Search NASA⌕ Search

SEARCH · Search NASA

Results for “STOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Optimal ride control for the Twin Otter, STOL aircraft

An aircraft with low wing loading, such as the deHavilland, Twin Otter, exhibits a relatively large acceleration sensitivity to wind gusts. These undesirable aircraft motions can be reduced using an automatic ride control system. In this paper, the techniques of quadratic optimal control theory are utilized to investigate the capabilities of such a ride control system. The effects of the wind gusts on the aircraft can be modeled by a vector stochastic process containing seven states. The impact of this disturbance model on the optimal control system structure is assessed and comparison is made to a system without gust feedback.

Holley, W. E.↗
NASA NTRS1977

Evaluation of STOL navigation avionics

Research projects, including work on a vector magnetometer for aircraft attitude measurement, are summarized. The earth's electric field phenomena was investigated in its application to aircraft control and navigation. Research on electronic aircraft cabin noise suppression is reviewed and strapdown inertial reference unit technical support is outlined.

Dunn, W. R., Jr.↗
NASA NTRS1978

Study of a safety margin system for powered-lift STOL aircraft

A study was conducted to explore the feasibility of a safety margin system for powered-lift aircraft which require a backside piloting technique. The objective of the safety margin system was to present multiple safety margin criteria as a single variable which could be tracked manually or automatically and which could be monitored for the purpose of deriving safety margin status. The study involved a pilot-in-the-loop analysis of several safety margin system concepts and a simulation experiment to evaluate those concepts which showed promise of providing a good solution. A system was ultimately configured which offered reasonable compromises in controllability, status information content, and the ability to regulate the safety margin at some expense of the allowable low speed flight path envelope.

Heffley, R. K.↗
NASA NTRS1978

Effects of inlet airframe integration on the inlet of an upper surface blowing four-engine STOL aircraft

Inlet and nacelle static pressures were measured on a 0.55-scale model of the Quiet Short-Haul Research Airplane (QSRA) in the Ames Research Center's 40- by 80-Foot Wind Tunnel. This model is powered by four JT-15D engines located above the wing with closely spaced adjacent inlets. A fifth JT-15D engine in the fuselage provides boundary-layer control air. Each inlet was instrumented with four to eight rows of axial pressure taps located between X/R approximately plus or minus 1. The tests simulated a broad range of aircraft operating conditions, including engine-out, with lift coefficients from 0.8 to 10.0. Results indicate that the inlets perform well under most operating conditions with little interaction between inlets when the aircraft is moving. Potential problem areas identified are high sideslip angle during approach and an interaction effect between adjacent inlets with high mass flows in static conditions.

Shovlin, M. D.↗
NASA NTRS1979

Experimental study of acoustic loads on an upper-surface-blown STOL airplane configuration

Fluctuating pressure levels were measured on the flap and fuselage of an upper-surface-blown jet-flap airplane configuration in a wind tunnel. The model tested had turbofan engines with a bypass ratio of 3 and a thrust rating of 10 kN. Rectangular nozzles were mounted flush with the upper surface at 35 percent of the wing chord. Test parameters were flap deflection angle, jet impingement angle, angle of attack, free-stream velocity, spanwise location of the engine, and jet dynamic pressure. Load levels were high throughout the jet impingement region, with the highest levels (about 159 dB) occurring on the fuselage and near the knee of the flap. The magnitude of the forward-velocity effect appeared to depend upon the ratio of free-stream and jet velocities. Good agreement was obtained between fluctuating pressure spectra measured at jet dynamic pressures of 7 and 22 kPa when the spectra were scaled by nondimensional functions of dynamic pressure, velocity, and the empirical relationship between dynamic pressure and overall fluctuating pressure level.

Willis, C. M.↗
NASA NTRS1980

A comparison of flight and simulation data for three automatic landing system control laws for the Augmentor wing jet STOL research airplane

Automatic flare and decrab control laws for conventional takeoff and landing aircraft were adapted to the unique requirements of the powered lift short takeoff and landing airplane. Three longitudinal autoland control laws were developed. Direct lift and direct drag control were used in the longitudinal axis. A fast time simulation was used for the control law synthesis, with emphasis on stochastic performance prediction and evaluation. Good correlation with flight test results was obtained.

Feinreich, B.↗
NASA NTRS1980

An analysis of thrust-induced effects on the longitudinal aerodynamics of STOL fighter configurations

An analysis of the thrust-induced longitudinal aerodynamic characteristics of three fighter-type configurations is presented. A brief discussion of the take-off and landing requirements for the next generation fighter aircraft leads to the conclusion that advances in lift coefficient and thrust reversing will be required to allow short-field operation. Typical power-on longitudinal aerodynamic data for the three fighter configurations, indicating different approaches to meeting the high-lift coefficient requirement, are discussed. Thrust reversing is not addressed in this paper. The power-on data are analyzed to determine what power effects are present, that is, direct thrust, boundary-layer control, vortex flows, or supercirculation. The results of the analysis indicate, for the configurations studied, that induced effects are small compared to direct thrust and that boundary-layer control, rather than leading-edge vortex flows or supercirculation, is the only significant thrust-induced effect.

