Search NASA⌕ Search

SEARCH · Search NASA

Results for “Substrate effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Thermal barrier coating life prediction model

The objectives of this research were to determine the predominant modes of degradation of a plasma sprayed thermal barrier coating (TBC) system, and then to develop and verify life prediction models accounting for these degradation modes. The TBC system consists of a low pressure plasma sprayed (LPPS) bond coat layer of Ni-22Cr-10Al-O.3Y, an air plasma sprayed (APS) yttria partially stabilized zirconia (ZrO sub 2-8Y sub 2 O sub 3) top coat on a conventionally cast Rene 80 (Ni base) substrate. Thermal cycle testing of TBCs was employed to evaluate the effect of coating edges, bond coat oxidation, bond coat creep, top coat thickness, and bond coat thickness.

Pilsner, B.↗

Thermo-Optical and Mechanical Property Testing of Candidate Solar Sail Materials

Solar sailing is a unique form of propulsion where a spacecraft gains momentum from incident photons. Since sails are not limited by reaction mass, they provide continual acceleration, reduced only by the lifetime of the lightweight film in the space environment and the distance to the Sun. Practical solar sails can expand the number of possible missions, enabling new concepts that are difficult by conventional means. The National Aeronautics and Space Administration's Marshall Space Flight Center (MSFC) is concentrating research into the utilization of ultra-lightweight materials for spacecraft propulsion. Solar sails are generally composed of a highly reflective metallic front layer, a thin polymeric substrate, and occasionally a highly emissive back surface. The Space Environmental Effects Team at MSFC is actively characterizing candidate sails to evaluate the thermo-optical and mechanical properties after exposure to electrons. This poster will discuss the preliminary results of this research.

Hollerman, WIlliam A.↗

Alignment and Testing for a Freeform Telescope

Currently there is a strong desire to make Earth science less expensive. Freeform optics make these missions less expensive because they allow an optical designer to use fewer mirrors to create roughly the same effect. The main issue with using freeforms is how closely the substrate can be milled to its prescription. Over this summer, our team looked at two freeforms made by Corning Inc. using a brand new process to determine how close these optics are to their set prescriptions and how well NASA could align them.

Alignment↗

Applications of Atomic Layer Deposition in the Modification of Carbon Nanotubes

Atomic Layer Deposition (ALD) is a cost-effective nanoadditive-manufacturing technique that allows for conformal coating of substrates with atomic control in a benign temperature and pressure environment. Using paired precursor gases, thin films can be deposited on flat or textured surfaces ranging from glass, polymers, aerogels, and metals. Through atomic layer control, where single layers of atoms are deposited, fabrication of metal transparent films, nano-laminates, and coatings of nano-channels and pores is achievable. Reaction mechanisms in ALD are normally self-limiting, allowing for atomically accurate control of nanometer (nm) thicknesses. Therefore, high uniformity and precise thickness control make ALD an attractive process for the creation of novel nano-scale devices. Decreases in resistivity and density of electrical wire are needed to improve the function of electronics, electric motors and cables. Such improvements may be accomplished by adding ballistically conducting, metallic carbon nanotubes (CNT) to Cu. ALD was used to coat multiple substrates including CNT with Cu in an effort to make CNT-Cu composites which is more conductive and less dense than Cu. In addition, ALD can be used to as a method to deposit the catalyst layer seed layer for CNT growth using Ni. The ALD of copper metallic films can follow multiple reaction pathways depending on the ALD precursors used. For this work the reaction pathway was deposition of copper oxide and then post process annealing in a hydrogen environment. Copper(II) diacetylacetonate (Cu(acac)2) and ozone are used as precursors for copper oxide. As-deposited copper oxide films prepared at 180°C resulted in a growth per cycle of 1.0 A/cycle with low film resistivity.

Dwivedi, Vivek H.↗

TEM Characterization of Solar Wind Effects on Genesis Mission Silicon Collectors

The Genesis Discovery Mission passively allowed solar wind (SW) to implant into substrates during exposure times up to ~853 days from 2001 to 2004. The spacecraft then returned the SW to Earth for analysis. Substrates included semiconductor wafers (silicon, sapphire, and germanium), as well as a number of thin films supported by either silicon or sapphire wafers. During flight, subsets of the SW collectors were exposed to one of 4 SW regimes: bulk solar wind, coronal hole solar wind (CH, high speed), interstream solar wind (IS, low speed) or coronal mass ejections (CMEs). Each SW regime had a different composition and range of ion speeds and, during their collection, uniquely changed their host SW collector. This study focuses on bulk vs IS SW effects on CZ silicon.

