Search NASA⌕ Search

SEARCH · Search NASA

Results for “Team X”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

GRB 980326 and GRB 980329

M. S. Briggs, G. Richardson, R. M. Kippen, and p. M. woods, University of Alabama in Huntsville, report on behalf of the BATSE team: GRB 980326 (IAUC 6851) was observed with BATSE on Mar. 26.88811 UT as trigger 6660. The event lasted about 5 s and exhibited three narrow pulses. Its peak flux (integrated over 0.5 s) and fluence (50-300 keV) are 8 x l0(exp -7) erg /sq cm sE-1 and 1 x 10(exp -6) erg/sq cm, respectively. GRB 980329 (IAUC 6853) was observed with BATSE on Mar. 29.15600 as trigger 6665; the event was very intense and lasted about 55 s, exhibiting a 10-s-long, highly structured peak. Its peak flux (integrated over 0.5 s) and fluence (50-300 keV) are 8 x 10(exp -6) erg/ sq cm sE-1 and 5 x l0(exp -5) erg/ sq cm, respectively. The BATSE locations are consistent with the locations of the reported optical transient for GRB 980326 (IAUC 6852) and the SAX/NFI x-ray counterpart for GRB 980329 (IAUC 6854). Location maps can be found at http://www.batse.msfc.nasa.gov/-kippen/batsebr.

Briggs, Michael S.↗
NASA NTRS1999

Constellation-X Spectroscopy X-Ray Telescope Requirements and Development Program: MSFC Research Program

The Constellation-X Spectroscopy X-ray Telescope (SXT) will provide high-throughput, high-resolution spectroscopy of cosmic sources, from 0.25 keV to 10 keV. Key to this capability is the development of large (1.6 m diameter), lightweight optics for the SXT mirror assembly. Teams led by NASA's Marshall Space Flight Center (MSFC), by NASA's Goddard Space Flight Center (GSFC), and by Italy's Osservatorio Astronomico di Brera (OAB) are currently developing competing mirror technologies for this planned mission. Each team is making significant research progress in developing mirror technologies which satisfy the SXT requirements for lightweight optics, consistent with a system-level optical performance of better than 15 arcsec half-power diameter. The NASA Marshall Space Flight Center (MSFC), in collaboration with the Smithsonian Astrophysical Observatory (SAO), has focussed its efforts on full-shell replicated optics, of electroformed nickel alloys. Recent progress in identifying a surface treatment to effect low, controlled adhesion and, more significantly, in developing new high-strength nickel alloys make this a viable, low cost approach to satisfying the SXT requirements.

O'Dell, S. L.↗
NASA NTRSDate not supplied

ATD-2 Digital Services / DIP

The path to NAS-wide implementation for ATD-2 multi-airport IADS is as a digital service for flight operators that builds on and supplements FAA TBO investments. This session will focus on a suite of Machine Learning (ML) services the ATD-2 team developed to model airport surface operations. The approach used to leverage SWIM data sets will be described and a preliminary analysis of ML model accuracy will be presented. NASA’s plans to build on this work under the ATM-X Digital Information Platform (DIP) sub-project will be discussed.

ATD TIM, ATD-2 Digital Services, DIP↗
NASA NTRS2011

Contributions to Climate Research Using the AIRS Science Team Version-5 Products

This paper compares recent spatial anomaly time series of OLR (Outgoing Longwave Radiation) and OLRCLR (Clear Sky OLR) as determined using CERES and AIRS observations over the time period September 2002 through June 2010. We find excellent agreement in OLR anomaly time series of both data sets in almost every detail, down to the 1 x 1 spatial grid point level. This extremely close agreement of OLR anomaly time series derived from observations by two different instruments implies that both sets of results must be highly stable. This agreement also validates to some extent the anomaly time series of the AIRS derived products used in the computation of the AIRS OLR product. The paper then examines anomaly time series of AIRS derived products over the extended time period September 2002 through April 2011. We show that OLR anomalies during this period are closely in phase with those of an El Nino index, and that recent global and tropical mean decreases in OLR and OLR(sub CLR) are a result of a transition from an El Nino condition at the beginning of the data record to La Nina conditions toward the end of the data period. This relationship can be explained by temporal changes of the distribution of mid-tropospheric water vapor and cloud cover in two spatial regions that are in direct response to El Nino/La Nina activity which occurs outside these spatial regions

