Search NASA⌕ Search

SEARCH · Search NASA

Results for “Propulsion system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Flight experience with Apollo spacecraft propulsion systems

Apollo 17 ended the most successful application of rocket propulsion systems in man's history. A total of 23 developmental and manned operational flights were made. Seven hundred and sixty-three spacecraft rocket engines were flown in the program. Over 6 h of manned rocket flights were logged by the spacecraft propulsion systems and approximately one million rocket engine firings were made. One engine failure was encountered on an early unmanned flight as a result of a failure in the guidance programmer which caused the engine to operate in a manner known to cause failures. Numerous operational problems and malfunctions were observed; however, system and component redundancy prevented loss of mission objectives and never jeopardized crew safety. Performance of all systems was usually nominal and most problems were merely nuisances. This paper will present some highlights of Apollo propulsion performance and will provide a bibliography of all flight results.

Thibodaux, J. G., Jr.↗
NASA NTRS1979

Technology status of a fluorine-hydrazine propulsion system for planetary spacecraft

The basic technology exists and a system integration program is well underway to allow incorporation of a fluorine-hydrazine propulsion system into future spacecraft required for unmanned planetary missions. These spacecraft would be inserted in earth orbit using the Space Transportation System Shuttle and given its initial sendoff by the Inertial Upper Stage (IUS). The design of a typical propulsion system, assessment of thermal and structural impacts on a selected spacecraft and comparative studies with conventional propulsion systems have been completed. A major part of the current JPL Program involves assembly of a 3650 N thrust demonstration system using titanium tanks, flight weight components and structure. This system will be used to demonstrate the state-of-the-art throughout a representative flight system's qualification.

Bond, D. L.↗
NASA NTRS1981

A real time Pegasus propulsion system model for VSTOL piloted simulation evaluation

A Pegasus-Harrier propulsion system is selected as a baseline for developing mathematical modeling and simulation techniques for VSTOL. Initially, static and dynamic propulsion system characteristics are modeled in detail to form a nonlinear aerothermodynamic digital computer simulation of a Pegasus engine. From this high fidelity simulation, a real-time propulsion model is formulated by applying a piecewise linear state variable methodology. A hydromechanical and water injection control system is also simulated. It is noted that the real-time dynamic model includes the detail and flexibility required for evaluating critical control parameters and propulsion component limits over a limited flight envelope.

Mihaloew, J. R.↗
NASA NTRS2005

Discrete Event Supervisory Control Applied to Propulsion Systems

The theory of discrete event supervisory (DES) control was applied to the optimal control of a twin-engine aircraft propulsion system and demonstrated in a simulation. The supervisory control, which is implemented as a finite-state automaton, oversees the behavior of a system and manages it in such a way that it maximizes a performance criterion, similar to a traditional optimal control problem. DES controllers can be nested such that a high-level controller supervises multiple lower level controllers. This structure can be expanded to control huge, complex systems, providing optimal performance and increasing autonomy with each additional level. The DES control strategy for propulsion systems was validated using a distributed testbed consisting of multiple computers--each representing a module of the overall propulsion system--to simulate real-time hardware-in-the-loop testing. In the first experiment, DES control was applied to the operation of a nonlinear simulation of a turbofan engine (running in closed loop using its own feedback controller) to minimize engine structural damage caused by a combination of thermal and structural loads. This enables increased on-wing time for the engine through better management of the engine-component life usage. Thus, the engine-level DES acts as a life-extending controller through its interaction with and manipulation of the engine s operation.

Litt, Jonathan S.↗
NASA NTRS2018

High Specific-Impulse Electrospray Explorer for Deep-Space (HiSPEED): Stage-Based Electrospray Propulsion System for CubeSats

The objective of the High Specific-impulse Electrospray Explorer for Deep-space (HiSPEED) project is to develop an efficient propulsion system to enable deep-space exploration with small satellites. The ion electrospray propulsion system developed at Massachusetts Institute of Technology's (MIT) Space Propulsion Laboratory is one of the first systems to offer compact and efficient propulsion that is compatible with the CubeSat form factor. However, existing thruster heads have lifetimes less than the required firing time for a deep-space mission. Therefore, a stage-based approach is considered where burnt out thruster heads are ejected and replaced, thereby extending the overall lifetime of the propulsion system.

