Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pioneer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Early results of Pioneer 10 particulate experiments.

On March 2, 1972 the Pioneer 10 spacecraft was launched on an interplanetary trajectory to encounter Jupiter late in 1973. The spacecraft carries four experiments designed to measure interplanetary particulates in a wide range of sizes from submicron to millimeter diameters. One experiment measures individual particulates by reflected sunlight. Two measure the aggregate particulates by scattered sunlight, while the fourth measures penetrations caused by individual particles. All have been collecting data from one to beyond four astronomical units. The data includes the first in situ measurements of small particulates in the Asteroid Belt. The results of the early analyses will be presented with particular emphasis on the distribution in the Asteroid Belt and its comparison to the interplanetary particulate distribution between the orbits of Earth and Mars.

Soberman, R. K.↗

Pioneer 8 observations and interpretations of sixteen interplanetary shock waves observed in 1968.

A study has been made of 16 interplanetary shock waves observed in 1968 by Pioneer 8 at large distances from earth. A comparison with the shapes of interplanetary shock fronts obtained by De Young and Hundhausen (1971) suggests that in general the ejection of flare gas occurs within a cone of half-angle between 30 and 60 deg. For near-earth events a deflection of the shock front has been observed, possibly owing to an interaction with the bow shock. The average duration of the postshock perturbation is about 20 hours. Strong magnetic fields and rapid fluctuations occur during the first 6 to 12 hours. Electric field perturbations in the VLF band are also noted during these periods. There is limited evidence for one corotating shock in these data.

Bavassano, B.↗

Observations of zodiacal light from the Pioneer 10 Asteroid-Jupiter probe - Preliminary results.

The imaging photopolarimeter on the Pioneer 10 Asteroid-Jupiter probe is being used to measure starlight and zodiacal light during the cruise phase of the mission. The 2.5-cm-diam telescope is used with a 2.3 deg field of view to spin/scan the sky in the region between 10 and 151 deg from the direction of motion of the spacecraft. Orthogonal components of brightness are measured in two wavelength bands: blue (3900 to 5000 A) and red (5950 to 7200 A). The gegenschein was observed on Mar. 14, 1972, when the earth-sun-spacecraft angle was 3.4 deg and the spacecraft was 9.2 million km from the earth and 1.011 AU from the sun. The distribution of brightness relative to the antisolar point is similar to that obtained from ground-based observations. Taken together, these results show that the gegenschein is not associated with the earth.

Weinberg, J. L.↗

Jupiter's radiation belts: Can Pioneer 10 survive?

Model calculations of Jupiter's electron and proton radiation belts indicate that the Galilean satellites can reduce particle fluxes in certain regions of the inner magnetosphere by as much as six orders of magnitude. Average fluxes should be reduced by a factor of 100 or more along the Pioneer 10 trajectory through the heart of Jupiter's radiation belts in early December. This may be enough to prevent serious radiation damage to the spacecraft.

Hess, W. N.↗

Study of the effects of condensation on the performance of Pioneer Venus probe windows

The transmission loss of Pioneer Venus Probe radiation windows if their exposed surfaces become contaminated with droplets of water, hydrochloric acid, sulfuric acid, and mercury which may be found in the Venusian atmosphere was investigated. Transmission loss was studied as a function of mass concentration of liquid droplets deposited on one surface of test window materials while the wavelength of the transmitting radiation is in the range of 0.3 to 30 microns. The parameters that affect the transmittance of radiation through a window are: (1) particle size, (2) surface concentration of particles, (3) wavelength of the radiation, (4) angle of acceptance of the radiation by the detector, and (5) the refractive index of the aerosol.