Susskind, Joel↗
NASA NTRS2018

Food Sanitation Device for Use in Microgravity

EDEN is a transportation/orbital habitat that carries large amounts of crew members, food, and supplies from Earth to Mars and back, but can also act as a permanent, simulated-1g-environment space station in Martian orbit. The focus of the project is to create a temporary, but long-term living environment that focuses on human health and food production. The project is composed of four major habitable parts (in addition to other major components). Moving from the center out, the first is a central core that acts as a hub that connects to the structural spokes, the main propulsion rockets and serves as a place for other spacecraft to dock onto, in addition to housing some of the basic station control, navigation and automated computer systems. The second set of parts are the spokes that connect the ring to the central core; these are the primary structural components with elevators in the middle carrying people from the ring to the core. The ‘lower’ portions, near the ring and it’s 1g environment, also act as storage centers. The third part is the 2-story outer ring This project served as an engineering senior design project at Temple University, and as part of NASA’s eXploration and Habitation (X-Hab) 2018 Academic Innovation Challenge. The goal of the project was to design, construct, and test a device which would be used in microgravity to sanitize produce. This is part of a NASA’s effort to grow and sanitize fresh produce on the International Space Station (ISS), in order to provide more nutritious meal options to the astronauts. Our team designed a 3-D printed spherical device with UV-C LEDs lining the interior. The designed device consists of an 8” spherical chamber, 10 UV-C LEDs, and a touchscreen user interface to control the device. Our design meets the project requirements by offering several features: a simple user interface, minimal crew time to operate, no waste produced, and the ability to sanitize multiple types of produce. The main reductions in Salmonella bacteria and Aspergillus Flavus mold were not verified. However, the aerobic plate count requirement was greatly exceeded and validated. Testing of the device resulted in visual results confirming significant decrease in E. coli activity with increased UV-C exposure, as well as quantitative results confirming significant reduction in CFU/g for the aerobic plate count. These reductions achieved from 1.464 x 10 7 to 2 x 10 4 CFU/g (2.86 log reduction) after 5 minutes, were significantly more than the requirements given by NASA ( of the craft, which holds all of the food production along with medical bays, a control center and a few parks. This ring also integrates the rigid keystone modules, which are the interface between the spokes, the expandable-construction portions of the ring and the habitation pods. The keystone modules also incorporate redundant, distributed ECLSS systems, medical storage, airlocks, and other integral station functions. The last parts are the habitation pods; these hold the sleeping quarters along with the bathrooms, showers, kitchen space and lounge areas. These expandable modules latch onto the keystone modules of the ring, which serves as a circulatory link between the different habitation pods.

Damien Gordon↗
NASA NTRS2000

BOREAS TE-23 Map Plot Data

The Boreal Ecosystem-Atmospheric Study (BOREAS) TE-23 (Terrestrial Ecology) team collected map plot data in support of its efforts to characterize and interpret information on canopy architecture and understory cover at the BOREAS tower flux sites and selected auxiliary sites from May to August 1994. Mapped plots (typical dimensions 50 m x 60 m) were set up and characterized at all BOREAS forested tower flux and selected auxiliary sites. Detailed measurement of the mapped plots included: (1) stand characteristics (location, density, basal area); (2) map locations diameter at breast height (DBH) of all trees; (3) detailed geometric measures of a subset of trees (height, crown dimensions); and (4) understory cover maps. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Rich, Paul M.↗
NASA NTRS2002

XTE Observations of Intermediate Polars: RXTE TOO Observations of Supernovae

Two intermediate polar cataclysmic variables, PQ Gem and AO Psc, were observed jointly with the Rossi X-ray Timing Explorer (RXTE) and ground-based photometry. The analysis of intermediate polars (IPs) is complex because these objects exhibit light curves that behave differently as a function of energy and that behave differently when phased on the orbital or on the spin periods. The presence of two periods in one system is essentially equivalent to analyzing two different X-ray sources. A preliminary analysis of the PQ Gem data was carried out and presented at the Annapolis Workshop on Magnetic Cataclysmic Variables. The final analysis of the data were held up by problems with the background estimation. The RXTE PCA team has released a new version of the background estimator. The PQ Gem must be reanalyzed using the new background. We have also installed a spectral model that calculates the expected emission from an accretion column. That model is undergoing final testing before we apply it to the data.

