Search NASA⌕ Search

SEARCH · Search NASA

Results for “PETROLEUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Photostability of Ambient-Processed, Conjugated Polymer Electrochromic Devices Encapsulated by Bioderived Barrier Films

Polymer-based electrochromic devices (ECDs) are a promising technology for enabling low-voltage, disposable displays, yet are currently limited by photo-oxidative bleaching of the active materials. Here, renewable barrier films composed of cellulose and chitin are presented as an alternative to poly(ethylene terephthalate) (PET) for encapsulating ECDs. To assess barrier film effectiveness, lateral ECDs composed of poly(3,4-propylenedioxythiophene-(CH 2 OEtHx) 2 ) (P(ProDOT)) active layers were constructed and encapsulated with a multilayer barrier consisting of chitin nanofibers and cellulose nanocrystals spray cast onto a cellulose acetate substrate (oxygen transmission rate (OTR) = 29 cm 3 m –2 day –1 ), a commercially available PET film (OTR = 8.5 cm 3 m –2 day –1 ), and a high-performance PET-Al 2 O 3 multilayer barrier film (OTR < 1 cm 3 m –2 day –1 ). The photodegradation of the P(ProDOT) active layer was determined by measuring the evolution of the colorimetric contrast (ΔE*) and switching speeds as a function of light exposure (100 mW cm –2 , AM 1.5 G light). Photodegradation was found to proceed at a similar rate for all encapsulated devices (roughly 10 times more slowly than unencapsulated devices), highlighting the opportunity for replacing petroleum packaging with bioderived barrier films. Analysis of the switching kinetics, the shifts in optical absorbance, and evidence of chemical degradation indicate that both photochemical breakdown of the electrolyte and cross-linking of the P(ProDOT) active material are key drivers for loss of device performance when oxygen flux to the active material is limited. Furthermore, pathways toward better understanding photodegradation are then proposed with sustainability in mind for future ECD design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Product Characteristics and Synergy Study on Supercritical Methanol Liquefaction of Lignocellulosic Biomass and Plastic

Bio-oil originating from lignocellulosic biomass (LCB) is a potential next-generation fuel because of its abundant, renewable, and sustainable resources compared to other types. However, these bio-oils are typically of low quality compared to petroleum-derived oils due to their low calorific value, high acidity, and oxygen content. This work intends to provide a feasible method for producing hydrocarbon-rich oils by supercritical methanol (scMeOH) coliquefaction of LCB and plastic waste. Both rice straw (RS) and linear low-density polyethylene (LLDPE) are coliquefied under 300 °C for 60 min in scMeOH at various RS/LLDPE mass ratios of 2:1, 1:1, and 1:2. Positive effects were found in terms of oil yield and fuel quality, such as higher hydrocarbons content and calorific value. The oil yield increased from 26.72 to 30.07 wt % with LLDPE addition of 67%. Around 79.15–92.24% of the oil was hydrocarbons, phenols, ketones, and diverse functional group compounds. The complex compounds led to various degrees of the synergetic effect on oil chemical compositions. Among various RS/LLDPE ratios in this work, RS/LLDPE of 1:2 was supposed to be an optimal ratio for hydrocarbon-rich fuel production because it presented the highest oil yield of 30.07 wt % and quality-high oil with 71.42% hydrocarbons. In addition, scMeOH coliquefaction of LCB and plastic waste shows a synergetic effect on the improvement of carbon and hydrogen contents in solid products. These results indicate that scMeOH coliquefaction of LCB with plastic is a feasible and promising means to improve fuel quality and also to realize the thermal recycling of plastic wastes.

