Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Lifetime”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tritium Aging Effects on Fracture Toughness of Stainless Steel Weldments

The long-term embrittlement effects of tritium and decay helium on the structural properties of stainless steels have been studied for years at Savannah River to provide required data for establishing safe operating conditions and lifetimes of pressure vessels used to contain tritium gas. In this study, the fracture toughness properties of the longest-aged tritium-precharged stainless-steel base metals and weldments tested at Savannah River were measured and compared to earlier results. The fracture toughness values were the lowest recorded here for tritium-exposed stainless steel. As-forged and as-welded specimens were thermally precharging with tritium gas at 34.5 MPa and 623 K, then aged for up to 17 years to buildin decay helium prior to testing. ASTM J-Integral fracture mechanics analyses, transmission electron microscopy (TEM), and small angle neutron scattering (SANS) examinations were conducted to characterize the effects of tritium and its radioactive decay product, helium-3. Results show that the fracture toughness values were reduced to less than 2-4% of the as-forged values for specimens with more than 1300 appm helium from tritium decay. The trend of decreasing fracture toughness values with increasing helium content was consistent with earlier observations, and the data show that Type 304L stainless steel is more resistant to tritium-induced cracking than Type 21-6-9 stainless at similar decay helium levels. The fracture toughness properties of long-aged weldments were also affected, but the reductions were not as severe over time because weldments did not retain as much tritium as did the base metals. TEM observations were used to characterize the effects of decay helium bubbles on the deformation substructures, but nanometer-sized helium bubbles were not easily resolved because of high dislocation densities within the forged microstructures. SANS results are presented that suggest the technique can provide information on decay helium bubble size, spacing, and distribution in these steels.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Disentangling Pauli Blocking of Atomic Decay from Cooperative Radiation and Atomic Motion in a 2D Fermi Gas

The observation of Pauli blocking of atomic spontaneous decay via direct measurements of the atomic population requires the use of long-lived atomic gases where quantum statistics, atom recoil, and cooperative radiative processes are all relevant. In this work, we develop a theoretical framework capable of simultaneously accounting for all these effects in the many-body quantum degenerate regime. We apply it to atoms in a single 2D pancake or arrays of pancakes featuring an effective Λ level structure (one excited and two degenerate ground states). We identify a parameter window in which a factor of 2 extension in the atomic lifetime clearly attributable to Pauli blocking should be experimentally observable in deeply degenerate gases with ~10 3 atoms. We experimentally observe a suppressed excited-state decay rate, fully consistent with the theory prediction of an enhanced excited-state lifetime, on the 1 S 0 – 3 P 1 transition in 87 Sr atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Photochemical CO 2 Reduction Using Rhenium(I) Tricarbonyl Complexes with Bipyridyl-Type Ligands with and without Second Coordination Sphere Effects

In this study, the effect of phenyl, phenol, aniline, amino, and CF 3 substituents of the 2,2'-bipyridine ligand in fac-ReCl(L)(CO) 3 (L=2,2'-bipyridine derivative) catalysts on photochemical CO 2 reduction in dimethylacetamide is examined, in order to understand the structure-function relationships and to compare the catalytic activities with the previously published electrochemical results. All complexes including ReCl(bpy)(CO) 3 have similar excited-state lifetimes and emission spectra, but complex 1 with the Ph-NH 2 moiety exhibits a significantly larger molar absorption coefficient for its metal-to-ligand charge transfer (MLCT) band. All complexes we tested produce CO with only a negligible amount of H 2 and formate in self-sensitized systems in the presence of triethanolamine (TEOA) and in some cases, BIH (1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]-imidazole). The presence of the Ph-NH 2 moiety (complex 1) has a beneficial effect on both electrochemical and photochemical activity, allowing a turnover number (TON) of 32 and 120 for photochemical CO production (without and with BIH, respectively). In the case of the Ph-OH group in the second coordination sphere (complexes 4 and 6), these complexes are active for photochemical CO 2 reduction, despite the formation of a stable 6-coordinate Re-OPh intermediate via reductive deprotonation as previously observed under electrochemical conditions. Overall, BIH accelerates the rate of formation of the one-electron reduced species (OERS) of the Re catalysts and allows higher turnover frequency (TOF) and TON for CO formation. The X-ray structures of complexes 1 and 4 were determined to have distorted octahedral Re centres, and show π-π stacking interactions with neighboring molecules as well as intramolecular hydrogen bonds to the internal chloride ligands. The unusually high absorptivity of the MLCT absorption of complex 1 has been explained by TD-DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Disorder Dynamics in Battery Nanoparticles During Phase Transitions Revealed by Operando Single-Particle Diffraction