Schlegel, E.↗
NASA NTRS2007

STS-114 Micrometeoroid/Orbital Debris (MMOD) Post-Flight Assessment

NASA Johnson Space Center (JSC) personnel assisted Kennedy Space Center (KSC) inspection teams in the identification of 41 micrometeoroid/orbital debris (MMOD) impact sites on the OV-103 vehicle (Discovery) during STS-114 postflight inspections. There were 14 MMOD impacts reported on the crew module windows (Figure 1). The largest impact feature, a 6.6 mm x 5.8 mm crater on window #4, was caused by a particle with an estimated diameter of 0.22 mm (Figure 2). This impact was among the largest ever recorded on a crew module window. The window was removed and replaced. Scanning Electron Microscope/Energy Dispersive X-ray (SEM/EDX) analysis of dental mold samples from the impact site to determine particle origin was inconclusive, possibly due to contamination picked up on the ferry flight from Edwards Air Force Base to KSC. The radiators on the inside of the payload bay doors sustained 19 impacts (Figure 3) with one of the impacts causing a face sheet perforation. The 0.61 mm diameter hole was produced by a particle with an estimated diameter of 0.4 mm, which approaches the 0.5-mm critical particle diameter of the wing leading edge reinforced carbon-carbon (RCC) panel high-temperature regions (Zone 3, Figure 4) that was established during Return to Flight testing of the RCC panels. An inspection of the payload bay door exterior insulation (FRSI) revealed a 5.8 mm x 4.5 mm defect that was caused by an MMOD particle with unknown composition, as the sample obtained was contaminated. Figure 5 provides a summary of the exterior surface survey that was conducted following the STS-114 mission. Two windows were removed and replaced due to hypervelocity impact. Nineteen impacts were recorded on the payload bay door radiators, with one face sheet penetration. Three impact sites were identified on the FRSI. There were four hypervelocity impact sites detected on the wing leading edge RCC panels. One impact was detected on the top cover of the TPS sample box (TSB) payload that was mounted on a carrier in the aft portion of the payload bay.

Hyde, J.↗
NASA NTRS2009

Propelling Exploration to the Moon and Beyond

As the Constellation Program enters its fourth year, the Ares Projects have made substantial progress toward sending human explorers beyond Earth orbit. The Ares I crew launch vehicle, which will take six astronauts or cargo to the International Space Station or four astronauts to rendezvous with Ares V for missions to the Moon, is the first human-rated vehicle NASA has developed in over 30 years. Since the Exploration Systems Architecture Study in 2005, the Ares Projects have completed a successful system requirements review, system definition review, and preliminary design review for the Ares I crew launch vehicle. The Ares I elements are well into development, beginning with the Shuttle-derived, five-segment solid rocket motor that will provide first-stage propulsion. The first stage team has poured its first production simulation article motor and will be pouring and firing the first five-segment development motor in 2009. Large-scale tooling has been installed and tested to produce propellant tanks for the liquid-fuel upper stage at Marshall Space Flight Center (MSFC) in Alabama. The initial upper stage units and main propulsion test article will be manufactured and tested at MSFC before transferring to Michoud Assembly Facility in Louisiana. The upper stage engine team has completed powerpack testing using Apollo J-2 heritage hardware and begun construction of a new altitude test stand at Stennis Space Center in Mississippi. The flight and integrated testing group has designed and built hardware for the Ares I-X test flight scheduled for 2009, as well as begun refurbishing existing infrastructure to support ground testing. Additionally, a base configuration has been selected for the Ares V cargo launch vehicle, which will send the Altair lunar lander and Orion to the Moon. Today, the Ares Projects are well on the way to building America s next generation of exploration-capable launch vehicles.

Cook, Stephen A.↗
NASA NTRS2009

Pulsed Airborne Lidar Measurements of Atmospheric CO2 Column Absorption and Line Shapes from 3-13 km Altitudes

