Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROLLING ELEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Finite Element Analysis on Spread for In-plane Roll-bending Process

The in-plane roll-bending process is a special wedge rolling with a configuration of two conical rolls which can form strips into open ring products. The spread of a ring is usually not considered in previous radius predicting models by Yang et al. and Xian et al. However, the spread increases to 10% for a ring with average reduction of 56%, and there is a discrepancy between the predicted radius and the experiment. Spread analysis/calculation has become an urgent problem in radius prediction and precision control of unequal deformation in this process. A finite element (FE) model considering spread effect is established and evaluated by experiments. A comparison between the predicted results with/without considering spread by FE analysis and experiments is carried out. The result shows that the predicted results considering spread are much closer to the experiments than those without considering spread effect. Based on the FE simulation, the spread characteristics of the ring with two types of cross section (including partly and entirely compressed cross section) are investigated. It is found that, there exist three spread regions, including outer positive region, middle negative region and inner positive region for the partly compressed ring; and there are outer positive region and inner negative region for the entirely compressed ring. The spread mostly happens at the outer positive region for both types of ring. The effects of process parameters, such as wedge angle, bite location, friction coefficient and rotational speed of roll, on spread for three aluminum alloys, 3A21O, 5A02O and 2A12T4, are investigated. The results indicate that the spread decreases with an increase in wedge angle, whereas increases with the growth of bite location; the spread remains stable with increasing friction coefficient and fluctuates within 3%-8% with a rise in rotational speed of roll. The spread of the partly compressed ring is less than 6%; large spread (larger than 6%) occurs when the ring is entirely compressed; the spread may reach a maximum value of 18.8% for material 5A02O.

36 MATERIALS SCIENCE↗

Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures

Cold rolling can be used in-process or post-process to improve microstructure, mechanical properties and residual stress in directed-energy-deposition techniques, such as the high deposition rate wire + arc additive manufacturing (WAAM) process. Finite element simulations of the rolling process are employed to investigate the effect of rolling parameters, in particular rolling load and roller profile radius on the residual stress field as well as plastic strain distribution for the profiled roller. The results show the response to rolling of commonly used structural metals in WAAM, i.e., AA2319, S335JR steel and Ti-6Al-4V, taking into account the presence of residual stresses. The rolling load leads to changes in the location and the maximum value of the compressive residual stresses, as well as the depth of the compressive residual stresses. However, the roller profile radius only changes the maximum value of these compressive residual stresses. Changing the rolling load influences the equivalent plastic strain close to the top surface of the wall as well as in deeper areas, whereas the influence of the roller profile radius is negligible. The plastic strain distribution is virtually unaffected by the initial residual stresses prior to rolling. Finally, design curves were generated from the simulations for different materials, suggesting ideal rolling load and roller profile combinations for microstructural improvement requiring certain plastic strains at a specific depth of the additive structure.

36 MATERIALS SCIENCE↗

Influence of rolling reduction and annealing on recrystallization and grain structure in Ta-2.5W alloys

The microstructural evolution of wrought Tantalum - 2.5 wt% Tungsten (Ta-2.5W) alloys during thermomechanical processing is critical for optimizing their mechanical reliability in demanding applications such as aerospace, chemical processing, and nuclear technology. Despite the widespread use of Ta-W alloys, a comprehensive understanding of how rolling reduction, annealing temperature, and elemental inhomogeneity interact to determine recrystallization behavior and grain refinement remains incomplete. Here, in this study, we systematically investigate the effects of cold rolling and subsequent annealing on the microstructure of Ta-2.5W, with particular attention to grain orientation, stored energy, and elemental banding. Our results demonstrate that higher rolling reduction rates lower the onset and completion temperatures for recrystallization, resulting in finer and more homogeneous grain structures. Electron backscatter diffraction (EBSD) analysis reveals that grains with a 〈111〉 parallel to the plate normal possess higher stored energy and nucleate recrystallization more readily than grains with a 〈001〉 parallel to the plate normal. Elemental mapping shows that tungsten inhomogeneity leads to localized bands of accelerated recrystallization and hardness variation. These findings provide new insights into the mechanisms of microstructure refinement in Ta-2.5W alloys, offering guidance for tailoring processing routes to achieve superior performance in demanding engineering environments.