09 BIOMASS FUELS↗
DOE OSTI2022

Effect of the Lignin Structure on the Physicochemical Properties of Lignin-Grafted-Poly(ε-caprolactone) and Its Application for Water/Oil Separation

Lignin-grafted poly(ε-caprolactone) copolymers (lignin-g-PCLs) have shown wide application potentials in coatings, biocomposites, and biomedical fields. However, the structural heterogeneity of lignin affecting the structures and properties of lignin-g-PCL has been scarcely investigated. In this study, kraft lignin is fractionated into four precursors, namely, F ins , F1, F2, and F3, with declining molecular weights and increased hydroxyl contents. Lignin-g-PCLs are synthesized via ring-opening polymerization of ε-caprolactone with lignin and characterized by GPC, FTIR, 1 H and 31 P NMR, DSC, TGA, and iGC. The mechanical properties, UV barrier, and enzymatic biodegradability of the lignin-g-PCLs are evaluated. Results show that lignin with a higher molecular weight and aliphatic OH favors the copolymerization, leading to lignin-g-PCLs with longer PCL arms. Moreover, lignin incorporation improves the thermal stability, hydrophobicity, and UV-blocking ability but reduces the lipase hydrolyzability of the copolymers. We also demonstrated that the lignin-g-PCL-coated filter paper could successfully separate chloroform–, petroleum ether–, and hexane–water mixtures with an efficiency up to 99.2%. The separation efficiency remains above 90% even after 15 cycles. The structural differences of copolymers derived from the fractionation showed minimal influence on the separation efficiency. This work provides new insights into lignin-based copolymerization and the versatility of lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Green Needle Coke Production from Pyrolysis Biocrude toward Bio-based Anode Material Manufacture: Biochar Fines Addition Effect as “Physical Template” on the Crystalline Order

Here, a new method for producing green needle coke (GNC) is developed by replacing the “heavy fraction” of petroleum pitch delayed coking with fast pyrolysis biocrude. A series of alternative biocrude distillation, carbonization, and calcination conditions were investigated to determine the influence of these processing parameters onto the crystalline structure of the resulting graphitized material. For the first time, the addition of biochar fines was found to serve as a “physical template” to increase the graphitic nature of the final product. During the initial biocrude carbonization (350–450 °C), volatile compounds are released, and aromatics in pyrolysis biocrude experience condensation, resulting in GNC solids with carbon contents above 95 wt % and some early lamellar structure. In the second stage of the thermal process (25–1500 °C), there are additional thermal decomposition reactions with an increase in the aromatic nature of the graphitized solid. It was found that systematic addition of biochar fines induces a nucleating effect during the GNC development. Thermogravimetric analysis suggests that biochar fines promote polycondensation reactions by modifying the biopitch structure and molecular weight, while elemental analysis (CHN) shows a reduction in both H/C and O/C ratios which are consistent with the increase in aromaticity and removal of oxygenated compounds as thermal treatment evolves. The effects of different bio-based pitch materials (after distillation) and GNC intermediates were evaluated by pyrolysis-gas chromatography mass spectrometry and Fourier transform infrared, displaying slight changes on product yields and quality. X-ray diffraction patterns taken after graphitization evidence an increase in the graphitic order with the addition of biochar fines. Transmittance electron microscopy depicts an improvement on graphitic morphology as biochar fine content increases. The use of biochar fines showed a significant increase in graphitic ordering at addition levels above 0.01 wt %. These results show that thermally treated biocrude/biochar fine systems can produce graphitic structures (hard carbon-like) that might be suitable for the manufacture of sodium-ion batteries.

09 BIOMASS FUELS↗
DOE OSTI2025

Lignin-Derived Methoxyterephthalates for Performance-Advantaged Polymers and Plasticizers

Lignin-derived aromatic carboxylic acids can be produced from oxidative catalytic processes and are promising building blocks for performance-advantaged bioproducts that leverage their inherent heteroatom functionalities. Here, we synthesize 2-methoxyterephthalate and 2,6-dimethoxyterephthalate derivatives by electrochemical carboxylation of guaiacyl- and syringyl-derived lignin monomers obtained from the oxidative deconstruction of lignin. These methoxylated terephthalates are evaluated as comonomers in poly(ethylene terephthalate) (PET) and as plasticizers that could replace petrochemically-derived isophthalate and phthalate, respectively. Specifically, we copolymerize 2-methoxy- and 2,6-dimethoxyterephthalate with dimethyl terephthalate to form several PET copolymers, both of which enable the properties of PET to be tuned, with an incorporation beyond 25% producing amorphous polyesters. At 10 mol % loading in the copolymers, we demonstrate that the bioderived comonomers exhibit comparable behavior to isophthalic acid, a commonly used comonomer in PET, by lowering the crystallinity and melting temperature. Moreover, methoxyterephthalate esters (2-ethylhexyl and butyl) are compared to phthalate and terephthalate ester counterparts used as poly(vinyl chloride) (PVC) plasticizers. The bioderived plasticizers are comparable to the petroleum-derived incumbents in reducing the glass transition temperature and increasing the thermal stability of PVC. Furthermore, the dimethoxyterephthalic esters are expected to have an extended lifetime in the polymer matrix due to their lower volatility and lower diffusion coefficients calculated by molecular dynamic simulations. These results demonstrate that the isophthalate and phthalate components in polyesters and plasticizers, respectively, could be substituted with biobased methoxyterephthalate derivatives.

