Ferroelectric Phase Content in 7 nm Hf (1- x ) Zr x O 2 Thin Films Determined by X-Ray-Based Methods
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Search NASA
Results for “Phase 1”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Exploiting the Liquid Phase to Enhance the Cross-Coupling of Alcohols over Nanoporous Gold Catalysts
Controlling selectivity in the cross-coupling of two similar compounds is a classic challenge in heterogeneous catalysis. Here it is shown that the phase in which the catalysis is performed has a dramatic impact on the selectivity of the oxidative coupling of alcohols to esters over unsupported nanoporous gold catalysts, affording nearly optimal cross-coupling to a single ester at equimolar concentrations in the liquid. Operation in the liquid vs the gas phase affects 1) the relative C-H activation rates of methoxy and 1-propoxy, 2) the fraction of C-H activation which leads to esters vs aldehydes, and 3) the fraction of esters which result from cross-coupling vs self-coupling. While activation of the critical adsorbed reactive alkoxy intermediate is faster for 1-propoxy than methoxy in both phases, the liquid phase is more effective in coupling the resulting aldehyde with adsorbed methoxy or 1-propoxy to yield an ester. Additionally, operation in the liquid phase promotes cross-coupling to methyl propionate, whereas in the gas-phase self-coupling of 1-propanol to propyl propionate is favored. The promotion of self-coupling in the gas phase results from the stabilization of larger alkoxides on the surface by Au-alkyl van der Waals forces. However, such forces do not appear dominant in the liquid phase, as evidenced by similar cross-coupling selectivities of methanol with ethanol, 1-propanol, and 1-butanol. Introducing steric hindrance into the higher alcohol (i.e., 2-methyl-1-propanol) further promotes cross-coupling. Here, this promotion is attributed to a kinetic preference for an aldehyde to couple with less-hindered alkoxides. Altogether, these findings demonstrate that alcohol cross-coupling selectivities are strongly impacted by the phase in which the catalysis is conducted, thus altering the phase provides opportunities for selective and efficient chemical syntheses.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Microstructure evolution in U-10Zr alloy irradiated by swift Xe ions at 700 °C
The post-irradiation examination (PIE) results of U-10Zr binary metallic fuel that was irradiated by 84 MeV Xe ions at 700 °C are reported here. The U-10Zr specimen was synthesized by homogenizing elemental U and Zr powders through arc-melting. The as-fabricated U-10Zr was dominated by the sub-micron acicular α+ δ phase. After being irradiated by 84 MeV Xe ions at 700 °C up to 2.19 ×10 17 ions/cm 2 fluence, the U-10Zr was speculated to evolve into micro-scale γ 1 + γ 2 phases as predicted by the U-Zr phase diagram. During post-irradiation cooling, the U-rich γ 1 phase was mainly transformed to the αphase, while the Zr-rich γ 2 phase was partially retained along with formation of hexagonal structure phase (δ or ω). Xe bubbles formed in the γ 1 and γ 2 phases have salient different morphologies, implying faster Xe diffusion in the γ 1 phase than the γ 2 phase. The quantitative bubble morphology data collected in this study can provide valuable references for the development and validation of fuel performance models for this fuel.
36 MATERIALS SCIENCE↗
A prediction of the thermodynamic, thermophysical, and mechanical properties of CrTaO 4 from first principles
It is reported that the self-forming CrTaO 4 oxide scale can protect refractory high-entropy alloys from oxidation, superior to Cr 2 O 3 . In this paper, the phase stability, mechanical, and thermal properties of three polymorphous phases of CrTaO 4 are systematically investigated from first-principles density functional theory calculations. The mechanical properties predicted using the strain–energy methods indicated that all three phases are mechanically stable. The temperature dependence of elastic constants and polycrystalline moduli of three phases demonstrated the thermal softening as temperature increase. The Helmholtz-free energies as a function of volume and temperature are derived from phonon dispersions within the quasi-harmonic approximation at six strained volumes. The calculated apparent bulk coefficients of thermal expansion of these three phases are evaluated, the highest value approximately 13.4× 10 –6 K –1 within a temperature range of 500–2000 K for the rutile I4 1 md phase. The lattice thermal conductivity calculated by the Debye–Callaway model suggested that the rutile type I4 1 md phase has the lowest value of approximately 2.1 W/m/K at 1800 K. The other two phases, C2/m and P2/c, exhibit higher values due to relatively lower Grüneisen parameters and larger phonon velocities. The melting point of CrTaO 4 is predicted to be between 1975 and 2449 K using ab initio molecular dynamics simulations. Finally, this work provides a comprehensive theoretical understanding of the thermodynamic, mechanical, and thermal properties for the new material CrTaO 4 and serves as an example of a viable computational design strategy for improved oxidation resistance of refractory alloys at high temperatures.
