Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLAR MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Probabilistic modeling of solar power systems

The author presents a probabilistic approach based on Markov chain theory to model stand-alone photovoltaic power systems and predict their long-term service performance. The major advantage of this approach is that it allows designers and developers of these systems to analyze the system performance as well as the battery subsystem performance in the long run and determine the system design requirements that meet a specified service performance level. The methodology presented is illustrated by using data for a radio repeater system for the Boston, Massachusetts, location.

Safie, Fayssal M.↗

Insensitivity of solar p-mode frequencies to changes in the helium abundance

P-mode oscillation spectra (l = 0-4; n = 12-30) were calculated for three solar models with helium mass fractions Y = 0.230, 0.235, and 0.240. The solar models were tuned to have the Sun's radius and luminosity by adjusting both the age and the ratio of the mixing length to pressure scale height parameter. The models were identically constrained in all other respects. A 4 percent change in the mass fraction of helium produces less than a 0.1 percent change in the frequencies of the low degree p-modes. This result implies that it will be very difficult to determine the helium abundance of the sun directly from the p-mode oscillation spectrum since the frequencies of the modes are relatively insensitive to changes in the helium abundance.

Guenther, D. B.↗

Hydrostatic and dynamic models of solar coronal holes

A description is presented of a sequence of one-dimensional fluid flow models of the transition zone and the inner corona. A hydrostatic model atmosphere in reasonable agreement with observations of closed, large-scale coronal structures found in the quiet sun is considered and various physical effects are introduced, one at a time, observing the response of the model. As a result of the investigations, a model is developed of the plasma flow in a coronal hole. It is shown that the data severely circumscribe the allowable range of possible models.

Rosner, R.↗

A two-fluid solar wind model with Alfven waves - Parameter study and application to observations

The effects of Alfven waves from the inner corona on the solar wind density profile, flow velocity and on the random motion of protons are studied. Different base densities, temperatures, and wave velocity amplitudes, as well as different flow geometries, are considered. The model calculations are compared to simultaneous observations of the electron density profile and the resonantly scattered Lyman alpha line. Present observations, out to 4 solar radii, can be used to place limits on the coronal base density and temperature, and put an upper limit on the wave amplitude. It is pointed out that future observations of the electron density and the Lyman alpha line, out to larger heliocentric distances, and of lines from heavier elements, should be used to place more stringent constraints on the amplitudes of MHD waves in the corona.

Esser, R.↗

Computational analysis of metamaterial–aluminum–silicon solar cell model

In this paper, the optical parameters of an improved waveguide structure for a more efficient silicon solar cell are studied. Despite its favorable electronic, physical, and chemical properties, silicon remains a poor absorber of light. The optical losses due to the reflection at the air/glass interface of the cell and the transmission at its back are other factors, which limit the cell conversion efficiency. Consequently, several mechanisms for light trapping capable to increase the collection of the incident photons as electrical current and to decrease the transmission loss, have been developed. In this context, we propose a multilayer waveguide structure in which the sunlight is guided by a metamaterial layer and the transmission loss is eliminated by an aluminum back reflector. The reflection and transmission coefficients are derived by using the Generalized Transfer Matrix Method. The application of the law of conservation of energy allowed the determination of the absorption coefficient. These optical parameters are examined for several angles of incidence for s-polarized light, p-polarized light and unpolarized light. Simulation results show a significant reduction of reflection and a complete suppression of transmission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Introduction to stellar atmospheres and interiors

Stellar atmospheres are examined, giving attention to the transfer of radiation, the physical properties of gases, model atmospheres, and questions of line absorption in stellar atmospheres. Observational data are considered together with the equations for the stellar interior and aspects of stellar evolution. The calculation of model atmospheres and interiors is also discussed, taking into account numerical integration, a model solar atmosphere, and model stellar interiors.

Novotny, E.↗

Forbidden Ca 2 in the sun unmasked by way of Venus

Eleven high-dispersion spectra of Venus, taken with blue Doppler shifts have permitted the unmasking of the 7323.88A forbidden line of Ca II from terrestrial absorption. An equivalent width is obtained of 7.4 + or - 0.4mA for this line in integrated sunlight. Our value of W sub lambda is smaller than previous values and much more accurate. The HSRA solar model gives a solar calcium abundance of A sub Ca = 6.21.