09 BIOMASS FUELS↗
DOE OSTI2025

Algae Asphalt to Enhance Pavement Sustainability and Performance at Subzero Temperatures

This paper evaluates the potential of algae-derived biobinders as sustainable alternatives for pavement construction. It specifically examines the physicochemical and rheological properties of biomodified binders and their potential to offset carbon emissions when used as partial replacements for conventional petroleum-based asphalt binders. Biosequestration of CO 2 using microalgal cell factories is a promising way of recycling CO 2 into biomass via photosynthesis. Our study demonstrates that incorporating algae-derived binders into asphalt can significantly reduce carbon emissions. Each 1% increase in algae-based biobinder leads to an approximate 4.5% decrease in net carbon emissions. This indicates that a blend containing about 22% biobinder has the potential to achieve carbon neutrality. Blends with higher proportions may even result in net-negative emissions, highlighting a promising strategy for environmentally responsible road construction. In terms of performance, the study shows that certain algae-derived biobinders significantly enhance the cracking resistance of asphalt, particularly under subzero temperatures, by improving its stress-relief capacity. A key contribution of this work is the introduction of polarizability as a novel molecular-level parameter for assessing the compatibility of algae-derived bio-oils with asphalt. By capturing the electronic responsiveness of bio-oil molecules, polarizability serves as a predictive indicator of their interaction potential with asphalt components, providing a new dimension for evaluating the binder performance at the molecular scale. Among the tested materials, the biobinder derived from Haematococcus pluvialis demonstrated particularly strong improvements in resistance to permanent deformation under repeated loading conditions analogous to traffic-induced stress, as well as enhanced resistance to moisture-induced damage. In conclusion, these findings advance the chemistry-driven design of biomass-based binders and highlight a promising pathway toward the development of low-carbon, high-performance, and sustainable infrastructure materials.

Algae↗
DOE OSTI2025

Enhancing Biopolyester Backbone Rigidity with an Asymmetric Furanic Monomer

Biobased furanic polyesters can exhibit performance advantages over petroleum-derived polyesters, primarily due to their rigid furan-containing backbones. Herein, we develop two strategies to polymerize methyl 5-hydroxymethyl furanoate to poly(5-hydroxymethyl furanoate) (PHMF), a furan-based polyester with even greater backbone rigidity than poly(ethylene furanoate). Thermal, spectroscopic, and computational investigations of PHMF alongside analogous furan-based and phenyl-based polyesters suggest that the high furan content of PHMF leads to its high glass transition temperature, slow crystallization kinetics, and low amorphous mobility. Molecular dynamics simulations suggest that while the backbone of PHMF is exceptionally rigid, its amorphous phase is denser than its phenyl analog due to noncovalent interchain interactions. Together, these results highlight how asymmetric furan-based monomers can modulate key properties in biobased polyesters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isotopic Studies for Tracking Biogenic Carbon during Co-processing of Biomass and Vacuum Gas Oil