Structural and ion-ordering phase transitions limit the viability of sodium-ion intercalation materials in grid scale battery storage by reducing their lifetime. However, the combination of phenomena in nanoparticulate electrodes creates complex behavior that is difficult to investigate, especially on the single-nanoparticle scale under operating conditions. In this work, operando single-particle X-ray diffraction (oSP-XRD) is used to observe single-particle rotation, interlayer spacing, and layer misorientation in a functional sodium-ion battery. oSP-XRD is applied to Na 2/3 [Ni 1/3 Mn 2/3 ]O 2 , an archetypal P2-type sodium-ion-positive electrode material with the notorious P2-O2 phase transition induced by sodium (de)intercalation. Here, it is found that during sodium extraction, the misorientation of crystalline layers inside individual particles increases before the layers suddenly align just prior to the P2-O2 transition. The increase in the long-range order coincides with an additional voltage plateau signifying a phase transition prior to the P2-O2 transition. To explain the layer alignment, a model for the phase evolution is proposed that includes a transition from localized to correlated Jahn-Teller distortions. The model is anticipated to guide further characterization and engineering of sodium-ion intercalation materials with P2-O2 type transitions. oSP-XRD, therefore, opens a powerful avenue for revealing complex phase behavior in heterogeneous nanoparticulate systems.

25 ENERGY STORAGE↗
DOE OSTI2020

Global description of $β$ – decay with the axially deformed Skyrme finite-amplitude method: Extension to odd-mass and odd-odd nuclei

Here we use the finite-amplitude method (FAM), an efficient implementation of the quasiparticle random phase approximation, to compute $β$-decay rates with Skyrme energy-density functionals for 3983 nuclei, essentially all the medium-mass and heavy isotopes on the neutron-rich side of stability. We employ an extension of the FAM that treats odd-mass and odd-odd nuclear ground states in the equal filling approximation. Our rates are in reasonable agreement both with experimental data where available and with rates from other global calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Evaluating Radiation Impact on Transmon Qubits in Above and Underground Facilities

Superconducting qubits can be sensitive to abrupt energy deposits caused by cosmic rays and ambient radioactivity. Previous studies have focused on understanding possible correlated effects over time and distance due to cosmic rays. In this study, for the first time, we directly compare the response of a transmon qubit measured initially at the Fermilab SQMS above-ground facilities and then at the deep underground Gran Sasso Laboratory (INFN-LNGS, Italy). We observe same average qubit lifetime T$_1$ of roughly 80 microseconds at above and underground facilities. We then apply a fast decay detection protocol and investigate the time structure, sensitivity and relative rates of triggered events due to radiation versus intrinsic noise, comparing above and underground performance of several high-coherence qubits. Using gamma sources of variable activity we calibrate the response of the qubit to different levels of radiation in an environment with minimal background radiation. Results indicate that qubits respond to a strong gamma source and it is possible to detect particle impacts. However, when comparing above and underground results, we do not observe a difference in radiation induced-like events for these sapphire and niobium-based transmon qubits. We conclude that the majority of these events are not radiation related and to be attributed to other noise sources which by far dominate single qubit errors in modern transmon qubits.