Schorn, R. A.↗

The electronic systems for the Gamma Ray Experiment for the Solar Maximum Mission

The Gamma Ray Experiment (GRE) is one of the seven instruments on the Solar Maximum Mission. The scientific objective of the GRE is to study solar gamma ray emissions expected during, and, according to some solar models, prior to solar flares. The instrument consists of a detector assembly and a remote electronic assembly. The latter includes redundant low-voltage power supplies and the remaining command, data handling, and ancillary electronic subsystems of the instrument. The electronic systems and subsystems of the instrument are described in some detail.

Staples, M.↗

Ka-band and X-band observations of the solar corona acquired during the Cassini 2001 superior conjunction

Simultaneous dual-frequency Ka-band (32 GHz) and X-band (8.4 GHz) carrier signal data have been acquired during the superior conjunction of the Cassini spacecraft June 2001, using the NASA Deep Space Network's facilities located in Goldstone, California. The solar elongation angle of the observations varied from -4.1 degrees (-16 solar radii) to -0.6 degrees (-2.3 solar radii). The observed coronal and solar effects on the signals include spectral broadening, amplitude scintillation, phase scintillation, and increased noise. The measurements were generally consistent with existing solar models, except during solar transient events when the signatures of the measurements were observed to increase significantly above the quiet background levels. This is the second solar conjunction of Cassini for which simultaneous X/Ka data were acquired. Both solar conjunctions, conducted in May 2000 and June 2001, occurred near the peak of the current 11 year solar cycle.

propagation scintillation spectral broadening↗

Spatiotemporal Downscaling Model for Solar Irradiance Forecast Using Nearest-Neighbor Random Forest and Gaussian Process

Accurate solar photovoltaic (PV) capacity estimation requires high-resolution, site-specific solar irradiance data to account for localized variability. However, global datasets, such as the National Solar Radiation Database (NSRDB), provide regional averages that fail to capture the fine-scale fluctuations critical for large-scale grid integration. This limitation is particularly relevant in the context of increasing distributed energy resources (DERs) penetration, such as rooftop PV. Additionally, it is critical to the implementation of the U.S. Federal Energy Regulatory Commission (FERC) Order 2222, which facilitates DER participation in U.S. bulk power markets. To address this challenge, this study evaluates Nearest-Neighbor Random Forest (NNRF) and Nearest-Neighbor Gaussian Process (NNGP) models for spatiotemporal downscaling of global solar irradiance data. By leveraging historical irradiance and meteorological data, these models incorporate spatial, temporal, and feature-based correlations to enhance local irradiance predictions. The NNRF model, a machine-learning approach, prioritizes computational efficiency and predictive accuracy, while the NNGP model offers a level of interpretability and prediction uncertainty by numerically quantifying correlations and dependencies in the data. Model validation was conducted using day-ahead predictions. The results showed that the average Goodness of Fit (GoF) of the NNRF model of 90.61% across all eight sites outperformed the GoF of the NNGP of 85.88%. Additionally, the computational speed of NNRF was 2.5 times faster than the NNGP. Finally, the NNGP displayed polynomial scaling while the NNRF scaled linearly with increasing number of nearest neighbors. Additional validation of the model on five sites in Puerto Rico further confirmed the superiority of the NNRF model over the NNGP model. These findings highlight the robustness and computational efficiency of NNRF for large-scale solar irradiance downscaling, making it a strong candidate for improving PV capacity estimation and real-time electricity market integration for DERs.

Asiedu, Shadrack (ORCID:0009000646004826)↗

Self-Consistent and Time-Dependent Solar Wind Models

We describe the first results from a self-consistent study of Alfven waves for the time-dependent, single-fluid magnetohydrodynamic (MHD) solar wind equations, using a modified version of the ZEUS MHD code. The wind models we examine are radially symmetrical and magnetized; the initial outflow is described by the standard Parker wind solution. Our study focuses on the effects of Alfven waves on the outflow and is based on solving the full set of the ideal nonlinear MHD equations. In contrast to previous studies, no assumptions regarding wave linearity, wave damping, and wave-flow interaction are made; thus, the models naturally account for the back-reaction of the wind on the waves, as well as for the nonlinear interaction between different types of MHD waves. Our results clearly demonstrate when momentum deposition by Alfven waves in the solar wind can be sufficient to explain the origin of fast streams in solar coronal holes; we discuss the range of wave amplitudes required to obtained such fast stream solutions.

