Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymeric Materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A Polymer Degradation and Remanufacturing Experiment in the High School Classroom

Most students enter college without any exposure to polymer science, which leads to the poor understanding and slow implementation of plastic recycling programs in the United States. Here, to address the knowledge gap in chemical recycling, we introduce a 2-part laboratory experiment that was conducted in multiple high schools and public outreach events to demonstrate the depolymerization of PET via aminolysis and the remanufacturing of cleaved PET fragments into a new aramid polymer. Student experiences were evaluated with two postlab assignments.

Hands-on Learning↗
DOE OSTI2025

Development of Crown Ether-Functionalized Polymeric Sorbents for Lithium-Ion Capture

The purpose of this Cooperative Research and Development Agreement (CRADA) was to develop and demonstrate new synthetic strategies for fabricating lithium-selective polymeric adsorbents by covalently incorporating crown ether functionalities into durable, processable support materials. These advanced sorbents are designed to selectively extract lithium ions (Li⁺) from dilute aqueous sources such as brine, seawater, industrial wastewater, and battery recycling streams.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Towards libraries of different ultrasmall amorphous silica cage topologies

Cage topology controlled at the nanometer length scale is expected to enable original functionalities, e.g., in catalysis and therapeutics. Cages are fundamental structural motifs of clathrates and their topological duals, Frank-Kasper phases, and are constituents of mesoporous silica frameworks. However, with one exception, they have not been synthesized as discrete particles. By varying reactant ratios of surfactant, oil, and silane, we report the discovery of 5(12)6(2) and 5(12)6(8) amorphous silica polyhedra, each coexisting with the previously identified 5(12) cage, using combined cryo-transmission electron microscopy (cryo-TEM) and single-particle reconstruction (SPR). Notably, the 5(12)6(8) polyhedron represents a topology not previously observed in mesoporous silica frameworks. Control over structural features is demonstrated, and insights into cage formation mechanisms are provided. Structural outcomes are summarized in a ternary morphology diagram alongside prior results, bridging serendipitous discovery and intentional design of silica cages displaying a level of control over silica polymerization rivaling nature.

Jang, Dong June [Department of Materials Science a↗
DOE OSTI2021

Polymer compositions

Compositions including one or more polymers are provided. Exemplary polymers include polymeric carbon monoxides. The compositions can be prepared by subjecting a source material to x-rays, optionally at increased pressures. The compositions can be used in a variety of applications, such as fuels, optics, and electronics.

Pravica, Michael↗
DOE OSTI2025

Generating forces in confinement via polymerization

Understanding how to produce forces using biomolecular building blocks is essential for the development of adaptive synthetic cells and living materials. Here we ask whether a dynamic polymer system can generate deformation forces in soft shells by pure self-assembly, motivated by the fact that biological polymer networks like the cytoskeleton can exert forces, move objects, and deform membranes by simply growing, even in the absence of molecular motors. We address this question by investigating polymer force generation by varying the release rate, the structure, and the interactions of self-assembling monomers. First, we develop a toy computational model of polymerization in a soft elastic shell that reveals the emergence of spontaneous bundling which enhances shell deformation. We then extend our model to account more explicitly for monomer binding dynamics. We find that the rate at which monomers are released into the interior of the shell is a crucial parameter for achieving deformation through polymer growth. Lastly, we demonstrate that the introduction of multivalent particles that can join polymers can either improve or impede polymer performance, depending on the amount and on the structure of the multivalent particles. Our results provide guidance for the experimental realization of polymer systems that can perform work at the nanoscale, for example through rationally designed self-assembling proteins or nucleic acids.

Osmanović, Dino [University of California at Los A↗
DOE OSTI2021

Light-Mediated Synthesis and Reprocessing of Dynamic Bottlebrush Elastomers under Ambient Conditions

We introduce a novel grafting-through polymerization strategy to synthesize dynamic bottlebrush polymers and elastomers in one step using light to construct a disulfide-containing backbone. The key starting material—α-lipoic acid (LA)—is commercially available, inexpensive, and biocompatible. When installed on the chain end(s) of poly(dimethylsiloxane) (PDMS), the cyclic disulfide unit derived from LA polymerizes under ultraviolet (UV) light in ambient conditions. Significantly, no additives such as initiator, solvent, or catalyst are required for efficient gelation. Formulations that include bis-LA-functionalized cross-linker yield bottlebrush elastomers with high gel fractions (83–98%) and tunable, supersoft shear moduli in the ~20–200 kPa range. An added advantage of these materials is the dynamic disulfide bonds along each bottlebrush backbone, which allow for light-mediated self-healing and on-demand chemical degradation. These results highlight the potential of simple and scalable synthetic routes to generate unique bottlebrush polymers and elastomers based on PDMS.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High Depth‐of‐Discharge Zinc Rechargeability Enabled by a Self‐Assembled Polymeric Coating

