Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative Permeability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Review: Pre-Darcy flows in low-permeability porous media

The widely used Darcy’s law specifies a linear relation between the Darcy velocity of fluid flow and the pressure gradient that drives the flow. However, studies have shown that Darcy velocity can exhibit a nonlinear dependence on the pressure gradient in low-permeability porous media such as clay and shale when the pressure gradient is adequately low. This phenomenon is referred to as low-velocity non-Darcian flow or pre-Darcy flow. This paper provides a comprehensive review of the theories, experimental data, and modeling methods for pre-Darcy flow in low-permeability porous media. The review begins by outlining the fundamental mechanisms underlying pre-Darcy flow that regulate the unique characteristics such as nonlinear dependence of the Darcy velocity on the pressure gradient and its relevance to fluid–rock interactions. The review then proceeds to present a thorough compilation of experimental investigations performed in various low-permeability geomaterials including tight sandstones, shales, and clays. Next, empirical and theoretical models and simulation methods that have been developed to fit and interpret experimental data are reviewed. Finally, the review underscores the challenges encountered in conducting and interpreting pre-Darcy flow experiments and suggests future research directions. By analyzing previous experimental investigations, this review aims to offer a valuable resource for researchers and practitioners seeking to enhance their understanding of fluid dynamics in low-permeability geomaterials. This provides insights into the application of pre-Darcy flow in numerous natural and engineered processes such as shale oil and gas recovery, contaminant transport in low-permeability aquifers, and geological disposal of nuclear waste.

58 GEOSCIENCES↗

Design and Gas Separation Performance of Imidazolium Poly(ILs) Containing Multivalent Imidazolium Fillers and Crosslinking Agents

This work introduces a series of vinyl-imidazolium-based polyelectrolyte composites, which were structurally modified via impregnation with multivalent imidazolium-benzene ionic liquids (ILs) or crosslinked with novel cationic crosslinkers which possess internal imidazolium cations and vinylimidazolium cations at the periphery. A set of eight [C4vim][Tf2N]-based membranes were prepared via UV-initiated free radical polymerization, including four composites containing di-, tri-, tetra-, and hexa-imidazolium benzene ILs and four crosslinked derivatives which utilized tri- and tetra- vinylimidazolium benzene crosslinking agents. Structural and functional characterizations were performed, and pure gas permeation data were collected to better understand the effects of “free” ILs dispersed in the polymeric matrix versus integrated ionic crosslinks on the transport behaviors of these thin films. These imidazolium PIL:IL composites exhibited moderately high CO2 permeabilities (~20–40 Barrer), a 4–7× increase relative to corresponding neat PIL, with excellent selectivities against N2 or CH4. The addition of imidazolium-benzene fillers with increased imidazolium content were shown to correspondingly enhance CO2 solubility (di- < tri- < tetra- < hexa-), with the [C4vim][Tf2N]: [Hexa(Im+)Benz ][Tf2N] composite showing the highest CO2 permeability (PCO2 = 38.4 Barrer), while maintaining modest selectivities (αCO2/CH4 = 20.2, αCO2/N2 = 23.6). Additionally, these metrics were similarly improved with the integration of more ionic content bonded to the polymeric matrix; increased PCO2 with increased wt% of the tri- and tetra-vinylimidazolium benzene crosslinking agent was observed. This study demonstrates the intriguing interactions and effects of ionic additives or crosslinkers within a PIL matrix, revealing the potential for the tuning of the properties and transport behaviors of ionic polymers using ionic liquid-inspired small molecules.

36 MATERIALS SCIENCE↗

Hydrate-bearing sands in the Terrebonne Basin record the transition from ponded deposition to bypass in the deep-water Gulf of Mexico

Here, we integrated well and seismic data to interpret the stratigraphic architecture and the paleogeographic evolution of two hydrate-bearing sand reservoirs in the Terrebonne Basin in the deep-water Gulf of Mexico. These sands were deposited during the final stage of ponded fill within the Terrebonne Basin. The Green sand filled the final accommodation in the basin as a perched apron; it was formed coincidentally with downstream erosion and sediment bypass which cut through a canyon formed on the southeastern edge of the basin. Subsequently, a low energy turbidite channel continued to bypass sediment through the basin and aggrade. The Orange sand was then deposited as a second perched apron and it was once again incised by the low energy turbidite channel. The Green and Orange sands are regional sheet sands that extend and thicken deep into the Terrebonne Basin. They provide a connected regional aquifer that captured and focused gas migration to the crest of the structure where hydrate was formed. These sands were formed by large, unconfined, turbidity flows. We envision that they will be composed of coarser grained deposits relative to previously explored hydrate reservoirs within levee deposits. As such, they have the potential to be relatively coarse grained and hence have higher permeability: a condition favorable to production of hydrate deposits.

