Search NASA⌕ Search

SEARCH · Search NASA

Results for “TITANIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Oxygen-Barrier Coating for Titanium

Oxygen-barrier coating for titanium developed to provide effective and low-cost means for protecting titanium alloys from oxygen in environment when alloys used in high-temperature mechanical or structural applications. Provides protective surface layer, which reduces extent of surface oxidation of alloy and forms barrier to diffusion of oxygen, limiting contamination of substrate alloy by oxygen. Consists of submicron layer of aluminum deposited on surface of titanium by electron-beam evaporation, with submicron layer of dioxide sputtered onto aluminum to form coat.

Clark, Ronald K.↗
DOE OSTI2020

Thermal stability of oxidized ultrathin Li films on TZM for plasma facing components

For improved understanding of the behavior of Li plasma facing components (PFCs) in the presence of oxygen impurities, we report on the thermal stability of ultrathin (up to 1.0 nm) LiO x films on a titanium-zirconium-molybdenum (TZM) alloy substrate over the temperature range of 310–1400 K. LiO x films were prepared by either post-oxidation of Li films or Li films deposited on an oxygen-precovered TZM surface. Thermal stability of these films was studied using a combination of temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and low-energy ion scattering (LEIS). For post-oxidized Li films, TPD showed that no Li desorption occurred until temperatures above 620 K, and then Li desorbed from the surface via at least three desorption peaks. The O 1s XPS spectra on the post-oxidized films at 310 K indicate the formation of lithium oxide (Li2O) and peroxide/hydroxide (Li 2 O 2 /LiOH). The peroxide/hydroxide converts to oxide after heating to 680 K with no desorption of Li or O 2 , and then this film decomposes to liberate Li into the gas phase while leaving oxygen at the TZM surface. Heating the LiO x films to 1070 K led to a solid-state reaction with surface Mo atoms of the substrate to form a condensed binary lithium molybdenum oxide (LixMoOy) phase, which upon further heating decomposed to liberate gas phase binary lithium molybdenum oxide species. Li deposition on an oxygen-precovered TZM surface formed a complex, highly stable, oxygen rich, Li-O-Mo interfacial oxide. Li desorption from multilayer Li films on oxygen-precovered TZM surfaces occurred in a metallic Li multilayer peak and three other oxide-derived peaks. These results support the improved thermal stability of oxidized lithium as compared to metallic Li and have implications for Mo impurity transport into the plasma at high temperatures.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Gas-phase hydrogen permeation through alpha-titanium - Surface film and dimensional effects

The two techniques normally used to determine diffusivity and permeability in metals are considered and a description is presented of experiments which had been conducted to determine the direct effect of oxide and nitride films on the membrane surface as a function of location and thickness. The test specimens used in the experiments has been machined from commercially pure titanium rod. The results of the experiments show that hydrogen transport in alpha-titanium is partially or completely controlled by surface reactions depending upon membrane wall thickness and the composition and thickness of the surface film.

Shah, K. K.↗
DOE OSTI2026

Pseudocapacitive Titanium Oxynitride Nanowires for Ultrahigh Capacitance Supercapacitors

High-quality, multifunctional two-dimensional (2D) titanium oxynitide (TiNO) thin films and one-dimensional (1D) TiNO nanowires have been synthesized using a pulsed laser deposition, a simple, fast, and congruent evaporation method. First-principles calculations as a function of surface orientation and termination indicate that surface oxidation of TiNO nanowires can stabilize the (110) orientation observed experimentally. The specific capacitance value for the TiNO nanowire samples (2725 mF/cm 2 ) has been found to be nearly six times more than that of the TiNO thin film samples (400 mF/cm 2 ), which is attributed to the high packing density of TiNO nanowires over a given area. The nanowire samples have also been found to exhibit a significantly higher energy density (1.35 μWh/cm 2 ) than the TiNO thin-film samples (0.33 μWh/cm 2 ). Thus, the TiNO material system in thin-film and nanowire forms has been demonstrated to be a promising candidate for use as an electrode material in supercapacitors and other charge-storage applications.

capacitors↗
DOE OSTI2020

Highly Active Rutile TiO 2 Nanocrystalline Photocatalysts

The controllable synthesis of rutile TiO 2 single crystal particles with the preferential orientation of {111} facets still remains a scientific and technological challenge. Here, we developed a facile route for fabrication of rutile TiO 2 nanorod crystals (RTiO 2 NRs) having high ratios of oxidative {111} to reductive {110} surfaces. RTiO 2 NRs were synthesized using a peroxo-titanium complex (PTC) approach, which was controlled by changing the Ti/H 2 O 2 ratio. The thus obtained RTiO 2 NRs revealed a high tendency to agglomerate through orientation-dependent attachment along the {110} facets. This resulted in an increased {111}/{110} surface ratio and led to a markedly improved photocatalytic activity of RTiO 2 NR aggregates. The reported findings illustrate the rich potential of the herein proposed facile and energy-efficient synthesis of nanostructured rutile TiO 2 -based photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Valence-to-core X-ray emission spectroscopy of titanium compounds using energy dispersive detectors