Roy, Tanay↗
DOE OSTI2024

Final Technical Report

This research project aims to understand the structure and properties of hidden intermediates in amorphous oxides grown by atomic layer deposition (ALD), and apply what is learned to achieve predictive phase and property control in the ALD synthesis of amorphous oxide thin films. The one-year renewal is to further this understanding to understand how amorphous TiO2 thin films by ALD turn into crystalline phase in correlation to the presence of medium range ordering (MRO) and other impurities. This fundamental study is expected to produce a predictive synthesis science for amorphous thin films with substantially improved uniformity and thereby achieve higher stability as a new surface coating strategy used for electrochemical catalysis. In this final technical report, we summarize the key achievements in this project to meet the research goals. This includes (1) a new approach to achieve homogeneous nanometer-scale amorphous coating leading to a new record of lifetime for photoelectrochemical hydrogen fuel generation; (2) A advancement in scanning transmission electron microcopy (STEM) that led to new understanding of intermediate phase in amorphous films; and (3) a computational model for understanding the local structure ordering in amorphous TiO2 films. In addition, this project also yielded relevant technical innovations including a development of bioresorbable zinc primary batteries that can self-degrade after depletion; and a ferroelectric membrane that provides active dendrites suppression to substantially improve the lifetime of rechargeable batteries. Collaboration with Lam Research also yield a new understanding of how built-in strain influences the amorphous films’ quality, bringing direct impacts to semiconductor manufacturing industry.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coupling, lifetimes, and “strong coupling” maps for single molecules at plasmonic interfaces

The interaction between excited states of a molecule and excited states of a metal nanostructure (e.g., plasmons) leads to hybrid states with modified optical properties. When plasmon resonance is swept through molecular transition frequency, an avoided crossing may be observed, which is often regarded as a signature of strong coupling between plasmons and molecules. Such strong coupling is expected to be realized when 2|$\langle$U$\rangle$|/ℏΓ > 1, where $\langle$U$\rangle$ and Γ are the molecule–plasmon coupling and the spectral width of the optical transition, respectively. Because both $\langle$U$\rangle$ and Γ strongly increase with decreasing distance between a molecule and a plasmonic structure, it is not obvious that this condition can be satisfied for any molecule–metal surface distance. Here, in this work, we investigate the behavior of $\langle$U$\rangle$ and Γ for several geometries. Surprisingly, we find that if the only contributions to Γ are lifetime broadenings associated with the radiative and nonradiative relaxation of a single molecular vibronic transition, including effects on molecular radiative and nonradiative lifetimes induced by the metal, the criterion 2|$\langle$U$\rangle$|/ℏΓ > 1 is easily satisfied by many configurations irrespective of the metal–molecule distance. This implies that the Rabi splitting can be observed in such structures if other sources of broadening are suppressed. Additionally, when the molecule–metal surface distance is varied keeping all other molecular and metal parameters constant, this behavior is mitigated due to the spectral shift associated with the same molecule–plasmon interaction, making the observation of Rabi splitting more challenging.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Perovskite Solar Cells with Enhanced Fill Factors Using Polymer-Capped Solvent Annealing

Despite huge improvements in power conversion efficiencies of perovskite solar cells, the technology is still limited by fill factors at around 80%. In this work, we report perovskite solar cells having exceptionally high fill factors of 85% and enhanced open-circuit voltage without sacrificing short-circuit current through a polymer-capped solvent-annealing process assisted by a hot air blower. Additionally, during the solvent-annealing, the perovskite surface flattens and the perovskite grains agglomerate into micrometer-sized clusters having enlarged α-phase crystallites, while the δ-phase simultaneously disappears. The optimized structure reduces energetic disorder and trap-assisted recombination in the perovskite layer, resulting in an enhanced efficiency from 18.2% to 19.8% and improved device lifetime. Our results provide a pathway to increase the device efficiency and stability of perovskite solar cells, and have the potential to stimulate research on scalable poly-crystal perovskite layer fabrication in optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Aging of Self-Assembled Lead Halide Perovskite Nanocrystal Superlattices: Effects on Photoluminescence and Energy Transfer

Excitonic coupling, electronic coupling, and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a red-shifted collective emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by studying CsPbBr 3 nanocrystal superlattices over time with room-temperature and cryogenic micro-photoluminescence spectroscopy, X-ray diffraction, and electron microscopy. It is shown that a gradual contraction of the superlattices and subsequent coalescence of the nanocrystals occurs over several days of keeping such structures under vacuum. As a result, a narrow, low-energy emission peak is observed at 4 K with a concomitant shortening of the photoluminescence lifetime due to the energy transfer between nanocrystals. When exposed to air, self-assembled CsPbBr 3 nanocrystals develop bulk-like CsPbBr 3 particles on top of the superlattices. At 4 K, these particles produce a distribution of narrow, low-energy emission peaks with short lifetimes and excitation fluence-dependent, oscillatory decays. Overall, the aging of CsPbBr 3 nanocrystal assemblies dramatically alters their emission properties and that should not be overlooked when studying collective optoelectronic phenomena nor confused with superfluorescence effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Photocatalytic Ammonia Synthesis using Fe-Based MOFs: The Role of Ligand Functionalization