Annealing↗

The Effect of Rolling As-Cast and Homogenized U-10Mo Samples on the Microstructure Development and Recovery Curves

Over the past several years Pacific Northwest National Laboratory (PNNL) has been actively involved in supporting the U.S. Department of Energy National Nuclear Security Administration Office of Material Management and Minimization (formerly Global Threat Reduction Initiative). The U.S. High- Power Research Reactor (USHPRR) project is developing alternatives to existing highly enriched uranium alloy fuel to reduce the proliferation threat. One option for a high-density metal fuel is uranium alloyed with 10 wt% molybdenum (U-10Mo). Forming the U-10Mo fuel plates/foils via rolling is an effective technique and is actively being pursued as part of the baseline manufacturing process. The processing of these fuel plates requires systematic investigation/understanding of the pre- and post-rolling microstructure, end-state mechanical properties, residual stresses, and defects, their effect on the mill during processing, and eventually, their in-reactor performance. In the work documented herein, studies were conducted to determine the effect of cold and hot rolling the as-cast and homogenized U-10Mo on its microstructure and hardness. The samples were homogenized at 900°C for 48 h, then later annealed for several durations and temperatures to investigate the effect on the material’s microstructure and hardness. The rolling of the as-cast plate, both hot and cold, was observed to form a molybdenum-rich and -lean banded structure. The cold rolling was ineffective, and in some cases exacerbated the as-cast defects. The grains elongated along the rolling direction and formed a pancake shape, while the carbides fractured perpendicularly to the rolling direction and left porosity between fractured particles of UC. The subsequent annealing of these samples at sub-eutectoid temperatures led to rapid precipitation of the ' lamellar phase, mainly in the molybdenum-lean regions. Annealing the samples above the eutectoid temperature did not refine the grain size or the banded microstructure. However, annealing the samples led to quick recovery in hardness as evidenced by a drop in Vickers hardness of 20%. Hot rolling was performed at 650 and 800°C. The hot-rolling mill loads (load separation force) were approximately 40 to 50% less than the cold-rolling for the same reduction and thickness. It was observed that hot rolling the samples with 50% or more reduction in thickness were responsible for dynamic recrystallization in the hot-rolled samples and led to grain refinement. Unlike the cold-rolled samples, the hot-rolled samples did not fracture the carbides and appeared to heal the casting defects. The recovery phenomenon was similar to the cold-rolled samples above the eutectoid temperatures, but owing to the refined grain size, the precipitation of the lamellar phase was far more rapid in these samples and the hardness increased more rapidly than in the cold rolled sample when heated below the eutectoid temperature. The data generated from these rolling efforts has been used to make the process modeling efforts more robust and applicable to all USHPRR partner rolling mills. The flow stress for cold rolling the samples was determined to be between 170-190 ksi, with frictional forces between 0.2 and 0.4 for the PNNL mill. The measured roll separation forces and those simulated using finite element methods for hot and cold rolling for the PNNL rolling mill were in good agreement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Effect of Rolling As-Cast and Homogenized U-10Mo Samples on the Microstructure Development and Recovery Curves

Over the past several years Pacific Northwest National Laboratory (PNNL) has been actively involved in supporting the U.S. Department of Energy National Nuclear Security Administration Office of Material Management and Minimization (formerly Global Threat Reduction Initiative). The U.S. High-Power Research Reactor (USHPRR) project is developing alternatives to existing highly enriched uranium alloy fuel to reduce the proliferation threat. One option for a high-density metal fuel is uranium alloyed with 10 wt% molybdenum (U-10Mo). Forming the U-10Mo fuel plates/foils via rolling is an effective technique and is actively being pursued as part of the baseline manufacturing process. The processing of these fuel plates requires systematic investigation/understanding of the pre- and post-rolling microstructure, end-state mechanical properties, residual stresses, and defects, their effect on the mill during processing, and eventually, their in-reactor performance. In the work documented herein, studies were conducted to determine the effect of cold and hot rolling the as-cast and homogenized U-10Mo on its microstructure and hardness. The samples were homogenized at 900°C for 48 h, then later annealed for several durations and temperatures to investigate the effect on the material’s microstructure and hardness. The rolling of the as-cast plate, both hot and cold, was observed to form a molybdenum-rich and -lean banded structure. The cold rolling was ineffective, and in some cases exacerbated the as-cast defects. The grains elongated along the rolling direction and formed a pancake shape, while the carbides fractured perpendicularly to the rolling direction and left porosity between fractured particles of UC. The subsequent annealing of these samples at sub-eutectoid temperatures led to rapid precipitation of the α + γ ' lamellar phase, mainly in the molybdenum-lean regions. Annealing the samples above the eutectoid temperature did not refine the grain size or the banded microstructure. However, annealing the samples led to quick recovery in hardness as evidenced by a drop in Vickers hardness of 20%. Hot rolling was performed at 650 and 800°C. The hot-rolling mill loads (load separation force) were approximately 40 to 50% less than the cold-rolling for the same reduction and thickness. It was observed that hot rolling the samples with 50% or more reduction in thickness were responsible for dynamic recrystallization in the hot-rolled samples and led to grain refinement. Unlike the cold-rolled samples, the hot-rolled samples did not fracture the carbides and appeared to heal the casting defects. The recovery phenomenon was similar to the cold-rolled samples above the eutectoid temperatures, but owing to the refined grain size, the precipitation of the lamellar phase was far more rapid in these samples and the hardness increased more rapidly than in the cold rolled sample when heated below the eutectoid temperature. The data generated from these rolling efforts has been used to make the process modeling efforts more robust and applicable to all USHPRR partner rolling mills. The flow stress for cold rolling the samples was determined to be between 170-190 ksi, with frictional forces between 0.2 and 0.4 for the PNNL mill. The measured roll separation forces and those simulated using finite element methods for hot and cold rolling for the PNNL rolling mill were in good agreement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Elemental Abundance Variations Observed in Solar Energetic Particle Events During Solar Cycle 23