Propulsion↗
NASA NTRS1990

Operationally Efficient Propulsion System Study (OEPSS) data book. Volume 4: OEPSS design concepts

This study was initiated to identify operations problems and cost drivers for current propulsion systems and to identify technology and design approaches to increase the operational efficiency and reduce operations costs for future propulsion systems. To provide readily usable data for the Advanced Launch System (ALS) program, the results of the OEPSS study have been organized into a series of OEPSS Data Books. This volume describes three propulsion concepts that will simplify the propulsion system design and significantly reduce operational requirements. The concepts include: (1) a fully integrated, booster propulsion module concept for the ALS that avoids the complex system created by using autonomous engines with numerous artificial interfaces; (2) an LOX tank aft concept which avoids potentially dangerous geysering in long LOX propellant lines; and (3) an air augmented, rocket engine nozzle afterburning propulsion concept that will significantly reduce LOX propellant requirements, reduce vehicle size and simplify ground operations and ground support equipment and facilities.

Wong, George S.↗
NASA NTRS1983

Space station propulsion system trade study

This study evaluates alternative space station propulsion system options for a range of space station configurational and operational architectures. Space station propulsion requirements ranging from those representative of the first generation space station to those of an advanced space station with a space based OTV are considered. A methodology for comparing the candidate propulsion technologies is developed which considers design/development/qualification and operational costs, system mass, performance, reliability, and other relevant parameters. Advanced propulsion systems are shown to reduce space station costs by providing higher performance but to require a larger front end investment for development and qualification. This study indicates that if the full potential of such systems is to be realized, then low cost implementations of this technology must be developed.

Garrison, P. W.↗
NASA NTRS1978

Optimization and evaluation of main liquid rocket propulsion systems for advanced earth-to-orbit shuttles

A computerized preliminary design system is used to evaluate potential main liquid-rocket propulsion systems for advanced technology winged single-stage-to-orbit launch vehicles. Evaluated are trade-offs between ascent flight trajectory performance and flight vehicle sizing driven by engine mass and propellant requirements. Numerous mission, flight, and vehicle-related requirements and constraints are satisfied in the design process. With the design system, five dual-mode propulsion system concepts are compared to a baseline hydrogen and oxygen system in terms of the changes in vehicle dry mass and gross mass.

Wilhite, A. W.↗
NASA NTRS1994

Development of sensors for ceramic components in advanced propulsion systems

The 'Development of Sensors for Ceramics Components in Advanced Propulsion Systems' program was divided into two phases. The objectives of Phase 1 were to analyze, evaluate and recommend sensor concepts for the measurement of surface temperature, strain and heat flux on ceramic components for advanced propulsion systems. The results of this effort were previously published in NASA CR-182111. As a result of Phase 1, three approaches were recommended for further development: pyrometry, thin-film sensors, and thermographic phosphors. The objectives of Phase 2 were to fabricate and conduct laboratory demonstration tests of these systems. A summary report of the Phase 2 effort, together with conclusions and recommendations for each of the categories evaluated, has been submitted to NASA. Emittance tests were performed on six materials furnished by NASA Lewis Research Center. Measurements were made of various surfaces at high temperature using a Thermogage emissometer. This report describes the emittance test program and presents a summary of the results.

Atkinson, William H.↗
NASA NTRS2008

Aerodynamic Design of a Dual-Flow Mach 7 Hypersonic Inlet System for a Turbine-Based Combined-Cycle Hypersonic Propulsion System

A new hypersonic inlet for a turbine-based combined-cycle (TBCC) engine has been designed. This split-flow inlet is designed to provide flow to an over-under propulsion system with turbofan and dual-mode scramjet engines for flight from takeoff to Mach 7. It utilizes a variable-geometry ramp, high-speed cowl lip rotation, and a rotating low-speed cowl that serves as a splitter to divide the flow between the low-speed turbofan and the high-speed scramjet and to isolate the turbofan at high Mach numbers. The low-speed inlet was designed for Mach 4, the maximum mode transition Mach number. Integration of the Mach 4 inlet into the Mach 7 inlet imposed significant constraints on the low-speed inlet design, including a large amount of internal compression. The inlet design was used to develop mechanical designs for two inlet mode transition test models: small-scale (IMX) and large-scale (LIMX) research models. The large-scale model is designed to facilitate multi-phase testing including inlet mode transition and inlet performance assessment, controls development, and integrated systems testing with turbofan and scramjet engines.