Allums, K. K.↗

Growth and patterning of laser ablated superconducting YBa2Cu3O7 films on LaAlO3 substrates

A high quality superconducting film on a substrate with a low dielectric constant is desired for passive microwave circuit applications. In addition, it is essential that the patterning process does not effect the superconducting properties of the thin films to achieve the highest circuit operating temperatures. YBa2Cu3O7 superconducting films were grown on lanthanum aluminate substrates using laser ablation with resulting maximum transition temperature (T sub c) of 90 K. The films were grown on a LaAlO3 which was at 775 C and in 170 mtorr of oxygen and slowly cooled to room temperature in 1 atm of oxygen. These films were then processed using photolithography and a negative photoresist with an etch solution of bromine and ethanol. Results are presented on the effect of the processing on T(sub c) of the film and the microwave properties of the patterned films.

Warner, J. D.↗

Partial analysis of experiment LDEF A-0114

Due to delays in manifesting the return of the Long Duration Exposure Facility from space, attention was concentrated on extracting the maximum information from the EIOM-2 (oxygen interaction with materials experiment) flown on STS-8 in September 1983. An analysis was made of the optical surfaces exposed during that flight and an assessment made of the effect of the 5 eV atomic oxygen upon their physical and chemical properties. The surfaces studied were of two types: high-purity thin films sputtered or evaporated onto 2.54-cm diam lambda/20 fused silica optical flats, and highly polished bulk samples. Rapid etching of carbon and carbonaceous surfaces was observed with polycarbonate CR-39 showing the largest etch of any substrate flown and measured. Of the metals tested, only osmium and silver showed large effects, the former being heavily etched and the later forming a very thick layer of oxide. The first measurable effects on iridium, aluminum, nickel, tungsten and niobium thin films are reported.

Gregory, J. C.↗

High Electron Mobility Transistor Structures on Sapphire Substrates Using CMOS Compatible Processing Techniques

System-on-a-chip (SOC) processes are under intense development for high-speed, high frequency transceiver circuitry. As frequencies, data rates, and circuit complexity increases, the need for substrates that enable high-speed analog operation, low-power digital circuitry, and excellent isolation between devices becomes increasingly critical. SiGe/Si modulation doped field effect transistors (MODFETs) with high carrier mobilities are currently under development to meet the active RF device needs. However, as the substrate normally used is Si, the low-to-modest substrate resistivity causes large losses in the passive elements required for a complete high frequency circuit. These losses are projected to become increasingly troublesome as device frequencies progress to the Ku-band (12 - 18 GHz) and beyond. Sapphire is an excellent substrate for high frequency SOC designs because it supports excellent both active and passive RF device performance, as well as low-power digital operations. We are developing high electron mobility SiGe/Si transistor structures on r-plane sapphire, using either in-situ grown n-MODFET structures or ion-implanted high electron mobility transistor (HEMT) structures. Advantages of the MODFET structures include high electron mobilities at all temperatures (relative to ion-implanted HEMT structures), with mobility continuously improving to cryogenic temperatures. We have measured electron mobilities over 1,200 and 13,000 sq cm/V-sec at room temperature and 0.25 K, respectively in MODFET structures. The electron carrier densities were 1.6 and 1.33 x 10(exp 12)/sq cm at room and liquid helium temperature, respectively, denoting excellent carrier confinement. Using this technique, we have observed electron mobilities as high as 900 sq cm/V-sec at room temperature at a carrier density of 1.3 x 10(exp 12)/sq cm. The temperature dependence of mobility for both the MODFET and HEMT structures provides insights into the mechanisms that allow for enhanced electron mobility as well as the processes that limit mobility, and will be presented.

Mueller, Carl↗

Radiation Effects on Current Field Programmable Technologies

Manufacturers of field programmable gate arrays (FPGAS) take different technological and architectural approaches that directly affect radiation performance. Similar y technological and architectural features are used in related technologies such as programmable substrates and quick-turn application specific integrated circuits (ASICs). After analyzing current technologies and architectures and their radiation-effects implications, this paper includes extensive test data quantifying various devices total dose and single event susceptibilities, including performance degradation effects and temporary or permanent re-configuration faults. Test results will concentrate on recent technologies being used in space flight electronic systems and those being developed for use in the near term. This paper will provide the first extensive study of various configuration memories used in programmable devices. Radiation performance limits and their impacts will be discussed for each design. In addition, the interplay between device scaling, process, bias voltage, design, and architecture will be explored. Lastly, areas of ongoing research will be discussed.

