Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface magnetism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Neutron diffraction study of magnetism in van der Waals layered MnBi 2n Te 3n+1

Two-dimensional van der Waals MnBi 2 n Te 3 n +1 ( n = 1, 2, 3, 4) compounds have been recently found to be intrinsic magnetic topological insulators rendering quantum anomalous Hall effect and diverse topological states. Here, we summarize and compare the crystal and magnetic structures of this family, and discuss the effects of chemical composition on their magnetism. We found that a considerable fraction of Bi occupies at the Mn sites in MnBi 2 n Te 3 n +1 ( n = 1, 2, 3, 4) while there is no detectable Mn at the non-magnetic atomic sites within the resolution of neutron diffraction experiments. The occupancy of Mn monotonically decreases with the increase of n . The polarized neutron diffraction on the representative MnBi 4 Te 7 reveals that its magnetization density is exclusively accumulated at the Mn site, in good agreement with the results from the unpolarized neutron diffraction. The defects of Bi at the Mn site naturally explain the continuously reduced saturated magnetic moments from n = 1 to n = 4. The experimentally estimated critical exponents of all the compounds generally suggest a three-dimensional character of magnetism. Our work provides material-specified structural parameters that may be useful for band structure calculations to understand the observed topological surface states and for designing quantum magnetic materials through chemical doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Topographic Characterization of Niobium Films on Copper for SRF Applications

Niobium films on copper substrates are being actively developed as a low-cost alternative to bulk niobium for superconducting radio-frequency (SRF) cavities, offering superior thermal conductivity, reduced material cost, and the potential for scalable cavity fabrication. The performance of such films can be limited by imperfect surfaces that reduce the peak achievable magnetic field. Nb films deposited under varied electron cyclotron resonance conditions were characterized via atomic force microscopy. The films exhibit a corrugated surface morphology which can be characterized by the depth of the corrugation, slope angle, and standard roughness parameters. The influence of this surface roughness on field limitations is examined within the framework of London theory. These measurements and models aid in understanding how ECR deposition conditions influence the nanometer-scale roughness of Nb films on Cu and its impact on high-field SRF cavity performance.

Redman, Brandi [Old Dominion Univ., Norfolk, VA (U↗
DOE OSTI2021

Laboratory Study of the Torus Instability Threshold in Solar-relevant, Line-tied Magnetic Flux Ropes

Coronal mass ejections (CMEs) occur when long-lived magnetic flux ropes (MFRs) anchored to the solar surface destabilize and erupt away from the Sun. This destabilization is often described in terms of an ideal magnetohydrodynamic instability called the torus instability. It occurs when the external magnetic field decreases sufficiently fast such that its decay index, ${n}_{}=-z\,\partial (\mathrm{ln}{B}_{})/\partial z$, is larger than a critical value, $n\gt {n}_{\mathrm{cr}}^{}$, where ${n}_{\mathrm{cr}}^{}=1.5$ for a full, large aspect ratio torus. However, when this is applied to solar MFRs, a range of conflicting values for ${n}_{\mathrm{cr}}^{}$ is found in the literature. To investigate this discrepancy, we have conducted laboratory experiments on arched, line-tied flux ropes and applied a theoretical model of the torus instability. Our model describes an MFR as a partial torus with foot points anchored in a conducting surface and numerically calculates various magnetic forces on it. This calculation yields better predictions of ${n}_{\mathrm{cr}}^{}$ that take into account the specific parameters of the MFR. Here, we describe a systematic methodology to properly translate laboratory results to their solar counterparts, provided that the MFRs have a sufficiently small edge safety factor or, equivalently, a large enough twist. After this translation, our model predicts that ${n}_{\mathrm{cr}}^{}$ in solar conditions falls near ${n}_{\mathrm{cr}}^{\mathrm{solar}}\sim 0.9$ and within a larger range of ${n}_{\mathrm{cr}}^{\mathrm{solar}}\sim (0.7,1.2)$, depending on the parameters. The methodology of translating laboratory MFRs to their solar counterparts enables quantitative investigations of CME initiation through laboratory experiments. These experiments allow for new physics insights that are required for better predictions of space weather events but are difficult to obtain otherwise.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

magnetoARPES: Angle Resolved Photoemission Spectroscopy with magnetic field control

