Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sun activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

High‐Temperature Mechanical Behavior of Single‐Crystal FeCrAl Alloy Under In Situ Micropillar Compression

FeCrAl cladding is one of the candidate materials for the near‐term accident‐tolerant fuel technologies under development. Research on high‐temperature mechanical behaviors of single‐crystal FeCrAl alloy is rather limited. Previous studies have reported the mechanical property of low‐index orientation in single‐crystal FeCrAl alloy at room temperature. However, the critical resolved shear stress to activate slip systems can be orientation and temperature dependent. Here, single‐crystal grains in a coarse‐grained FeCrAl alloy with different crystallographic orientations are selected to preferentially activate {110}<111> slip systems or {112}<111> slip systems. Micropillars are fabricated in the selected single‐crystal grains and tested at elevated temperatures in situ in a scanning electron microscope. The critical resolved shear stresses of {110}<111> slip systems and {112}<111> slip systems are determined at various temperatures. The critical resolved shear stress shows a temperature dependence and orientation independence. This study provides important insight for understanding the deformation mechanisms of FeCrAl alloys at elevated temperatures.

Sun, Tianyi↗
DOE OSTI2020

Unraveling the influence of non-fullerene acceptor molecular packing on photovoltaic performance of organic solar cells

In non-fullerene organic solar cells, the long-range structure ordering induced by end-group π–π stacking of fused-ring non-fullerene acceptors is considered as the critical factor in realizing efficient charge transport and high power conversion efficiency. Here, we demonstrate that side-chain engineering of non-fullerene acceptors could drive the fused-ring backbone assembly from a π–π stacking mode to an intermixed packing mode, and to a non-stacking mode to refine its solid-state properties. Different from the above-mentioned understanding, we find that close atom contacts in a non-stacking mode can form efficient charge transport pathway through close side atom interactions. The intermixed solid-state packing motif in active layers could enable organic solar cells with superior efficiency and reduced non-radiative recombination loss compared with devices based on molecules with the classic end-group π–π stacking mode. Our observations open a new avenue in material design that endows better photovoltaic performance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Structure and regulation of human epithelial cell transforming 2 protein

Epithelial cell transforming 2 (Ect2) protein activates Rho GTPases and controls cytokinesis and many other cellular processes. Dysregulation of Ect2 is associated with various cancers. Here, we report the crystal structure of human Ect2 and complementary mechanistic analyses. The data show the C-terminal PH domain of Ect2 folds back and blocks the canonical RhoA-binding site at the catalytic center of the DH domain, providing a mechanism of Ect2 autoinhibition. Ect2 is activated by binding of GTP-bound RhoA to the PH domain, which suggests an allosteric mechanism of Ect2 activation and a positive-feedback loop reinforcing RhoA signaling. Furthermore this bimodal RhoA binding of Ect2 is unusual and was confirmed with Förster resonance energy transfer (FRET) and hydrogen–deuterium exchange mass spectrometry (HDX-MS) analyses. Several recurrent cancer-associated mutations map to the catalytic and regulatory interfaces, and dysregulate Ect2 in vitro and in vivo. Together, our findings provide mechanistic insights into Ect2 regulation in normal cells and under disease conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Evoking ordered vacancies in metallic nanostructures toward a vacated Barlow packing for high-performance hydrogen evolution

Metallic nanostructures are commonly densely packed into a few packing variants with slightly different atomic packing factors. The structural aspects and physicochemical properties related with the vacancies in such nanostructures are rarely explored because of lack of an effective way to control the introduction of vacancy sites. Highly voided metallic nanostructures with ordered vacancies are however energetically high lying and very difficult to synthesize. Here, we report a chemical method for synthesis of hierarchical Rh nanostructures (Rh NSs) composed of ultrathin nanosheets, composed of hexagonal close-packed structure embedded with nanodomains that adopt a vacated Barlow packing with ordered vacancies. The obtained Rh NSs exhibit remarkably enhanced electrocatalytic activity and stability toward the hydrogen evolution reaction (HER) in alkaline media. Theoretical calculations reveal that the exceptional electrocatalytic performance of Rh NSs originates from their unique vacancy structures, which facilitate the adsorption and dissociation of H 2 O in the HER.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Amino-tethering synthesis strategy toward highly accessible sub-3-nm L1 0 -PtM catalysts for high-power fuel cells