Ong, K. K.↗

ON THE CONSERVATION OF CROSS HELICITY AND WAVE ACTION IN SOLAR-WIND MODELS WITH NON-WKB ALFVÉN WAVE REFLECTION

The interaction between Alfvén-wave turbulence and the background solar wind affects the cross helicity (∫d{sup 3}x v⋅B) in two ways. Non-WKB reflection converts outward-propagating Alfvén waves into inward-propagating Alfvén waves and vice versa, and the turbulence transfers momentum to the background flow. When both effects are accounted for, the total cross helicity is conserved. In the special case that the background density and flow speed are independent of time, the equations of cross-helicity conservation and total-energy conservation can be combined to recover a well-known equation derived by Heinemann and Olbert that has been interpreted as a non-WKB generalization of wave-action conservation. This latter equation (in contrast to cross-helicity and energy conservation) does not hold when the background varies in time.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of Diffuse and Ground-Reflected Irradiance on the Spectral Modeling of Solar Reference Cells

Thermal Energy Storage (TES) is a key component for solar thermal applications to bridge the gap between the demand for thermal energy and the supply of solar energy, whose availability depends on the time of day and season. Thus, cost-effective packed-bed thermal containers filled with a solid storage medium have been proposed for high-temperature sensible heat storage as materials are abundant and relatively cheap. Thus, it is necessary to investigate their performance and temperature profiles during the charge-discharge cycle. Several models are available for this purpose. Typically, the more detailed a model, the greater the computational effort required to solve it, and hence a time-efficient model is needed to prevent excessively long computation times for long-term analysis. At the more basic level, the common Hughes E-NTU model and the less realistic simplified Infinite-NTU model are very important for their less time and computational effort. In this paper, the appropriateness of employing the Infinite-NTU model was evaluated to investigate the performance of a typical and scalable rock-bed TES as a case study. The results presented provide a methodology to quickly test the validity of the model and predict the temperature profile for the case under study. Accordingly, such simple charge-discharge cycle thermal performance predictions are important to plan, design, and rapidly deploy a reliable and economical solar thermal system for the supply of valuable heat to high-temperature demanding applications of power generation and industrial processes as part of a rapid shift towards non-polluting renewable energy. Keywords: Solar Thermal, TES, Packed-bed, NTU model, Temperature profile

PV modeling↗

Estimating Surface Solar Irradiance Using Meteosat-8 Satellite for India and Surrounding Regions (2017-2019)

Using the Physical Solar Model, Version 3 (PSM V3), the National Renewable Energy Laboratory—in collaboration with the University of Wisconsin, the National Oceanic and Atmospheric Administration, and Solar Consulting Services—produced modeled surface solar irradiance based on Meteosat-8 satellite cloud information. PSM V3 implements a physics-based radiative transfer approach to model surface solar irradiance using cloud properties processed from raw satellite data and ancillary data such as aerosol optical depth and precipitable water vapor from the Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2). Further, the modeled surface solar irradiance was validated using 10 high-quality ground measurement data from the Baseline Surface Radiation Network. The modeled data showed good correlation with the ground measurement, and the overall uncertainty is less than 35% for all validation locations. Because of the satellite viewing geometry, the Indian and European locations demonstrated higher uncertainties than the African locations, where the Meteosat-8 satellite has a more nadir viewing geometry. Further, instruction on how to access the data is provided.

14 SOLAR ENERGY↗

Gallium arsenide (GaAs) solar cell modeling studies

Various models were constructed which will allow for the variation of system components. Computer studies were then performed using the models constructed in order to study the effects of various system changes. In particular, GaAs and Si flat plate solar power arrays were studied and compared. Series and shunt resistance models were constructed. Models for the chemical kinetics of the annealing process were prepared. For all models constructed, various parametric studies were performed.

Heinbockel, J. H.↗

Development, testing, and certification of the Northrup, Inc., ML series concentrating solar collector model NSC-01-0732

A summary is presented of the additional development work on the existing ML Series concentrating solar collector for use with solar heating and cooling systems. The report discusses the intended use of the final report, describes the development hardware, lists deliverable end items, deals with problems encountered during fabrication and testing, and includes certification statements of performance. This report shows that the products developed are marketable and suitable for public use.

Parker, J. C.↗