Angle-Resolved Photoemission Spectroscopy (ARPES) is a premier technique for understanding the electronic excitations in conductive, crystalline matter, in which the induced photocurrent is collected and dispersed in energy and angle of emission to reveal the energy- and momentum-dependent single particle spectral function A (k,ω). So far, ARPES in a magnetic field has been precluded due to the need to preserve the electron paths between the sample and detector. Here, in this paper we report progress towards “magnetoARPES”, a variant of ARPES that can be conducted in a magnetic field. It is achieved by applying a microscopic probe beam (≲10 μm) to a thinned sample mounted upon a special sample holder that generates magnetic field confined to a thin layer near the sample surface. In this geometry we could produce ARPES in magnetic fields up to around ±100 mT. The magnetic fields can be varied from purely in-plane to nearly purely out-of-plane, by scanning the probe beam across different parts of the device. We present experimental and simulated data for graphene to explore the aberrations induced by the magnetic field. These results demonstrate the viability of the magnetoARPES technique for exploring symmetry breaking effects in weak magnetic fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Size- and temperature-dependent magnetization of iron nanoclusters

In this paper, the magnetic behavior of bcc iron nanoclusters, with diameters between 2 and 8 nm, is investigated by means of spin dynamics simulations coupled to molecular dynamics, using a distance-dependent exchange interaction. Finite-size effects in the total magnetization as well as the influence of the free surface and the surface/core proportion of the nanoclusters are analyzed in detail for a wide temperature range, going beyond the cluster and bulk Curie temperatures. Comparison is made with experimental data and with theoretical models based on the mean-field Ising model adapted to small clusters, and taking into account the influence of low coordinated spins at free surfaces. Our results for the temperature dependence of the average magnetization per atom M (T), including the thermalization of the transnational lattice degrees of freedom, are in very good agreement with available experimental measurements on small Fe nanoclusters. In contrast, significant discrepancies with experiment are observed if the translational degrees of freedom are artificially frozen. The finite-size effects on M (T) are found to be particularly important near the cluster Curie temperature. Simulated magnetization above the Curie temperature scales with cluster size as predicted by models assuming short-range magnetic ordering. Analytical approximations to the magnetization as a function of temperature and size are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Efficient optimization method for finding minimum energy paths of magnetic transitions

Here, efficient algorithms for the calculation of minimum energy paths of magnetic transitions are implemented within the geodesic nudged elastic band (GNEB) approach. While an objective function is not available for GNEB and a traditional line search can, therefore, not be performed, the use of limited memory Broyden–Fletcher–Goldfarb–Shanno (LBFGS) and conjugate gradient algorithms in conjunction with orthogonal spin optimization (OSO) approach is shown to greatly outperform the previously used velocity projection and dissipative Landau–Lifschitz dynamics optimization methods. The implementation makes use of energy weighted springs for the distribution of the discretization points along the path and this is found to improve performance significantly. The various methods are applied to several test problems using a Heisenberg-type Hamiltonian, extended in some cases to include Dzyaloshinskii–Moriya and exchange interactions beyond nearest neighbours. Minimum energy paths are found for magnetization reversals in a nano-island, collapse of skyrmions in two-dimensional layers and annihilation of a chiral bobber near the surface of a three-dimensional magnet. The LBFGS-OSO method is found to outperform the dynamics based approaches by up to a factor of 8 in some cases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Mixed Ligand Passivation as the Origin of Near-Unity Emission Quantum Yields in CsPbBr 3 Nanocrystals