X-ray emission spectroscopy (XES) of transition metal compounds is a powerful tool for investigating the spin and oxidation state of the metal centers. Valence-to-core (vtc) XES is of special interest, as it contains information on the ligand nature, hybridization, and protonation. To date, most vtc-XES studies have been performed with high-brightness sources, such as synchrotrons, due to the weak fluorescence lines from vtc transitions. Here, we present a systematic study of the vtc-XES for different titanium compounds in a laboratory setting using an X-ray tube source and energy dispersive microcalorimeter sensors. With a full-width at half-maximum energy resolution of approximately 4 eV at the Ti Kβ lines, we measure the XES features of different titanium compounds and compare our results for the vtc line shapes and energies to previously published and newly acquired synchrotron data as well as to new theoretical calculations. Finally, we report simulations of the feasibility of performing time-resolved vtc-XES studies with a laser-based plasma source in a laboratory setting. Our results show that microcalorimeter sensors can already perform high-quality measurements of vtc-XES features in a laboratory setting under static conditions and that dynamic measurements will be possible in the future after reasonable technological developments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Oxidation of n-alkanes using TS-1 and H 2 O 2 : Effects of chain length and solvents

The selective oxidation of n-C 8 H 18 , n-C 12 H 26 , n-C 16 H 34 , n-C 20 H 42 , and n-C 36 H 74 was studied with a goal of using these as models to provide insight into how to functionalize polyolefins. Reactions were carried out using a TS-1 catalyst and H 2 O 2 in a batch reactor with different cosolvents, including methanol, acetone, acetonitrile, methyl ethyl ketone, and methyl butyl ketone. Rates decreased with increasing alkane size, possibly due to the reduced solubility of larger alkanes into the water-rich phases. Cosolvents that promote the partitioning of alkanes in the aqueous phase increased the rates. 1 H NMR spectroscopy demonstrated that ketones were the primary products, although some alcohols also formed. There was preferential reaction at the 2 position in the alkanes, but reaction at central carbons was also observed. The results of this study suggest strategies for using this catalytic chemistry to functionalize polyolefins.

Alkane oxidation↗
DOE OSTI2022

Transformation of a ceramic precursor to a biomedical (metallic) alloy: Part I – sinterability of Ta 2 O 5 and TiO 2 mixed oxides

Mixed Ta 2 O 5 – TiO 2 binary system was studied by a combination of differential thermal analysis (DTA), scanning electron microscopy-energy dispersive spectrometry (SEM-EDS), X-ray diffraction (XRD) and in situ high temperature X-ray diffraction (HT-XRD) techniques. Different compositions of the mixed oxide powders were fabricated by ball–milling the powdered compositions, pelletizing the homogenized composite powders, and heating the green pellets in air at different temperatures for fixed time intervals. The sintered pellets were evaluated and characterized with respect to porosity, morphology, and phase distribution. DTA runs of the un-sintered powders indicated the onset temperatures for both exothermic and endothermic changes in the binary system. Significant amount of sintering was observed to take place at temperatures higher than 900 °C. Both room and high temperature X-ray diffraction patterns exhibited consistency in phase formation. A ternary compound (TaTiO 4 ) and a ternary solid solution (Ti 0.33 Ta 0.67 O 2 ) were observed to form in both room and high temperatures in addition to the respective binary phases (Ta 2 O 5 and TiO 2 ). A sintering temperature in the range 900–1000 °C was observed to be adequate to achieve the requisite mechanical strength and optimum internal porosity (40–48%) for subsequent electrochemical polarization experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interfacial Connections between Organic Perovskite/n + Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Abstract The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin‐film semiconductors has triggered interest in their use for direct solar‐driven water splitting to produce hydrogen. However, application of these low‐cost, electronic‐structure‐tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic‐catalyst‐electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n + silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high‐temperature annealing of the catalyst/TiO 2 ‐protected‐n + silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA 1‐x Cs x )PbI 3 system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro‐OMeTAD‐hole‐transport‐layer (HTL)‐based HOIP/n + Si solar cell, and a high photocurrent density of −15.9 mA cm −2 (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n + Si/Pt photocathode in 1 m NaOH under simulated 1‐sun illumination. While this thin‐film design creates stable interfaces, the intrinsic photo‐ and electro‐degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.