36 MATERIALS SCIENCE↗
High-pressure polymorphism in pyridine
Single crystals of the high-pressure phases II and III of pyridine have been obtained by in situ crystallization at 1.09 and 1.69 GPa, revealing the crystal structure of phase III for the first time using X-ray diffraction. Phase II crystallizes in P 2 1 2 1 2 1 with Z ′ = 1 and phase III in P 4 1 2 1 2 with Z ′ = ½. Neutron powder diffraction experiments using pyridine-d 5 establish approximate equations of state of both phases. The space group and unit-cell dimensions of phase III are similar to the structures of other simple compounds with C 2v molecular symmetry, and the phase becomes stable at high pressure because it is topologically close-packed, resulting in a lower molar volume than the topologically body-centred cubic phase II. Phases II and III have been observed previously by Raman spectroscopy, but have been mis-identified or inconsistently named. Raman spectra collected on the same samples as used in the X-ray experiments establish the vibrational characteristics of both phases unambiguously. The pyridine molecules interact in both phases through CH...π and CH...N interactions. The nature of individual contacts is preserved through the phase transition between phases III and II, which occurs on decompression. A combination of rigid-body symmetry mode analysis and density functional theory calculations enables the soft vibrational lattice mode which governs the transformation to be identified.
36 MATERIALS SCIENCE↗
Low-temperature high-frequency dynamic magnetic susceptibility of classical spin-ice Dy 2 Ti 2 O 7
In this study, radio-frequency (14.6 MHz) AC magnetic susceptibility, , of Dy 2 Ti 2 O 7 was measured using self-oscillating tunnel-diode resonator. Measurements were made with the excitation AC field parallel to the superimposed DC magnetic field up to 5 T in a wide temperature range from 50 mK to 100 K. At 14.6 MHz, a known broad peak of from kHz—range audio-frequency measurements around 15 K for both [111] and [110] directions shifts to 45 K, continuing the Arrhenius activated behavior with the same activation energy barrier of E a ≈ 230 K. Magnetic field dependence of along [111] reproduces previously reported low-temperature two-in-two-out to three-in-one-out spin configuration transition at about 1 T, and an intermediate phase between 1 and 1.5 T. The boundaries of the intermediate phase show reasonable overlap with the literature data and connect at a critical endpoint of the first order transition line, suggesting that these features are frequency independent. An unusual upturn of the magnetic susceptibility at T → 0 was observed in magnetic fields between 1.5 T and 2 T for both magnetic field directions, before fully polarized configuration sets in above 2 T.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Medium and Heavy Duty Vehicle Powertrain Electrification and Fleet Demonstration
The Contract Award Grant # EE0007513 dated 2 June, 2016 is for the design, development and demonstration of medium duty package delivery vehicles that will result in a 100% increase in fuel economy as measured in miles per gallon. The project was proposed in 3 phases over two budget periods. The Phases were: 1. Modeling and Simulation – This phase was completed and formed the basis of the specifications for the design and build of the physical systems. The modeling and simulation was conducted by AVL and used real world package delivery routes that AVL mapped. The motors, battery pack, range extender and balance of plant support systems were modeled and iterated until a system with the desired fuel economy improvement was realized. Early design of the major subsystems using the actual vehicle space constraints was also completed. This phase was successfully completed in May of 2017. 2. 1st Build and FE Confirmation - This phase was completed and resulted in the final design, release, procurement and build of all major vehicle systems for commissioning into the first vehicle. The work was a partnered effort between McLaren and AVL. McLaren built the eAxle system while AVL built the range extender and integrated the range extender, battery and balance of plant sub-systems into the first vehicle with a control system to make it operate. Prior to the end of this phase a real world HIL system test gave evidence that the fuel economy improvement would be achieved in the real world. This phase was exited with a 7 month delay due mostly to procurement and supply base issues and ended in May, 2018. 3. Final Build and Demonstration - This phase included the final build and commissioning of the four program vehicles and the operation of a demonstration on a set of routes near San Diego California. During this phase, a multitude of issues arose in different systems in the vehicle. These issue resolution exercises were quite complex and caused repeated delays but were all successfully completed. It should also be noted that an early commercialization analysis resulted in the conclusion that the complexity of the system would not make it cost effective, leading to the start of a follow-on design that used newly available component technologies to specify a more cost effective system. This design will be repurposed and put into demonstration on a separately (non-DOE) funded program. It was decided and agreed with DOE that this phase should be considered completed. The knowledge and know-how gained on this program has been incorporated into and transferred to the new program. This phase and the entire program was considered closed on June 1, 2021.