Key features of syntheses, involving the quaternary ammonium passivation of CsPbBr 3 nanocrystals (NCs), include stable, reproducible and large (often near-unity) emission quantum yields (QYs). The archetypical example involves didodecyl dimethyl ammonium (DDDMA + ) passivated CsPbBr 3 NCs where robust QYs stem from interactions between DDDMA + and NC surfaces. Despite widespread adoption of this synthesis, specific ligand-NC surface interactions responsible for large DDDMA + -passivated NC QYs have not been fully established. Multidimensional nuclear magnetic resonance experiments now reveal a new DDDMA + -NC surface interaction, beyond established “tightly-bound” DDDMA + interactions, which strongly affects observed emission QYs. Depending upon the existence of this new DDDMA + coordination, NC QYs vary broadly between 60% and 85%. More importantly, these measurements reveal surface passivation through unexpected didodecyl ammonium (DDA + ) that works in concert with DDDMA + , to produce near unity (i.e. >90%) QYs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magnetic fly-ash geopolymer for heavy metal removal in aqueous solutions

Novel magnetic geopolymers were manufactured by synthesizing magnetic Fe 3 O 4 particles on the surface of prepared geopolymer (Method 1) or by incorporating pre-synthesized magnetic Fe 3 O 4 particles into the geopolymer during the manufacture of the geopolymer (Method 2). This study evaluated the effect of the incorporated magnetic Fe 3 O 4 on the geopolymer magnetic, physical, and adsorption properties and its separation in aqueous solutions. Based on several preliminary measurements on the synthesized magnetic geopolymers, Method 2 was found to be a better method for producing magnetic geopolymer. Magnetic geopolymer synthesized by Method 2 exhibited ferromagnetic properties comparable to that of magnetic Fe 3 O 4 , with a saturation magnetization of 8 emu·g −1 and an intrinsic coercivity of 265 Oe. The magnetic geopolymer was efficiently separated from an aqueous solution within 2 min using a 0.48-T magnetic field. In addition, the magnetic geopolymer has a maximum copper adsorption capacity of 111.1 mg·g −1 , which was similar to the non-magnetic reference geopolymer indicating that the addition of magnetic Fe 3 O 4 did not compromise the geopolymer adsorption capacity. The magnetic geopolymer is a promising material with good adsorption and separation properties that can be used for heavy metals removal and recovery in wastewater and metals separation in industrial processes.

fly ash↗
DOE OSTI2023

Structure of pressure-gradient-driven current singularity in ideal magnetohydrodynamic equilibrium

Abstract Singular currents typically appear on rational surfaces in non-axisymmetric ideal magnetohydrodynamic (MHD) equilibria with a continuum of nested flux surfaces and a continuous rotational transition. These currents have two components: a surface current (Dirac δ -function in flux surface labeling) that prevents the formation of magnetic islands, and an algebraically divergent Pfirsch–Schlüter current density when a pressure gradient is present across the rational surface. On flux surfaces adjacent to the rational surface, the traditional treatment gives the Pfirsch–Schlüter current density scaling as J ∼ 1 / Δ ι , where Δ ι is the difference of the rotational transform relative to the rational surface. If the distance s between flux surfaces is proportional to Δ ι , the scaling relation J ∼ 1 / Δ ι ∼ 1 / s will lead to a paradox that the Pfirsch–Schlüter current is not integrable. In this work, we investigate this issue by considering the pressure-gradient-driven singular current in the Hahm–Kulsrud–Taylor problem, which is a prototype for singular currents arising from resonant magnetic perturbations. We show that not only the Pfirsch–Schlüter current density but also the diamagnetic current density are divergent as ∼ 1 / Δ ι . However, due to the formation of a Dirac δ -function current sheet at the rational surface, the neighboring flux surfaces are strongly packed with s ∼ ( Δ ι ) 2 . Consequently, the singular current density J ∼ 1 / s , making the total current finite, thus resolving the paradox. Furthermore, the strong packing of flux surfaces causes a steepening of the pressure gradient near the rational surface, with ∇ p ∼ d p / d s ∼ 1 / s . In general non-axisymmetric MHD equilibrium, contrary to Grad’s conjecture that the pressure profile is flat around densely distributed rational surfaces, our result suggests a pressure profile that densely steepens around them.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Creation and observation of Hopfions in magnetic multilayer systems