Because of the poor accessibility of embedded active sites, platinum (Pt)-based electrocatalysts suffer from insufficient Pt utilization and mass transport in membrane electrode assemblies (MEAs), limiting their performance in polymer electrolyte membrane fuel cells. Here, we report a simple and universal approach to depositing sub-3-nm L1 0 -PtM nanoparticles over external surfaces of carbon supports through pore-tailored amino (NH 2 )-modification, which enables not only excellent activity for the oxygen reduction reaction, but also enhanced Pt utilization and mass transport in MEAs. Using a low loading of 0.10 mg Pt ∙cm -2 , the MEA of PtCo/KB-NH 2 delivered an excellent mass activity of 0.691 A∙mgPt -1 , a record-high power density of 0.96 W∙cm -2 at 0.67 V, and only a 30-mV drop at 0.80 A∙cm -2 after 30,000 voltage cycles, which meets nearly all targets set by the Department of Energy. Finally, this work provides an efficient strategy for designing advanced Pt-based electrocatalysts and realizing high-power fuel cells.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Depolymerization of polyesters by a binuclear catalyst for plastic recycling

Plastics play an essential role in modern society, however, the relentless growth of their production is threatening both human health and ecosystems. As a result, there are intensive efforts in developing recycling technologies to repurpose waste plastics into the building blocks for valuable materials. Here we show a binuclear complex that can catalyze the degradation of polyethylene terephthalate (PET)-the most widely used polyester globally-and a wide spectrum of other plastics including polylactic acid (PLA), polybutylene adipate terephthalate (PBAT), polycaprolactone (PCL), polyurethane (PU) and Nylon 66. Inspired by hydrolases, the group of enzymes that catalyze bond cleavages with water, the present catalyst design features biomimetic Zn-Zn sites which activate the plastic, stabilize the key intermediate, and enable intramolecular hydrolysis. This synthetic catalyst delivers activities of 36 mg PET d -1 g catal -1 toward PET depolymerization at pH 8 and 40 oC, and of 577 g PET d -1 g catal -1 at pH 13 and 90 oC for scalable PET recycling. We further demonstrate the closed-loop production of a bottle-grade PET. This work presents a practical and viable solution to the sustainable management of plastics waste.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Synergy of Oxygen Vacancies and Base Sites for Transfer Hydrogenation of Nitroarenes on Ceria Nanorods

Abstract CeO 2 nanorod based catalysts for the base‐free synthesis of azoxy‐aromatics via transfer hydrogenation of nitroarenes with ethanol as hydrogen donor have been synthesized and investigated. The oxygen vacancies (O v ) and base sites are critical for their excellent catalytic properties. The O v , i.e., undercoordinated Ce cations, serve as the sites to activate ethanol and nitroarenes by lowering the energy barrier to transfer hydrogen from α−C sp3 −H in ethanol to the nitro group coupling it to the redox reactions between Ce 3+ and Ce 4+ . At the same time, the base sites catalyze the condensation step to selectively produce azoxy‐aromatics. The catalytic route opens a much improved way to use non‐noble metal oxides without additives for the selective functional group reduction and coupling reactions.