Co-processing bio-oils with petroleum-derived feeds in the existing multitrillion dollar refining and distribution infrastructure is an attractive option for introducing renewable energy into the fuels marketplace. Considerable research on co-processing bio-oils and vacuum gas oil (VGO) in fluid catalytic cracking units (FCC) using equilibrium catalysts (E-Cats) demonstrated that biomass-derived molecules decreased activity of and increased carbon laydown on E-Cat. In this work, 13 C-labeled biomass was co-processed with VGO using either an E-Cat or a proprietary zeolite Johnson Matthey catalyst (CP758), which is optimzed for upgrading biomass vapors in a riser reactor, to evaluate the fate of biogenic carbon in FCC products. The results from both catalysts indicate that biogenic carbon was incorporated into alkenes and aromatic hydrocarbons. While no biogenic carbon was found in linear alkanes, it was observed in cycloalkanes during experiments with E-Cat but not with CP758. All produced CO2 was biogenic as was most of the carbon laydown on the catalysts. Several partially deoxygenated biomass compounds, such as alkylphenols and benzofurans, unexpectedly contained small amounts of carbon from VGO. Although this study was conducted with labeled biomass and not bio-oil, it provides insights to reaction mechanisms for co-processing bio-oil and VGO in an FCC, which is required to develop catalysts that efficiently convert bio-oil components during FCC co-processing. This work also demonstrates that comprehensive catalyst development utilizing both biomass- and fossil-derived feeds is required to maximize the incorporation of biogenic carbon into transportation fuels.

09 BIOMASS FUELS↗
DOE OSTI2021

Chapter 4: Chemical Recycling of PET

The circular economy of poly(ethylene terephthalate) (PET) today is dominated by collection, sorting, cleaning, melting, and re-processing of transparent bottles via mechanical recycling. This has a better environmental impact as assessed by Life Cycle Assessment (LCA) (e.g. uses less non-renewable energy and produces less greenhouse gases) than production of virgin resin and is the preferred method of recycling wherever possible. However, not all PET products can be recycled this way and there is forecast to be a large shortfall between supply of high quality recycled PET (rPET) and the demands of large users who have made commitments to use more recycled resin over the next 5 - 10 years. Consequently, there is renewed interest, and increased activity, in chemical recycling, where waste PET is depolymerized, and the monomer(s) are purified and repolymerized into resin equivalent to that from petroleum-derived raw materials. The LCA is likely to be not as favorable as traditional mechanical recycling, but will likely be better than virgin PET and the process can be applied to a broader range of lower value wastes and thus promises to dramatically increase the overall recycling rate. In this chapter we will review the processes used in chemical recycling of PET, with the VolCat process from IBM as a detailed case study, followed by descriptions of the alternative technologies and emerging players in the field.

chemical recycling↗
DOE OSTI2022

Bioenabled Platform to Access Polyamides with Built-In Target Properties

The diversification of platform chemicals is key to today’s petroleum industry. Likewise, the flourishing of tomorrow’s biorefineries will rely on molecules with next-generation properties from biomass. Herein, we explore this opportunity with a novel approach to monomers with custom property enhancements. Cyclic diacids with alkyl and aromatic decorations were synthesized from muconic acid by Diels-Alder cycloaddition and copolymerized with hexamethylenediamine and adipic acid to yield polyamides with built-in hydrophobicity and flame retardancy. Testing shows a 70% reduction in water uptake and doubling of char production while largely retaining other key properties of the parent Nylon-6,6. In conclusion, the present approach can be generalized to access a wide range of performance-advantaged polyamides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Positional Isomer of P3HB by Stereoselective Polymerization of Racemic α-Methyl-β-propiolactone Delivers Polyethylene-like Properties

Biobased and biodegradable poly(3-hydroxybutyrolactone) (P3HB) has long been considered as a more sustainable alternative to petroleum-based, nonbiodegradable polyolefins, but its properties are far off from its polyolefin (polyethylene, PE, and polypropylene, PP) counterpart’s unique set of thermal (low T g below −20 °C and high T m > 100 °C) and mechanical (high ductility >350%) characteristics. Here, we report that a positional isomer of P3HB, poly(3-hydroxy-2-methylpropionate) (P3H2MP), synthesized by catalyst-controlled stereoselective polymerization of racemic α-methyl-β-propiolactone, can match that demanding set of thermomechanical properties of PE. In particular, isotactic-rich P3H2MP, readily synthesized under ambient conditions, reaches high M n close to one million Da, T g down to −25 °C, T m up to 115 °C, tensile strength up to 64 MPa, and toughness up to 131 MJ m –3 , thus mechanically outperforming PE while maintaining a comparable low T g and high T m combination. A P3H2MP-based triblock copolymer further widens the low-high temperature window from T g = −29 °C to T m = 186 °C, resembling those of PP. These results show that P3H2MP exhibits the unique combination of thermomechanical properties matching those of high-performance polyolefins.

