Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACTOR OPERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Progress on Grizzly Development for Reactor Pressure Vessels and Reinforced Concrete Structures

The Grizzly code has been under development for the U.S. Department of Energy’s Light Water Reactor Sustainability program to provide predictive tools for the evolution of material degradation in critical light water reactor structural components due to long-term exposure to the environmental conditions of normal reactor operation, and for the effects of this degradation on the safety of these components. This development has primarily targeted reactor pressure vessels and reinforced concrete structures. Work performed during Fiscal Year 2019 added important features for both of these types of structures. For probabilistic fracture mechanics analysis of reactor pressure vessels, capabilities were added to account for the effects of warm prestressing and residual stresses, as well as to model crack initiation, growth, and arrest. For modeling microstructure evolution in reactor pressure vessels, a cluster dynamics model for evolution of Mn-Ni-Si phases has been implemented. For modeling degraded reinforced concrete structures, capabilities to consider the combined effects of damage and creep in the concrete constitutive model and model nonlinear behavior of reinforcing bars has been added. These newly-developed features fill important gaps in Grizzly’s feature set for engineering-scale analysis of degraded reactor pressure vessels and reinforced concrete structures. Grizzly development in both of these areas has reached a point where it is ready for extensive testing on relevant engineering problems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Compendium of HFIR and REDC Infrasound and Low-Frequency Acoustic Emissions

This document is a compilation of infrasound and low-frequency acoustic signatures that characterize select nuclear reactor operations and hot-cell operations observed at Oak Ridge National Laboratory (ORNL) in fiscal year 2018. Also included here are the results of digital signal analyses describing these signatures. This effort provides insight about the feasibility of using acoustic signatures for local and remote-sensing and identification of nuclear fuel-cycle operations. The signatures included here, in this first year of on-site observations at ORNL, will become part of the broader basis set of signatures collected by researchers involved in the Multi-Informatics for Nuclear Operations Scenarios (MINOS) venture. The effort by MINOS researchers is to gain a deeper knowledge base of nuclear facility operations which may be used to improve nuclear facility monitoring capabilities. This compendium comprises signatures developed from sound signals that were measured at ORNL's High Flux Isotope Reactor and the Radiochemical Engineering Development Center during the week of June 18, 2018. Most facility operations were performed specifically for this campaign, although some measurements were obtained in the course of normal operations. The knowledge gained from developing the signatures included herein will provide a better understanding that will be useful for upcoming measurement campaigns; as additional data becomes available it will be included in newer versions of this compendium.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Compendium of HFIR and REDC Infrasound and Low-Frequency Acoustic Emissions

This document is a compilation of infrasound and low-frequency acoustic signatures that characterize select nuclear reactor operations and hot-cell operations observed at Oak Ridge National Laboratory (ORNL) in fiscal year 2018. Also included here are the results of digital signal analyses describing these signatures. This effort provides insight about the feasibility of using acoustic signatures for local and remote-sensing and identification of nuclear fuel-cycle operations. The signatures included here, in this first year of on-site observations at ORNL, will become part of the broader basis set of signatures collected by researchers involved in the Multi-Informatics for Nuclear Operations Scenarios (MINOS) venture. The effort by MINOS researchers is to gain a deeper knowledge base of nuclear facility operations which may be used to improve nuclear facility monitoring capabilities. This compendium comprises signatures developed from sound signals that were measured at ORNL's High Flux Isotope Reactor and the Radiochemical Engineering Development Center during the week of June 18, 2018. Most facility operations were performed specifically for this campaign, although some measurements were obtained in the course of normal operations. The knowledge gained from developing the signatures included herein will provide a better understanding that will be useful for upcoming measurement campaigns; as additional data becomes available it will be included in newer versions of this compendium.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mechanical Testing of Hydrided Fuel Cladding