33 ADVANCED PROPULSION SYSTEMS↗
Data supporting manuscript from L. Sheneman, G. Stephanopoulos, A.E. Vasdekis titled "Deep learning classification of lipid droplets in quantitative phase images" as currently under review at PLOS ONE. This includes: 1) raw and binary labeled Quantitative Phase Images (QPI) of Y. lipolytica cells used in the analyses described within the manuscript. 2) various derived data including classifier scores, etc.
Data supporting manuscript from L. Sheneman, G. Stephanopoulos, A.E. Vasdekis titled "Deep learning classification of lipid droplets in quantitative phase images" as currently under review at PLOS ONE. This includes: 1) raw and binary labeled Quantitative Phase Images (QPI) of Y. lipolytica cells used in the analyses described within the manuscript. 2) various derived data including classifier scores, etc.
ANN↗
Density Dependence of the Phases of the v = 1 Integer Quantum Hall Plateau in Low Disorder Electron Gases
Recent magnetotransport measurements in low-disorder electron systems confined to GaAs/AlGaAs samples reveal that the v = 1 integer quantum Hall plateau is broken into three distinct regions. These three regions are associated with two phases with different types of bulk localization: the Anderson insulator is due to random quasiparticle localization, and the integer quantum Hall Wigner solid is due to pinning of a stiff quasiparticle lattice. Universal properties of the v = 1 plateau are highlighted: the structure of the stability diagram, the nonmonotonic dependence of the activation energy on the filling factor, and the alignment of features of the activation energy with features of the stability regions of the different phases are found to be similar in three samples spanning a wide range of electron densities. Quantitative differences between the samples are also discussed, such as the dependence of the onset temperature and the activation energy of the integer quantum Hall Wigner solid on the electron density. The findings provide insights into the localization behavior along the v = 1 integer quantum Hall plateau in the low disorder regime.
Anderson insulator↗
Performance study of a 3×1×1 m 3 dual phase liquid Argon Time Projection Chamber exposed to cosmic rays
We report the results of the analyses of the cosmic ray data collected with a 4 tonne (3×1×1 m 3 ) active mass (volume) Liquid Argon Time-Projection Chamber (TPC) operated in a dual-phase mode. We present a detailed study of the TPC's response, its main detector parameters and performance. The results are important for the understanding and further developments of the dual-phase technology, thanks to the verification of key aspects, such as the extraction of electrons from liquid to gas and their amplification through the entire one square metre readout plain, gain stability, purity and charge sharing between readout views.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Directed gas phase preparation of ethynylallene (H 2 CCCHCCH; X 1 A') via the crossed molecular beam reaction of the methylidyne radical (CH; X 2 Π) with vinylacetylene (H 2 CCHCCH; X 1 A')
The gas-phase bimolecular reaction of the methylidyne (CH; X 2 Π) radical with vinylacetylene (H 2 CCHCCH; X 1 A') was conducted at a collision energy of 20.3 kJ mol –1 under single collision conditions exploiting the crossed molecular beam experimental results merged with ab initio electronic structure calculations and ab initio molecular dynamics (AIMD) simulations. The laboratory data reveal that the bimolecular reaction proceeds barrierlessly via indirect scattering dynamics through long-lived C 5 H 5 reaction intermediate(s) ultimately dissociating to C 5 H 4 isomers along with atomic hydrogen with the latter predominantly originating from the vinylacetylene reactant as confirmed by the isotopic substitution experiments in the D1-methylidyne–vinylacetylene reaction. Combined with ab initio calculations of the potential energy surface (PES) and statistical Rice–Ramsperger–Kassel–Marcus (RRKM) calculations, the experimental determined reaction energy of –146 ± 26 kJ mol –1 along with the distribution minimum of T(θ) at 90° and isotopic substitution experiments suggest ethynylallene (p1; ΔrG = –230 ± 4 kJ mol –1 ) as the dominant product. The ethynylallene (p1) may be formed with extensive rovibrational excitation, which would result in a lower maximum translational energy. Further, AIMD simulations reveal that the reaction dynamics leads to p1 (ethynylallene, 75%) plus atomic hydrogen with the dominant initial complex being i1 formed by methylidyne radical addition to the double C[double bond, length as m-dash]C bond in vinylacetylene. Altogether, combining the crossed molecular beam experimental results with ab initio electronic structure calculations and ab initio molecular dynamics (AIMD) simulations, ethynylallene (p1) is expected to represent the dominant product in the reaction of the methylidyne (CH; X 2 Π) radical with vinylacetylene (H 2 CCHCCH; X 1 A').
