X-BAND TELEMETRY SYSTEMS FOR REENTRY RESEARCH
X-band telemetering for radio interference - reentry communication in earth orbit reentry vehicle
TELEMETRY↗
SEARCH · Search NASA
Results for “Radio Communication”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project, UAS Control and Non-Payload Communication System Phase-1 Flight Test Results
NASA's UAS Integration in the NAS project, has partnered with Rockwell Collins to develop a concept Control and Non-Payload Communication (CNPC) system prototype radio, operating on recently allocated UAS frequency spectrum bands. This prototype radio is being used to validate initial proposed performance requirements for UAS control communications. This presentation will give an overview of the current status of the prototype radio development, and results from phase 1 flight tests conducted during 2013.
communication↗
Power and Efficiency Optimized in Traveling-Wave Tubes Over a Broad Frequency Bandwidth
A traveling-wave tube (TWT) is an electron beam device that is used to amplify electromagnetic communication waves at radio and microwave frequencies. TWT's are critical components in deep space probes, communication satellites, and high-power radar systems. Power conversion efficiency is of paramount importance for TWT's employed in deep space probes and communication satellites. A previous effort was very successful in increasing efficiency and power at a single frequency (ref. 1). Such an algorithm is sufficient for narrow bandwidth designs, but for optimal designs in applications that require high radiofrequency power over a wide bandwidth, such as high-density communications or high-resolution radar, the variation of the circuit response with respect to frequency must be considered. This work at the NASA Glenn Research Center is the first to develop techniques for optimizing TWT efficiency and output power over a broad frequency bandwidth (ref. 2). The techniques are based on simulated annealing, which has the advantage over conventional optimization techniques in that it enables the best possible solution to be obtained (ref. 3). Two new broadband simulated annealing algorithms were developed that optimize (1) minimum saturated power efficiency over a frequency bandwidth and (2) simultaneous bandwidth and minimum power efficiency over the frequency band with constant input power. The algorithms were incorporated into the NASA coupled-cavity TWT computer model (ref. 4) and used to design optimal phase velocity tapers using the 59- to 64-GHz Hughes 961HA coupled-cavity TWT as a baseline model. In comparison to the baseline design, the computational results of the first broad-band design algorithm show an improvement of 73.9 percent in minimum saturated efficiency (see the top graph). The second broadband design algorithm (see the bottom graph) improves minimum radiofrequency efficiency with constant input power drive by a factor of 2.7 at the high band edge (64 GHz) and increases simultaneous bandwidth by 500 MHz.
Wilson, Jeffrey D.↗
Broadcast radio and television satellite requirements
Parameters affecting communication satellite missions, and broadcast radio and television satellite requirements
Digesu, F. E.↗
ARQ schemes for data transmission in mobile radio systems
The problem of providing data communications over a land mobile radio channel is considered, taking into account error detection combined with retransmission on request as a means of obtaining reliability in digital data transmission. The considered systems are referred to as automatic RQ (repeat-request) or ARQ. It is pointed out that the distinguishing features of a land mobile radio (LMR) system, as far as the ARQ protocol is concerned, are a frequency or pair of frequencies shared by a large population of half-duplex users which cannot transmit and receive simultaneously. A description is presented of those variations of ARQ which are adaptable to an LMR system. A new channel model for a fading LMR channel is developed, and several ARQ protocols and some new protocol combinations are described. The relationships are developed for a description of the various protocols in terms of channel failure probabilities. Undetected error probabilities are developed and compared.
Comroe, R. A.↗
Deep-Space Optical Communications: Visions, Trends, and Prospects
Current key initiatives in deep-space optical communications are treated in terms of historical context, contemporary trends, and prospects for the future. An architectural perspective focusing on high-level drivers, systems, and related operations concepts is provided. Detailed subsystem and component topics are not addressed. A brief overview of past ideas and architectural concepts sets the stage for current developments. Current requirements that might drive a transition from radio frequencies to optical communications are examined. These drivers include mission demand for data rates and/or data volumes; spectrum to accommodate such data rates; and desired power, mass, and cost benefits. As is typical, benefits come with associated challenges. For optical communications, these include atmospheric effects, link availability, pointing, and background light. The paper describes how NASA's Space Communication and Navigation Office will respond to the drivers, achieve the benefits, and mitigate the challenges, as documented in its Optical Communications Roadmap. Some nontraditional architectures and operations concepts are advanced in an effort to realize benefits and mitigate challenges as quickly as possible. Radio frequency communications is considered as both a competitor to and a partner with optical communications. The paper concludes with some suggestions for two affordable first steps that can yet evolve into capable architectures that will fulfill the vision inherent in optical communications.
space communication↗
Comparing On-Orbit and Ground Performance for an S-Band Software-Defined Radio
NASA's Space Communications and Navigation Testbed was installed on an external truss of the International Space Station in 2012. The testbed contains several software-defined radios (SDRs), including the Jet Propulsion Laboratory (JPL) SDR, which underwent performance testing throughout 2013 with NASA's Tracking and Data Relay Satellite System (TDRSS). On-orbit testing of the JPL SDR was conducted at S-band with the Glenn Goddard TDRSS waveform and compared against an extensive dataset collected on the ground prior to launch. This paper will focus on the development of a waveform power estimator on the ground post-launch and discuss the performance challenges associated with operating the power estimator in space.