3D seismic interpretation↗

Crosslinked Matrimid®-like polyimide membranes with unimodal network structure for enhanced stability and gas separation performance

Gas separation membranes have attracted academic and industrial attention, and crosslinking has been identified to be one of the most effective ways to enhance membrane stability. In this paper, a series of crosslinked Matrimid®-like films with unimodal network structures are prepared via thermally end-linking phenylethnyl-terminated BTDA-DAPI oligomers with well-controlled molecular weight (i.e., 3000–15,000 g/mol), wherein the crosslink density (the inter-crosslink chain length) of resulting unimodal networks is systematically varied by using oligomers with various molecular weight. Comprehensive characterizations of chemical structure, thermal properties, microstructures are performed. Pure-gas permeation measurements are performed focusing on H 2 /CH 4 and CO 2 /CH 4 separations as a function of crosslink density. In sharp contrast to the commonly observed permeability reduction in randomly crosslinked networks, all the crosslinked unimodal films, even when densely crosslinked, present markedly enhanced permeability and well-maintained ideal selectivity relative to the uncrosslinked linear counterpart, leading to almost horizontal movements towards upper bounds along with expectedly enhanced membrane stability. In conclusion, it is concluded that introducing bulky groups at the crosslink sites provide a practical means to counteract the densification effect induced by crosslinking and the construction of unimodal networks exemplifies a fundamentally new strategy to regulate the microstructure and property of crosslinked membranes for gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Simple Model of Gas Flow in a Porous Powder Compact

This report describes a simple model for ideal gas flow from a vessel through a bed of porous material into another vessel. It assumes constant temperature and uniform porosity. Transport is treated as a combination of viscous and molecular flow, with no inertial contribution (low Reynolds number). This model can be used to fit data to obtain permeability values, determine flow rates, understand the relative contributions of viscous and molecular flow, and verify volume calibrations. It draws upon the Dusty Gas Model and other detailed studies of gas flow through porous media.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A simple model of gas flow in a porous powder compact

This report describes a simple model for ideal gas flow from a vessel through a bed of porous material into another vessel. It assumes constant temperature and uniform porosity. Transport is treated as a combination of viscous and molecular flow, with no inertial contribution (low Reynolds number). This model can be used to fit data to obtain permeability values, determine flow rates, understand the relative contributions of viscous and molecular flow, and verify volume calibrations. It draws upon the Dusty Gas Model and other detailed studies of gas flow through porous media.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NEAR-SURFACE GEOPHYSICAL CHARACTERIZATION OF A HOLOCENE FAULT CONDUCIVE TO GEOTHERMAL FLOW NEAR PYRAMID LAKE, NEVADA