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Double band inversion in the topological phase transition of Ge 1-x Sn x alloys
Abstract We use first-principles simulation and alchemical mixing approximation to reveal the unique double band inversion and topological phase transition in Ge Sn alloys. Wave function parity, spatial charge distribution and surface state spectrum analyses suggest that the band inversion in Ge Sn is relayed by its first valence band. As the system evolves from Ge to -Sn, its conduction band moves down, and inverts with the first and the second valence bands consecutively. The first band inversion makes the system nontrivial, while the second one does not change the topological invariant of the system. Both of the band inversions yield surface modes spanning the individual inverted gaps, but only the surface mode in the upper gap associates with the nontrivial nature of tensile-strained -Sn.
Physics↗
Intrinsic and hard magnetic properties of (Sm 1-x R x )-Fe-Co-V alloys (R = Gd, Zr, and Y)
SmFe 12 -based compounds with the ThMn 12 -type structure have a great potential as future rare-earth-lean permanent magnets. However, their reliance on stabilizing non-magnetic elements has impeded practical applications. Therefore, elements such as Gd, Y, and Zr have gained popularity as candidates to minimize the need for stabilizing elements by reducing the formation energy of the ThMn 12 (1:12) phase. Here, this study examines the effect of Gd, Y, and Zr on the intrinsic and hard magnetic properties in (Sm 1-x R x ) 1.2 Fe 8.4 Co 2.1 V 1.5 (or with nominal composition of (Sm 1-x R x ) 9.1 Fe 63.6 Co 15.9 V 11.4 ) with a single 1:12 phase for 0 ≤ x ≤ 0.3. Notably, samples substituted with Gd exhibit an enhanced temperature dependence of the magnetic properties.
36 MATERIALS SCIENCE↗
High temperature superconductivity in the candidate phases of solid hydrogen
As the simplest element in nature, unraveling the phase diagram of hydrogen is a primary task for condensed matter physics. As conjectured many decades ago, in the low-temperature and high-pressure part of the phase diagram, solid hydrogen is expected to become metallic with a high superconducting transition temperature. The metallization may occur via band gap closure in the molecular solid or via a transition to the atomic solid. Recently, a few experimental studies pushed the achievable pressures into the 400–500 GPa range. There are strong indications that at some pressure in this range metallization via either of these mechanisms occurs, although there are disagreements between experimental reports. Furthermore, there are multiple good candidate crystal phases that have emerged from recent computational and experimental studies which may be realized in upcoming experiments. Therefore, it is crucial to determine the superconducting properties of these candidate phases. In a recent study, we reported the superconducting properties of the C2/c-24 phase, which we believe to be a strong candidate for metallization via band gap closure. Here, we report the superconducting properties of the Cmca-12, Cmca-4 and I4 1 /amd-2 phases including the anharmonic effects using a Wannier function-based dense k-point and q-point sampling. Here we find that the Cmca-12 phase has a superconducting transition temperature that rises from 86 K at 400 GPa to 212 K at 500 GPa, whereas the Cmca-4 and I4 1 /amd-2 phases show a less pressure-dependent behavior with their T c in the 74–94 K and 307–343 K ranges, respectively. These properties can be used to distinguish between crystal phases in future experiments. Understanding superconductivity in pure hydrogen is also important in the study of high-T c hydrides.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Truncation effects in the charge representation of the O(2) model
The O(2) model in Euclidean space-time is the zero-gauge-coupling limit of the compact scalar quantum electrodynamics. In this work, we obtain a dual representation of it called the charge representation. We study the quantum phase transition in the charge representation with a truncation to “spin $\textit{S}$," where the quantum numbers have an absolute value less than or equal to $\textit{S}$. The charge representation preserves the gapless-to-gapped phase transition even for the smallest spin truncation $\textit{S}$ = 1. The phase transition for $\textit{S}$ = 1 is an infinite-order Gaussian transition with the same critical exponents $\textit{δ}$ and $\textit{η}$ as the Berezinskii-Kosterlitz-Thouless (BKT) transition, while there are true BKT transitions for $\textit{S}$ ≥ 2 . The essential singularity in the correlation length for $\textit{S}$ = 1 is different from that for $\textit{S}$ ≥ 2 . The exponential convergence of the phase-transition point is studied in both Lagrangian and Hamiltonian formulations. We discuss the effects of replacing the truncated $\hat{U}^±$ = exp ($± i\hat{θ}$) operators by the spin ladder operators $\hat{S}^±$ in the Hamiltonian. The marginal operators vanish at the Gaussian transition point for $\textit{S}$ = 1, which allows us to extract the $\textit{η}$ exponent with high accuracy.