waveforms↗
Comparing On-Orbit and Ground Performance for an S-Band Software-Defined Radio
NASA's Space Communications and Navigation Testbed was installed on an external truss of the International Space Station in 2012. The testbed contains several software-defined radios (SDRs), including the Jet Propulsion Laboratory (JPL) SDR, which underwent performance testing throughout 2013 with NASAs Tracking and Data Relay Satellite System (TDRSS). On-orbit testing of the JPL SDR was conducted at S-band with the Glenn Goddard TDRSS waveform and compared against an extensive dataset collected on the ground prior to launch. This paper will focus on the development of a waveform power estimator on the ground post-launch and discuss the performance challenges associated with operating the power estimator in space.
International Space Station↗
Technique Developed for Optimizing Traveling-Wave Tubes
A traveling-wave tube (TWT) is an electron beam device that is used to amplify electromagnetic communication waves at radio and microwave frequencies. TWT s are critical components in deep-space probes, geosynchronous communication satellites, and high-power radar systems. Power efficiency is of paramount importance for TWT s employed in deep-space probes and communications satellites. Consequently, increasing the power efficiency of TWT s has been the primary goal of the TWT group at the NASA Lewis Research Center over the last 25 years. An in-house effort produced a technique (ref. 1) to design TWT's for optimized power efficiency. This technique is based on simulated annealing, which has an advantage over conventional optimization techniques in that it enables the best possible solution to be obtained (ref. 2). A simulated annealing algorithm was created and integrated into the NASA TWT computer model (ref. 3). The new technique almost doubled the computed conversion power efficiency of a TWT from 7.1 to 13.5 percent (ref. 1).
Wilson, Jeffrey D.↗
An Envisioned Future for Space Optical Communications
Since the beginning of the Space Age, NASA has been a leader in developing space communications and navigation technologies— especially during the Apollo missions to the Moon and NASA’s initial foray into deep space. To support future exploration and science needs, NASA is gradually introducing optical communications technologies to augment its radio frequency (RF) systems. Optical communications will enable new science and exploration missions by providing high data rates and better navigation over long distances. NASA has already flown several optical communications demonstrations, including the Lunar Laser Communications Demonstration (LLCD), the Laser Communications Relay Demonstration (LCRD), and the Terabyte Infrared Delivery (TBIRD) system. Historically, NASA has partnered with the Jet Propulsion Laboratory (JPL) and the Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL) to develop optical communications technology. In addition to pursuing optical communications, NASA’s Space Communications and Navigation (SCaN) Program is undergoing a paradigm shift and moving away from government owned and operated networks to using commercial services whenever possible. In partnership with SCaN, NASA’s Space Technology Mission Directorate (STMD) has identified key technologies that need to be developed to support future space communications and navigation, including enhanced RF, optical, and 3rd Generation Partnership (3GPP) cellular capabilities, as well as high-speed networking. This paper briefly describes some current and upcoming optical demonstrations and provides an overview of STMD’s envisioned future for optical communications and navigation in the 2030+ timeframe.
Bernard L Edwards↗
Electromagnetic compatibility and the all-electric airplane
NASA is studying the feasibility of installing 'all-electric' controls in future commercial aircraft, replacing the current hydraulic and pneumatic systems. Planes utilizing such equipment should weigh less and be cheaper to maintain, but might also be susceptible to interference from undesired external electromagnetic fields. Possible sources of these extraneous signals include radio and television broadcasters, two-way communications stations, and radar installations of all kinds. One way to reduce the hazard would be to use fiber-optic cables to carry signals from the cockpit to the various points of use, a concept known as 'fly-by-light' or FBL. However, electrical circuits (PBW, or 'power-by-wire') would still be required at both ends of the cables to perform control functions, so the possibility of harmful interference would remain. Computer models for two different antennas were created in order to find the magnitude of the electric fields which would be generated in the airspace around them while in the transmit mode. The first antenna was a horizontal 'rhombic' used by the Voice of America (VOA) for long-distance short-wave broadcasting. The second antenna was a multi-element 'log-periodic dipole array' (LPDA) of a type often used for two-way radio communications. For each case, a specified amount of power was applied in the computer model, and the resulting electric field intensity was predicted at a variety of locations surrounding the antenna. This information will then be used to calculate the levels of interference which could occur inside an airplane flying in the vicinity of these radiation emitters.