Testerman, M. K.↗

Pioneer 10 observations of the solar wind interation with Jupiter

Pioneer 10 Plasma Analyzer experiment flight data during the Jupiter flyby are presented. The observations show that the interaction of Jupiter's magnetic field with the solar wind is similar in many ways to that at earth, but the scale size is over 100 times larger. Jupiter is found to have a detached standing bow shock wave of high Alfven Mach number. Jupiter has a prominent magnetopause which deflects the magnetosheath plasma and excludes its direct entry into the Jovian magnetosphere. The sunward hemisphere of Jupiter's outer magnetosphere is found to be highly inflated with thermal plasma and a high beta region which is highly responsive to changes in solar wind dynamic pressure. Observational arguments are presented which tend to discount a thin disklike magnetosphere but, rather, favor a Jovian magnetosphere, albeit probabily considerably flattened as compared to the earth's magnetosphere, yet still with reasonable thickness. Results concerning the shock jump conditions, the magnetosheath flow field and inferred internal magnetospheric plasma are presented.

Wolfe, J. H.↗

System design of the Pioneer Venus spacecraft. Volume 2: Science

The objectives of the low-cost Pioneer Venus space probe program are discussed. The space mission and science requirements are analyzed. The subjects considered are as follows: (1) the multiprobe mission, (2) the orbiter mission, (3) science payload accomodations, and (4) orbiter spacecraft experimental interface specifications. Tables of data are provided to show the science allocations for large and small probes. Illustrations of the systems and components of various probe configurations are included.

Acheson, L. K.↗

System design of the Pioneer Venus spacecraft. Volume 3: Systems analysis

The mission, systems, operations, ground systems, and reliability analysis of the Thor/Delta baseline design used for the Pioneer Space Probe are discussed. Tradeoff decisions concerning spin axis orientation, bus antenna design, communication system design, probe descent, and reduced science payload are analyzed. The reliability analysis is made for the probe bus mission, large probe mission, and small probe mission. Detailed mission sequences were established to identify critical areas and provide phasing of critical operation.

Fisher, J. N.↗

System design of the Pioneer Venus spacecraft. Volume 5: Probe vehicle studies

A summary of the key issues and studies conducted for the Pioneer Venus spacecraft and the resulting probe designs are presented. The key deceleration module issues are aerodynamic configuration and heat shield material selection. The design and development of the pressure vessel module are explained. Thermal control and science integration of the pressure vessel module are explained. The deceleration module heat shield, parachute and separation/despin are reported. The Thor/Delta and Atlas/Centaur baseline descriptions are provided.

Nolte, L. J.↗

System design of the Pioneer Venus spacecraft. Volume 6: Power subsystem studies

Selection of a baseline power subsystem for the probe bus, orbiter, and large and small probes has been performed as a part of the Pioneer Venus Mission Systems Design Study. In each case the selection process has involved trades and incorporated the results of previous related studies. Factors considered primary in the selection of each subsystem approach were cost, and the ability of each of the proposed subsystems to perform reliably under the rigors of the space environment, temperature extremes, and high g loads. A trade was made to consider the advantages of an unregulated primary bus versus a regulated bus. The decision to use an unregulated bus was based on cost, weight, and the increase in load isolation achievable through the use of individual load regulators.

Prochaska, H. F.↗

System design of the Pioneer Venus spacecraft. Volume 8: Command/data handling subsystems studies

Study tasks for the command and data handling subsystems have been directed to: (1) determining ground data systems, (GDS) interfaces and deep space network (DSN) changes, if required, (2) defining subsystem requirements, (3) surveying existing hardware that could be used or modified to meet subsystem requirements, and (4) establishing a baseline design. Study of the existing GDS led to the conclusion that the Viking configuration GDS can be used with only minor changes required for the Pioneer Venus baseline. Those changes required are associated with providing a predetection recording capability used during probe entry and descent. Subsystem requirements were first formulated with sufficient latitude so that surveys of existing hardware could lead to low cost hardware which, in turn, could modify more narrowly defined subsystem requirements.

