Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature Gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Parallel magnetic field perturbations in gyrokinetic simulations

At low beta it is common to neglect parallel magnetic field perturbations on the basis that they are of order beta{sup 2}. This is only true if effects of order beta are canceled by a term in the nablaB drift also of order beta[H. L. Berk and R. R. Dominguez, J. Plasma Phys. 18, 31 (1977)]. To our knowledge this has not been rigorously tested with modern gyrokinetic codes. In this work we use the gyrokinetic code GS2[Kotschenreuther et al., Comput. Phys. Commun. 88, 128 (1995)] to investigate whether the compressional magnetic field perturbation B{sub ||} is required for accurate gyrokinetic simulations at low beta for microinstabilities commonly found in tokamaks. The kinetic ballooning mode (KBM) demonstrates the principle described by Berk and Dominguez strongly, as does the trapped electron mode, in a less dramatic way. The ion and electron temperature gradient (ETG) driven modes do not typically exhibit this behavior; the effects of B{sub ||} are found to depend on the pressure gradients. The terms which are seen to cancel at long wavelength in KBM calculations can be cumulative in the ion temperature gradient case and increase with eta{sub e}. The effect of B{sub ||} on the ETG instability is shown to depend on the normalized pressure gradient beta{sup '} at constant beta.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature distribution in a laser-heated diamond anvil cell as described by finite element analysis

Finite element analysis (FEA) is a powerful tool for numerically solving partial differential equations over complex geometries and is thus useful for analyzing heat transport in laser-heated diamond anvil cell (LHDAC) experiments. Our models expand on previously published simulations by calculating the volume-averaged temperatures of both the sample and insulation/pressure media under steady-state heating to determine the thermal pressure of the hot sample. Our goal is to produce an accurate relationship between the measured surface temperature of the absorbing sample and the temperature of the transparent insulating media, which is used to determine thermal pressure but susceptible to steep temperature gradients. We find that in doing so, our FEA models of temperature within the pressure/insulation media can differ from simplified estimates of temperature gradients by more than a factor of 2. We also explore temperature-dependent and temperature-independent thermal conductivity models and find that the volume-averaged temperatures differ by up to a factor of 1.3, forcing the predicted thermal pressures determined to also differ by up to a factor of 1.5 at a temperature of 2000 K at 50 GPa for neon. Higher temperatures exacerbate this difference. We also find that unintentional asymmetric sample insertion and sample heating, which are common in LHDAC experiments, do not have a first-order effect on volume-averaged temperatures. The FEA models, available in both Python and FlexPDE, are versatile across different sample geometries, materials, and heat source laser shapes.

Farah, Frederick↗

Dependence of Uranium Oxide Polymorphism on Plasma Synthesis Conditions

Here, we synthesized uranium oxide nanoparticles using a plasma flow reactor (PFR) and studied the effects of three different experimental parameters on the resulting morphologies and speciation of the particles: (1) collection duration, (2) collection substrate temperature, and (3) radial collection position due to radial temperature gradients in the PFR. We also induced three distinct temperature histories along the axis of the plasma flow reactor by varying the gas flow rates downstream of the plasma torch. Transmission electron microscopy (TEM) analyses of collected particles showed two phases of uranium oxides (fcc-UO 2 and α-UO 3 ). The chemical compositions of the resulting uranium oxide particles were not altered by the three parameters investigated in this work but varied based on the temperature history induced. Preheating of the collection substrate led to deposition of fewer particles, which is attributed to a reduction in thermophoretic force caused by the reduced temperature gradient for preheated substrates. The relative amounts of UO 2 to UO 3 and particle size varied depending on the cooling history employed during synthesis.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Preserving monotonicity in anisotropic diffusion

We show that standard algorithms for anisotropic diffusion based on centered differencing (including the recent symmetric algorithm) do not preserve monotonicity. In the context of anisotropic thermal conduction, this can lead to the violation of the entropy constraints of the second law of thermodynamics, causing heat to flow from regions of lower temperature to higher temperature. In regions of large temperature variations, this can cause the temperature to become negative. Test cases to illustrate this for centered asymmetric and symmetric differencing are presented. Algorithms based on slope limiters, analogous to those used in second order schemes for hyperbolic equations, are proposed to fix these problems. While centered algorithms may be good for many cases, the main advantage of limited methods is that they are guaranteed to avoid negative temperature (which can cause numerical instabilities) in the presence of large temperature gradients. In particular, limited methods will be useful to simulate hot, dilute astrophysical plasmas where conduction is anisotropic and the temperature gradients are enormous, e.g., collisionless shocks and disk-corona interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodiffusion in concentrated ferrofluids: Experimental and numerical results on magnetic thermodiffusion