Among topological solitons, magnetic skyrmions are two-dimensional particle-like objects with a continuous winding of the magnetization, and magnetic Hopfions are three-dimensional objects that can be formed from a closed loop of twisted skyrmion strings. Theoretical models suggest that magnetic Hopfions can be stabilized in frustrated or chiral magnetic systems, and target skymions can be transformed into Hopfions by adapting their perpendicular magnetic anisotropy, but their experimental verification has been elusive so far. Here, we present an experimental study of magnetic Hopfions that are created in Ir/Co/Pt multilayers shaped into nanoscale disks, known to host target skyrmions. To characterize three-dimensional spin textures that distinguish Hopfions from target skyrmions magnetic images are recorded with surface-sensitive X-ray photoemission electron microscopy and bulk-sensitive soft X-ray transmission microscopy using element-specific X-ray magnetic circular dichroism effects as magnetic contrast. These results could stimulate further investigations of Hopfions and their potential application in three-dimensional spintronics devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Plasma Surface Interactions: Predicting the Performance and Impact of Dynamic PFC Surfaces

This project focused on the development and integration of high-performance simulation tools to predict the operating behavior of Plasma-Facing Components in magnetic confinement fusion systems. A key objective at Illinois was to assess the impact of the dynamic interplay between the evolving material surface and the magnetized plasma sheath, and characterize the impact of tungsten-based PFCs on plasma contamination, including phenomena such as surface erosion, dynamic recycling of fuel species, and tritium retention, which are critical for the success of future magnetic fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

FLARE: field line analysis and reconstruction for 3D boundary plasma modeling

The FLARE code is a magnetic mesh generator that is integrated within a suite of tools for the analysis of the magnetic geometry in toroidal fusion devices. A magnetic mesh is constructed from field line segments and permits fast reconstruction of field lines in 3D boundary plasma codes such as EMC3-EIRENE. Both intrinsically non-axisymmetric configurations (stellarators) and those with symmetry breaking perturbations of an axisymmetric equilibrium (tokamaks) are supported. The code itself is written in Modern Fortran with MPI support for parallel computing, and it incorporates object-oriented programming for the definition of the magnetic field and the material surface geometry. Extended derived types for a number of different magnetohydrodynamic equilibrium and plasma response models are implemented. The core element of FLARE is a field line tracer with adaptive step-size control, and this is integrated into tools for the construction of Poincaré maps and invariant manifolds of X-points. A collection of high-level procedures that generate output files for visualization is build on top of that. The analysis modules are build with Python frontends that facilitate customization of tasks and/or scripting of parameter scans.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Laser Plasma Interaction in the MG Magnetic Field (Final Report)