36 MATERIALS SCIENCE↗
Heterostructural Alloy Phase Diagram for (Cd 1-x Zn x ) 3 As 2
Alloying the topological semimetal Cd 3 As 2 with Zn 3 As 2 provides a potential route for controlling the electronic properties. We predict the alloy phase diagram from first-principles calculations, considering that both end members have a crystal structure derived from the antifluorite lattice, but with different arrangements of the unoccupied cation sites. To overcome the limitations of the regular solution approximation and to include short-range order effects, we perform Monte Carlo simulations, parameterize the temperature dependence of the mixing enthalpy ΔH m , and perform thermodynamic integration of the free energy. The resulting phase diagram exhibits features that are unique to heterostructural alloy systems and provides computational predictions of solubility limits and composition ranges that are stable against spinodal decomposition.
36 MATERIALS SCIENCE↗
Microstructure and Hard Magnetic Properties of Sm 1-x Zr x (Fe,Co) 11.3-y Ti 0.7 By Ingots and Thick Melt-Spun Ribbons
Permanent magnets made from Sm(Fe,Co) 12 -based compounds are being actively pursued through nanostructuring and powder metallurgy. This study was aimed at the development of hard magnetic properties in bulk as-cast alloys and in melt-spun alloys for very low wheel speeds. Slower solidification rates and alloying with Zr promote the tetragonal ThMn 12 -type crystal structure, whereas higher solidification rates and alloying with B replace the ThMn 12 structure type with the TbCu 7 structure type. When introduced simultaneously, Zr and B dramatically reduce the alloy solidification rates required for both the refinement of the 1:12 crystallites and their replacement with the 1:7 phase. In bulk arc-melted alloys, this allowed for a microstructure of separated 1:12 crystallites 1–3 μm in size, although, because of the ferromagnetic nature of a minority phase, the coercivity of these fine-grained alloys reached only 0.73 kOe. A moderately accelerated solidification further refined the 1:12 crystallites and increased the coercivity; a Sm 0.7 Zr 0.4 (Fe,Co) 10.8 Ti 0.7 B 0.5 alloy exhibited a coercivity of 1.5 kOe and a maximum energy product of 3.4 MGOe when it was melt-spun into a 0.26-mm-thick ribbon. A more rapid solidification suppressed the 1:12 phase and after annealing at 800–850 °C, the alloys modified with Zr and B developed reasonably high coercivity and maximum energy product even when melt-spun at a wheel speed of 6 m/s. For the above-mentioned alloy, these values were 4.1 kOe and 7.8 MGOe, respectively. Further, a similarly processed very-Sm-lean Sm 0.5 Zr 0.6 (Fe,Co) 10.6 Ti 0.7 B 0.7 alloy exhibited a remanence of 8.8 kG and an energy product of 7.4 MGOe.
36 MATERIALS SCIENCE↗
Domain wall dynamics in tungsten trioxide: Evidence for polar domain walls
Domain walls have distinct properties from the bulk, and tailoring them to suit the needs for device applications is critical. Tungsten trioxide, WO 3 , is of great interest for device applications that make use of domain wall properties; it exhibits a phenomenologically rich sequence of phase transitions, virtually all of which are ferroelastic in character, resulting in many sets of domain walls at low temperatures, each with their own unique properties. Domain wall motion and its contribution to the piezoelectric response have been investigated in WO 3 from 300 to 180 K using resonant ultrasound spectroscopy (RUS) and resonant piezoelectric spectroscopy (RPS), which showed that the P 2 1 / n , P 1 ¯ , and P 2 1 / c phases give a piezoelectric response despite the bulk being nominally centrosymmetric. Second harmonic generation (SHG) confirmed that polarity was strongest within the domain walls, and additional weak signals were found in the domains. Domain wall mobility was investigated in the P b c n , P 2 1 / n , and P 2 1 / c phases from 685 to 5 K. Domain walls in the P 2 1 / n and P 1 ¯ were more mobile than those in the P b c n and P 2 1 / c structures, and soon after the P 1 ¯ → P 2 1 / c transition the walls become pinned at ∼ 140 K . Published by the American Physical Society 2024
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