Yuan, Ziliang↗
DOE OSTI2024

Hydrogenolysis of Poly(Ethylene–co–Vinyl Alcohol) and Related Polymer Blends over Ruthenium Heterogeneous Catalysts

The hydrogenolysis of polymers is emerging as a promising approach to deconstruct plastic waste into valuable chemicals. Yet, the complexity of plastic waste, including multilayer packaging, is a significant barrier to handling realistic waste streams. Herein, we reveal fundamental insights into a new chemical route for transforming a previously unaddressed fraction of plastic waste – poly(ethylene–co­­–vinyl alcohol) (EVOH) and related polymer blends – into alkane products. Additionally, we report that Ru/ZrO2 is active for the concurrent hydrogenolysis, hydrogenation, and hydrodeoxygenation of EVOH and its thermal degradation products into alkanes (C1–C35) and water. Detailed reaction data, product analysis, and catalyst characterization reveal that the in–situ thermal degradation of EVOH forms aromatic intermediates that are detrimental to catalytic activity. Increased hydrogen pressure promotes hydrogenation of these aromatics, preventing catalyst deactivation and improving alkane product yields. Calculated apparent rates of C–C scission reveal that the hydrogenolysis of EVOH is slower than low–density polyethylene. We apply these findings to achieve hydrogenolysis of EVOH/polyethylene blends and elucidate the sensitivity of hydrogenolysis catalysts to such blends. Overall, we demonstrate progress towards efficient catalytic processes for the hydroconversion of waste multilayer film plastic packaging into valuable products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking

The extensive use of plastics in modern life has resulted in a global waste crisis to the environment. Polyethylene (PE) is one of the most popular and hardest plastics to recycle because of its strong C(sp 3 )-C(sp 3 ) bonds. In this study, a tandem conversion process, i.e., hydropyrolysis and subsequent vapor-phase hydrocracking of primary intermediates (C n>5 alkenes and long-chain alkanes), was conducted via a two-step pressurized flow-through fixed-bed reactor over a CoAl 2 O 4 spinel-derived catalyst. The product distribution could be flexibly tuned by regulating operating parameters in the cascade fixed-bed reactor and Co/Al molar ratio in CoAl 2 O 4 spinel catalysts. Under optimal reaction conditions (0.2 MPa H 2 , 550 °C for hydropyrolysis in the 1st reactor, 300–325 °C for hydrocracking in the 2nd reactor, 20 s -1 of gas hourly space velocity), the maximum single-pass yields of gasoline (C 5 -C 12 ) and jet-fuel (C 8 -C 16 ) range n-alkanes reached 86.0 wt% and 68.1 wt%, respectively. The CoAl 2 O 4 spinel catalysts also gained high activity in degrading realistic post-consumer plastics such as linear low-, low-, and high-density PE, and a ~ 73.1 wt% gasoline yield and a ~ 54.7 wt% C 8 -C 16 yield were retained even after 3 cycles in-situ regeneration of deactivated CoAl 2 O 4 catalysts. This work provides an efficient and tunable approach to upcycle PE wastes into liquid fuels with an ideal carbon length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Warming decreases desert ecosystem functioning by altering biocrusts in drylands

Warming and precipitation fluctuations are changing desert ecosystems in global drylands. However, the effects of climate change on keystone species such as cryptogamic biocrust in drylands remain relatively under-investigated, even though biocrusts play a vital role in desert ecosystems. Here we conducted a long-term experiment (14 years) to simulate the responses of two main types of biocrusts to warming coupled with reduction in precipitation that was achieved by open-top chambers (OTCs) to simulate the predicted warming and precipitation decreasing under climate change scenario. We also conduct a structural analysis to evaluate the resulting changes in desert ecosystem functioning (carbon and nitrogen cycling). Neither warming and corresponding rainfall reduction treatments had a negative effect on lichen species richness, but both treatments reduced lichen cover and biomass. The negative effects of warming on moss-dominated crusts were much greater than those on lichen-dominated crusts. Although mosses and lichens had varying degree responses to warming, the loss of mosses and decreased lichen cover and biomass, as well as the shortening of the wet time, resulted in a reduction in carbon and nitrogen fixation, soil enzyme activity and water-holding capacity of biocrusts and topsoil. These impacts collectively change the water balance of drylands and weaken the hydrological and biogeochemical function of biocrusts. Synthesis and applications: Results from this long-term experiment suggest that the ecosystem C and N cycling and water balance of global drylands may be highly impacted by climate change, in part because of the response of biocrusts, which contribute an important implication for both dryland restoration and earth system dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Visualizing interfacial collective reaction behaviour of Li–S batteries