We have developed a lidar technique for measuring the tropospheric C02 concentrations as a candidate for NASA's planned ASCENDS mission. Our technique uses two pulsed laser transmitters allowing simultaneous measurement of a C02 absorption line in the 1570 nm band, 02 extinction in the Oxygen A-band and surface height and backscatter. The lidar measures the energy and time of flight of the laser echoes reflected from the atmosphere and surface. The lasers are stepped in wavelength across the C02 line and an 02 line region during the measurement. The receiver uses a telescope and photon counting detectors, and measures the background light and energies of the laser echoes from the surface along with scattering from any aerosols in the path. The gas extinction and column densities for the C02 and 02 gases are estimated from the ratio of the on- and off- line signals via the DIAL technique. Time gating is used to isolate the laser echo signals from the surface, and to reject laser photons scattered in the atmosphere. We have developed an airborne lidar to demonstrate the C02 measurement from the NASA Glenn Lear 25 aircraft. The airborne lidar steps the pulsed laser's wavelength across a selected C02 line with 20 steps per scan. The line scan rate is 450 Hz and laser pulse widths are I usec. The time resolved laser backscatter is collected by a 20 cm telescope, detected by a photomultiplier and is recorded by a photon counting system. We made initial airborne measurements on flights during October and December 2008. Laser backscatter and absorption measurements were made over a variety of land and water surfaces and through thin and broken clouds. Atmospheric C02 column measurements using the 1571.4, 1572.02 and 1572.33 nm C02 lines. Two flights were made above the DOE SGP ARM site at altitudes from 3-8 km. These nights were coordinated with DOE investigators who Hew an in-situ C02 sensor on a Cessna aircraft under the path. The increasing C02 line absorptions with altitudes were evident and comparison with in-situ measurements showed agreements to 6 ppm. This spring we improved the aircraft's nadir window. During July and August 2009 we made 9 additional 2 hour long flights and measured the atmospheric C02 absorption and line shapes using the 1572.33 nm C02 line. Measurements were made at stepped altitudes from 3-13 km over a variety of surface types in Nebraska, Illinois, the SGP ARM site, and near and over the Chesapeake Bay in North Carolina and Virginia. Strong laser signals and clear line shapes were observed at all altitudes, and some measurements were made through thin clouds. The flights over the ARM site were underflown with in-situ measurements made from the DOE Cessna. The Oklahoma and east coast t1ights were coordinated with a LaRC/ITT C02 lidar on the LaRC UC-12 aircraft, a LaRC in~situ C02 sensor, and the Oklahoma flights also included a JPL C02 lidar on a Twin Otter aircraft. Ed Browell and Gary Spiers led the LaRC and JPL teams. More details of the t1ights, measurements and analysis will be described in the presentation.

Abshire, J. B.↗
NASA NTRS2013

Microchemical and Structural Evidence for Space Weathering in Soils from Asteroid Itokawa

The chemistry, microstructure and optical properties of grains on the surfaces of airless bodies are continu-ously modified due to their interactions predominantly with solar energetic ions and micrometeorite impacts. Collectively known as space weathering, this phenomenon results in a discrepancy between remotely sensed spectra from asteroids and those ac-quired directly from meteorites. The return of pristine samples from the asteroid Itokawa provides insight into surface processes on airless bodies and will help in correlating remote sensing data with laboratory analysis of meteorites. Samples and Methods: We examined Itokawa samples RA-QD02-0042-01 and RA-QD-02-0042-02, ultramicrotomed sec-tions of a singular grain prepared by the Hayabusa sample cura-tion team. We analyzed these slices using a 200 keV JEOL 2010F transmission electron microscope (TEM) at Arizona State Uni-versity and a 200 keV JEOL 2500SE TEM at NASA JSC. Both field emission TEMs are equipped with energy-dispersive X-ray spectrometers (EDS) and scanning TEM (STEM) detectors. Results and Discussion: TEM observations reveal that the sectioned grain predominantly consists of a single crystal of low-Ca orthopyroxene, with subsidiary smaller regions of olivine, Fe-Ni sulfide, and Fe-Ni metal. EDS-spectrum imaging and high-resolution TEM (HRTEM) show local, nanocrystalline regions of the outermost 2 to 5 nm of the pyroxene are composed of an Fe-Mg-S-rich and Si- and O-depleted layer that is underlain by a 2- to 5-nm thick amorphous zone enriched in Si. These layers occur in multiple microtome slices and have uniform thicknesses. We also observe localized 'islands' of material on the surface of the pyroxene which HRTEM imaging indicates are amorphous and EDS measurements show are compositionally heterogeneous. A 10- to 60-nm thick partially amorphous zone occurs below the compositionally distinct rim. While this this zone is associated with the compositionally heterogeneous outer layer, it also occurs as a local stand-alone feature on the exterior rim of the grain. Ar-eas of the pyroxene grain rim also exhibit a vesicular texture. The TEM data indicate a complex history of space weather-ing for samples RA-QD02-0042-01 and -02. The outermost layer of nanocrystalline material with varied composition is consistent with previously suggested [3-4] chemical and structural pro-cessing by solar wind ions, with a possible additional role for im-pact vapor deposition [3-4]. The amorphous and compositionally distinct islands on the surface of this grain, similar to lunar glasses, suggest formation through vapor deposition via micrometeor-ite impact events. In comparison, the amorphization and vesicula-tion textures are likely a product of radiation damage from the solar wind. The depth and degree of amorphization, in conjunction with model calculations, will help provide an upper limit on exposure time for these particles.