The U.S. Department of Energy Office of Nuclear Energy, Office of Fuel Cycle Technology established the Used Fuel Disposition Campaign (UFDC) to conduct research and development activities related to storage, transportation, and disposal of used nuclear fuel (UNF) and high-level radioactive waste. Within the UFDC, the storage and transportation task has been created to address issues of extended storage and transportation. One gap in knowledge identified as high priority by UFDC includes hydrogen effects in zirconium alloy cladding and reorientation of cladding hydrides. During reactor operations, hydrogen is generated from the oxidation of the surface of zirconium alloy materials in the coolant of light water reactors can be absorbed into the cladding and form zirconium hydrides. At high temperatures and hoop stresses, these normally circumferential oriented hydrides in high burnup UNF (HB-UNF) may reorient in the radial direction and affect the mechanical properties of the cladding. Understanding these changes in mechanical properties will aid in analyzing how UNF will perform during storage and transportation. Separate effects testing to measure the mechanical properties of un-hydrided, pre-hydrided, and irradiated HB-UNF is currently underway at Pacific Northwest National Laboratory (PNNL). In order to measure these mechanical properties, staff at PNNL are employing tensile, compression, and burst testing. Systems have been developed to pre-hydride cladding and reorient cladding hydrides. The development of these systems and the testing methods are described herein.

Cladding, Zirconium, Hydrides, Mechanical Testing↗

Mining Integral Actinides Cross Sections from Reactor Data

A novel approach is being explored that involves extraction of integral cross-sections for actinides, based on measured concentrations. The effort is primarily focused on Hanford and Savannah River information. In the early days of reactor operation, reliance on product quality was measured with state-of-the-art chemical and radiological methods. Examples from Hanford reactor data showing a method to extract integral cross-sections and how relationships between actinides, as a function of exposure, can be used to validate present day burn-up and transmutation codes. The effort will yield cross-sections and other parameters of particular value to criticality safety engineers designing new facilities, equipment, and processes for the next generation fuel cycles and formulation of new American National Standard Institute/American Nuclear Society Standards.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RADIOACTIVE WASTE STREAMS FROM VARIOUS POTENTIAL NUCLEAR FUEL CYCLE OPTIONS

Five fuel cycle options, about which little is known compared to more commonly known options, have been studied in the past year for the United States Department of Energy. These fuel cycle options, and their features relative to uranium-fueled light water reactor (LWR)-based fuel cycles, include: • Advanced once-through reactor concepts (Advanced Once-Through, or AOT) – intended for high uranium utilization and long reactor operating life, use depleted uranium in some cases, and avoid or minimize used fuel reprocessing • Fission-fusion hybrid (FFH) reactor concepts – potential variations are intended for high uranium or thorium utilization, produce fissile material for use in power generating reactors, or transmute transuranic (TRU) and some radioactive fission product (FP) isotopes • High temperature gas reactor (HTGR) concepts - intended for high uranium utilization, high reactor thermal efficiencies; they have unique fuel designs • Molten salt reactor (MSR) concepts – can breed fissile U-233 from Th fuel and avoid or minimize U fuel enrichment, use on-line reprocessing of the used fuel, produce lesser amounts of long-lived, highly radiotoxic TRU elements, and avoid fuel assembly fabrication • Thorium/U-233 fueled LWR (Th/U-233) concepts – can breed fissile U-233 from Th fuel and avoid or minimize U fuel enrichment, and produce lesser amounts of long-lived, highly radiotoxic TRU elements. These fuel cycle options could result in widely different types and amounts of used or spent fuels, spent reactor core materials, and waste streams from used fuel reprocessing, such as: • Highly radioactive, high-burnup used metal, oxide, or inert matrix U and/or Th fuels, clad in Zr, steel, or composite non-metal cladding or coatings • Spent radioactive-contaminated graphite, SiC, carbon-carbon-composite, metal, and Be reactor core materials • Li-Be-F salts containing U, TRU, Th, and fission products • Ranges of separated or un-separated activation products, fission products, and actinides. Waste forms now used or studied for used LWR fuels can be used for some of these waste streams – but some waste forms may need to be developed for unique waste streams.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Assessment of Near-Term Fuel Screening and Qualification Needs for Nuclear Thermal Propulsion Systems