Sanders, Bobby W.↗
NASA NTRS1960

IV. Air-breathing propulsion systems for supersonic aircraft

In this part, the state of the art for several propulsion system components is reviewed, and some of the important factors which must be considered during the design of a supersonic propulsion system are pointed out. The discussion will be centered around the Mach number 3 cruise airplane of part III and the multimission airplane of part II.

Propulsion system↗
NASA NTRS1973

Propulsion system design for the ATT.

The NASA funded Advanced Transport Technology (ATT) systems studies are directed at identifying the optimum propulsion system characteristics required for a low noise, low emissions level engine designed for an advanced commercial transport that employs the supercritical wing technology. This transport could be in service in the late 70s or early 80s and would be designed for transcontinental and international ranges with cruise speeds up to Mach 0.98. This paper reviews the significant results of the propulsion system study, the implications in the propulsion design concept, and the acoustically treated nacelle.

Brines, G. L.↗
NASA NTRS1980

Low-thrust chemical orbit to orbit propulsion system propellant management study

Propellant requirements, tankage configurations, preferred propellant management techniques, propulsion systems weights, and technology deficiencies for low thrust expendable propulsion systems are examined. A computer program was utilized which provided a complete propellant inventory (including boil-off for cryogenic cases), pressurant and propellant tank dimensions for a given ullage, pressurant requirements, insulation requirements, and miscellaneous masses. The output also includes the masses of all tanks; the mass of the insulation, engines and other components; total wet system and burnout mass; system mass fraction; total impulse and burn time.

Dergance, R. H.↗
NASA NTRSDate not supplied

Applications of Nuclear Thermal Propulsion Systems for Deep Space Science Missions

Nuclear thermal propulsion (NTP) systems occupy a unique area in the space propulsion technology landscape, due to their ability to combine moderate-to-high thrust systems normally seen in chemical propulsion systems with specific impulses that are higher than those of more traditional chemical propulsion systems. Thus, NTP systems have the potential to greatly expand our access to deep space and can enable or enhance capabilities for a variety of missions that achieve science goals as outlined in NASA’s decadal surveys. This paper leverages previous work performed on applying NTP systems for multiple science missions. It also expands the mission portfolio to additional NTP-powered science mission profiles, evaluating the system performance benefits delivered by this propulsion option. This paper will also outline efforts to improve the fidelity of the existing NTP design concepts and vehicles that are utilized, leveraging previous work on nuclear propulsion systems for human-Mars missions to enhance the fidelity of results obtained from previous science mission concept studies – specifically Triton lander, solar polar orbiter, and the interstellar medium probe missions. The work outlined in this paper will also examine additional missions that have been highlighted in the recent decadal surveys, which may include robotic missions to the ice giant Uranus, robotic missions to Venus, and missions to various Kuiper belt objects (KBOs).

K A Polzin↗
NASA NTRS1971

Installation and integration of transonic transport propulsion systems.

Initial work indicates that a viable aircraft family can be designed for higher subsonic cruise speeds. Studies to date suggest that the propulsion system/nacelle design and the incorporation of noise attenuation into this design will have more influence on the choice of an optimum engine than engine weight and fuel consumption. These studies also suggest the payoff resulting from the incorporation of new technology items such as the internal engine generator and new structural cowl concepts because of the greater sensitivity to drag. These factors, plus the greater interdependency of the transonic aircraft and its propulsion system, point up the importance of a total system approach to propulsion system optimization and design.

Goodmanson, L. T.↗