Thompson, M. S.↗
NASA NTRSDate not supplied

Mineralogy of the Greenheugh Pediment and Underlying Murray Formation from the Mars Science Laboratory CheMin Instrument

The Mars Science Laboratory Curiosity rover has been investigating a sequence of ancient fluvio-lacustrine and eolian units in Gale crater. For much of the mission, Curiosity has studied the fluvio-lacustrine deposits of the Murray formation. Curiosity has also studied the ancient eolian Stimson formation in a few locations, which unconformably overlies the Murray fm. The Stimson formation was previously studied at the Naukluft and Emerson Plateaus and recently studied at the Greenheugh pediment capping unit. The Curiosity science team also investigated the Murray formation directly underlying the pediment. Curiosity drilled the “Edinburgh” target within the pediment capping unit and the “Hutton” target in the Murray formation near the contact with the pediment and delivered these materials to the CheMin X-ray diffractometer to characterize bulk mineralogy. Edinburgh contains abundant plagioclase, pyroxene, magnetite, olivine, and X-ray amorphous materials, with 10 wt.% smectite and minor sanidine. The mineralogy of the Stimson at Greenheugh is distinct from the mineralogy of the Stimson at Naukluft and Emerson because previous Stimson targets did not contain olivine or clay minerals. This suggests sediments in the pediment may have a different source and/or different aqueous alteration history than those from Naukluft and Emerson. Hutton contains abundant plagioclase, pyroxene, magnetite, and X-ray amorphous materials, 6 wt.% smectite, and minor cristobalite, opal-CT, sanidine, hematite, fluorapatite, and anhydrite. Other Murray targets in the surrounding Glen Torridon region that are farther from the pediment contact contain ~30 wt.% smectite and lack cristobalite and opal-CT. Cristobalite and/or opal-CT are present in a few other targets elsewhere along the traverse, including the top of the nearby Vera Rubin ridge and the top of the Pahrump Hills outcrop. Stimson overlies the Pahrump Hills, and, based on projections of the pediment slope, the Stimson may have overlain Vera Rubin ridge. The proximity of the low-smectite and cristobalite- and/or opal-CT-bearing outcrops to the contact between the Murray and Stimson suggests the contact provided a conduit for diagenetic fluids that altered clay minerals and formed crystalline and paracrystalline silica.

E. B. Rampe↗
NASA NTRS1998

Comparative Analysis of Thaumatin Crystals Grown on Earth and in Microgravity

The protein thaumatin was studied as a model macromolecule for crystallization in microgravity environment experiments conducted on two U.S. Space Shuttle missions (second United States Microgravity Laboratory (USML-2) and Life and Microgravity Spacelab (LMS)). In this investigation we evaluated and compared the quality of space- and Earth-grown thaumatin crystals using x-ray diffraction analysis and characterized them according to crystal size, diffraction resolution limit, and mosaicity. Two different approaches for growing thaumatin crystals in the microgravity environment, dialysis and liquid-liquid diffusion, were employed as a joint experiment by our two investigative teams. Thaumatin crystals grown under a microgravity environment were generally larger in volume with fewer total crystals. They diffracted to significantly higher resolution and with improved diffraction properties as judged by relative Wilson plots. The mosaicity for space-grown crystals was significantly less than for those grown on Earth. Increasing concentrations of protein in the crystallization chambers under microgravity lead to larger crystals. The data presented here lend further support to the idea that protein crystals of improved quality can be obtained in a microgravity environment.

Ng, Joseph D.↗
NASA NTRS2004

Self-Gravity Modeling for LISA

The Laser Interferometer Space Antenna (LISA) mission, a space based gravitational wave detector, uses laser metrology to measure distance fluctuations between proof masses aboard three spacecraft. The total acceleration disturbance to each proof mass is required to be below 3 x 10(exp 15) m/sq square root of Hz. Self-gravity noise due to spacecraft distortion and spacecraft motion is expected to be a significant contributor to the acceleration noise budget. To minimize these effects, the gravitational field at each proof mass must be kept as small, flat, and constant as possible. It is estimated that the static field must be kept below 5 x 10(exp -10) m/sq s with a gradient below 3 x 10(exp -8)/sq s in order to meet the required noise levels. Most likely it will not be possible to directly verify by measurements that the LISA spacecraft meets these requirements; they must be verified by models. The LISA Integrated Modeling team developed a new self-gravity tool that calculates the gravitational forces and moments on the proof masses to aid in the design and verification of the LISA spacecraft. We present here an overview of&e tool and the latest self-gravity results calculated using the current baseline design of LISA. We also present results of a self-gravity analysis of the ST-7 DRS package that will fly on the LISA Pathfinder mission.