Ferrofluids consist of magnetic nanoparticles dispersed in a carrier liquid. Their strong thermodiffusive behaviour, characterised by the Soret coefficient, coupled with the dependency of the fluid's parameters on magnetic fields is dealt with in this work. It is known from former experimental investigations on the one hand that the Soret coefficient itself is magnetic field dependent and on the other hand that the accuracy of the coefficient's experimental determination highly depends on the volume concentration of the fluid. The thermally driven separation of particles and carrier liquid is carried out with a concentrated ferrofluid (φ = 0.087) in a horizontal thermodiffusion cell and is compared to equally detected former measurement data. The temperature gradient (1 K/mm) is applied perpendicular to the separation layer. The magnetic field is either applied parallel or perpendicular to the temperature difference. For three different magnetic field strengths (40 kA/m, 100 kA/m, 320 kA/m) the diffusive separation is detected. It reveals a sign change of the Soret coefficient with rising field strength for both field directions which stands for a change in the direction of motion of the particles. This behaviour contradicts former experimental results with a dilute magnetic fluid, in which a change in the coefficient's sign could only be detected for the parallel setup. An anisotropic behaviour in the current data is measured referring to the intensity of the separation being more intense in the perpendicular position of the magnetic field: S{sub T‖} = −0.152 K{sup −1} and S{sub T⊥} = −0.257 K{sup −1} at H = 320 kA/m. The ferrofluiddynamics-theory (FFD-theory) describes the thermodiffusive processes thermodynamically and a numerical simulation of the fluid's separation depending on the two transport parameters ξ{sub ‖} and ξ{sub ⊥} used within the FFD-theory can be implemented. In the case of a parallel aligned magnetic field, the parameter can be determined to ξ{sub ‖} = (2.8; 9.1; 11.2) × 10{sup −11} · D{sub ‖} kg/(A{sup 2}m) for the different field strengths and in dependence on the magnetic diffusion coefficient D{sub ‖}. An adequate fit in the perpendicular case is not possible, by ξ{sub ⊥} = 1 × 10{sup −17} kg/(Am{sup 2}) a rather good agreement between numerical and experimental data can be found for a field strength of 40 kA/m, a change in the coefficient's sign in the perpendicular setup is not numerically determinable via this theory. The FFD-theory is only partly applicable to calculate the concentration profile in concentrated magnetic fluids established due to a temperature gradient and magnetic field applied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

[Presentation Slides] Code-to-Code Benchmark Study for Thermal Stress Modeling and Preliminary Analysis of the High-temperature Single Heat-Pipe Experiment

In the heat-pipe-cooled microreactor, heat pipes remove heat from the reactor core as a passive heat-transfer device, so the fluid circulation is not required for cooling, which can substantially simplify the overall reactor design. However, given the extremely high temperatures in the core region and potentially large temperature gradients across the structure materials, thermal stresses need to be well-analyzed to ensure structural integrity during normal operations and accident scenarios. This presentation slides discuss finite element method-based thermal-stress analysis for the high-temperature single heat-pipe test article in the Single Primary Heat Extraction and Removal Emulator (SPHERE) facility at Idaho National Laboratory (INL), using two commercial software packages, Abaqus and Star-CCM+. A code-to-code benchmark study was performed to crosscheck the model setup and capability of each code and to gain preliminary insights into the potential thermal stress concerns from the current experimental setup. It is observed the significant thermal stresses happen at the inner surface of the heat pipe hole surrounded by electric heaters where the largest temperature gradients appear. The temperature fields have good agreements between Abaqus and Star-CCM+, while the induced thermal stresses show modest deviations probably due to differences of meshing engines used in these two codes. It is found that the local maximum thermal stresses may reach close to the ultimate tensile strength and yield strength of structural material depending on the heater power. Ultimately, the coupled thermal-structural analysis will help guide the current experimental plan and ensure the facility safety for future experimental study.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Finite ion temperature effects on scrape-off layer turbulence