Benefiting from high energy density (2,600 Wh kg -1 )) and low cost, lithium-sulfur (Li-S) batteries are considered promising candidates for advanced energy-storage systems. Despite tremendous efforts in suppressing the long-standing shuttle effect of lithium polysulfides, understanding of the interfacial reactions of lithium polysulfides at the nanoscale remains elusive. This is mainly because of the limitations of in situ characterization tools in tracing the liquid-solid conversion of unstable lithium polysulfides at high temporal-spatial resolution. There is an urgent need to understand the coupled phenomena inside Li-S batteries, specifically, the dynamic distribution, aggregation, deposition and dissolution of lithium polysulfides. Here, by using in situ liquid-cell electrochemical transmission electron microscopy, we directly visualized the transformation of lithium polysulfides over electrode surfaces at the atomic scale. Notably, an unexpected gathering-induced collective charge transfer of lithium polysulfides was captured on the nanocluster active-centre-immobilized surface. It further induced an instantaneous deposition of nonequilibrium Li2S nanocrystals from the dense liquid phase of lithium polysulfides. Without mediation of active centres, the reactions followed a classical single-molecule pathway, lithium polysulfides transforming into Li 2 S 2 and Li 2 S step by step. Molecular dynamics simulations indicated that the long-range electrostatic interaction between active centres and lithium polysulfides promoted the formation of a dense phase consisting of Li + and S n 2- (2 < n ≤ 6), and the collective charge transfer in the dense phase was further verified by ab initio molecular dynamics simulations. Finally, the collective interfacial reaction pathway unveils a new transformation mechanism and deepens the fundamental understanding of Li-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Synergistic effect of polyaniline on stabilizing Pt nanoparticles in PEMFCs†

The stability of Pt nanoparticles on a carbon support is crucial for the lifespan of polymer electrolyte membrane fuel cells as well as other electrocatalysis systems such as electrolyzers. Here we took the approach of utilizing the covalently grafted polyaniline on carbon to stabilize Pt nanoparticles by simultaneously alleviating the particle migration and mitigating the Ostwald ripening, which are two major mechanisms for loss of the catalyst stability. A comprehensive investigation of the stability and performance of Pt catalyst nanoparticles on these supports reveals that the polyaniline can shift the Pt L edge binding energy and the Pt 4f peak energy, leading to the increased redox potential of the Pt nanoparticles and making them more resistant to oxidation. Interestingly, the highest polyaniline density (50 wt%) does not show the best catalyst stability, rather, the second (33 wt%) demonstrates the best catalyst stability among these catalysts. Combining the XPS, XAS and fuel cell stability studies, we concluded that the locations of the Pt nanoparticles over the polyaniline layer on the carbon surface depend on the surface density of the polyaniline over the carbon surface. The Pt nanoparticles in the 50 wt% polyaniline catalyst are wrapped by the polyaniline polymer but do not sit directly on the carbon surface, while Pt nanoparticles in the 33 wt% polyaniline catalyst sit on the carbon surface and are densely surrounded by the polyaniline polymer. The results show that the mass activity loss is 12.5% while the ECSA (electrochemically active surface area) loss is 37.1% after 30k cycles of accelerating stress test for the 33 wt% polyaniline catalyst, far exceeding the DOE 2020 target for MEA (i.e., mass activity loss < 50%, and ECSA loss < 40%). Overall, the polyaniline has a synergistic effect on mitigating the surface migration and slowing down the Ostwald ripening to stabilize the Pt nanoparticles in fuel cells. The novel strategy to stabilize Pt nanoparticles using polyaniline opens a new pathway in the development of highly stable catalysts: relying on the functionalization group on the carbon support, instead of just focusing on the catalyst itself.

