-mixing structures are considered. These findings highlight the importance of modeling complex mixing structures of particle-resolved black carbon to accurately capture their warming impacts on global atmosphere, particularly in highly polluted regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Anisotropic Excitons Reveal Local Spin Chain Directions in a van der Waals Antiferromagnet

A long‐standing pursuit in materials science is to identify suitable magnetic semiconductors for integrated information storage, processing, and transfer. Van der Waals magnets have brought forth new material candidates for this purpose. Recently, sharp exciton resonances in antiferromagnet NiPS 3 have been reported to correlate with magnetic order, that is, the exciton photoluminescence intensity diminishes above the Néel temperature. Here, it is found that the polarization of maximal exciton emission rotates locally, revealing three possible spin chain directions. This discovery establishes a new understanding of the antiferromagnet order hidden in previous neutron scattering and optical experiments. Furthermore, defect‐bound states are suggested as an alternative exciton formation mechanism that has yet to be explored in NiPS 3 . The supporting evidence includes chemical analysis, excitation power, and thickness dependent photoluminescence and first‐principles calculations. This mechanism for exciton formation is also consistent with the presence of strong phonon side bands. This study shows that anisotropic exciton photoluminescence can be used to read out local spin chain directions in antiferromagnets and realize multi‐functional devices via spin‐photon transduction.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Revealing Excited‐State Trajectories on Potential Energy Surfaces with Atomic Resolution in Real Time

Abstract Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited‐state trajectories of a diplatinum complex featuring photo‐activated metal–metal σ ‐bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide‐angle X‐ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited‐state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non‐equilibrium processes along excited‐state trajectories involving multiple excited‐state PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dominant Role of Hole Transport Pathway in Achieving Record High Photoconductivity in Two‐Dimensional Metal–Organic Frameworks

Abstract Metal–organic frameworks (MOFs) with mobile charges have attracted significant attention due to their potential applications in photoelectric devices, chemical resistance sensors, and catalysis. However, fundamental understanding of the charge transport pathway within the framework and the key properties that determine the performance of conductive MOFs in photoelectric devices remain underexplored. Herein, we report the mechanisms of photoinduced charge transport and electron dynamics in the conductive 2D M−HHTP (M=Cu, Zn or Cu/Zn mixed; HHTP=2,3,6,7,10,11‐hexahydroxytriphenylene) MOFs and their correlation with photoconductivity using the combination of time‐resolved terahertz spectroscopy, optical transient absorption spectroscopy, X‐ray transient absorption spectroscopy, and density functional theory (DFT) calculations. We identify the through‐space hole transport mechanism through the interlayer sheet π–π interaction, where photoinduced hole state resides in HHTP ligand and electronic state is localized at the metal center. Moreover, the photoconductivity of the Cu−HHTP MOF is found to be 65.5 S m −1 , which represents the record high photoconductivity for porous MOF materials based on catecholate ligands.

Wang, Denan↗
DOE OSTI2023

Revealing Excited‐State Trajectories on Potential Energy Surfaces with Atomic Resolution in Real Time

Abstract Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited‐state trajectories of a diplatinum complex featuring photo‐activated metal–metal σ ‐bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide‐angle X‐ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited‐state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non‐equilibrium processes along excited‐state trajectories involving multiple excited‐state PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dominant Role of Hole Transport Pathway in Achieving Record High Photoconductivity in Two‐Dimensional Metal–Organic Frameworks

Abstract Metal–organic frameworks (MOFs) with mobile charges have attracted significant attention due to their potential applications in photoelectric devices, chemical resistance sensors, and catalysis. However, fundamental understanding of the charge transport pathway within the framework and the key properties that determine the performance of conductive MOFs in photoelectric devices remain underexplored. Herein, we report the mechanisms of photoinduced charge transport and electron dynamics in the conductive 2D M−HHTP (M=Cu, Zn or Cu/Zn mixed; HHTP=2,3,6,7,10,11‐hexahydroxytriphenylene) MOFs and their correlation with photoconductivity using the combination of time‐resolved terahertz spectroscopy, optical transient absorption spectroscopy, X‐ray transient absorption spectroscopy, and density functional theory (DFT) calculations. We identify the through‐space hole transport mechanism through the interlayer sheet π–π interaction, where photoinduced hole state resides in HHTP ligand and electronic state is localized at the metal center. Moreover, the photoconductivity of the Cu−HHTP MOF is found to be 65.5 S m −1 , which represents the record high photoconductivity for porous MOF materials based on catecholate ligands.

14 SOLAR ENERGY↗
DOE OSTI2020

Spectroscopic Characterisation of a Bio-Inspired Ni-Based Proton Reduction Catalyst Bearing a Pentadentate N 2 S 3 Ligand with Improved Photocatalytic Activity

Inspired by the sulfur-rich environment found in active hydrogenase enzymes, a Ni-based proton reduction catalyst with pentadentate N 2 S 3 ligand was synthesised. When coupled with [Ru(bpy) 3 ] 2+ (bpy=2,2 '-bipyridine) as photosensitiser and ascorbate as electron donor in a 1:1 mixture of dimethylacetamide and aqueous ascorbic acid/ascorbate buffer, the catalyst showed improved photocatalytic activity compared with a homologous counterpart bearing a tetradentate N 2 S 2 ligand. The mechanistic pathway of photoinduced hydrogen evolution was comprehensively analysed through optical transient absorption and time-resolved X-ray absorption spectroscopy, which revealed important electronic and structural changes in the catalytic system during photoirradiation. Furthermore, the Ni-II catalyst undergoes a photoinduced metal-centred reduction to form a Ni-I intermediate with distorted square-bipyramidal geometry. Further kinetic analyses revealed differences in charge-separation dynamics between the pentadentate and tetradentate forms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Laser-Induced Photoreduction of Iron(III) Oxide Nanoparticles Enhanced by the Presence of Organic Chromophores

Light-induced electron transfer between chromophoric organic matter and Fe(III)-oxides lies at the heart of aqueous Fe(II) fluxes in the photic zone of natural systems. Understanding this photoreductive dissolution process is also essential for developing water purification techniques based on this class of materials. Previously, optical transient absorption spectroscopy (TAS) measurements revealed that sub-picosecond relaxation times of photo-excited rhodamine B (RhB) dye increased when sorbed onto hematite nanoparticles (HNPs), consistent with electron transfer to the oxide. Here, in the present study, we exploit time-resolved X-ray absorption spectroscopy (XAS) at the Fe K-edge to follow the Fe oxidation state for this same process to (i) confirm that RhB photoexcitation leads to interfacial electron transfer and Fe reduction; and (ii) quantify the lifetime of injected electrons as a function of solution conditions. Regardless of RhB dye availability and pH, direct band gap photoexcitation of HNPs yields an Fe(II)-like small polaronic absorption signature with a lifetime of ~ 1 ns, an order of magnitude longer than previously reported. However, when RhB is present at low pH under conditions where dye favorably interacts with the positively charged hematite surface, a second relaxation process approaching microsecond timescales is observed that likely represents back-reaction with the photoexcited adsorbed dye. At pH above neutral, the efficiency of the interfacial electron transfer is diminished by weaker interaction between sorbed dye and particle surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