Nuclear thermal propulsion (NTP) is an in-space propulsion technology capable of both high specific impulse (850–1000 s) and thrust (44–1112 kN), which can help reduce trip times for crewed missions beyond low Earth orbit. NTP technology has been demonstrated during historic programs. Over 20 ground test reactor experiments were performed, which demonstrated the prototypic reactor operations, during the Nuclear Engine for Rocket Vehicle Application (NERVA)/Rover program (1955–1972). Although historical programs have shown that NTP is a viable in-space propulsion technology, developing NTP in modern programs is contingent on the development and qualification of ultrahigh-temperature nuclear fuel technologies that can withstand engine operating conditions. In historical NTP development programs such as NERVA/Rover, prototypic reactor/engine schemes were ground tested to assess the overall system feasibility and to qualify the reactor fuel forms for eventual flight systems. Although this approach is effective to verify fuel performance under prototypic conditions, relying solely on full-scale NTP reactor tests as the pathway for verifying or qualifying fuel is inefficient and cost prohibitive today. Additionally, modern nuclear licensing requirements state that before test reactor approval, reactor components and fuel elements should be qualified via non-nuclear (out-of-pile) and nuclear (in-pile) testing under representative operating conditions. Using this methodology, fuel matures as production scale fabrication methods are established, and as produced fuel performance is demonstrated. Here, this paper provides an overview of historical approaches to NTP fuel performance maturation, including fuel screening and qualification needs, and provides insight for establishing an efficient testing paradigm that can be implemented to rapidly and affordably develop NTP fuel forms for eventual qualification.

42 ENGINEERING↗

Critical Assemblies: Dragon Burst Assembly and Solution Assemblies

This work reviews the historical literature associated with the Dragon experiment and water boiler reactors operated at Los Alamos during the Manhattan Project. Frisch’s invited talk given at the American Nuclear Society’s Fast Burst Reactor Conference held at the University of New Mexico in Albuquerque, New Mexico, in 1969 is quoted. From the literature review, basic models for the Dragon experiment and for a water boiler–type assembly (aqueous homogeneous reactor) were created that can be used for conducting multiphysics simulations for criticality excursion studies. This methodology utilizes the coupled neutronic-hydrodynamic method to perform a time-dependent dynamic simulation of a criticality excursion. MCNP® was utilized to calculate important nuclear kinetic parameters that were incorporated into the models. Simulation results compare reasonably well with historic data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Used Fuel Disposition Campaign: Embrittlement and DBTT of High-Burnup PWR Fuel Cladding Alloys

Structural analyses of high-burnup (HBU) fuel require cladding mechanical properties and failure limits to assess fuel behavior during long-term dry-cask storage and transportation. Pre-storage drying-transfer operations and early stage storage subject cladding to higher temperatures and pressure-induced tensile hoop stresses relative to in-reactor operation and pool storage. Under these conditions, radial hydrides may precipitate during slow cooling and provide an additional embrittlement mechanism as the cladding temperature decreases below the ductile-to-brittle transition temperature (DBTT). On the basis of previous test results, susceptibility to radial-hydride precipitation depends on cladding material and microstructure, hydrogen content (CH), and pre-drying hydride distribution, as well as peak hoop stresses and temperatures during drying operations and storage. Susceptibility to embrittlement depends on the extent of radial-hydride precipitation, the number density of circumferential hydrides, and the thickness of the outer-surface hydride rim. The goal of the testing program is to determine drying-storage conditions for which the cladding remains ductile at ambient temperature, in other words, with the DBTT ≤20°C.

Billone, M. C.↗

National Reactor Innovation Center (NRIC) Infrastructure Integration Plan

The NRIC Infrastructure Integration Plan serves as a roadmap for integrating future test reactors at the Idaho National Laboratory’s (INL’s) desert Site into core infrastructure and services required for reactor operations. This document is not intended to serve as a requirements document, nor does it list all infrastructure requirements for each reactor planned for testing at the Site. It represents an overview of the most likely infrastructure and services that will be required by some or all the test reactors, as well as what infrastructure and services exist at the Site that have the potential to support and enable NRIC test reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Preparation of Simulated LBL Defects for Round Robin Experiment