Li, Chenzhao↗
DOE OSTI2022

Cu-Catalyzed Atom Transfer Radical Polymerization: The Effect of Cocatalysts

Atom transfer radical polymerization (ATRP) is one of the most powerful methods to prepare well-defined (co)polymers. Cu-catalyzed ATRP methods are most commonly used because of the excellent control and tunable catalytic activities via ligand functionalization. This minireview summarizes the development of Cu-catalyzed ATRP in the presence of cocatalysts, which are used to regenerate Cu I complex activators during polymerizations. Fundamentals of Cu-based ATRP catalysts are first introduced, followed by the discussion of different types of cocatalysts in different Cu-catalyzed ATRP methods. Recent developments of photochemical cocatalysts for oxygen-tolerant ATRP and ATRP using long-wavelength irradiation are highlighted, which significantly expand the applications of Cu-catalyzed ATRP. Methods to study the properties of cocatalysts and their roles in Cu-catalyzed ATRP are discussed, with an outlook for the future development of cocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Metabolic engineering of low-pH-tolerant non-model yeast, Issatchenkia orientalis , for production of citramalate

Methyl methacrylate (MMA) is an important petrochemical with many applications. However, its manufacture has a large environmental footprint. Combined biological and chemical synthesis (semisynthesis) may be a promising alternative to reduce both cost and environmental impact, but strains that can produce the MMA precursor (citramalate) at low pH are required. A non-conventional yeast, Issatchenkia orientalis, may prove ideal, as it can survive extremely low pH. Here, we demonstrate the engineering of I. orientalis for citramalate pro- duction. Using sequence similarity network analysis and subsequent DNA synthesis, we selected a more active citramalate synthase gene (cimA) variant for expression in I. orientalis. We then adapted a piggyBac transposon system for I. orientalis that allowed us to simultaneously explore the effects of different cimA gene copy numbers and integration locations. A batch fermentation showed the genome-integrated-cimA strains produced 2.0 g/L citramalate in 48 h and a yield of up to 7% mol citramalate/mol consumed glucose. These results demonstrate the potential of I. orientalis as a chassis for citramalate production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Constructing a square-like copper cluster to boost C–C coupling for CO 2 electroreduction to ethylene

The CO 2 electroreduction reaction (CO 2 ER) to ethylene (C 2 H 4 ) offers the dual promise of lowering CO 2 emission while storing energy from renewable electricity, for which the development of highly efficient electrocatalysts is of great significance. Herein, by means of density functional theory (DFT) computations, we designed an electrocatalyst for CO 2 -to-C 2 H 4 conversion by anchoring a Cu 5 cluster supported on a MoS 2 monolayer with an S monovacancy (Cu 5 @MoS 2 ). Our results revealed that one Cu atom of the Cu 5 cluster was embedded into the framework of the defective MoS 2 monolayer, while the other four Cu atoms form a square-like island over the substrate surface. Interestingly, the C–C coupling between two *CO species can easily occur on the unique square-like active site with a low kinetic barrier of 0.56 eV to form the key *C 2 O 2 intermediate, which can then be hydrogenated to the C 2 H 4 product with a very low limiting potential (–0.32 eV). Significantly, alkaline conditions (pH = 13) are beneficial to further promote C 2 H 4 synthesis. Finally, our work may offer a new avenue to precisely modulate the structures of Cu clusters for converting CO 2 into high-value target products.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Data for Metabolic Engineering of Low-pH-Tolerant Non-Model Yeast, Issatchenkia orientalis , for Production of Citramalate

Methyl methacrylate (MMA) is an important petrochemical with many applications. However, its manufacture has a large environmental footprint. Combined biological and chemical synthesis (semisynthesis) may be a promising alternative to reduce both cost and environmental impact, but strains that can produce the MMA precursor (citramalate) at low pH are required. A non-conventional yeast, Issatchenkia orientalis , may prove ideal, as it can survive extremely low pH. Here, we demonstrate the engineering of I. orientalis for citramalate production. Using sequence similarity network analysis and subsequent DNA synthesis, we selected a more active citramalate synthase gene (cimA) variant for expression in I. orientalis . We then adapted a piggyBac transposon system for I. orientalis that allowed us to simultaneously explore the effects of different cimA gene copy numbers and integration locations. A batch fermentation showed the genome-integrated-cimA strains produced 2.0 g/L citramalate in 48 h and a yield of up to 7% mol citramalate/mol consumed glucose. These results demonstrate the potential of I. orientalis as a chassis for citramalate production.