Strong magnetic fields change properties of plasma. Employment of the magnetic fields can improve conditions for inertial confinement fusion. Compression and heating of the magnetized plasma is a base of the MagLIF pulsed power approach to the controlled fusion. Study of expansion and heating of plasma in the external magnetic fields, development of plasma instabilities, parametric and other effects are important for basic physics and applications. The main goal of the research for the grant was experimental investigation of laser produced plasma in the well characterized and controlled MG magnetic fields. We developed a platform for investigation of high intensity laser-plasma interaction (LPI) in the MG fields using a university-scale pulsed power machine. A Zebra machine at UNR generated transverse magnetic fields of 3 MG on the surface of the rod load and longitudinal fields of 1.4 MG in the coil loads. The magnetic fields were characterized with two-color Faraday rotation diagnostics. The pulsed power machine provided almost static magnetic fields for LPI compared to the much faster laser driven magnetic fields. We found that eddy currents in the rising magnetic field generate plasma on the metal targets. Eddy currents did not impact Si and CH dielectric targets. A Leopard laser with intensity in the focus up to 10 19 W/cm 2 produced plasma in the MG magnetic fields. The modified reflected Faraday diagnostics was used to study laser driven B-field at the MTW laser at Laboratory for Laser Energetics, UR. We demonstrated a slow dependence of the magnetic field in the coil on the applied laser intensity. The magnetic field increased by a factor of 2 if laser intensity increased by a factor of 30. This scaling is important for comparison of experiments at different laser facilities. Expansion of the plasma in the 2-3 MG external B-field was studied. Laser-produced plasma in the azimuthal magnetic field took the unique form of a thin disc expanding radially with a velocity of 250 km/s and confined in the vertical direction. A HYDRA MHD program at the University of Rochester was applied for simulations of LPI in the magnetic field B >3 MG. Simulations for the plasma disc parameters and the expansion dynamics were in a good agreement with experiments. Generation of narrow dense plasma jets in the longitudinal magnetic field of 0.6-0.8 MG was studied. Narrow plasma jets reached a length of 3-4 mm with the electron plasma density of (0.2-1.2)x10 20 cm -3 . A jet tip propagated with the velocity of 160-200 km/s. MHD simulations showed a good agreement of the dynamics of the formation of plasma jets with experiments. These jets are relevant to astrophysical jets. Simulations of K-shell spectra of Si plasma was performed for LPI in the B-field. The laser prepulse generated plasma near the laser target. A PrismSPECT model with a MeV electron beam produced by the laser was used. The spectral modelling showed the increased plasma density by a factor by 2-3 in the magnetic field. This was in agreement with the observed dynamics of the plasma plume confined by the axial magnetic field. The two-plasmon decay was studied in the 2.5-3 MG transversal magnetic fields. Strong 2-3.5 nm spectral widening and a 2-4 nm shifts of “red” and “blue” 3/2ω 0 spectral components were observed. The large shift and widening exceed the expected temperature and magnetic shift. PIC simulations are performing to clarify physics of this effect. The experimental research program for the grant is completed. New plasma effects in the MG fields were studied at the university-scale pulsed power generator. Two graduate and two undergraduate UNR and UR students carried experiments at the Zebra generator, supported and developed plasma diagnostics, provided data processing, and performed MHD simulations of LPI in the strong magnetic field. Research results are published in 9 referred papers and presented in 12 conferences. Program manager: Kramer U. Akli; Collaborators: R. C. Mancini and H. Sawada, University of Nevada, Reno (UNR); R. Betti and A. V. Maximov, University of Rochester (UR).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Manipulation of Hole Spin Transport in Germanium

Downscaling of the silicon metal-oxide-semiconductor field-effect transistor technology is expected to reach a fundamental limit soon. A paradigm shift in computing is occurring. Spin field-effect transistors are considered a candidate architecture for next-generation microelectronics. Being able to leverage the existing infrastructure for silicon, a spin field-effect transistor technology based on group IV heterostructures will have unparalleled technical and economical advantages. For the same material platform reason, germanium hole quantum dots are also considered a competitive architecture for semiconductor-based quantum technology. In this project, we investigated several approaches to creating hole devices in germanium-based materials as well as injecting hole spins in such structures. We also explored the roles of hole injection in wet chemical etching of germanium. Our main results include the demonstration of germanium metal-oxide-semiconductor field-effect transistors operated at cryogenic temperatures, ohmic current-voltage characteristics in germanium/silicon-germanium heterostructures with ferromagnetic contacts at deep cryogenic temperatures and high magnetic fields, evaluation of the effects of surface preparation on carrier mobility in germanium/silicon- germanium heterostructures, and hole spin polarization through integrated permanent magnets. These results serve as essential components for fabricating next-generation germanium-based devices for microelectronics and quantum systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Quantum Nonlinear Acoustic Hall Effect and Inverse Acoustic Faraday Effect in Dirac Insulators

Here, we propose to realize the quantum nonlinear Hall effect and the inverse Faraday effect through the acoustic wave in a time-reversal invariant but inversion broken Dirac insulator. We focus on the acoustic frequency much lower than the Dirac gap such that the interband transition is suppressed and these effects arise solely from the intrinsic valley-contrasting band topology. The corresponding acoustoelectric conductivity and magnetoacoustic susceptibility are both proportional to the quantized valley Chern number and independent of the quasiparticle lifetime. The linear and nonlinear components of the longitudinal and transverse topological currents can be tuned by adjusting the polarization and propagation directions of the surface acoustic wave. The static magnetization generated by a circularly polarized acoustic wave scales linearly with the acoustic frequency as well as the strain-induced charge density. Our results unveil a quantized nonlinear topological acoustoelectric response of gapped Dirac materials, like hexagonal boron nitride and transition-metal dichalcogenide, paving the way toward room-temperature acoustoelectric devices due to their large band gaps.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fermi surface reconstruction due to orthorhombic distortion in the Dirac semimetal YbMnSb 2