Abstract Zinc has the potential for widespread use as an environmentally friendly and cost‐effective anode material pending the resolution of rechargeability issues caused by active material loss and shape change. Here, a self‐assembled Nafion‐coated Celgard 3501 (NC‐Celgard) separator is shown to enable unprecedented cycle life of a Zn anode in alkaline electrolyte at high depth‐of‐discharge (DOD Zn ). Using commercially relevant energy‐dense electrodes with high areal capacities of 60 mAh cm –2 , Zn–Ni cells tested at 20% DOD Zn cells achieve over 200 cycles while 50% DOD Zn cells achieve over 100 cycles before failure. The 20% and 50% DOD cells deliver an average of 132 and 180 Wh L –1 per cycle over their lifetime respectively. Rechargeability is attributed to the highly selective diffusion properties of the 300 nm thick negatively charged Nafion coating on the separator which prevents shorting by dendrites and inhibits redistribution of the active material. Crossover experiments show that the NC‐Celgard separator is practically impermeable to zincate ([Zn(OH) 4 ] 2– ), outperforming commercial Celgard, cellophane, Nafion 211 and 212 separators while still allowing hydroxide transport. This work demonstrates the efficacy of selective separators for increasing the cycle life of energy‐dense Zn electrodes without adding significant volume or complexity to the system.

Arnot, David J.↗
DOE OSTI2021

Synthesis, characterization, and polymerization of capped paddlewheel porous cages

Although paddlewheel-based structures are common among permanently porous metal–organic materials, suitable strategies for the isolation of metal node-terminated, capped paddlewheel-based cage structures remain limited. We explored the use of chelating dicarboxylate ligand derivates (esp) for the isolation of trimesate-linked cages, Mo 12 (btc) 4 (esp) 6 , that are structural analogs of the small octahedral pore of HKUST-1. The porosity of these novel cages is appreciably higher than that of previously reported structures of this type. We also demonstrate that pillaring the isolated cage with DABCO generated an amorphous polymer that featured exceptional thermal stability and enhanced porosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Facile design of renewable lignin copolymers by photoinitiated RAFT polymerization as Pickering emulsion stabilizers

As the richest aromatic renewable resource, lignin has attracted significant attention for fabricating various materials. However, due to lignin's structural complexity, an effective and facile structural modification strategy remains a substantial challenge. Herein, we have successfully applied photoinitiated reversible addition–fragmentation chain transfer (RAFT) as a versatile tool to synthesize amphiphilic lignin copolymers with lignin derivatives as the macroinitiator. The experimental and density functional theory analysis systematically investigated the photopolymerization kinetics, proving excellent control over molecular weights. Additionally, 1 H NMR and FT-IR analyses confirmed the well-designed structures. Moreover, the structures of copolymers were tunable by simple variations of monomer structures. Finally, the self-assembly of the synthesized copolymers into nanoparticles was explored, together with the potential applications as Pickering emulsion stabilizers. Finally, we believe that this work will offer a facile and green approach to synthesize lignin-based novel copolymers and further expand its applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring capabilities of Micro-Fabricated 3D-printed capsules for studying effects of material mix on thermonuclear burn

The introduction of a high-precision, 3D-printing method, known as two-photon polymerization (2PP), has created a new means of producing novel targets to study inertial confinement fusion (ICF). Here, this work aims to explore if 2PP fabricated capsules can meet ICF requirements such as size, uniformity, deuteration degree, and ability to maintain gas fill. Two types of capsules with 3D-printed lattices were evaluated on the Omega-60 Laser Facility: (1) carbon-deuterium-oxygen (CDO) lattice with a H 2 gas fill and (2) carbon-hydrogen-oxygen (CHO) lattice with a D 2 gas fill. Experimental results and numerical simulations, which assumed complete mixing of capsule materials, reasonably agreed for both target types. A further study into the effects of capsule preheat or 2PP geometry on material mix is underway. Our work demonstrates that the unique capabilities of customizable, 3D-printed capsules present promising opportunities for further investigation into more sophisticated mix and burn experiments in ICF.