A critical characteristic of the TRISO fuel design is its ability to retain fission products. During reactor operation, the TRISO layers act as barriers to release of fission products not stabilized in the kernel. Each component of the TRISO particle and compact construction plays a unique role in retaining select fission products, and layer performance is often interrelated. The IPyC, SiC, and OPyC layers are barriers to the release of fission product gases such as Kr and Xe. The SiC layer provides the primary barrier to release of metallic fission products not retained in the kernel, as transport across the SiC layer is rate limiting due to the greater permeability of the IPyC and OPyC layers to many metallic fission products. These attributes allow intact TRISO coatings to successfully retain most fission products released from the kernel, with the majority of released fission products during operation being due to defective, damaged, or failed coatings. This dominant release of fission products from compromised particles contributes to the overall source term in reactor; causing safety and maintenance concerns and limiting the lifetime of the fuel. Under these considerations, an understanding of the nature and frequency of compromised particles is an important part of predicting the expected fission product release and ensuring safe and efficient operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Driving towards cost-competitive biofuels through catalytic fast pyrolysis by rethinking catalyst selection and reactor configuration

Catalytic fast pyrolysis (CFP) has emerged as an attractive process for the conversion of lignocellulosic biomass into renewable fuels and products. Considerable research and development has focused on using circulating-bed reactors with zeolite catalysts (e.g., HZSM-5) for CFP because of their propensity to form gasoline-range aromatic hydrocarbons. However, the high selectivity for aromatics comes at the expense of low carbon yield, a key economic driver for this process. In this contribution, we evaluate non-zeolite catalysts in a fixed-bed reactor configuration for an integrated CFP process to produce fuel blendstocks from lignocellulosic biomass. These experimental efforts are coupled with technoeconomic analysis (TEA) to benchmark the process and guide research and development activities to minimize costs. The results indicate that CFP bio-oil can be produced from pine with improved yield by using a bifunctional metal-acid 2 wt% Pt/TiO 2 catalyst in a fixed-bed reactor operated with co-fed H 2 at near atmospheric pressure, as compared to H-ZSM5 in a circulating-bed reactor. The Pt/TiO 2 catalyst exhibited good stability over 13 reaction-regeneration cycles with no evidence of irreversible deactivation. The CFP bio-oil was continuously hydrotreated for 140 h time-on-stream using a single-stage system with 84 wt% of the hydrotreated product having a boiling point in the gasoline and distillate range. This integrated biomass-to-blendstock process was determined to exhibit an energy efficiency of 50% and a carbon efficiency of 38%, based on the experimental results and process modelling. TEA of the integrated process revealed a modelled minimum fuel selling price (MFSP) of $4.34 per gasoline gallon equivalent (GGE), which represents a cost reduction of $0.85 GGE -1 compared to values reported for CFP with a zeolite catalyst. TEA also indicated that catalyst cost was a significant factor influencing the MFSP, which informed additional CFP experiments in which lower-cost Mo2C and high-dispersion 0.5 wt% Pt/TiO 2 catalysts were synthesized and evaluated. These materials demonstrated CFP carbon yield and oil oxygen content similar to those of the 2 wt% Pt/TiO 2 catalyst, offering proof-of-concept that the lower-cost catalysts can be effective for CFP and providing a route to reduce the modelled MFSP to $3.86–3.91 GGE -1 . This report links foundational science and applied engineering to demonstrate the potential of fixed-bed CFP and highlights the impact of coupled TEA to guide research activities towards cost reductions.

09 BIOMASS FUELS↗

Integrated Nondestructive Assay Systems to Estimate Plutonium in Spent Fuel Assemblies