Ion temperature has been measured to be of the same order, or higher, than the electron temperature in the scrape-off layer (SOL) of tokamak machines, questioning its importance in determining the SOL turbulent dynamics. Here, we present a detailed analysis of finite ion temperature effects on the linear SOL instabilities, such as the resistive and inertial branches of drift waves and ballooning modes, and a discussion of the properties of the ion temperature gradient (ITG) instability in the SOL, identifying the η{sub i}=L{sub n}/L{sub T{sub i}} threshold necessary to drive the mode unstable. The non-linear analysis of the SOL turbulent regimes by means of the gradient removal theory is performed, revealing that the ITG plays a negligible role in limited SOL discharges, since the ion temperature gradient is generally below the threshold for driving the mode unstable. It follows that the resistive ballooning mode is the prevailing turbulence regime for typical limited SOL parameters. The theoretical estimates are confirmed by non-linear flux-driven simulations of SOL plasma dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microtearing Modes in Reversed Field Pinch Plasmas

In the reversed field pinch RFX-mod strong electron temperature gradients develop when the single-helical-axis regime is achieved. Gyrokinetic calculations show that in the region of the strong temperature gradients microtearing instabilities are the dominant turbulent mechanism acting on the ion Larmor radius scale. The quasilinear evaluation of the electron thermal conductivity is in good agreement with the experimental estimates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling evaporative thermocapillary convection using external heating: An experimental investigation

An experimental study has been undertaken to investigate evaporatively driven convection underneath a meniscus (liquid-vapour interface) formed in a vertically oriented capillary tube. The evaporation process is found responsible for inducing a convection pattern in the liquid phase below the meniscus. The convective structure was revealed using a {mu}-PIV technique. When external heating is applied to the system, the convection pattern is altered and can be reversed depending on the relative position of the heating element with respect to the liquid-vapour interface. An IR camera was used to measure temperature gradients generated by the heater along the capillary wall and along the liquid-vapour interface. This allowed the investigation of the relation between the temperature gradients generated along the tube wall and the convection taking place in the liquid under the effect of thermocapillary stress thus generated. The present study has demonstrated that the meniscus interfacial temperature profile is key for the onset of thermocapillary convection which is observed experimentally. (author)

42 ENGINEERING↗

Thermometry of an open spatially inhomogeneous flame by diode laser absorption spectroscopy

Features of a single-beam variant of diode laser absorption spectroscopy (DLAS) used for temperature measurements in a spatially inhomogeneous hot zone are studied. A flame temperature of a commercial burner is measured by using water molecule absorption lines. The flame is probed by a diode laser radiation at various heights and in various directions. The correctness of DLAS measurement results is verified by comparing DLAS data with temperatures measured by the method of coherent anti-Stokes scattering (CARS). It is shown that in homogeneous flame domains the temperatures obtained by both the methods coincide. Temperature inhomogeneity along the probe beam direction is a principal problem of DLAS, in which case the method yields information about some effective temperature along the light trace. The difference in data obtained by DLAS and CARS is estimated. In probing traces with temperature gradients the difference reaches 700 K. Possibilities of accounting for temperature inhomogeneities along the trace in DLAS measurements are discussed. A method of differential spectra is suggested, which in certain conditions can provide substantially better coincidence of results for the two methods. (laser spectroscopy)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flow-shear destabilization of multiscale electron turbulence

The impact of sheared ${\mathbf{E} \hskip -1pt \times \hskip -1pt \mathbf{B}}$ flow on multiscale turbulence is studied with nonlinear gyrokinetic simulations. Simulations are based on DIII-D-like, high-confinement mode (H-mode) pedestal parameters in the regime of low ion temperature gradient drive, where there is a broad spectrum of electron temperature gradient (ETG)-driven turbulence. It is found that ${\mathbf{E} \hskip -1pt \times \hskip -1pt \mathbf{B}}$ shear can have a significant effect on ETG-driven electron transport, with an unexpected transition from a turbulence stabilization regime at moderate to large shearing rates $γ_E$ to a novel turbulence destabilization regime at low levels of $γ_E$. In the turbulence stabilization regime, the electron energy flux decreases monotonically with $γ_E$, even when $γ_E$ is small compared to electron mode growth rates. The stabilizing effect comes dominantly from the electron, not ion, gyrokinetic equation. In the novel destabilization regime, reduction of zonal energy results from the interaction of $γ_E$-modulated nonlinear drive in the zonal ion gyrokinetic equation, increasing the electron transport over a broad range of shearing rates. Finally, neither of these effects has been observed in previous electron-scale simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE 1998 NOVEMBER 14 OCCULTATION OF GSC 0622-00345 BY SATURN. II. STRATOSPHERIC THERMAL PROFILE, POWER SPECTRUM, AND GRAVITY WAVES