We report on observations of the abundances of elements from Helium to Nickel in over 50 different solar energetic particle events using the Solar Isotope Spectrometer (SIS) on-board the Advanced Composition Explorer (ACE) spacecraft. It had originally been expected that the energy spectra of different elements would show spectral roll-overs at energies related to the Q/M ratio of each element. Due to the partial stripping of Fe and essentially complete stripping of O, it was expected that the Fe/O ratio would be observed to decrease with increasing energy. While many events show this pattern, others have Fe/O which is constant with energy, while for yet others Fe/O actually increases with energy. Events having constant Fe/O could simply have their spectral breaks outside of the observed energy range. However, events which show increasing Fe/O cannot be explained within the framework of spectral breaks. Possible explanations include injection of remnant heavy ions from earlier impulsive events, hybrid Events consisting of a combination of flare-accelerated and shock-accelerated particles from a single solar event, and some new physical process in shock acceleration. We will report on efforts to distinguish these possible explanations.

vonRosenvinge, T. T.↗

Finite element modelling of process-integrated powder coating by radial axial rolling of rings

The process-integrated powder coating by radial axial rolling of rings represents a new hybrid production technique applied in the manufacturing of large ring-shaped work pieces with functional layers. It is thought to break some limitations that come along with the hot isostatic pressing (HIP) which is used nowadays to apply the powdery layer material onto the rolled substrate ring. Within the new process the compaction of the layer material is integrated into the ring rolling and HIP becomes dispensable. Following this approach the rolling of such compound rings brings up some new challenges. The volume of a solid ring stays nearly constant during the rolling. This behaviour can be exploited to determine the infeed of the rollers needed to reach the desired ring shape. Since volume consistency cannot be guaranteed for the rolling of a compound ring the choice of appropriate infeed of the rollers is still an open question. This paper deals with the finite element (FE) simulation of this new process. First, the material model that is used to describe the compaction of the layer material is shortly reviewed. The main focus of the paper is then put on a parameterized FE ring rolling model that incorporates a control system in order to stabilize the process. Also the differences in the behaviour during the rolling stage between a compound and a solid ring will be discussed by means of simulation results.

36 MATERIALS SCIENCE↗

Effect of cold working and isothermal aging on the precipitation of sigma phase in 2205 duplex stainless steel

A comprehensive understanding of the formation of the sigma phase resulting from the eutectoid reaction ({delta} {yields} {sigma} + {gamma}{sub 2}) is required. The kinetics necessary for the eutectoid reaction are closely related to the amount of plastic deformation in DSS. This work investigates the microstructural evolution of the {sigma} phase in a 22Cr-5Ni SAF 2205 DSS after subsequent plastic deformation and isothermal aging. The precipitation of the {sigma} phase resulted from the higher driving force for precipitating intermetallic compounds and the higher diffusion rate of their elements by cold-rolling, as well as the sufficient supply of molybdenum. The maximum amount of {sigma} phase precipitation remarkably increased with an increasing cold deformation, as compared with the non-cold-rolled materials. - Highlights: Black-Right-Pointing-Pointer The microstructural evolution of sigma phase has been characterized. Black-Right-Pointing-Pointer The chemical compositions of sigma phases were analyzed using TEM-EDX. Black-Right-Pointing-Pointer The effect of cold deformation on the precipitation of sigma phase was investigated.