08 HYDROGEN↗
DOE OSTI2024

Morphological Modulation of TiO 2 Nanotube via Optimal Anodization Condition for Solar Water Oxidation

With the depletion of fossil fuels and the rising global demand for energy, photoelectrochemical (PEC) water splitting presents a promising solution to avert an energy crisis. Titanium dioxide (TiO 2 ), an n -type semiconductor, has gained popularity as a photoanode due to its remarkable PEC properties. Nevertheless, inherent challenges such as a wide band gap (~3.2 eV), charge recombination, and slow oxygen evolution reaction (OER) rates at the surface limit its practical application by constraining light absorption. To overcome these limitations, we have developed TiO 2 nanotubes (NTs) using a facile anodization method. This study examines the impact of anodization growth parameters on solar water oxidation performance. Specifically, TiO 2 NTs with modified anodization time (referred to as TiO 2 -6) showed a 3.5-fold increase in photocurrent density compared to the as-grown TiO 2 NTs. Furthermore, electrochemical analyses, such as electrochemical impedance spectroscopy (EIS), indicated a significant decrease in charge transfer resistance following the adjustment of on-off anodization time. Additionally, the TiO 2 -6 photoanode demonstrated a higher electrochemically active surface area (ECSA) than other samples. Therefore, optimal nanostructuring parameters are crucial for enhancing the PEC properties of TiO 2 NTs. Overall, our findings offer valuable insights for fabricating high-quality TiO 2 NTs photoanodes, contributing to developing efficient PEC systems for sustainable energy production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Predicting the Pseudocapacitive Windows for MXene Electrodes with Voltage-Dependent Cluster Expansion Models

MXene transition-metal carbides and nitrides are of growing interest for energy storage applications. These compounds are especially promising for use as pseudocapacitive electrodes due to their ability to convert energy electrochemically at fast rates. Using voltage-dependent cluster expansion models, we predict the charge storage performance of MXene pseudocapacitors for a range of electrode compositions. M 3 C 2 O 2 electrodes based on group-VI transition metals have up to 80% larger areal energy densities than prototypical titanium-based (e.g., Ti 3 C 2 O 2 ) MXene electrodes. We attribute this high pseudocapacitance to the Faradaic voltage windows of group-VI MXene electrodes, which are predicted to be 1.2 to 1.8 times larger than those of titanium-based MXenes. The size of the pseudocapacitive voltage window increases with the range of oxidation states that are accessible to the MXene transition metals. Here, by similar mechanisms, the presence of multiple ions in the solvent (Li + and H + ) leads to sharp changes in the transition-metal oxidation states and can significantly increase the charge capacity of MXene pseudocapacitors.

36 MATERIALS SCIENCE↗
NASA NTRS1971

A preliminary report on the effect of elevated temperature exposure on the mechanical properties of titanium-alloy honeycomb-core sandwich panels.

A study has been initiated to determine the effects of elevated-temperature exposure on the room-temperature mechanical properties of titanium honeycomb-core sandwich panels fabricated by brazing or spot diffusion bonding. Only flatwise tensile properties following exposure have been determined to date. Preliminary results indicate very little change in the flatwise tensile strength of sandwich panels fabricated by spot diffusion bonding following exposures of 10,000 hr at 600 and 800 F and 1000 hr at 1000 F. Titanium panels fabricated by using a Ti-Zr-Be braze alloy are susceptible to oxidation at elevated temperature and experience flatwise tensile strength degradation after continuous exposures of 7500 hr at 600 F, 1000 hr at 800 F, and less than 100 hr at 1000 F. It is possible that the exposure life of the brazed panels may be substantially increased if the panel edges are sealed to prevent oxidation of the braze alloy.

Bales, T. T.↗
NASA NTRS1977

Cost benefit study of advanced materials technology for aircraft turbine engines

The cost/benefits of eight advanced materials technologies were evaluated for two aircraft missions. The overall study was based on a time frame of commercial engine use of the advanced material technologies by 1985. The material technologies evaluated were eutectic turbine blades, titanium aluminide components, ceramic vanes, shrouds and combustor liners, tungsten composite FeCrAly blades, gamma prime oxide dispersion strengthened (ODS) alloy blades, and no coat ODS alloy combustor liners. They were evaluated in two conventional takeoff and landing missions, one transcontinental and one intercontinental.

Hillery, R. V.↗
NASA NTRS1997

Effect of Metal Alloys, Degradation Inhibitors, Temperatures on Thermal Oxidative Stability of CF3O(CF2O)(sub x)(CF2O)(sub y)CF3 Fluids

Degradation-promoting action of a series of ferrous and titanium alloys on CF3O(CF2O)(sub x)(CF2-CF2O)(sub y)CF3-based Z25 fluids and the inhibition effectiveness of several classes of additives were investigated. Four types of additives-phosphines, phosphates, phospha-s-triazines, and diphosphatetraazacyclooctatetraene-were studied in two batches of Z25 fluid, P28 and P151. In the absence of inhibitors, titanium alloys were more detrimental than the ferrous metals, but the additives were more effective in the presence of titanium alloys. Phosphate esters totally inhibited the decomposition of P151 at 330 C over 24 h in both types of alloys. The other additives were effective at lower temperatures. The responsiveness of fluid to an additive was found to be batch dependent.