2PP↗
DOE OSTI2023

Polymer electrolytes based on protic ionic liquids with perfluorinated anions for safe lithium-ion batteries

Here, the quest for safe and high-performance polymer electrolytes in lithium-ion batteries (LIBs) has led researchers to explore protic ionic liquids (PILs) as potential candidates to be entrapped in polymer matrices. In this context, we present an investigation into solid polymeric systems based on poly(methyl methacrylate) (PMMA) as a host for PILs, featuring 1,8-diazabicyclo-[5,4,0]-undec-7-ene (DBU) cation paired with three different anions: bis(trifluoromethanesulfonyl)imide (TFSI – ), trifluoromethanesulfonate (TFO – ), and (trifluoromethanesulfonyl-nonafluorobutylsulfonyl)imide (IM14 – ). Additionally, we explore the lithium-doped IM14-gel-like system to broaden our understanding of these intriguing materials. Through comprehensive thermal analysis, solid-state NMR, and diffusion NMR techniques, we delve into the interactions and structural features of these binary and ternary polymeric systems. Our investigation reveals unique dynamics and ion interactions within the PMMA matrix, shedding light on the potential of these materials for advanced energy storage technologies. Particularly, we highlight the distinctive features of DBUH-IM14 and its specific interaction with the polymeric matrix and the lithium ions, underscoring its significance in advancing safer and more efficient energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2022

Two-Step Thermoresponsive Ultrafiltration Membranes from Polymerization of Lyotropic Liquid Crystals

Here, in this study, we present the fabrication of a two-step thermoresponsive ultrafiltration (UF) membrane through polymerization of a lyotropic liquid crystal (LLC). A mixture of commercially available Pluronic F 127 block copolymer, water (containing ammonium persulfate as the initiator), and polymerizable oil (n-butyl acrylate/ethylene glycol dimethacrylate) is used to create an LLC with a lamellar structure, as characterized by cross-polarized light microscopy and atomic force microscopy. Differential scanning calorimetry is employed to evaluate the thermoresponsive behavior of the polymerized LLC (polyLLC). Two-step thermoresponsiveness (~35 and ~50 °C) of the polyLLC is observed due to the lower critical solution temperature (LCST) of F 127 and melting of the crystalline structure of the polyethylene oxide (PEO) chains of the F 127 surfactant. In the next step, the obtained mesophase is cast on a nonwoven polyester support sheet followed by thermal polymerization. The hydration capacity, water flux, water flux recovery after fouling, and molecular weight cutoff (MWCO) of the obtained membrane are evaluated at different temperatures to examine its thermoresponsiveness. The experimental results reveal that the UF membrane has a reversible thermoresponsive behavior at the LCST and PEO melting of polyLLC. Additionally, the cleaning efficiency of the fouled membrane can be enhanced by using its thermoresponsive behavior, resulting in an extended lifetime of the product. Furthermore, the MWCO of the membrane can be altered with temperature due to the pore size change with temperature stimulus.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Programming van der Waals interactions with complex symmetries into microparticles using liquid crystallinity

Asymmetric interactions such as entropic (e.g., encoded by nonspherical shapes) or surface forces (e.g., encoded by patterned surface chemistry or DNA hybridization) provide access to functional states of colloidal matter, but versatile approaches for engineering asymmetric van der Waals interactions have the potential to expand further the palette of materials that can be assembled through such bottom-up processes. We show that polymerization of liquid crystal (LC) emulsions leads to compositionally homogeneous and spherical microparticles that encode van der Waals interactions with complex symmetries (e.g., quadrupolar and dipolar) that reflect the internal organization of the LC. Experiments performed using kinetically controlled probe colloid adsorption and complementary calculations support our conclusion that LC ordering can program van der Waals interactions by ~20 k B T across the surfaces of microparticles. Because diverse LC configurations can be engineered by confinement, these results provide fresh ideas for programming van der Waals interactions for assembly of soft matter.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ionic conductive polymers as artificial solid electrolyte interphase films in Li metal batteries – A review

Lithium (Li) metal has been considered as the ultimate anode material for next-generation rechargeable batteries due to its ultra-high theoretical specific capacity (3860 mAh g -1 ) and the lowest reduction voltage (-3.04 V vs the standard hydrogen electrode). However, the dendritic Li formation, uncontrolled interfacial reactions, and huge volume variations lead to unstable solid electrolyte interphase (SEI) layer, low Coulombic efficiency and hence short cycling lifetime. Designing artificial solid electrolyte interphase (artificial SEI) films on the Li metal electrode exhibits great potential to solve the aforementioned problems and enable Li–metal batteries with prolonged lifetime. Polymer materials with good ionic conductivity, superior processability and high flexibility are considered as ideal artificial SEI film materials. In this review, according to the ionic conductive groups, recent advances in polymeric artificial SEI films are summarized to afford a deep understanding of Li ion plating/stripping behavior and present design principles of high-performance artificial SEI films in achieving stable Li metal electrodes. Perspectives regarding to the future research directions of polymeric artificial SEI films for Li–metal electrode are also discussed. The insights and design principles of polymeric artificial SEI films gained in the current review will be definitely useful in achieving the Li–metal batteries with improved energy density, high safety and long cycling lifetime toward next-generation energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2023

Interpreting inorganic compositional depth profiles to understand the rate-limiting step in vapor phase infiltration processes