Christman, Al↗
Modeling and Simulation for Realistic Propagation Environments of Communications Signals at SHF Band
In this article, most of widely accepted radio wave propagation models that have proven to be accurate in practice as well as numerically efficient at SHF band will be reviewed. Weather and terrain data along the signal's paths can be input in order to more accurately simulate the propagation environments under particular weather and terrain conditions. Radio signal degradation and communications impairment severity will be investigated through the realistic radio propagation channel simulator. Three types of simulation approaches in predicting signal's behaviors are classified as: deterministic, stochastic and attenuation map. The performance of the simulation can be evaluated under operating conditions for the test ranges of interest. Demonstration tests of a real-time propagation channel simulator will show the capabilities and limitations of the simulation tool and underlying models.
simulation↗
Initial Characterization of Optical Communications with Disruption-Tolerant Network Protocols
Disruption-tolerant networks (DTNs) are groups of network assets connected with a suite of communication protocol technologies designed to mitigate the effects of link delay and disruption. Application of DTN protocols to diverse groups of network resources in multiple sub-networks results in an overlay network-of-networks with autonomous data routing capability. In space environments where delay or disruption is expected, performance of this type of architecture (such as an interplanetary internet) can increase with the inclusion of new communications mediums and techniques. Space-based optical communication links are therefore an excellent building block of space DTN architectures. When compared to traditional radio frequency (RF) communications, optical systems can provide extremely power-efficient and high bandwidth links bridging sub-networks. Because optical links are more susceptible to link disruption and experience the same light-speed delays as RF, optical-enabled DTN architectures can lessen potential drawbacks and maintain the benefits of autonomous optical communications over deep space distances. These environment-driven expectations - link delay and interruption, along with asymmetric data rates - are the purpose of the proof-of-concept experiment outlined herein. In recognizing the potential of these two technologies, we report an initial experiment and characterization of the performance of a DTN-enabled space optical link. The experiment design employs a point-to-point free-space optical link configured to have asymmetric bandwidth. This link connects two networked systems running a DTN protocol implementation designed and written at JPL for use on spacecraft, and further configured for higher bandwidth performance. Comparing baseline data transmission metrics with and without periodic optical link interruptions, the experiment confirmed the DTN protocols' ability to handle real-world unexpected link outages while maintaining capability of reliably delivering data at relatively high rates. Finally, performance characterizations from this data suggest performance optimizations to configuration and protocols for future optical-specific DTN space link scenarios.
Space networking↗
Development of an Optical Slice for an RF and Optical Software Defined Radio
A key component in the Integrated Radio and Optical Communications project at the National Aeronautics and Space Administration's (NASA) Glenn Research Center (GRC) is the radio frequency (RF) and optical software defined radio (SDR). A NASA RF SDR might consist of a general purpose processor to run the Space Telecommunications Radio System (STRS) Architecture for radio command and control, a reconfigurable signal processing device such as a field programmable gate array (FPGA) which houses the waveform, and a digital to analog converter (DAC) for transmitting data. Prior to development, SDR architecture trades on how to combine the RF and optical elements were studied. A modular architecture with physically separate RF and optical hardware slices was chosen and the optical slice of an SDR was designed and developed. The Harris AppSTARTM platform, which consists of an FPGA processing platform with a mezzanine card targeted for RF communications, was used as the base platform in prototyping the optical slice. A serially concatenated pulse position modulation (SCPPM) optical waveform was developed. The waveform follows the standard described in the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization Red Book. A custom optical mezzanine printed circuit board card was developed at NASA GRC for optical transmission. The optical mezzanine card replaces the DAC, which is used in the transmission of RF signals. This paper describes RF and optical SDR architecture trades, the Harris AppSTAR platform, the design of the SCPPM waveform, and the development of the optical mezzanine card.
Nappier, Jennifer M.↗
Space-Based Optical Communications with CubeSats
Optical communication systems use lasers to encode and transmit data with higher speed and density than traditional radio frequency (RF)-based communications. Smaller antennas, lower power requirements, and increased spectrum availability enable optical communications to be integrated into CubeSats more easily than radios, enabling afford-able communications solutions for future NASA missions.
Ebert, Monica L.↗
Radio waves and circuits
Diffraction and scattering of electromagnetic waves, radio wave propagation in ionized media, radio antennas, and signal processing in communications systems
CIRCUIT↗
Alternative licensing arrangements and spectrum economics: The case of multipoint distribution service
At present, the Federal Communications Commission assigns radio licenses following a determination of the public interest. Whenever mutually conflicting license applications are filed, the Commission holds a comparative hearing. This assignment mechanism is criticized as cumbersome and unrealiable, and three alternatives are proposed: increasing the available spectrum, and either auctions or lotteries of radio licenses. An analysis is presented of the present system and these alternative arrangments for assigning rights to the frequency spectrum for the Multipoint Distribution Service (MDS). Although MDS is a relatively minor radio service, it serves as a prototype for message distribution services with a large potential for use in business communications. Moreover, the way in which the initial batch of MDS licenses was assigned provides a unique opportunity for empirical work on the economics of the licensing process.
Agnew, C. E.↗
A Microwave Performance Calibration System for NASA's Deep Space Network Antennas, Part 1: Assessment of Antenna Gain and Pointing, and Calibration of Radio Sources
The NASA JPL Deep Spae Network (DSN) of large, dual reflector antennas is subject to continuing demands for improved performance and reliabilty as a result of communications, control, and radio science requirement for future missions.
Beam Waveguide (BWG) antennas antenna gain and poi↗