Photocatalytic ammonia (NH 3 ) synthesis offers a carbon-neutral alternative to the Haber−Bosch process, which generates 42 million metric tons of CO 2 equivalent emissions annually. However, solar-to-ammonia conversion with contemporary photocatalysts remains far from practical requirements, and understanding the limiting factors in systems with well-defined active sites is crucial. Here, we show how the μ 3 -oxo-centered trinuclear Fe cluster in MIL-101(Fe) functions as the catalytic motif for N 2 -to-NH 3 conversion through combined experimental and computational investigations. Comparative studies with a molecular analogue demonstrate that the cluster is stabilized within the MOF framework, sustaining redox cycling and maintaining high catalytic activity. We systematically functionalized the dicarboxylate ligands of MIL-101(Fe) with −NH 2 , −Br, −NO 2 , −F, and −CF 3 to probe how ligand chemistry modulates Fe electron density, N 2 adsorption capacity, and proton availability, correlating these properties with catalytic performance using spectroscopic and surface characterization techniques alongside timeresolved infrared to assess excited-state lifetimes. F-functionalization optimally balances N 2 activation, proton availability at Fe active sites, and excited-state lifetimes, boosting NH 3 production by ∼ 60% relative to unmodified MIL-101(Fe). This study of ligandfunctionalized MIL-101(Fe) MOFs uncovers the underlying structure-activity relationships and advances design principles for solardriven NH 3 synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An electrochemically stable homogeneous glassy electrolyte formed at room temperature for all-solid-state sodium batteries

All-solid-state sodium batteries (ASSSBs) are promising candidates for grid-scale energy storage. However, there are no commercialized ASSSBs yet, in part due to the lack of a low-cost, simple-to-fabricate solid electrolyte (SE) with electrochemical stability towards Na metal. In this work, we report a family of oxysulfide glass SEs (Na 3 PS 4-x O x , where 0 < x ≤ 60) that not only exhibit the highest critical current density among all Na-ion conducting sulfide-based SEs, but also enable high-performance ambient-temperature sodium-sulfur batteries. By forming bridging oxygen units, the Na 3 PS 4-x Ox SEs undergo pressure-induced sintering at room temperature, resulting in a fully homogeneous glass structure with robust mechanical properties. Furthermore, the self-passivating solid electrolyte interphase at the Na|SE interface is critical for interface stabilization and reversible Na plating and stripping. The new structural and compositional design strategies presented here provide a new paradigm in the development of safe, low-cost, energy-dense, and long-lifetime ASSSBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Metallofullerene photoswitches driven by photoinduced fullerene-to-metal electron transfer

We report on the discovery and detailed exploration of the unconventional photo-switching mechanism in metallofullerenes, in which the energy of the photon absorbed by the carbon cage π-system is transformed to mechanical motion of the endohedral cluster accompanied by accumulation of spin density on the metal atoms. Comprehensive photophysical and electron paramagnetic resonance (EPR) studies augmented by theoretical modelling are performed to address the phenomenon of the light-induced photo-switching and triplet state spin dynamics in a series of Y x Sc 3-x N@C 80 (x = 0–3) nitride clusterfullerenes. Variable temperature and time-resolved photoluminescence studies revealed a strong dependence of their photophysical properties on the number of Sc atoms in the cluster. All molecules in the series exhibit temperature-dependent luminescence assigned to the near-infrared thermally-activated delayed fluorescence (TADF) and phosphorescence. The emission wavelengths and Stokes shift increase systematically with the number of Sc atoms in the endohedral cluster, whereas the triplet state lifetime and S 1 –T 1 gap decrease in this row. For Sc 3 N@C 80 , we also applied photoelectron spectroscopy to obtain the triplet state energy as well as the electron affinity. Spin distribution and dynamics in the triplet states are then studied by light-induced pulsed EPR and ENDOR spectroscopies. The spin–lattice relaxation times and triplet state lifetimes are determined from the temporal evolution of the electron spin echo after the laser pulse. Well resolved ENDOR spectra of triplets with a rich structure caused by the hyperfine and quadrupolar interactions with 14 N, 45 Sc, and 89 Y nuclear spins are obtained. The systematic increase of the metal contribution to the triplet spin density from Y 3 N to Sc 3 N found in the ENDOR study points to a substantial fullerene-to-metal charge transfer in the excited state. These experimental results are rationalized with the help of ground-state and time-dependent DFT calculations, which revealed a substantial variation of the endohedral cluster position in the photoexcited states driven by the predisposition of Sc atoms to maximize their spin population.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Luminescent Zr Complexes with Long-lived Intraligand Charge Transfer Excited States