Linear deposits of calcium carbonate tufa columns mark recent faults that cut 11 ka Lake Lahontan sediments at Astor Pass, north of Pyramid Lake, Nevada. Throughout the Great Basin, faults appear to control the location of geothermal resources by providing pathways for fluid migration. Reservoir-depth (greater than 1 km) seismic imaging at Astor Pass reveals a fault that projects to one of the lines of tufa columns at the surface. The presence of the tufa deposits suggests this fault carried warm geothermal waters through the lakebed clay sediments in recent time. The warm fluids deposited the tufa when they hit cold Lake Lahontan water at the lakebed. Lake Lahontan covered this location 11 ka to a depth of at least 60 m. In collaboration with the Pyramid Lake Paiute Tribe, an Applied Geophysics class at UNR investigated the near-surface geophysical characteristics of this fault. The survey at and near the tufa columns comprises near-surface Pwave seismic reflection and refraction, electrical resistivity tomography, nearsurface refraction microtremor arrays, nine near-surface direct-current resistivity soundings, magnetic surveys, and gravity surveys. The refraction microtremor results show shear velocities near tufa and faults to be marginally lower, compared to Vs away from the faults. Overall, the 30-m depth-averaged shear velocities are low, less than 300 m/s, consistent with the lakebed clay deposits. These results indicate that no seismically fast (> 500 m/s) tufa deposits are present below the surface at or near the tufa columns. Vs30 averages were for example 274 ± 13 m/s on the fault, 287 ± 2 m/s at 150 m east of the fault, and 290 ± 15 m/s at 150 m west of the fault. The P-velocity refraction optimization results similarly indicate a lack of high-velocity tufa buried below the surface in the Lahontan sediments, reinforcing the idea that all tufa was deposited above the lakebed surface. The seismic results provide a negative test of the hypothesis that deposition of the lakebeds in the Quaternary buried and preserved older tufa columns within the section. Near-surface Wenner arrays with a-spacings up to 30 m show a higher resistivity near the faults, and tufa, than away from the faults. Resistivity averages within a few meters of the surface were 33 ± 17 ohm-m on the fault, 13 ± 3 ohm-m east of the fault, and 9 ± 3 ohm-m west of the fault. It is possible that the geothermal waters are fresher, and more resistive, than waters held in the lakebed clays. Water samples from more than 1 km depth in exploration wells have a TDS of 2500 p.p.m., nearly drinking-water quality. The relatively resistive water, perhaps localized by greater permeability along the fault, could explain the higher resistivity measured near the fault. The results show that there is no high-velocity, high-resistivity tufa along the faults below the surface, so we are unable to use buried tufa to locate the faults that may promote geothermal upwelling in this area. We further hypothesize that as sedimentation buried the tufa during the Quaternary, warm geothermal waters re-dissolved it, and re-precipitated it in the cold lake-bottom water.

15 GEOTHERMAL ENERGY↗

Effective detection of CO 2 leakage: a comparison of groundwater sampling and pressure monitoring

Shallow aquifer monitoring is likely to be a required aspect to any geologic CO 2 sequestration operation. Collecting groundwater samples and analyzing for geochemical parameters such as pH, alkalinity, total dissolved carbon, and trace metals has been suggested by a number of authors as a possible strategy to detect CO 2 leakage. The effectiveness of this approach, however, will depend on the hydrodynamics of the leak-induced CO 2 plume and the spatial distribution of the monitoring wells relative to the origin of the leak. To our knowledge, the expected effectiveness of groundwater sampling to detect CO 2 leakage has not yet been quantitatively assessed. In this study we query hundreds of simulations developed for the National Risk Assessment Project (US DOE) to estimate risks to drinking water resources associated with CO 2 leaks. The ensemble of simulations represent transient, 3-D multi-phase reactive transport of CO 2 and brine leaked from a sequestration reservoir, via a leaky wellbore, into an unconfined aquifer. Key characteristics of the aquifer, including thickness, mean permeability, background hydraulic gradient, and geostatistical measures of aquifer heterogeneity, were all considered uncertain parameters. Complex temporally-varying CO 2 and brine leak rate scenarios were simulated using a heuristic scheme with ten uncertain parameters. The simulations collectively predict the spatial and temporal evolution of CO 2 and brine plumes over 200 years in a shallow aquifer under a wide range of leakage scenarios and aquifer characteristics. Using spatial data from an existing network of shallow drinking water wells in the Edwards Aquifer, TX, as one illustrative example, we calculated the likelihood of leakage detection by groundwater sampling. In this monitoring example, there are 128 wells available for sampling, with a density of about 2.6 wells per square kilometer. If the location of the leak is unknown a priori, a reasonable assumption in many cases, we found that the leak would be detected in at least one of the monitoring wells in less than 10% of the scenarios considered. This is because plume sizes are relatively small, and so the probability of detection decreases rapidly with distance from the leakage point. For example, 400m away from the leakage point there is less than 20% chance of detection. We then compared the effectiveness of groundwater quality sampling to shallow aquifer and/or reservoir pressure monitoring. For the Edwards Aquifer example, pressure monitoring in the same monitoring well network was found to be even less effective that groundwater quality monitoring. This is presumably due to the unconfined conditions and relatively high permeability, so pressure perturbations quickly dissipate. Although specific results may differ from site to site, this type of analysis should be useful to site operators and regulators when selecting leak detection strategies. Given the spatial characteristics of a proposed monitoring well network, probabilities of leakage detection can be rapidly calculated using this methodology. Although conditions such as these may not be favorable for leakage detection in shallow aquifers, leakage detection could be much more successful in the injection reservoir. We demonstrate proof-of-concept for this hypothesis, presenting a simulation where there is measurable pressure change at the injection well due to overpressurization, fault rupture, and consequent leakage up the fault into intermediate and shallow aquifers. The size of the detectible pressure change footprint is much larger in the reservoir than in either of the overlying aquifers. Further exploration of the range of conditions for which this technique would be successful is the topic of current study.