36 MATERIALS SCIENCE↗

Evaluation of Uranium-235 Measurement Techniques

Monolithic U-Mo fuel plates are rolled to final fuel element form from the original cast ingot, and thus any inhomogeneities in 235 U distribution present in the cast ingot are maintained, and potentially exaggerated, in the final fuel foil. The tolerance for inhomogeneities in the 235 U concentration in the final fuel element foil is very low. A near-real-time, nondestructive technique to evaluate the 235 U distribution in the cast ingot is required in order to provide feedback to the casting process. Based on the technical analysis herein, gamma spectroscopy has been recommended to provide a near-real-time measure of the 235 U distribution in U-Mo cast plates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interdisciplinary Approach to the Lubrication of Concentrated Contacts

In an effort to further the advances in the complex and multidisciplinary subject of lubrication, the National Aeronautics and Space Administration (NASA) inaugurated in 1967 an interdisciplinary lubrication symposium series. The first meeting of the series, held in San Antonio, Texas, on November 28-30, 1967, was devoted to a critical appraisal of the level of understanding and the needed research in the area of sliding friction and wear under unlubricated and boundary-lubrication conditions. The second meeting, held in Cleveland, Ohio, on November 19-21, 1968, again emphasized unlubricated and boundary-lubricated sliding friction and wear but attempted to focus attention on some selected theoretical and practical problems by discussing in small working group their implications and possible methods of attack. Having thus provided for an examination of sliding friction and wear under unlubricated and boundary-lubrication conditions in considerable breadth and depth, the Steering Committee recommended to ASA in September 196 that further attention be turned to an evaluation of the collective understanding and the needed research in the lubrication of highly loaded machine elements in a combined rolling and sliding situation. The recommendation was accepted by ASA and, accordingly, a symposium entitled Interdisciplinary Approach to the Lubrication of Concentrated Contacts was held on the p-rounds of Rensselaer Polytechnic Institute, Troy, New York, on July 15-17, 1969.

P M Ku↗

A nonlinear finite-element analysis of wings in steady incompressible flows with wake roll-up

The problem of lifting surfaces and complex aircraft configurations in steady incompressible flow is considered. For lifting surfaces the problem is formulated in terms of an integral equation relating the potential discontinuity on wing and wake to the normal derivative of the potential on the lifting surface. For complex configurations the problem is formulated in terms of an integral equation relating the potential to its normal derivative on the surface of the aircraft. The integral equation is approximated by a system of linear algebraic equations obtained by dividing the surfaces into small quadrilateral elements and by assuming the potential (or the potential discontinuity) and its normal derivative to be constant within each element. The wake geometry is obtained by iteration by satisfying the condition that the velocity be tangent to the surface of the wake and that the potential discontinuity be constant along the streamlines.

Suciu, E. O.↗

Efficient rolling texture predictions and texture-sensitive properties of α-uranium foils

Here, finite element (FE) analysis was used to simulate the strain history of an α-uranium foil during cold-rolling, with the sheet modeled as an isotropic elastoplastic continuum. The resulting strain history was then used as input for a viscoplastic self-consistent (VPSC) polycrystal plasticity model to simulate crystallographic texture evolution. Mid-plane textures predicted via the combined FE→VPSC approach show alignment of the (010) poles along the rolling direction (RD), and the (001) poles along the normal direction (ND) with a symmetric splitting along RD. The surface texture is similar to that of the mid-plane, but with a shear-induced asymmetry that favors one of the RD split features of the (001) pole figure. Both the mid-plane and surface textures predicted by the FE→VPSC approach agree with published experimental results for cold-rolled α-uranium plates, as well as predictions made by a more computationally intensive full-field crystal plasticity based finite element model. α-uranium foils produced by cold-rolling must typically undergo a final recrystallization anneal to restore ductility prior to their final application, resulting in significant texture evolution from the cold-rolled plate deformation texture. Using the texture measured from a foil in the final recrystallized state, coefficients of the thermal expansion and elastic stiffness tensors were calculated using a thermo-elastic self-consistent model, and the anisotropic yield loci and flow curves along the RD, TD, and ND were predicted using the VPSC code.