Katz, R.↗

Melt-Crucible Wetting Behavior in Semiconductor Melt Growth Systems

The wetting angles of several semiconductor-substrate combinations that are of practical importance for crystal growth have been measured: Ga-GaSb-Sb on fused quartz; Ge on fused quartz and carbon-based substrates, each with different roughness; Si on fused quartz plates and on plates coated with fused quartz, Si3N4, and BN powders. The Ga-GaSb-Sb system showed no significant dependence of the wetting angle on the composition despite a large composition dependence of the surface tension. For Ge, the effect of the roughness on the angle could initially be seen on both types of substrates, but for the fused quartz substrates an equilibrium value independent of the surface treatment was reached after several hours of contact time. For Si, total wetting was found for Si3N4 powders. A reduction of the angle over time was found for both fused quartz and BN powders, with the BN powder showing the highest angle at 150-120 deg.

Croell, A.↗

Insulators for Pb(1-x)Sn(x)Te

Thin films of LaF3 were e-gun and thermally deposited on several substrates. The e-gun deposited films are fluorine deficient, have high ionic conductivities that persist to 77 K, and high effective dielectric constants. The thermally deposited material tends to be closer to stoichiometric, and have higher effective breakdown field strengths. Thermally deposited LaF3 films with resistivities in excess of 10 to the 12th power ohms - cm were deposited on metal coated glass substrates. The LaF3 films were shown to adhere well to PbSnTe, surviving repeated cycles between room temperature and 77 K. The LaF3 films on GaAs were also studied.

Tsuo, Y. H.↗

Asymmetric photolysis of /RS/-leucine with circularly polarized ultraviolet light

(RS)-leucine in 0.1 M HCl solution has been subjected to photolysis with 212.8-nm right (R-) and left circularly polarized light (LCPL) obtained from a laser source. RCPL preferentially photolyzed the (R)-leucine component and LCPL the (S)-leucine component of the RS substrate. The enantiomeric excess produced were 1.98% for the 59% conversion with RCPL and 2.50% for the 75% conversion with LCPL. These 'equal and opposite' effects represent the second highest enantiomeric enrichments yet reported for an asymmetric photolysis and the first ever reported for a prebiotically important substrate - an amino acid. Implications regarding the origin of optical activity are briefly discussed.

Flores, J. J.↗

Proximity effect between superconducting and normal metals

Electrical characteristics of thin films of tin vapor deposited on gold substrates are described. Favorable characteristics of these films include: (1) shiny and smooth finishes; (2) higher Josephson critical currents; (3) smaller electronic mean paths; and (4) consistent current-voltage curve shapes. One unfavorable characteristic is a much steeper increase of the Josephson critical current with decreasing temperature. The functional variation of the Josephson current with the control current is described. Two functional forms have been observed and a brief description as to possible mechanisms for this behavior have been included.

Meissner, H.↗

Investigation to develop a method to apply diffusion barrier to high strength fibers

A radio frequency powered ion plating process was used to apply the diffusion barriers of aluminum oxide, yttrium oxide, hafnium oxide and titanium carbide to a substrate tungsten fiber. Each of the coatings was examined as to its effect on both room temperature strength and tensile strength of the base tungsten fiber. The coated fibers were then overcoated with a nickel alloy to become single cell diffusion couples. These diffusion couples were exposed to 1093 C for 24 hours, cycled between room temperature and 1093 C, and given a thermal anneal for 100 hours at 1200 C. Tensile testing and metallographic examinations determined that the hafnium oxide coating produced the best high temperature diffusion barrier for tungsten of the four coatings.

Veltri, R. D.↗

The significance of substrate characteristics in determining morphology and morphometry of lunar craters

Variations in the morphologic and morphometric characteristics of lunar craters appear to correlate well with the characteristics of the outer lunar crust and the presence of a 2-3 km thick megaregolith layer. These correlations suggest that substrate layering in general, and megaregolith in particular, may have an important effect on the excavation and modification stages in the formation of lunar craters.

Head, J. W.↗

Erosion of frozen sulfur dioxide by ion bombardment - Applications to Io

The erosion of frozen SO2 due to bombardment by both light and heavy ions (He and F) was measured for bombarding energies of 0.08 to 1.3 MeV/amu. The number of SO2 molecules ejected from the target per incident ion (i.e., the sputtering yield) was 50 for 1.5 MeV He ions and 7300 for 6 MeV F ions. Ion bombardment followed by heating produced an oxygen/sulfur residue which was much more stable against subsequent ion bombardment than the initial frozen SO2. The erosion rate of SO2 frost on Jupiter's moon Io depends strongly on the elemental composition and energy spectra of the magnetospheric ion flux which bombards the surface. The combined effects of ion bombardment and heating which produced residues on the target substrates may also occur on Io from magnetospheric ion bombardment and heating by volcanism. The experimental results compare favorably with a new model of the sputtering process which considers the energy loss of the incident ion to electronic excitation in the target.

Melcher, C. L.↗