Jones, William R., Jr.↗
NASA NTRS1988

Surface-catalyzed air oxidation of hydrazines: Environmental chamber studies

The surface-catalyzed air oxidation reactions of fuel hydrazines were studied in a 6500-liter fluorocarbon-film chamber at 80 to 100 ppm concentrations. First-order rate constants for the reactions catalyzed by aluminum, water-damaged aluminum (Al/Al2O3), stainless steel 304L, galvanized steel and titanium plates with surface areas of 2 to 24 sq m were determined. With 23.8 sq m of Al/Al2O3 the surface-catalyzed air oxidation of hydrazine had a half-life of 2 hours, diimide (N2H2) was observed as an intermediate and traces of ammonia were present in the final product mixture. The Al/Al2O3 catalyzed oxidation of monomethylhydrazine yielded methyldiazine (HN = NCH3) as an intermediate and traces of methanol. Unsymmetrical dimethylhydrazine gave no detectable products. The relative reactivities of hydrazine, MMH and UDMH were 130 : 7.3 : 1.0, respectively. The rate constants for Al/Al2O3-catalyzed oxidation of hydrazine and MMH were proportional to the square of the surface area of the plates. Mechanisms for the surface-catalyzed oxidation of hydrazine and diimide and the formation of ammonia are proposed.

Kilduff, Jan E.↗
DOE OSTI2023

Reliable bi-functional nickel-phosphate /TiO2 integration enables stable n-GaAs photoanode for water oxidation under alkaline condition

Abstract Hydrogen is one of the most widely used essential chemicals worldwide, and it is also employed in the production of many other chemicals, especially carbon-free energy fuels produced via photoelectrochemical (PEC) water splitting. At present, gallium arsenide represents the most efficient photoanode material for PEC water oxidation, but it is known to either be anodically photocorroded or photopassivated by native metal oxides in the competitive reaction, limiting efficiency and stability. Here, we report chemically etched GaAs that is decorated with thin titanium dioxide (~30 nm-thick, crystalline) surface passivation layer along with nickel-phosphate (Ni-Pi) cocatalyst as a surface hole-sink layer. The integration of Ni-Pi bifunctional co-catalyst results in a highly efficient GaAs electrode with a ~ 100 mV cathodic shift of the onset potential. In this work, the electrode also has enhanced photostability under 110 h testing for PEC water oxidation at a steady current density J ph > 25 mA·cm −2 . The Et-GaAs/TiO 2 /Ni-Pi║Ni-Pi tandem configuration results in the best unassisted bias-free water splitting device with the highest J ph (~7.6 mA·cm −2 ) and a stable solar-to-hydrogen conversion efficiency of 9.5%.

08 HYDROGEN↗
NASA NTRS1990

A distinct variant of high-titanium mare basalt from the Van Serg core, Apollo 17 landing site

A fragment of basalt picked from the drive tube collected at Van Serg crater at the Apollo 17 landing site has a bulk chemistry more primitive than that of other high-titanium mare basalt groups collected at the site. The sample has a fine-grained olivine phyric, subophitic texture that is distinct from that of other high-titanium basalt samples. The grain size and texture suggest that the sample has a composition close to that of a magma. The crystallization sequence, with appearance of oxide minerals later than in other groups, and other petrographic features such as more-calcic plagioclase and early pigeonite rather than augite, are consistent with this sample representing a distinct variant of Apollo 17 high-titanium basalts. It is not related through closed-system igneous processes to any of the other mare basalt groups identified among Apollo 17 samples. Its characters emphasize the complexity of contemporaneous magma processes on the moon and the heterogeneity of that part of the mantle that was melted.

Ryder, Graham↗
NASA NTRS2005

Environmental Studies on Titanium Aluminide Alloys

Titanium aluminides are attractive alternatives to superalloys in moderate temperature applications (600 to 850 C) by virtue of their high strength-to-density ratio (high specific strength). These alloys are also more ductile than competing intermetallic systems. However, most Ti-based alloys tend to degrade through interstitial embrittlement and rapid oxidation during exposure to elevated temperatures. Therefore, their environmental behavior must be thoroughly investigated before they can be developed further. The goals of titanium aluminide environmental studies at the NASA Lewis Research Center are twofold: characterize the degradation mechanisms for advanced structural alloys and determine what means are available to minimize degradation. The studies to date have covered the alpha 2 (Ti3Al), orthorhombic (Ti2AlNb), and gamma (TiAl) classes of alloys.

Brindley, William J.↗