54 ENVIRONMENTAL SCIENCES↗

A Permeable Active Amendment Concrete (Paac) For Contaminant Remediation and Erosion Control

The final project report for SEED SERDP ER - 2134 describes the development of permeable active amendment concrete (PAAC), which was evaluated through four tasks: 1) development of PAAC; 2) assessment of PAAC for contaminant removal; 3) evaluation of promising PAAC formulations for potential environmental impacts; and 4) assessment of the hydraulic, physical, and structural properties of PAAC. Conventional permeable concrete (often referred to as pervious concrete) is concrete with high porosity as a result of an extensive and interconnected void content. It is made from carefully controlled amounts of water and cementitious materials used to create a paste that forms a coating around aggregate particles. The mixture has a substantial void content (e.g., 15% - 25%) that results in a highly permeable structure that drains quickly. In PAAC, the aggregate material is partly replaced by chemically-active amendments that precipitate or adsorb contaminants in water that flows through the concrete interstices. PAAC combines the relatively high structural strength, ample void space, and water permeability of pervious concrete with the contaminant sequestration ability of chemically-active amendments to produce a new material with superior durability and ability to control contaminant mobility. The high surface area provided by the concrete interstices in PAAC provides significant opportunity for contaminants to react with the amendments incorporated into the concrete matrix. PAAC has the potential to immobilize a large variety of organic and inorganic contaminants by incorporating different active sequestering agents including phosphate materials (rock phosphate), organoclays, zeolite, and lime individually or in combinations.

36 MATERIALS SCIENCE↗

Permeability and elastic modulus of cement paste as a function of curing temperature

The permeability and elastic modulus of mature cement paste cured at temperatures between 8 Degree-Sign C and 60 Degree-Sign C were measured using a previously described beam bending method. The permeability increases by two orders of magnitude over this range, with most of the increase occurring when the curing temperature increases from 40 Degree-Sign C to 60 Degree-Sign C. The elastic modulus varies much less, decreasing by about 20% as the curing temperature increases from 20 Degree-Sign C to 60 Degree-Sign C. All specimens had very low permeability, k < 0.1 nm{sup 2}, despite having relatively high porosity, {phi} {approx} 40%. Concomitant investigations of the microstructure using small angle neutron scattering and thermoporometry indicate that the porosity is characterized by nanometric pores, and that the characteristic size of pores controlling transport increases with curing temperature. The variation of the microstructure with curing temperature is attributed to changes in the pore structure of the calcium-silicate-hydrate reaction product. Both the empirical Carmen-Kozeny, and modified Carmen-Kozeny permeability models suggest that the tortuosity is very high regardless of curing temperature, {xi} {approx} 1000.