Vapor phase infiltration (VPI) is a post-polymerization modification technique that infuses inorganics into polymers to create organic–inorganic hybrid materials with new properties. Much is yet to be understood about the chemical kinetics underlying the VPI process. The aim of this study is to create a greater understanding of the process kinetics that govern the infiltration of trimethyl aluminum (TMA) and TiCl 4 into PMMA to form inorganic-PMMA hybrid materials. To gain insight, this paper initially examines the predicted results for the spatiotemporal concentrations of inorganics computed from a recently posited reaction–diffusion model for VPI. This model provides insight on how the Damköhler number (reaction versus diffusion rates) and non-Fickian diffusional processes (hindering) that result from the material transforming from a polymer to a hybrid can affect the evolution of inorganic concentration depth profiles with time. Subsequently, experimental XPS depth profiles are collected for TMA and TiCl 4 infiltrated PMMA films at 90 °C and 135 °C. The functional behavior of these depth profiles at varying infiltration times are qualitatively compared to various computed predictions and conclusions are drawn about the mechanisms of each of these processes. TMA infiltration into PMMA appears to transition from a diffusion-limited process at low temperatures (90 °C) to a reaction-limited process at high temperatures (135 °C) for the film thicknesses investigated here (200 nm). While TMA appears to fully infiltrate these 200 nm PMMA films within a few hours, TiCl 4 infiltration into PMMA is considerably slower, with full saturation not occurring even after 2 days of precursor exposure. Infiltration at 90 °C is so slow that no clear conclusions about mechanism can be drawn; however, at 135 °C, the TiCl 4 infiltration into PMMA is clearly a reaction-limited process, with TiCl 4 permeating the entire thickness (at low concentrations) within only a few minutes, but inorganic loading continuously increasing in a uniform manner over a course of 2 days. Near-surface deviations from the uniform-loading expected for a reaction-limited process also suggest that diffusional hindering is high for TiCl 4 infiltration into PMMA. In conclusion, these results demonstrate a new, ex situ analysis approach for investigating the rate-limiting process mechanisms for vapor phase infiltration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Defect-resistant plastic scintillation radiation detector compositions and fabrication methods

Scintillating plastics resistant to crazing and fogging, methods of making and using the same are disclosed. The scintillating plastics include: one or more primary polymers present in an amount ranging from about 40 wt % to about 95 wt %; one or more secondary polymers present in an amount ranging from about 1 wt % to about 60 wt %; and one or more fluors present in an amount ranging from about 0.1 wt % to about 50 wt %. Methods of making such plastics include: creating a homogenous mixture of precursor materials including primary polymer, secondary polymer, and fluor in the amounts set forth above; and polymerizing the homogenous mixture. Methods of using such plastics include: exposing the scintillating plastic to one or more extreme environmental conditions for a predetermined amount of time without generating crazing or fogging within the scintillating plastic. Various additional features and specific embodiments of these inventive concepts are also disclosed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Facile polymerization in a bicellar template to produce polymer nano-rings

We report a well-defined discoidal bicelle composed of three lipids, specifically zwitterionic long-chain 1,2-dipalmitoyl phosphocholine (DPPC) and short-chain 1,2-dihexanoyl phosphocholine (DHPC) doped with anionic 1,2-dipalmitoyl phosphoglycerol (DPPG) provides a generalized template for the synthesis of hydrophobic polymer nano-rings. The lipid molar ratio of DPPC/DHPC/DPPG is 0.71/0.25/0.04. The detailed investigation and discussion were based on styrene but tested on three other vinyl monomers. The structure of nano-rings is identified through the detailed analysis of small angle X-ray/neutron scattering (SAXS and SANS) data and transmission electron micrographs (TEM), supported by the differential scanning calorimetric (DSC) data before and after polymerization. The investigation covers samples with a styrene-to-lipid ratio ranged varied from 1:50 to 1:10.The styrene monomers are initially located at both the discoidal planar (long-chain lipid rich) and rim (short-chain lipid rich) regions. During polymerization, they migrate to the more fluid rim region-section. The formation mechanism involves the interplay of hydrophobic interaction, mismatched miscibility of polystyrene between the ordered and disordered phases, and crystallinity of the long lipid acyl chains. This facile synthesis is proven applicable for several hydrophobic monomers. The well-defined nano-rings greatly enhance the interfacial area and have the potential to be the building blocks for functional materials, if monomers are incorporated with desirable functions, for future applications. Crosslinked polymer nano-rings are produced in well-defined discoidal bicelles. The enhanced immiscibility in the planar region drives the hydrophobic polymers to the fluidic rim. The platform can be generalized for synthesis of other hydrophobic polymer nano-rings.

36 MATERIALS SCIENCE↗