36 MATERIALS SCIENCE↗

Theoretical study of lift generated vortex sheets designed to avoid roll up

The random motions of the vortex elements behind a wing that sheds a disturbed, translating array of vortices are analyzed. The analysis indicates that the wake would diffuse and decay rapidly when viscosity is present and would produce small rolling moments on encountering aircraft. It was found that comparable results could also be achieved with an array consisting of vortices that are equal in magnitude but which alternate in sign. This observation indicates that random motion can probably be achieved with a variety of stepped loadings.

Rossow, V. J.↗

Computational Modeling of Multi-Pass Rolling Parameters Effect on Resulting Fuel Foil Shape

A focus of the U.S. Department of Energy is to improve production yield and reduce the cost of Low Enriched Uranium (LEU)-molybdenum alloy (U-10Mo) monolithic fuel plates that will be replacing High Enriched Uranium (HEU) oxide dispersion fuels used currently in the United States High Performance Research Reactors (USHPRR). One area of improvement is lowering the high transverse waviness and longitudinal waviness currently present within rolled foils prior to cladding to produce fuel plates. Traditional rolling manufacturing techniques for other metal foils use winders to pull and straighten the foil as it is rolled back and forth to the final thickness. This approach cannot be used to roll thin U-10Mo foils (0.008-0.025” thick) because only small castings can be rolled due to nuclear criticality safety concerns. As a result, the fuel foils are too short (1 m in length) to use traditional winders. Therefore, it is crucial to identify other rolling parameters (i.e., roller friction, axial tension load, roller diameter, and roll pass reduction percent) that might reduce transverse waviness and longitudinal waviness in the rolled fuel foil and develop a high-yield, low-cost multi-pass rolling manufacturing process. This report documents a systematic finite element modeling study to investigate the effects of numerous rolling parameters to reduce resulting transverse waviness and longitudinal waviness in the fuel foil during multi-pass rolling of U-10Mo foils. The rolling of a U-10Mo plate with initial dimensions of 1”x1”x 0.048” is modeled using Abaqus CAE. This rolling is modeled to undergo eight 20% reduction roll passes to a final fuel foil thickness of 0.01”. The elastic-plastic constitutive model of the U-10Mo alloy was input to the fuel foil rolling model. The rollers were modeled as rigid bodies. A comparison of rolling friction coefficients of 0.3 and 0.7 over a wide range of applied axial tension loads were investigated in order to evaluate the effect of using a lubricant during rolling. The effect of roller diameter on the resulting transverse waviness and longitudinal waviness of the fuel foil over a wide range of axial tension loads were also investigated by modeling rollers 7/8” and 3.75” in diameter. The results of this systematic finite element method study will aid manufacturers in producing low transverse waviness and reduced longitudinal waviness in U-10Mo fuel foils.

U-10Mo, FEA, Rolling, Residual Stress, Fuel Foil↗

Rolling-Convolute Joint For Pressurized Glove

Rolling-convolute metacarpal/finger joint enhances mobility and flexibility of pressurized glove. Intended for use in space suit to increase dexterity and decrease wearer's fatigue. Also useful in diving suits and other pressurized protective garments. Two ring elements plus bladder constitute rolling-convolute joint balancing torques caused by internal pressurization of glove. Provides comfortable grasp of various pieces of equipment.

Kosmo, Joseph J.↗

Energy dissipation in a rolling aircraft tire

The project is extending an existing finite element tire model to calculate the energy dissipation in a free-rolling aircraft tire and temperature buildup in the tire carcass. The model will provide a means of calculating the influence of tire design on the distribution of tire temperature. Current focus is on energy loss measurements of aircraft tire material. The feasibility of taking test specimens directly from the tire carcass for measurements of viscoelastic properties was demonstrated. The interaction of temperature and frequency effects on material loss properties was studied. The tire model was extended to calculate the cyclic energy change in a tire during rolling under load. Input data representing the 40 by 14 aircraft tire whose material loss properties were measured are being used.

Tielking, John T.↗

Control system and method for tapered structure construction

A control system for forming a tapered structure includes a sensor providing feedback for a machine for forming a tapered structure including at least three rolls having at least one bend roll and at least two guide rolls. The guide rolls may include rollette banks having a plurality of rollettes. The machine may also include an adjustment mechanism to position at least one of the rolls, where a diameter of the tapered structure being formed is controlled by relative positions of the rolls. The machine may also include a joining element to join edges of a stock of material together as it is rolled through the rolls to form the tapered structure. The control system may also include a controller to receive feedback from the sensor and to send a control signal based on the feedback to the adjustment mechanism for positioning at least one of the rolls.

Takata, Rosalind K.↗