36 MATERIALS SCIENCE↗

Numerical investigation of Lower Tuscaloosa Sandstone and Selma Chalk caprock under geological CO 2 sequestration conditions: mineral precipitation and permeability evolution

Abstract A numerical model was developed using CrunchFlow to simulate reactive transport and porosity and permeability changes of sandstone and carbonate rock samples taken from the Lower Tuscaloosa Formation and the Selma Chalk Formation, Jackson County, MS, USA. The model predicted a permeability decrease from 2190 mD to 2038 mD for the Lower Tuscaloosa Sandstone sample in a static batch reactor after 180 days of exposure to CO 2 ‐saturated brine, which is consistent with measured permeability results. The model predicted a negligible permeability change from 2.00 mD to 2.08 mD for the Selma Chalk carbonate sample after 180 days of exposure to CO 2 ‐saturated brine. Based on model prediction, key mineral dissolution and precipitation reactions in the Lower Tuscaloosa Sandstone sample include dissolution of quartz, chlorite, and feldspar, as well as precipitation of amorphous silica and kaolinite. For the Selma Chalk carbonate sample, key predicted reactions include dissolution of calcite, quartz and chlorite, and precipitation of kaolinite and amorphous silica. Initial porosity, initial feldspar content and the exponent n value (related to pore structure and tortuosity) used in permeability calculations were three important factors affecting permeability evolution of sandstone samples under CO 2 sequestration conditions. The small permeability change predicted for both the Lower Tuscaloosa Sandstone and the Selma Chalk caprock after exposure to CO 2 ‐saturated brine suggests that poro‐permeability changes during CO 2 injection into the Lower Tuscaloosa Formation are not likely to significantly affect reservoir and seal quality. © 2017 Society of Chemical Industry and John Wiley & Sons, Ltd.

Zhang, Liwei↗

On the Importance of Advective Versus Diffusive Transport in Controlling the Distribution of Methane Hydrate in Heterogeneous Marine Sediments

The occurrence of methane hydrate in marine reservoirs often correlates with the physical properties of the host sediments. High hydrate saturations (>60% of the pore volume) found in association with coarser-grained strata have been attributed to both enhanced advective transport through more permeable sediment layers and to perturbations in phase equilibrium related to pore space geometry that results in increased diffusive transport. To assess the relative importance of these mechanism in controlling hydrate occurrence, we develop a 1-D model for hydrate growth along dipping, coarse-grained layers embedded in a fine-grained sediment package. We explicitly account for pore size effects on methane solubility and permeability-driven variations in fluid flux. We show how the vertical distribution of hydrate varies in response to changes in grain size and rates of fluid advection, sedimentation, and in situ methane production. We then use our model to simulate centimeter-scale variations in hydrate saturation observed at Walker Ridge Block 313, Hole H in the Gulf of Mexico. We find that the largest concentrations of hydrate are controlled by diffusion, while increased advective methane supply favors more distributed growth throughout high-permeability regions. Our results hold promise for using well log-derived estimates of hydrate saturation to infer sediment properties and the sources and rates of methane supply during reservoir emplacement.

58 GEOSCIENCES↗

Predicting a Drug’s Membrane Permeability: A Computational Model Validated With in Vitro Permeability Assay Data

Membrane permeability is a key property to consider during the drug design process, and particularly vital when dealing with small molecules that have intracellular targets as their efficacy highly depends on their ability to cross the membrane. In this work, we describe the use of umbrella sampling Molecular Dynamics (MD) computational modeling to comprehensively assess the passive permeability profile of a range of compounds through a lipid bilayer. The model was initially calibrated through in vitro validation studies employing a Parallel Artificial Membrane Permeability Assay (PAMPA). The model was subsequently evaluated for its quantitative prediction of permeability profiles for a series of custom synthesized and closely related compounds. The results exhibited substantially improved agreement with the PAMPA data, relative to alternative existing methods. Our work introduces a computational model that underwent progressive molding and fine-tuning as a result of its synergistic collaboration with numerous in vitro PAMPA permeability assays. The presented computational model introduces itself as a useful, predictive tool for permeability prediction.