Merkowitz, Stephen↗
NASA NTRS2005

First Results from the Swift Gamma Ray Burst Mission

Swift is now in orbit after a beautiful launch on November 20, 2004. It is a multiwavelength observatory designed specifically to study the fascinating gamma-ray bursts. The goals are to determine the origin of bursts and use them to probe the early Universe. A new-technology wide-field gamma-ray camera detects more than a hundred bursts per year. Sensitive narrow-field X-ray and UV/optical telescopes are pointed at the burst location in 20 to 70 sec by an autonomously controlled "swift" spacecraft. For each burst, arcsec positions are determined and optical/UV/X-ray/gamma-ray spectrophotometry performed. Information is also rapidly sent to the ground to a team of more than 50 observers at telescopes around the world. First results from the mission will be presented, including observations of bright GRBs, faint GRBs, short GRBs and a super-giant flare from the soft gamma repeater SGRl806-20.

Gehreis, Neil↗
NASA NTRS2016

NASA's Physics of the Cosmos and Cosmic Origins Technology Development Programs

The strategic astrophysics missions of the coming decades will help answer the questions "How did our universe begin and evolve?" and "How did galaxies, stars, and planets come to be?" Enabling these missions requires advances in key technologies far beyond the current state of the art. NASA's Physics of the Cosmos (PCOS) and Cosmic Origins (COR) Program Offices manage technology maturation projects funded through the Strategic Astrophysics Technology (SAT) program to accomplish such advances. The PCOS and COR Program Offices, residing at the NASA Goddard Space Flight Center (GSFC), were established in 2011, and serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the Programs' technology development activities and the current technology investment portfolio of 23 technology advancements. We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The Programs' priorities are driven by strategic direction from the Astrophysics Division, which is informed by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) 2010 Decadal Survey report [1], the Astrophysics Implementation Plan (AIP) [2] as updated, and the Astrophysics Roadmap "Enduring Quests, Daring Visions" [3]. These priorities include technology development for missions to study dark energy, gravitational waves, X-ray and inflation probe science, and large far-infrared (IR) and ultraviolet (UV)/optical/IR telescopes to conduct imaging and spectroscopy studies. The SAT program is the Astrophysics Division's main investment method to mature technologies that will be identified by study teams set up to inform the 2020 Decadal Survey process on several large astrophysics mission concepts.

SPIE paper↗
NASA NTRS1999

Information Flow in the Launch Vehicle Design/Analysis Process

This paper describes the results of a team effort aimed at defining the information flow between disciplines at the Marshall Space Flight Center (MSFC) engaged in the design of space launch vehicles. The information flow is modeled at a first level and is described using three types of templates: an N x N diagram, discipline flow diagrams, and discipline task descriptions. It is intended to provide engineers with an understanding of the connections between what they do and where it fits in the overall design process of the project. It is also intended to provide design managers with a better understanding of information flow in the launch vehicle design cycle.

Humphries, W. R., Sr.↗
NASA NTRS2010

The Kepler Full Frame Images

NASA's exoplanet discovery mission Kepler provides uninterrupted 1-min and 30-min optical photometry of a 100 square degree field over a 3.5 yr nominal mission. Downlink bandwidth is filled at these short cadences by selecting only detector pixels specific to 105 preselected stellar targets. The majority of the Kepler field, comprising 4 x 10(exp 6) m_v < 20 sources, is sampled at much lower 1-month cadence in the form of a full-frame image. The Full Frame Images (FFIs) are calibrated by the Science Operations Center at NASA Ames Research Center. The Kepler Team employ these images for astrometric and photometric reference but make the images available to the astrophysics community through the Multimission Archive at STScI (MAST). The full-frame images provide a resource for potential Kepler Guest Observers to select targets and plan observing proposals, while also providing a freely-available long-cadence legacy of photometric variation across a swathe of the Galactic disk.

Dotson, Jessie L.↗