Understanding and establishing design principles to tune the excited states of earth-abundant sensitizers is crucial for identifying new photosensitizers for sustainable technological advancements. Here, we report a series of three bis Zr (IV) complexes of tridentate, dianionic ligands incorporating two phenoxide donors and aza arene acceptors of increasing electron affinity (pyridine < pyrimidine < pyrazine ) that are air and water-stable. These complexes emit via thermally assisted delayed fluorescence from an intraligand charge transfer excited state with varying metal contributions. The electronic structural changes from different acceptors vary the excited state character and the photophysical properties significantly between the complexes. The variation in photophysics that includes emission lifetime (76 μs to 265 ns), intersystem crossing (ISC) lifetime ( 390 – 290 ps), and the energy difference between the singlet and triplet excited states (∆EST. 170 -100 meV). We observe solvent-independent ISC rates when the excited state has metal contributions (acceptor = pyridine), and the ISC rates vary significantly with solvent polarity when the excited state is an intra-ligand charge transfer state (acceptor = pyrimidine and pyrazine). Transient absorption measurements provided the basis spectra and verified the metal contribution in the excited state. This work provides a basis for developing new sensitizers based on Zr (IV) by providing design principles that can be used to modulate the character of the excited state and its photophysics.

Nattikallungal, Thabassum A. [University of Southe↗
DOE OSTI2023

Characterization of radiation damage effects in high-energy neutrino target graphite using low-energy ions

Exposure of graphite targets to high intensity proton beams at neutrino production facilities causes changes in the target material that can result in a shortened operation lifetime. The dominant factors in this process are currently thought to be mechanical in nature resulting primarily from microstructural effects that lead to thermal and structural changes in bulk material properties. As currently planned beam facilities with increased proton energy and intensity begin to come online it will be important to thoroughly understand these processes, and ideally to be able to predict the effects of new beam designs on target properties. Direct analysis of targets exposed to existing high-energy proton beams is complicated by several factors, such as very limited access to proton beam facilities, high associated costs, irradiation times on the order of months, and the resulting radioactivity of irradiated samples that requires special facilities for post-irradiation examination. Much of the existing literature concerning irradiation damage in graphite has been focused on the needs of the nuclear engineering community, however high-energy proton targets operate in a much different environment. In comparison to graphite irradiated in a nuclear reactor, graphite used in proton beam targets receives a higher dose rate, have greater gas production, and experience short irradiation pulses as opposed to continuous irradiation. Low-energy ion irradiation offers a method of inducing similar levels of radiation damage to high-energy protons while avoiding many of the difficulties and limitations associated with high-energy proton beams and the corresponding activated specimen testing. My research described in this thesis focused on investigating how low-energy ion irradiation could be used to induce the same or similar types of microstructural alteration and mechanical property degradation as that seen in high-energy neutrino production target graphites by varying damage le vels and irradiation temperatures prior to post-irradiation characterisation.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

The interplay between chromophore and protein determines the extended excited state dynamics in a single-domain phytochrome

