Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROGRAMMER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Contribution of space platforms to a ground and airborne remote-sensing programme over active Italian volcanoes

ERTS-1 imagery of the volcanic areas of southern Italy was used primarily for the evaluation of space platform capabilties in the domains of regional geology, soil and rock-type classification and, more generally, to study the environment of active volcanoes. The test sites were selected and equipped primarily to monitor thermal emission, but ground truth data was also collected in other domains (reflectance of rocks, soils and vegetation). The test areas were overflown with a two channel thermal scanner, while a thermo camera was used on the ground to monitor the hot spots. The primary goal of this survey was to plot the changes in thermal emission with time in the framework of a research program for the surveillance of active volcanoes. However, another task was an evaluation of emissivity changes by comparing the outputs of the two thermal channels. These results were compared with the reflectance changes observed on multispectral ERTS-1 imagery.

Cassinis, R.↗
NASA NTRS1974

HAL/S programmer's guide

HAL/S is a programming language developed to satisfy the flight software requirements for the space shuttle program. The user's guide explains pertinent language operating procedures and described the various HAL/S facilities for manipulating integer, scalar, vector, and matrix data types.

Newbold, P. M.↗
NASA NTRS1974

The development and demonstration of hybrid programmable attitude control electronics

HYPACE provides an adaptable, analog/digital design approach that permits preflight and in-flight accommodation of mission changes, component performance variations, spacecraft changes, etc., through programing. This enabled broad multimission flexibility of application in a cost-effective manner. The HYPACE design, which was demonstrated in breadboard form on a single-axis gas-bearing spacecraft simulation, uses a single control channel to perform the attitude control functions sequentially, thus significantly reducing the number of component parts over hard-wired designs. The success of this effort resulted in the concept being selected for the Mariner/Jupiter/Saturn 1977 spacecraft application.

Smith, L. S.↗
NASA NTRS1974

Programmers manual for static and dynamic reusable surface insulation stresses (resist)

Programming information for the RESIST program for the dynamic and thermal stress analysis of the space shuttle surface insulation is presented. The overall flow chart of the program, overlay chart, data set allocation, and subprogram calling sequence are given along with a brief description of the individual subprograms and typical subprogram output.

Ogilvie, P. L.↗
NASA NTRS1975

Apollo experience report: Guidance and control systems. Mission control programmer for unmanned missions AS-202, Apollo 4, and Apollo 6

An unmanned test flight program required to evaluate the command module heat shield and the structural integrity of the command and service module/Saturn launch vehicle is described. The mission control programer was developed to provide the unmanned interface between the guidance and navigation computer and the other spacecraft systems for mission event sequencing and real-time ground control during missions AS-202, Apollo 4, and Apollo 6. The development of this unmanned programer is traced from the initial concept through the flight test phase. Detailed discussions of hardware development problems are given with the resulting solutions. The mission control programer functioned correctly without any flight anomalies for all missions. The Apollo 4 mission control programer was reused for the Apollo 6 flight, thus being one of the first subsystems to be reflown on an Apollo space flight.

Holloway, G. F.↗
NASA NTRS1975

SSME structural computer program development: BOPACE programmer manual

The programming manual for the two-dimensional Boeing Plastic Analysis Capability for Engines (BOPACE) program written in FORTRAN IV is presented. The BOPACE flow logic is summarized along with subroutines and input/output files. Emphasis is placed on linear equation solver routines written as an independent package.

Source record↗
NASA NTRS1974

Systems cost/performance analysis (study 2.3). Volume 3: Programmer's manual and user's guide

The systems cost/performance model was implemented as a digital computer program to perform initial program planning, cost/performance tradeoffs, and sensitivity analyses. The computer is described along with the operating environment in which the program was written and checked, the program specifications such as discussions of logic and computational flow, the different subsystem models involved in the design of the spacecraft, and routines involved in the nondesign area such as costing and scheduling of the design. Preliminary results for the DSCS-II design are also included.

Janz, R. F.↗
NASA NTRS1974

COMOC: Three dimensional boundary region variant, programmer's manual

The three-dimensional boundary region variant of the COMOC computer program system solves the partial differential equation system governing certain three-dimensional flows of a viscous, heat conducting, multiple-species, compressible fluid including combustion. The solution is established in physical variables, using a finite element algorithm for the boundary value portion of the problem description in combination with an explicit marching technique for the initial value character. The computational lattice may be arbitrarily nonregular, and boundary condition constraints are readily applied. The theoretical foundation of the algorithm, a detailed description on the construction and operation of the program, and instructions on utilization of the many features of the code are presented.