A Dirac semimetal with magnetic atoms as constituents delivers an interesting platform to investigate the interplay of Fermi surface (FS) topology, electron correlation, and magnetism. One such family of semimetals is YbMn⁢ 𝑃⁢𝑛 2 (𝑃⁢𝑛 = Sb,Bi), which is being actively studied due to the intertwined spin and charge degrees of freedom. Here, in this study, we investigate the relationship between the magnetic/crystal structures and FS topology of YbMnSb 2 using single crystal x-ray diffraction, neutron scattering, magnetic susceptibility, magnetotransport measurements, and complimentary density functional theory (DFT) calculations. Contrary to previous reports, the x-ray and neutron diffraction reveal that YbMnSb 2 crystallizes in an orthorhombic 𝑃⁢𝑛⁢𝑚⁢𝑎 structure with a notable antiphase displacement of the magnetic Mn ions that increases in magnitude upon cooling. As a result of this orthorhombicity, first-principles DFT calculation reveals a reduced Brillouin zone and more anisotropic FS of YbMnSb 2 compared to YbMnBi 2 . Moreover, the hole-type carrier density drops by two orders of magnitude as YbMnSb 2 orders antiferromagnetically, indicating band folding in a magnetic ordered state. In addition, the Landau level fan diagram yields a nontrivial nature of the Shubnikov–de Haas quantum oscillation frequency arising from the Dirac-like Fermi pocket. These results imply that YbMnSb 2 is an ideal platform to explore the interplay of subtle lattice distortion, magnetic order, and topological transport arising from relativistic quasiparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Numerical study of $\delta$-function current sheets arising from resonant magnetic perturbations

We report general three-dimensional toroidal ideal magnetohydrodynamic equilibria with a continuum of nested flux surfaces are susceptible to forming singular current sheets when resonant perturbations are applied. The presence of singular current sheets indicates that, in the presence of non-zero resistivity, magnetic reconnection will ensue, leading to the formation of magnetic islands and potentially regions of stochastic field lines when islands overlap. Numerically resolving singular current sheets in the ideal magnetohydrodynamics (MHD) limit has been a significant challenge. This work presents numerical solutions of the Hahm–Kulsrud–Taylor (HKT) problem, which is a prototype for resonant singular current sheet formation. The HKT problem is solved by two codes: a Grad–Shafranov (GS) solver and the Stepped Pressure Equilibrium Code (SPEC) code. The GS solver has built-in nested flux surfaces with prescribed magnetic fluxes. The SPEC code implements multi-region relaxed magnetohydrodynamics (MRxMHD), whereby the solution relaxes to a Taylor state in each region while maintaining force balance across the interfaces between regions. As the number of regions increases, the MRxMHD solution appears to approach the ideal MHD solution assuming a continuum of nested flux surfaces. We demonstrate agreement between the numerical solutions obtained from the two codes through a convergence study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Multi-$\mathcal{k}$ magnetic structure and large anomalous Hall effect in candidate magnetic Weyl semimetal NdAlGe

Here, the magnetic structure, magnetoresistance (MR), and Hall effect of the noncentrosymmetric magnetic semimetal NdAlGe are investigated, revealing an unusual magnetic state and anomalous transport properties that are associated with the electronic structure of this compound. The magnetization and MR measurements are both highly anisotropic and indicate an Ising-like magnetic system. The magnetic structure is complex in that it involves two magnetic ordering vectors, including an incommensurate spin density wave and commensurate ferrimagnetic state in zero field. We have discovered a large anomalous Hall conductivity that reaches ≈430 Ω –1 cm –1 , implying that it originates from an intrinsic Berry curvature effect stemming from Weyl nodes found in the electronic structure. These electronic structure calculations indicate the presence of nested Fermi surface pockets with nesting wave vectors like the measured magnetic ordering wave vector and the presence of Weyl nodes in proximity to the Fermi surface. We associate the incommensurate magnetic structure with the large anomalous Hall response to be the result of the combination of Fermi surface nesting and the Berry curvature associated with Weyl nodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