Biopolymers↗
DOE OSTI2021

Potential Link Between 2020 Mentone, West Texas M5 Earthquake and Nearby Wastewater Injection: Implications for Aquifer Mechanical Properties

Abstract The M5 Mentone earthquake that occurred on March 26, 2020, was the largest event recorded over the last 2 decades in West Texas within the Delaware Basin, a U.S. major petroleum‐producing area. Also, numerous hydrofracturing and wastewater disposal wells are spread across this region. Within a 30 km distance to mainshock, eight class‐II injection wells for industrial wastewater disposal target the deep porous Ellenburger aquifer at an average rate of 1.36 × 10 6 barrel (BBL) per month during 2012–2020. Poroelastic models of fluid diffusion show these nearby injectors collectively imparted up to 80.5 kPa of Coulomb stress at the mainshock location, capable of triggering this M5 event. Assuming the Mentone event occurs when pore‐pressure increase is maximum, the time delay between peak injection and the M5 occurrence corresponds with an optimal permeability of 6.76 × 10 ‐14 m 2 for the Ellenburger aquifer layer, in agreement with independent estimates.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

The Global Biogeochemical Cycle of Rhenium

Here, this paper is the first comprehensive synthesis of what is currently known about the different natural and anthropogenic fluxes of rhenium (Re) on Earth's surface. We highlight the significant role of anthropogenic mobilization of Re, which is an important consideration in utilizing Re in the context of a biogeochemical tracer or proxy. The largest natural flux of Re derives from chemical weathering and riverine transport to the ocean (dissolved = 62 × 10 6 g yr -1 and particulate = 5 × 10 6 g yr -1 ). This review reports a new global average [Re] of 16 ± 2 pmol L -1 , or 10 ± 1 pmol L -1 for the inferred pre-anthropogenic concentration without human impact, for rivers draining to the ocean. Human activity via mining (including secondary mobilization), coal combustion, and petroleum combustion mobilize approximately 560 × 10 6 g yr -1 Re, which is more than any natural flux of Re. There are several poorly constrained fluxes of Re that merit further research, including: submarine groundwater discharge, precipitation (terrestrial and oceanic), magma degassing, and hydrothermal activity. The mechanisms and the main host phases responsible for releasing (sources) or sequestrating (sinks) these fluxes remain poorly understood. This study also highlights the use of dissolved [Re] concentrations as a tracer of oxidation of petrogenic organic carbon, and stable Re isotopes as proxies for changes in global redox conditions.

58 GEOSCIENCES↗
DOE OSTI2020

Isobutanol production freed from biological limits using synthetic biochemistry

Cost competitive conversion of biomass-derived sugars into biofuel will require high yields, high volumetric productivities and high titers. Suitable production parameters are hard to achieve in cell-based systems because of the need to maintain life processes. As a result, next-generation biofuel production in engineered microbes has yet to match the stringent cost targets set by petroleum fuels. Removing the constraints imposed by having to maintain cell viability might facilitate improved production metrics. Here, we report a cell-free system in a bioreactor with continuous product removal that produces isobutanol from glucose at a maximum productivity of 4 g L –1 h –1 , a titer of 275 g L –1 and 95% yield over the course of nearly 5 days. These production metrics exceed even the highly developed ethanol fermentation process. Our results suggest that moving beyond cells has the potential to expand what is possible for bio-based chemical production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microbial production of megadalton titin yields fibers with advantageous mechanical properties