Phytochromes are a diverse family of bilin-binding photoreceptors that regulate a wide range of physiological processes. Their photochemical properties make them attractive for applications in optogenetics and superresolution microscopy. Phytochromes undergo reversible photoconversion triggered by the Z ⇌ E photoisomerization about the double bond in the bilin chromophore. However, it is not fully understood at the molecular level how the protein framework facilitates the complex photoisomerization dynamics. In this work, we have studied a single-domain bilin-binding photoreceptor All2699g1 ( Nostoc sp. PCC 7120) that exhibits photoconversion between the red light-absorbing (P r ) and far red-absorbing (P fr ) states just like canonical phytochromes. We present the crystal structure and examine the photoisomerization mechanism of the P r form as well as the formation of the primary photoproduct Lumi-R using time-resolved spectroscopy and hybrid quantum mechanics/molecular mechanics simulations. We show that the unusually long excited state lifetime (broad lifetime distribution centered at ~300 picoseconds) is due to the interactions between the isomerizing pyrrole ring D and an adjacent conserved Tyr142. The decay kinetics shows a strongly distributed character which is imposed by the nonexponential protein dynamics. Our findings offer a mechanistic insight into how the quantum efficiency of the bilin photoisomerization is tuned by the protein environment, thereby providing a structural framework for engineering bilin-based optical agents for imaging and optogenetics applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Structural and Electronic Properties of Indium-Doped n-type Cd-Se-Te Crystals

Here, we present a comprehensive investigation into the potential of n-type indium-doped cadmium selenide telluride (CST:In) as a high-performance candidate for solar cell applications, without the need for resource-intensive post-growth treatments that are required for CdTe:In. We compared undoped CST and CST:In crystals under different growth conditions, analyzing their structural and electronic properties using x-ray diffraction (XRD), electron probe microanalysis (EPMA), current-voltage (IV) and Hall effect measurements, time-resolved photoluminescence (TRPL), optical transmission, and photoluminescence (PL) mapping. The results reveal that as-grown CST:In crystals achieve nearly 100% carrier activation, yielding an electron concentration of 9.5x1018 cm -3 , mobility of 653 cm 2 /V.s and a 5 ns lifetime which approaches the radiative limit. Furthermore, comparison of PL maps from crystal growths having different cooling profiles suggests a strong effect of cooling rate on selenium segregation and cubic/hexagonal/polytype phase distribution. Slower cooling leads to a more homogeneous cubic structure with lower Se segregation, while a faster cooling rate results in increased Se segregation, and twin boundaries and stacking faults with polytypic and hexagonal character.

14 SOLAR ENERGY↗
DOE OSTI2021

Spectroscopic Signatures of MQ-Resins in Silicone Elastomers

Polysiloxane elastomers have a large application space due to their versatile cross-linking chemistry and highly tunable physical and mechanical properties. One approach for improving the mechanical integrity of commercial polysiloxane “silicone” elastomers while maintaining their optical transparency is the addition of small, silicone-resin molecules to the network. However, both the poly(dimethylsiloxane) (PDMS) network and the silicone-resin particles have an amorphous structure and complex chemistry, which makes the characterization of their structural properties and segmental network dynamics difficult. Here, we report the synthesis and characterization of a series of model silicone networks modified with a specific class of silicone-resin known as MQ-resin using Raman and advanced nuclear magnetic resonance (NMR) spectroscopy methods. Raman spectroscopy was successfully used to quantify the contribution of the MQ-resin to the network, to determine the type of MQ-resin present in the network, and to investigate the completeness of the network cross-linking reaction. Furthermore, solid-state and 1H double-quantum (DQ) NMR spectroscopies were used not only as a detection method for the MQ-resins but also to quantify changes in the segmental dynamics of the network as a function of MQ-resin concentration. The combination of Raman and NMR spectroscopies describes a series of samples where the MQ-resin particles and PDMS chains maintain their independent segmental dynamics up to high concentrations of MQ-resins (40–50% MQ), where the physical properties of the resin dominate the physical properties of the overall network. The results from our spectroscopic analyses are consistent with the results from macroscopic characterization techniques such as solvent uptake and mechanical testing. The spectroscopic insights into the structure–property relationships of PDMS-MQ composites presented in this study are a valuable tool not only for the synthesis and reverse engineering of future generations of commercial silicone elastomers but also for understanding the mechanisms of aging and degradation over the material lifetime.

36 MATERIALS SCIENCE↗