An integrated nondestructive assay (NDA) system combining active (neutron generator) and passive neutron detection and passive gamma (PG) detection is being analyzed in order to estimate the amount of plutonium, verify initial enrichment, burnup, and cooling time, and detect partial defects in a spent fuel assembly (SFA). Active signals are measured using the differential die-away (DDA), delayed neutron (DN), and delayed gamma (DG) techniques. Passive signals are measured using total neutron (TN) counts and both gross and spectral resolved gamma counts. To quantify how a system of several NDA techniques is expected to perform, all of the relevant NDA techniques listed above were simulated as a function of various reactor conditions such as initial enrichment, burnup, cooling time, assembly shuffling pattern, reactor operating conditions (including temperature, pressure, and the presence of burnable poisons) by simulating the NDA response for five sets of light water reactor assemblies. In this study, we compare the performance of several exploratory model-fitting options (including neural networks, adaptive regression with splines, iterative bias reduction smoothing, projection pursuit regression, and regression with quadratic terms and interaction terms) to relate data simulated with measurement and model error effects from various subsets of the NDA techniques to the total Pu mass. Isotope masses for SFAs and expected detector responses (DRs) for several NDA techniques are simulated using MCNP, and the DRs become inputs to the fitting process. Such responses include eight signals from DDA, one from DN, one from TN, and up to seven from PG; the DG signal will be examined separately. Results are summarized using the root-mean-squared estimation error for plutonium mass in held-out subsets of the data for a range of model and measurement error variances. Different simulation assumptions lead to different spent fuel libraries relating DRs to Pu mass. Some results for training with one library and testing with another library are also given.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Optimum Reactor Outlet Temperatures for High Temperature Gas-Cooled Reactors Integrated with Industrial Processes

This report summarizes the results of a temperature sensitivity study conducted to identify the optimum reactor operating temperatures for producing the heat and hydrogen required for industrial processes associated with the proposed new high temperature gas-cooled reactor. This study assumed that primary steam outputs of the reactor were delivered at 17 MPa and 540°C and the helium coolant was delivered at 7 MPa at 625–925°C. The secondary outputs of were electricity and hydrogen. For the power generation analysis, it was assumed that the power cycle efficiency was 66% of the maximum theoretical efficiency of the Carnot thermodynamic cycle. Hydrogen was generated via the hightemperature steam electrolysis or the steam methane reforming process. The study indicates that optimum or a range of reactor outlet temperatures could be identified to further refine the process evaluations that were developed for high temperature gas-cooled reactor-integrated production of synthetic transportation fuels, ammonia, and ammonia derivatives, oil from unconventional sources, and substitute natural gas from coal.

42 ENGINEERING↗

Transient Reactor Test Facility (TREAT) Low Enriched Uranium (LEU) Conversion Progress

The National Nuclear Security Administration Office of Material Management and Minimization (NNSA M3) is working towards converting the Transient Reactor Test Facility (TREAT) located at the Idaho National Laboratory (INL) from its original high-enriched uranium (HEU) core to a low-enriched uranium (LEU) core. TREAT reactor operations were restarted in November of 2017 and data obtained from the initial testing will be used to validate the existing ANL reactor modeling. Fuel block development has progressed with the completion of 2 and 4 inch crack free surrogate fuel blocks. Alternative fabrication methods for the fuel blocks continue to be explored and are showing promising results. Additionally, cladding oxidation studies have been performed and analyzed to initiate the down selection of cladding material to be used for the TREAT LEU fuel elements. This paper describes the current status of the above mentioned activities, and discusses the anticipated path forward for the conversion program as it progresses toward a final fuel design and fuel fabrication process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Waste Management Processing Projects in the PRC - 16551