59 BASIC BIOLOGICAL SCIENCES↗

Uranium storage mechanisms in wet-dry redox cycled sediments

Biogeochemical redox processes that govern radionuclide mobility in sediments are highly sensitive to forcing by the water cycle. For example, episodic draining and intrusion of oxidants into reduced zones during dry seasons can create biogeochemical hot moments that change microbial activity, affect redox status of minerals, initiate changes in sediment gas and water transport, and stimulate release of organic carbon, iron, and sulfur. In the upper Colorado River Basin, water-saturation of organic-enriched sediments locally creates reducing conditions that accumulate U. Subsequently, fluctuating hydrological conditions introduce oxidants which may reach internal portions of these sediments and reverse their role to become secondary sources of U. Knowledge of the impact of hydrological variability on the alternating import and export of contaminants, including U, is required to predict contaminant mobility and short- and long-term impacts on water quality. In this study, we tracked U, Fe, and S oxidation state and speciation to characterize the variability in redox processes and related U solubility within a shallow fine-textured organic-enriched sediment at the legacy U ore processing site at Shiprock, NM. Previous studies have reported uranium speciation and behavior in permanently saturated fine-grained naturally reduced sediments. This is the first report of U behavior in fine-grained reduced sediments that are experience cyclic redox cycling due to seasonal fluctuations in moisture content. Our results support previous observations that reducing conditions are needed to accumulate U in sediments, but they dispute the expectation that U predominantly accumulates as U(IV); our data reveal that U may accumulate as U(VI) in equal proportion to U(IV). Surprisingly, high abundances of U(VI) confined in the reduced sediments suggests that redox cycling is needed to promote its accumulation. We propose a new process model, where redox oscillations driven by annual water table fluctuations, accompanied by strong evapotranspiration in low permeability sediments, promote conversion of U(IV) to relatively immobile U(VI), which suggests long-term U immobilization resistant to redox perturbations. This observation contradicts the common idea that U(IV) accumulated in reducing conditions is systematically solubilized and transported to groundwater during re-oxidation.

54 ENVIRONMENTAL SCIENCES↗

MINERALOGICAL AND TEXTURAL CONTROLS ON SHEAR STRENGTH, SLIP STABILITY AND PERMEABILITY OF FAULTS

Induced seismicity resulting from fluid injection into the subsurface related to water and CO2 disposal, hydraulic fracturing and the stimulation of geothermal reservoirs present an important societal concern. These human activities involve the injection of large volumes of pressurized fluid into the subsurface, potentially at high rates, raising local pore pressures and disturbing the pristine local stress regime by lowering effective normal stress on pre-existing faults and fractures. The reduction of effective normal stress may trigger fault/fracture reactivation and in some cases result in hazardous seismic ruptures. Effective management and engineering of anthropogenic seismic events requires substantial understanding in the mechanisms, especially for the controlling factors on coupled rheological and transport response, including fault shear strength, slip stability, and permeability evolution during such events. In this study, we explore the coupled rheological and transport response of faults and fractures during reactivation as controlled by two fundamental controlling properties, viz., mineralogy and textural features. We approach this problem through shear experiments on analog faults and fractures via laboratory and numerical experiments. Specifically, we investigate: (1) the influence of frictionally weak minerals (talc) in mixtures of mineral analogs featuring contrasting frictional properties, (2) the influence of iron oxide grain coatings on quartz aggregates, and (3) the influence of fracture roughness in mated fractures on the ensemble shear strength, slip stability, and permeability evolution during reactivation events. We address the following questions in this study: (1) how much and what distribution of frictionally weak minerals is required to induce significant weakening in faults consisting of a matrix of frictionally strong minerals, (2) how does a pre-imposed weak mineral layer influence the rheological and transport behavior of faults, (3) what is the influence of a trace amount of grain coating materials introduce on the coupled behavior of faults, and finally (4) how do asperity height and wave length control the ensemble behavior of faults. These questions are explicitly answered in the following.

58 GEOSCIENCES↗

Passive membrane transport of lignin-related compounds

Lignin is an significant aromatic polymer found in plant secondary cell walls. Recently, lignin has attracted renewed interest as a feedstock for bio-based chemicals via catalytic and biological approaches and has emerged as a target for genetic engineering to improve lignocellulose digestibility by altering its composition. In lignin biosynthesis and microbial conversion, small phenolic lignin precursors or degradation products cross membrane bilayers through an unidentified translocation mechanism prior to incorporation into lignin polymers (synthesis) or catabolism (bioconversion), with both passive and transporter-assisted mechanisms postulated. To test the passive permeation potential of these phenolics, we performed molecular dynamics simulations for 69 monomeric and dimeric lignin-related phenolics with 3 model membranes to determine the membrane partitioning and permeability coefficients for each compound. The findings support an accessible passive permeation mechanism for most compounds, including monolignols, dimeric phenolics, and the flavonoid, tricin. Computed lignin partition coefficients are consistent with concentration enrichment near lipid carbonyl groups, and permeability coefficients are sufficient to keep pace with cellular metabolism. Interactions between methoxy and hydroxy groups are found to reduce membrane partitioning and improve permeability. Only carboxylate-modified or glycosylated lignin phenolics are predicted to require transporters for membrane translocation. Overall, the results suggest that most lignin-related compounds can passively traverse plant and microbial membranes on timescales commensurate with required biological activities, with any potential transport regulation mechanism in lignin synthesis, catabolism, or bioconversion requiring compound functionalization.

