Search NASA⌕ Search

SEARCH · Search NASA

Results for “Remote manipulator system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Evaluation of SMART sensor displays for multidimensional precision control of Space Shuttle remote manipulator

An enhanced proximity sensor and display system was developed at the Jet Propulsion Laboratory (JPL) and tested on the full scale Space Shuttle Remote Manipulator at the Johnson Space Center (JSC) Manipulator Development Facility (MDF). The sensor system, integrated with a four-claw end effector, measures range error up to 6 inches, and pitch and yaw alignment errors within + or 15 deg., and displays error data on both graphic and numeric displays. The errors are referenced to the end effector control axes through appropriate data processing by a dedicated microcomputer acting on the sensor data in real time. Both display boxes contain a green lamp which indicates whether the combination of range, pitch and yaw errors will assure a successful grapple. More than 200 test runs were completed in early 1980 by three operators at JSC for grasping static and capturing slowly moving targets. The tests have indicated that the use of graphic/numeric displays of proximity sensor information improves precision control of grasp/capture range by more than a factor of two for both static and dynamic grapple conditions.

Bejczy, A. K.↗
NASA NTRS1994

The Dash Data Sharing System

The Data Sharing system (DASH) project was recently undertaken at NASA Johnson Space Center to introduce distributed data sharing into the Mission Control Center (MCC). Although the project focused on MCC communications, the solution is a general one. This paper describes that project. DASH allows applications to share data. It provides callable interfaces for applications wishing to export or import data. The system consists of several processes: publishers make exported data available to subscribers, which provide it to interested importing applications. A network registration service provides network location transparency, allowing the other processes to reside at arbitrary network locations. These processes act as intermediaries between external producing and consuming applications. DASH has been demonstrated in the MCC where it transmits Shuttle electrical bus data from the Bus Loss Smart System to the Configurable Realtime Analysis System. In addition, the Failure Impact and Procedure Analysis system used DASH to transmit Shuttle remote manipulator data from an expert system to a version of CRANS. DASH is currently being used to integrate a knowledge acquisition application and the CLIPS expert system shell.

Hasan, David A.↗
NASA NTRS1994

A Highly Redundant Robot System for Inspection

The work on the serpentine inspection system at JPL is described. The configuration of the inspection system consists of 20 DOF in total. In particular, the design and development of the serpentine micromanipulator end-effector tool which has 12 DOF is described. The inspection system is used for application in JPL's Remote Surface Inspection project and as a research tool in redundant manipulator control.

robot↗
NASA NTRS1973

Performance improvement in remote manipulation with time delay by means of a learning system.

A teleoperating system is presented that involves shared control between a human operator and a general-purpose computer-based learning machine. This setup features a trainable control network termed the autonomous control subsystem (ACS) which is able to observe the operator's control actions, learn the task at hand, and take appropriate control actions. A working ACS system is described that has been put in operation for the purpose of exploring the uses of a remote intelligence of this type. The expansion of the present system into a multifunctional learning machine capable of a greater degree of autonomy is also discussed.

Freedy, A.↗
NASA NTRS1987

Local Data Processing for a Robot Hand

Integrated-circuit microcomputers process signals among sensors, external controls, and end-effector motor. Multiple-microprocessor system within end effector of remote manipulator accepts data from sensors in end effector, commumnicates with external control system, and controls end-effector motor. External system includes central control computer (which interacts with operator) and display. Local dataprocessing system in end effector relieves external control system of some of its computational load and minimizes data communication load with external higher level controller.

Bejczy, A. K.↗
NASA NTRS1985

Remotely manipulated and autonomous robotic welding fabrication in space

The results of a NASA sponsored study, performed in order to establish the feasibility of remotely manipulated or unmanned welding fabrication systems for space construction, are presented. Possible space welding fabrication tasks and operational modes are classified and the capabilities and limitations of human operators and machines are outlined. Human performance in remote welding tasks was experimentally tested under the sensing and actuation constraints imposed by remote manipulation in outer space environments. Proposals for the development of space welding technology are made and necessary future R&D efforts are identified. The development of improved visual sensing strategies and computer encoding of the human welding engineering expertise are identified as essential, both for human operator assistance and for autonomous operation in all phases of welding fabrication. Novel uses of machine vision for the determination of the weld joint and bead geometry are proposed, and a prototype of a rule-based expert system is described for the interpretation of the visually detected weld features and defects.

Agapakis, J. E.↗
NASA NTRS1981

Research issues in implementing remote presence in teleoperator control

The concept of remote presence in telemanipulation is presented. A conceptual design of a prototype teleoperator system incorporating remote presence is described. The design is presented in functional terms, sensor, display, and control subsystem. An intermediate environment, in which the human operator is made to feel present, is explicated. The intermediate environment differs from the task environment due to the quantity and type of information presented to an operator and due to scaling factors protecting the operator from the hazards of the task environment. Potential benefits of remote presence systems, both for manipulation and for the study of human cognition and preception are discussed.