EnergySolutions continues to provide waste treatment solutions in the Peoples Republic of China (PRC). In 2015 ES had completed installation of systems at two different Nuclear power sites (Haiyang, an AP-1000{sup TM} site and Yangjiang, a CPR1000 site). This paper discusses progress on these two projects, and provides new information regarding the operation of the systems. The Yangjiang project became operational in the fall of 2015 while the Haiyang project will be done is nearly done with commissioning and is waiting for reactor operations. Haiyang Project: In the Shandong Province on China's northeast coast, EnergySolutions, as part of a consortium with China Power Investment (CPI) and Yuanda Environmental Protection Engineering Company (a PRC state-owned company), has designed and constructed the site's Site Rad Waste Treatment Facility (SRTF). The SRTF provides solid waste processing services for up to 8 AP-1000s{sup TM}. The SRTF performs the following functions: 1. Five year storage for HICs containing spent resin and filters from the nuclear power plants' waste liquid systems (WLS); 2. Sorting and Compaction System for solid waste generated from Nuclear Power Plant (NPP) operations. This system implements: a) Real time radiography to screen 200 liter waste drums for prohibited items, b) Pre-compaction, c) High Resolution Gamma Spectrophotometry (HRGS) for waste characterization, d) Supercompaction, e) Solidification of compacted drums inside overpack drums which are filled with 60 MPa compressive strength grout, and f) Automatic drum lidding which crimps the drum lid to the drum body. 3. Laundry services for NPP anti-contamination clothing. 4. At the nuclear islands, EnergySolutions is providing mobile liquid waste processing systems that utilize EnergySolutions Advanced Liquid Processing System ALPS{sup TM}/Advanced Injection Method System AIM{sup TM} processing systems to supplement the NPP's WLS system when radionuclide concentrations exceed release criteria. The spent resins and filters from the nuclear power plants are placed in EnergySolutions supplied HICs, dewatered using EnergySolutions Self Engaging Dewatering System (SEDS{sup TM}), and then placed in EnergySolutions 8-120B Type B cask for the transport of the HIC between the NPP and the SRTF and, ultimately, to a disposal site once it is ready for operations Yangjiang Project: EnergySolutions is providing liquid waste treatment system (TEU) and solid waste treatment system (TES) for Yangjiang units 3 and 4 for the China Nuclear Power Engineering Company (CNPEC). The Yangjiang site is located approximately 300 kilometers west of Hong Kong. The TEU system processes floor drain, chemical drain, and process drain tanks liquids to achieve a release concentration less than 37 Bq/l. The TES system receives spent resin and filters into HIC containers which are dewatered and subsequently transported to the Yangjiang sites QT building where they are stored for a period of up to 5 years or until a disposal site are available. TEU (Liquid waste treatment) consists of the following unit operations: - ALPS{sup TM}/AIM{sup TM} system, which includes two separate 8 vessel water treatment systems that consist of granular activated carbon (GAC), cation, anion ion and mixed bed media ion exchange (IX) columns; and: - A reverse osmosis system for final polishing, - TES (solid waste system), - SEDS (Self Engaging Dewatering System), - Shielding for the loading and storage of HICs, - Shielded transport container for the transfer of HIC to the QT building for storage, - Shielded transfer bell for the transport of spent filters from the NPP operating area to HIC. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Transient kinetic insights into selective propene oxidation over industrial bismuth molybdate catalysts

Selective oxidation of propene to acrolein over industrial multicomponent bismuth molybdate (BMO) catalysts significantly depends on reaction conditions that include operating parameters and catalyst state. Here, this work investigates selective propene oxidation in the intrinsic kinetic paradigm of Temporal Analysis of Products (TAP) reactor by systematically varying catalyst redox state, temperature, and oxygen-to-propene feed ratio. A 93 % propene conversion with an acrolein yield of 80 % is achieved at elevated temperatures (450 °C) on oxidized catalysts under oxygen-rich conditions (O 2 :C 3 H 6 = 10). However, these conditions diminish acrolein-to-CO 2 selectivity due to enhanced total oxidation to CO 2 . In contrast, a reduced catalyst state, moderate temperature (350 °C), and lower oxygen feed (O 2 :C 3 H 6 = 1) nearly doubles the acrolein to-CO 2 selectivity, albeit at a lower acrolein yield (33 %). Transient kinetic studies together with a kinetic model that simplify the major product formation pathways in lumped non-elementary forms reveal that the availability of surface oxygen species plays a pivotal role in governing reaction pathways. Additionally, density functional theory (DFT) calculations on pure BMO catalysts inform the role of surface redox states on propene and oxygen activation barriers. Lattice oxygen at acrolein-selective sites drives both acrolein and CO 2 formation, while adsorbed oxygen at activation sites favors unselective CO 2 generation. This work establishes a critical relationship between transient product selectivity and surface oxygen availability, which is strongly influenced by catalyst redox state, feed ratio, and reaction temperature. These insights underscore the importance of dynamic reactor operation strategies and offer a foundation for designing next-generation propene oxidation processes with tunable acrolein selectivity.

42 - ENGINEERING↗