Conversion↗
DOE OSTI2022

Leafweb: Dataset in Support of Coupled Modeling of Photophysics, Photochemistry, and Biochemistry of Photosynthesis, December 2022 Release

This data set contains measurements of leaf gas exchange and Pulse-Amplitude Modulated (PAM) fluorometry of light, carbon dioxide (CO2), oxygen (O2), and temperature responses from 26 C3 photosynthetic and four C4 photosynthetic species measured by independent researchers in Canada, China, Finland, Netherlands, and United States in the field, garden, or greenhouse. Data were collected between 1987 and 2021, however data for individual species only provide coverage over a few hours to one year. Species include three lianas, three shrubs, two boreal deciduous trees, two boreal evergreen needle-leaf tree, three temperate deciduous trees, four tropical deciduous trees, three tropical evergreen trees, one C3 grass, three C4 grasses, and six crop varieties. These measurements are conducted according to standard protocols in gas exchange (Long and Bernacchi 2003) and PAM fluorometry (Baker 2008). The Scots pine (Pinus sylvestris) dataset contains one-year continuous fluorometry observations made at intervals of 10 or 30 minutes in the field under natural environments using Walz monitoring PAM. Measurements from all other 29 species include simultaneous PAM fluorometry and gas exchange observations. Among these 29 species, seven species were measured with light response curves only (i.e., light intensity varied systematically with ambient CO2 concentration controlled at a constant level, e.g., 400 ppm). All the other 22 species were measured with both the light response and CO2 response (i.e., ambient CO2 concentration varied systematically with light intensity controlled at a constant level, e.g., 1200 µmolm-2s-1). For most species, measurements were made with temperature controlled at ~ 25 degrees Celsius (C) with the exceptions of Scots pine (natural diurnal and seasonal variations), tomato cultivar Basket Vee (~ 21 degrees C), and cotton which contained temperature stress experiments (9 to 40 degrees C). All measurements were made at ambient O2 concentration except for the tomato cultivar Basket Vee and cotton which used two O2 levels (2 and 21%) and rice and tomato cultivar Growdena which used five O2 levels (2, 10, 21, 35, and 50%). This dataset supports the complete modeling of photosynthesis at the leaf scale, including photophysical, photochemical, and biochemical reactions. It will support research in the applications of remotely sensed solar induced chlorophyll fluorescence and the responses of energy dissipation pathways to environmental variations across species and climates. This dataset contains 260 data files in comma separate (.csv) format contained inside 11 compressed (*.zip) files. Additional metadata are provided: one data dictionary, a species information table, and a file-level metadata file in comma separate (.csv) format and a user guide in PDF (*.pdf) format.

air temperature↗
DOE OSTI2023

Synergy of Oxygen Vacancies and Base Sites for Transfer Hydrogenation of Nitroarenes on Ceria Nanorods

CeO 2 nanorod based catalysts for the base-free synthesis of azoxy-aromatics via transfer hydrogenation of nitroarenes with ethanol as hydrogen donor have been synthesized and investigated. The oxygen vacancies (O v ) and base sites are critical for their excellent catalytic properties. The O v , i.e., undercoordinated Ce cations, serve as the sites to activate ethanol and nitroarenes by lowering the energy barrier to transfer hydrogen from α–C sp3 –H in ethanol to the nitro group coupling it to the redox reactions between Ce 3+ and Ce 4+ . At the same time, the base sites catalyze the condensation step to selectively produce azoxy-aromatics. Finally, the catalytic route opens a much improved way to use non-noble metal oxides without additives for the selective functional group reduction and coupling reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