Manmade high-performance polymers are typically non-biodegradable and derived from petroleum feedstock through energy intensive processes involving toxic solvents and byproducts. While engineered microbes have been used for renewable production of many small molecules, direct microbial synthesis of high-performance polymeric materials remains a major challenge. Here we engineer microbial production of megadalton muscle titin polymers yielding high-performance fibers that not only recapture highly desirable properties of natural titin (i.e., high damping capacity and mechanical recovery) but also exhibit high strength, toughness, and damping energy — outperforming many synthetic and natural polymers. Structural analyses and molecular modeling suggest these properties derive from unique inter-chain crystallization of folded immunoglobulin-like domains that resists inter-chain slippage while permitting intra-chain unfolding. These fibers have potential applications in areas from biomedicine to textiles, and the developed approach, coupled with the structure-function insights, promises to accelerate further innovation in microbial production of high-performance materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Climate, air quality, and equity benefits from hydrogen substitution for fossil fuels used in process heat

Fossil fuel combustion for process heat in heavy industry accounts for ~15% of all United States CO 2 emissions and emits PM 2.5 and its precursors, emissions that have a disproportionate impact on minority populations. Decarbonizing process heat in the U.S. via hydrogen substitution presents an opportunity to reduce emissions of CO 2 and PM 2.5 and mitigate resulting exposure disparity. Here, we show that hydrogen substitution in steelmaking provides a large reduction in CO 2 emissions and air quality-related premature mortality, while hydrogen substitution in petroleum refining substantially benefits disadvantaged communities. When reductions in CO 2 emissions and premature mortality are monetized using standard regulatory values, we find that the sum of air pollution and climate benefits outweighs the difference in private cost associated with hydrogen substitution in steelmaking, regardless of the method of hydrogen production. The approach developed here can support evaluations of equity-focused decarbonization strategies in other industries and for specific sites.

08 HYDROGEN↗
DOE OSTI2025

Catalytic closed-loop recycling of polyethylene-like materials produced by acceptorless dehydrogenative polymerization of bio-derived diols

Petroleum-derived polyolefins exhibit diverse properties and are the most important and largest volume class of plastics. However, polyolefins are difficult to efficiently recycle or break down and are now a persistent global contaminant. Broadly replacing polyolefins with bio-derived and degradable polyethylene-like materials is an important yet challenging endeavour towards sustainable plastics. Here, in this study, we report a solution for circular bio-based polyethylene-like materials synthesized by acceptorless dehydrogenative polymerization from linear and branched diols and their catalytic closed-loop recycling. The polymerization and depolymerization processes utilize earth-abundant manganese complexes as catalysts. These materials exhibit a wide range of mechanical properties, encompassing thermoplastics to plastomers to elastomers. The branched diols, produced through a thiol-ene click reaction, can be polymerized to plastics with significantly enhanced tensile properties, toughness and adhesive properties. These materials could be depolymerized back to monomers through hydrogenation and were separatable with a monomer recovery of up to 99%, unaffected by the presence of dyes and additives. Overall, this system establishes a route to more sustainable plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Coupling dinitrogen and hydrocarbons through aryl migration

A persistent challenge in chemistry is to activate abundant molecules such as hydrocarbons and atmospheric N 2 , because these compounds are often inert. In particular, forming C–N bonds from N 2 typically requires a reactive organic precursor, which limits the ability to design catalytic cycles. In this article, we report an diketiminate-supported iron system that is able to sequentially activate benzene and N 2 , forming aniline derivatives. The key to this new coupling reaction is the partial silylation of a reduced iron-N 2 complex, which is followed by migratory insertion of a benzene-derived phenyl group to the nitrogen. Further reduction releases the nitrogen products, and the iron product can re-enter the resulting cyclic pathway. Using a mixture of sodium powder, crown ether, and trimethylsilyl bromide, an easily prepared diketiminate iron bromide complex can mediate the one-pot conversion of several petroleum-derived liquid compounds into the corresponding silylated aniline derivatives using N 2 as the nitrogen source. Numerous compounds along the cyclic pathway have been isolated and crystallographically characterized; their reactivity outlines the mechanism including the hydrocarbon activation step and the N 2 functionalization step. This new strategy incorporates nitrogen atoms from N 2 directly into abundant hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