Corker, K.↗
NASA NTRS1993

Telerobot control system

This invention relates to an operator interface for controlling a telerobot to perform tasks in a poorly modeled environment and/or within unplanned scenarios. The telerobot control system includes a remote robot manipulator linked to an operator interface. The operator interface includes a setup terminal, simulation terminal, and execution terminal for the control of the graphics simulator and local robot actuator as well as the remote robot actuator. These terminals may be combined in a single terminal. Complex tasks are developed from sequential combinations of parameterized task primitives and recorded teleoperations, and are tested by execution on a graphics simulator and/or local robot actuator, together with adjustable time delays. The novel features of this invention include the shared and supervisory control of the remote robot manipulator via operator interface by pretested complex tasks sequences based on sequences of parameterized task primitives combined with further teleoperation and run-time binding of parameters based on task context.

Backes, Paul G.↗
NASA NTRS2014

Truss Assembly and Welding by Intelligent Precision Jigging Robots

This paper describes an Intelligent Precision Jigging Robot (IPJR) prototype that enables the precise alignment and welding of titanium space telescope optical benches. The IPJR, equipped with micron accuracy sensors and actuators, worked in tandem with a lower precision remote controlled manipulator. The combined system assembled and welded a 2 m truss from stock titanium components. The calibration of the IPJR, and the difference between the predicted and the truss dimensions as-built, identified additional sources of error that should be addressed in the next generation of IPJRs in 2D and 3D.

Komendera, Erik↗
NASA NTRS1990

Telerobotic on-orbit remote fluid resupply system

The development of a telerobotic on-orbit fluid resupply demonstration system is described. A fluid transfer demonstration system was developed which functionally simulates operations required to remotely transfer fluids (liquids or gases) from a servicing spacecraft to a receiving spacecraft through the use of telerobotic manipulations. The fluid system is representative of systems used by current or planned spacecraft and propulsion stages requiring on-orbit remote resupply. The system was integrated with an existing MSFC remotely controlled manipulator arm to mate/demate couplings for demonstration and evaluation of a complete remotely operated fluid transfer system.

Source record↗
NASA NTRS1992

The development of system components to provide proprioceptive and tactile information to the human for future telepresence systems

System components are presented that are being implemented to augment teleoperated systems by providing both force and tactile information to the human operator. The concept proposed is the control of a manipulator to perform tasks; i.e., flight line maintenance and repair of combat aircraft or satellites while under the control of a human operator at a remote location to maintain mission effectiveness in a hostile environment. The human would control the motion of the manipulator via a master system with information from the remote site being fed back by direct stimulation of the humans sensory mechanisms or by graphic interpretation of displays. We are interested in providing the operator feedback of position, force, auditory, vision, and tactile information to aide in the human's cognitive ability to control the manipulator. This sensory information from the remote site would then be presented to the operator in such a manner as to enhance his performance while providing him a sense of being present at the remote location, this is known as telepresence. Also discussed is the research done by the Human Sensory Feedback (HSF) facility at the Armstrong Laboratory to provide tactile and proprioceptive feedback to the operator. The system components of this system includes tactile sensor and stimulators, dexterous robotic hands, and the control of positioning and operating industrial robots with exoskeletal mechanisms.

Wright, Ammon K.↗
NASA NTRS1987

Traction-drive, seven-degree-of-freedom telerobot arm: A concept for manipulaton in space

As man seeks to expand his dominion into new environments, the demand increases for machines that perform useful functions in remote locations. This new concept for manipulation in space is based on knowledge and experience gained from manipulator systems developed to meet the needs of remote nuclear applications. It merges the best characteristics of teleoperation and robotic technologies. The design goals for the telerobot, a mechanical description, and technology areas that must be addressed for successful implementation are presented and discussed. The concept incorporates mechanical traction drives, redundant kinematics, and modular arm subelements to provide a backlash-free manipulator capable of obstacle avoidance.

Kuban, D. P.↗
NASA NTRS1979

Operator Station Design System - A computer aided design approach to work station layout

The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

Lewis, J. L.↗
NASA NTRS1972

Teleoperators - A growth industry.

Teleoperators (remote operators), equipped with TV systems, manipulators, and highly mobile vehicles, can extend man's manipulative and sensory capabilities into distant or hazadous environments. It is shown how teleoperator technology will lead to autonomous robots, and from them and special purpose teleoperators, to a completely new industrial system. Various applications are described, and it is pointed out that teleoperators do not replace workers.

Johnsen, E. G.↗
NASA NTRS1973

Recent NASA aerospace medicine technology developments

Areas of life science are being studied to obtain baseline data, strategies, and technology to permit life research in the space environment. The reactions of the cardiovascular system to prolonged weightlessness are also being investigated. Particle deposition in the human lung, independent respiratory support system, food technology, and remotely controlled manipulators are mentioned briefly.

Jones, W. L.↗
NASA NTRS1976

Selective image enhancement

Digital technique for television systems can be used with remote manipulators. Algorithm is used to divide image into N-by-N picture elements which may be individually enhanced. Enhancement may be controlled with joystick. Similar arrangement simplifies remote manipulator operation.

Gonzalez, R. C.↗
NASA NTRS1979

Study of modeling and evaluation of remote manipulation tasks with force feedback

The use of time and motion study methods to evaluate force feedback in remote manipulation tasks are described. Several systems of time measurement derived for industrial workers were studied and adapted for manipulator use. A task board incorporating a set of basic motions was designed and built. Results obtained from two subjects in three manipulation situations for each are reported: a force-reflective manipulator, a unilateral manipulator, and the unaided human hand. The results indicate that: (1) a time-and-motion study techniques are applicable to manipulation; and that (2) force feedback facilitates some motions (notably fitting), but not others (such as positioning).

Hill, J. W.↗