Paulson, J. W., Jr.↗
NASA NTRS1980

Flight evaluation of stabilization and command augmentation system concepts and cockpit displays during approach and landing of powered-lift STOL aircraft

A flight research program was conducted to assess the effectiveness of manual control concepts and various cockpit displays in improving altitude (pitch, roll, and yaw) and longitudinal path control during short takeoff aircraft approaches and landings. Satisfactory flying qualities were demonstrared to minimum decision heights of 30 m (100 ft) for selected stabilization and command augmentation systems and flight director combinations. Precise landings at low touchdown sink rates were achieved with a gentle flare maneuver.

Franklin, J. A.↗
NASA NTRS1978

Analytical study of STOL Aircraft in ground effect. Part 1: Nonplanar, nonlinear wing/jet lifting surface method

A nonlinear, nonplanar three dimensional jet flap analysis, applicable to the ground effect problem, is presented. Lifting surface methodology is developed for a wing with arbitrary planform operating in an inviscid and incompressible fluid. The classical, infintely thin jet flap model is employed to simulate power induced effects. An iterative solution procedure is applied within the analysis to successively approximate the jet shape until a converged solution is obtained which closely satisfies jet and wing boundary conditions. Solution characteristics of the method are discussed and example results are presented for unpowered, basic powered and complex powered configurations. Comparisons between predictions of the present method and experimental measurements indicate that the improvement of the jet with the ground plane is important in the analyses of powered lift systems operating in ground proximity. Further development of the method is suggested in the areas of improved solution convergence, more realistic modeling of jet impingement and calculation efficiency enhancements.

Shollenberger, C. A.↗
NASA NTRS1978

Analytical study of STOL Aircraft in ground effect. Part 2: Nonplanar, nonlinear method applicable to three dimensional jets of finite thickness

The ability of the potential flow analysis (POTFAN) to predict the influence of ground proximity on lift systems is examined. A two dimensional study employing vortex lattice methodology provides confidence that ground effect phenomenon can be predicted using discrete singularity representation. Two dimensional quasi-steady ascent and descent behavior determined provides guidance in interpreting three dimensional results. Steady and quasi-steady ground effect aerodynamic characteristics predicted by POTFAN are presented for several basic unpowered configurations. POTFAN results are compared with experimental data and results of other analytical methods. Modification of POTFAN to incorporate multienergy flow analysis is discussed. General aspects of thick jet models are examined to provide a basic for extending POTFAN's scope to include analysis of propulsive lift interactions.

Shollenberger, C. A.↗
NASA NTRS1981

Design of a fuel-efficient guidance system for a STOL aircraft

In the predictive mode, the system synthesizes a horizontal path from an initial aircraft position and heading to a desired final position and heading and then synthesizes a fuel-efficient speed-altitude profile along the path. In the track mode, the synthesized trajectory is reconstructed and tracked automatically. An analytical basis for the design of the system is presented and a description of the airborne computer implementation is given. A detailed discussion of the software, which should be helpful to those who use the actual software developed for these tests, is also provided.

Mclean, J. D.↗
NASA NTRS1981

Classical and modern control design of a speed-hold system for a STOL airplane

A speed-hold system for an experimental short takeoff and landing jet airplane has been designed using both classical root-locus and modern optimal control synthesis techniques. The purpose of the speed-hold system is to maintain airspeed during final approach in the presence of wind shears, gusts, engine failures, and pilot control inputs. Designs were based on using airspeed as a single measurement and two symmetrically deployed upper surface blown flaps as a single control. An optimal control law feeding back all the states and the integral of airspeed through constant gains provided superior performance in terms of speed tracking and control surface activity. However, when a constant-gain Kalman filter was inserted to estimate the states using only the measurement of airspeed, the performance of the optimal control law was reduced to the same as that of a much simpler classical proportional-path plus integral-path control law. To improve the performance of the optimal control law, additional measurements would be required.

Blight, J. D.↗
NASA NTRS1981

Static noise tests on modified augmentor wing jet STOL research aircraft

Noise measurements were made to determine if recent modifications made to the bifurcated jetpipe to increase engine thrust had at the same time reduced the noise level. The noise field was measured by a 6-microphone array positioned on a 30.5m (100 ft) sideline between 90 and 150 degrees from the left engine inlet. Noise levels were recorded at three flap angles over a range of engine thrust settings from flight idle to emergency power and plotted in one-third octave band spectra. Little attenuation was observed at maximum power, but significant attenuation was achieved at approach and cruise power levels.

Cook, G. R.↗
NASA NTRS1981

Powered-lift STOL aircraft shipboard operations - A comparison of simulation, land-based and sea trial results for the QSRA

A moving base carrier landing flight simulation using NASA's Quiet Short-Haul Research Aircraft (QSRA) was conducted during the design and fabrication of the QSRA. After completing its initial flight testing, the QSRA flew simulated carrier landings on land, followed by actual carrier landings at sea. This paper compares the simulated flight characteristics used in the flight simulation (using an aircraft math model based on wind tunnel data) with the aircraft flight characteristics obtained from flight test data. This paper also compares the results of the QSRA flight simulation carrier landings, the land based simulated carrier landings, and the actual carrier landings.

Stevens, V. C.↗
NASA NTRS1981

Design features of a sea-based multipurpose V/STOL, STOVL, and STOL aircraft in a support role for the U.S. Navy

Design features and certain performance data are outlined for three different basic airframes. The heart of the design is a powered lift system known formally as the Advanced Blown Lift Enhancement system. A summary of the results of both powered-model wind tunnel tests of the airplane and of static tests of the vectoring-nozzle system is given to indicate the rather high degree of thrust vectoring efficiency and powered lift enhancement attained.

Bradfield, G. W.↗