Orzechowski, J. A.↗
NASA NTRS1977

Oral annunciator with programmable vocabulary

Voice (analog) signal is converted to its digital equivalent and stored in solid state memory. Upon command, memory becomes part of annunciator system which includes other digital logic, digital-to-analog converter, and audio amplifier.

Paslay, D.↗
NASA NTRS1977

Low-power programmable high-voltage supply

Converter is used to energize group of proportional-counter event-detection tubes. Supply is programmed by using output signal of low voltage digital-to-analog converter. Programming voltage ranges from 1.53 to 2.91 V in 127 0.0108 mV steps, and it is used to control converter high voltage output which ranges from 700 to 1,335 V in like number of increments.

Stout, D. F.↗
NASA NTRS1975

Thailand National Programme of the Earth Resources Technology Satellite

The author has identified the following significant results. Forest inventory of Thailand was completed in January 1975, using LANDSAT-1 imagery and ground truth survey. Results showed the existing forest covers only 37% of the land area. The last country-wide survey using aerial survey photographs at 1:60,000 scale conducted in 1961 gave the figure of 58%. ERTS-1 imagery showed that Thailand's mangrove forest covers an area of approximately 3130 sq k. The previous aerial survey showed 3681 sq k of mangroves.

Sabhasri, S.↗
NASA NTRS1975

Systems cost/performance analysis; study 2.3. Volume 3: Programmer's manual and user's guide

The implementation of the entire systems cost/performance model as a digital computer program was studied. A discussion of the operating environment in which the program was written and checked, the program specifications such as discussions of logic and computational flow, the different subsystem models involved in the design of the spacecraft, and routines involved in the nondesign area such as costing and scheduling of the design were covered. Preliminary results for the DSCS-2 design are also included.

Source record↗
NASA NTRS1976

Thailand national programme of the Earth Resources Technology Satellite

The author has identified the following significant results. The study on locating hill tribe villages from LANDSAT imagery was successful and exceeded the initial expectations. Results of the study on land use and forest mapping using Skylab data demonstrated the capability and feasibility of large scale mapping with high accuracy.

Sabhasri, S.↗
NASA NTRS1976

Thermal APU/hydraulics analysis program. User's guide and programmer's manual

The User's Guide information plus program description necessary to run and have a general understanding of the Thermal APU/Hydraulics Analysis Program (TAHAP) is described. This information consists of general descriptions of the APU/hydraulic system and the TAHAP model, input and output data descriptions, and specific subroutine requirements. Deck setups and input data formats are included and other necessary and/or helpful information for using TAHAP is given. The math model descriptions for the driver program and each of its supporting subroutines are outlined.

Deluna, T. A.↗
NASA NTRS1976

Developing space occupancy - Perspectives on NASA future space programme planning

NASA planning aspects of potential future manned space flight missions are examined and the necessity of long-range planning is pointed out. A listing of desirable future activities is considered, taking into account the permanent occupancy of near-earth orbit space, the permanent occupancy of earth-moon space, the full self-sufficiency of man in geolunar space, and the permanent occupancy of heliocentric space. The technological requirements for the considered activities are discussed, giving attention to transportation, habitation, engineering technology, life sciences, operations technology, and advanced management concepts. A description of future program phasing and advanced studies requirements is also given.

Von Puttkamer, J.↗
NASA NTRS1976

The IMS satellite programme - Scientific objectives

The International Magnetospheric Study (IMS) will make use of a number of satellites launched by the ESA, Japan, the USA, and the USSR. The instrumentation carried by these satellites is considered, taking into account GEOS, ISEE-A, ISEE-B, ISEE-C, EXOS-A, EXOS-B, and ISS. The morphology of the magnetosphere is examined and questions regarding the origin of substorms are investigated. IMS objectives are discussed, giving attention to the macroscopic behavior of the magnetosphere, microscopic processes, approaches to be used for monitoring the state of the magnetosphere, and magnetosphere-ionosphere coupling.

Russell, C. T.↗