09 BIOMASS FUELS↗

Independent technical review of the c-400 interim remedial project phase I results, paducah, kentucky

The groundwater and soil in the vicinity of the C-400 Building at the Paducah Gaseous Diffusion Plant (PGDP), is contaminated with substantial quantities of industrial solvents, primarily trichoroethene (TCE). This solvent 'source' is recognized as a significant challenge and an important remediation target in the overall environmental cleanup strategy for PGDP. Thus, the cleanup of the C-400 TCE Source is a principal focus for the Department of Energy (DOE) and its contractors, and for PGDP regulators and stakeholders. Using a formal investigation, feasibility study and decision process, Electrical Resistance Heating (ERH) was selected for the treatment of the soil and groundwater in the vicinity of C-400. ERH was selected as an interim action to remove 'a significant portion of the contaminant mass of TCE at the C-400 Cleaning Building area through treatment' with the longer term goal of reducing 'the period the TCE concentration in groundwater remains above its Maximum Contaminant Level (MCL).' ERH is a thermal treatment that enhances the removal of TCE and related solvents from soil and groundwater. The heterogeneous conditions at PGDP, particularly the high permeability regional gravel aquifer (RGA), are challenging to ERH. Thus, a phased approach is being followed to implement this relatively expensive and complex remediation technology. Conceptually, the phased approach encourages safety and efficiency by providing a 'lessons learned' process and allowing appropriate adjustments to be identified and implemented prior to follow-on phase(s) of treatment. More specifically, early deployment targeted portions of the challenging RGA treatment zone with relatively little contamination reducing the risk of adverse collateral impacts from underperformance in terms of heating and capture. Because of the importance and scope of the C-400 TCE source remediation activities, DOE chartered an Independent Technical Review (ITR) in 2007 to assess the C-400 ERH plans prior to deployment and a second ITR to evaluate Phase I performance in September 2010. In this report, these ITR efforts are referenced as the '2007 ITR' and the 'current ITR', respectively. The 2007 ITR document (Looney et al., 2007) provided a detailed technical evaluation that remains relevant and this report builds on that analysis. The primary objective of the current ITR is to provide an expedited assessment of the available Phase I data to assist the PGDP team as they develop the lessons learned from Phase I and prepare plans for Phase II.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interfacial Engineering of Supported Liquid Membranes by Vapor Cross-Linking for Enhanced Separation of Carbon Dioxide

Supported liquid membranes (SLMs) based on ionic liquids (ILs) with not only high gas permeability and selectivity, but also high stability under high pressure, are highly desired for gas separation applications. In this paper, permeable and selective polyamide network (PN) layers are deposited on the surface of SLMs by utilizing the cross-linking reaction of trimesoyl chloride, which was pre-dispersed in the SLMs, and vapor of amine linkers. The vapor cross-linking method makes it easy to control the growth and aggregation of PN layers, owing to the significantly reduced reaction rate, and thereby ensuring the good distribution of PN layers on the surface of SLMs. With rational choice of amine linkers and optimization of vapor cross-linking conditions, the prepared sandwich-like PN@SLMs with ILs embedded homogeneously within polymeric matrices displayed much-improved CO 2 permeability and CO 2 /N 2 selectivity in relation to the pristine SLMs. Moreover, those SLMs with ILs impregnated into porous supports physically displayed improved stability under high pressure after vapor cross-linking, because the PN layers formed on the surface of SLMs help prevent the ILs from being squeezed out. Finally, this interfacial engineering strategy represents a significant advance in the surface modification of SLMs to endow them with promising applications in CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