Vesely, D. D.↗

System design of the Pioneer Venus spacecraft. Volume 10: Propulsion/orbit insertion subsystem studies

The Pioneer Venus orbiter and multiprobe missions require spacecraft maneuvers for successful accomplishment. This report presents the results of studies performed to define the propulsion subsystems required to perform those maneuvers. Primary goals were to define low mass subsystems capable of performing the required missions with a high degree of reliability for low cost. A review was performed of all applicable propellants and thruster types, as well as propellant management techniques. Based on this review, a liquid monopropellant hydrazine propulsion subsystem was selected for all multiprobe mission maneuvers, and for all orbiter mission maneuvers except orbit insertion. A pressure blowdown operating mode was selected using helium as the pressurizing gas. The forces associated with spacecraft rotations were used to control the liquid-gas interface and resulting propellant orientation within the tank.

Rosenstein, B. J.↗

System design of the Pioneer Venus spacecraft. Volume 12: International cooperation

A spectrum of plans has been prepared to illustrate the range of practical sharing possibilities available so as to assist Ames Research Center (ARC) and European Space Research Organization (ESRO) in selection of a program meeting mutual goals. Five plans are described showing increased participation by ESRO WITH ascending plan number. Each of these has sharing properties fulfilling particular requirements such as available ESRO budget level, extent of ESRO program responsibility, matching particular ESRO capability, and cost saving to ARC through sharing. All plans apply to orbiter sharing only. A sharing plan based on the model Plan 4 may offer the most attractive division of Pioneer Venus between ARC and ESRO. This plan allows ESRO to bear primary responsibility for the orbiter and to avoid an extensive financial burden. Savings to ARC are commensurate with ARC loss of program control. Duplication of effort is avoided by using orbiter subsystems that are common to the probe bus and orbiter.

Kelly, R. S.↗

System design of the Pioneer Venus spacecraft. Volume 13: Preliminary development plans

This Pioneer Venus Study final report describes the following baseline configurations: (1) Thor/Delta Spacecraft Baseline is the baseline presented at the midterm review on 26 February 1973, (2) Atlas/Centaur Spacecraft Baseline is the baseline resulting from studies conducted since the midterm, but prior to receipt of the NASA execution phase RFP, and subsequent to decisions to launch both the multiprobe and orbiter missions in 1978 and use the Atlas/Centaur launch vehicle, and (3) Atlas/Centaur Spacecraft Midterm Baseline is the baseline presented at the 26 February 1973 review and is only used in the launch vehicle utilization trade study.

Mixon, M. S.↗

System design of the Pioneer Venus spacecraft. Volume 14: Test planning trades

Pioneer Venus system test plans and trade studies which were first published as Study Tasks (References 1 through 5) are reviewed. The plan and trade studies are presented in a condensed form. Greater detail may be found in the referenced study tasks if desired. All significant conclusions and plan outlines of the original studies are, presented.

Pedretti, C. D.↗

Magnetic coordinates for the Pioneer 10 Jupiter encounter

The magnetic coordinates of the Pioneer 10 spacecraft and the five innermost satellites are reported for the Jupiter encounter. The D sub 2 offset is used to make the calculations. Magnetic coordinates are needed for the interpretation of the trapped particle measurements, including the absorption effects of the satellites. Contours of constant field magnitude and magnetic latitude are given at the surface of Jupiter for the D sub 2 model. The system 3 longitude of a spacecraft at Jupiter is derived, and formulas given for the relationships between system 1, 2, and 3 longitudes. The longitude of the magnetic dipole increases by about 3 deg per year, due to the inaccurate rotation rate used to define system 3 longitude.

Mead, G. D.↗

Systems design study of the Pioneer Venus spacecraft. Volume 1. Technical analyses and tradeoffs, sections 1-4 (part 1 of 4)

The results are reported of the Pioneer Venus studies from 2 October 1972 through 30 June 1973. Many missions were considered, involving two launch vehicles (Thor/Delta and Atlas/Centaur), and different launch opportunities and spacecraft configurations to meet varying science requirements, all at minimum cost. The sequence of events is described and the specific studies conducted are summarized. The effects of science payload on mission and spacecraft design are discussed along with the mission analyses.

Source record↗