On 1998 November 14, Saturn and its rings occulted the star GSC 0622-00345. The occultation latitude was 55.{sup 0}5 S. This paper analyzes the 2.3 {mu}m light curve derived by Harrington and French. A fixed-baseline isothermal fit to the light curve has a temperature of 140 {+-} 3 K, assuming a mean molecular mass of 2.35 AMU. The thermal profile obtained by numerical inversion is valid between 1 and 60 {mu}bar. The vertical temperature gradient is > 0.2 K km{sup -1} more stable than the adiabatic lapse rate, but it still shows the alternating-rounded-spiked features seen in many temperature gradient profiles from other atmospheric occultations and usually attributed to breaking gravity (buoyancy) waves. We conduct a wavelet analysis of the thermal profile, and show that, even with our low level of noise, scintillation due to turbulence in Earth's atmosphere can produce large temperature swings in light-curve inversions. Spurious periodic features in the 'reliable' region of a wavelet amplitude spectrum can exceed 0.3 K in our data. We also show that gravity-wave model fits to noisy isothermal light curves can lead to convincing wave 'detections'. We provide new significance tests for localized wavelet amplitudes, wave model fits, and global power spectra of inverted occultation light curves by assessing the effects of pre- and post-occultation noise on these parameters. Based on these tests, we detect several significant ridges and isolated peaks in wavelet amplitude, to which we fit a gravity wave model. We also strongly detect the global power spectrum of thermal fluctuations in Saturn's atmosphere, which resembles the 'universal' (modified Desaubies) curve associated with saturated spectra of propagating gravity waves on Earth and Jupiter.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron and ion thermal forces in complex (dusty) plasmas

Expressions for the ion and electron thermal forces acting on a charged grain, suspended in a weakly ionized plasma subject to temperature gradients, are derived. The main emphasize is on the conditions pertinent to the investigations of complex (dusty) plasmas in gas discharges. Estimates show that for the electron temperature gradients {approx}O(eV/cm) typically encountered in laboratory gas discharges, the electron thermal force can become an important player among other forces acting on micron-size grains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vectoring into Potential Blind Geothermal Systems in the Granite Springs Valley Area, Western Nevada: Application of the Play Fairway Analysis at Multiple Scales

The Great Basin region of the western USA is capable of generating much greater amounts of geothermal energy than currently produced. Most geothermal resources in this region are blind, and thus the favorable characteristics for geothermal activity must be synthesized and methodologies developed to discover new commercial-grade systems. The geothermal play fairway concept involves integration of multiple parameters indicative of geothermal activity as a means of identifying promising areas for new development. In the Nevada play fairway project, nine geologic, geochemical, and geophysical parameters were initially synthesized to produce a new geothermal potential map of 96,000 km2. Granite Springs Valley in western Nevada is a particularly promising site selected for detailed study. It contains several favorable structural settings, including terminations of major Quaternary normal faults and fault intersections. Geologic, geophysical, and geochemical techniques were employed to define the most likely sites for high permeability and select drilling targets for temperature-gradient holes. Local and intermediate permeability models were revised to reflect results of detailed analyses and generate new detailed play fairway maps of the area. The most promising site lies in the northeastern part of the basin directly east of Adobe Flat, where the horse-tailing termination of a major normal fault (as revealed by new gravity data), opaline sinter deposits, warm shallow wells, and a low-resistivity anomaly are collocated. Geothermometry suggests a blind system with temperatures as high as ~130°C in this area. Four new temperature-gradient holes document temperatures of ~80°C at ~150 m depth. Lessons learned in the detailed studies of this project include: 1) initially identified sites commonly include multiple favorable settings at a finer scale; 2) promising sites in Cenozoic basins cannot be well defined without detailed geophysical surveys; and 3) play fairway analysis is critical at multiple scales, providing a means to select regional prospects as well as vectoring into drilling targets at individual sites.

15 GEOTHERMAL ENERGY↗

Electrostatic turbulence in EAST plasmas with internal transport barrier

Based on first-principles nonlinear gyrokinetic simulations, the electrostatic turbulence properties in the internal transport barrier (ITB) region of an Experimental Advanced Superconducting Tokamak discharge (#93890) are investigated. Specifically, ITBs with steep density and temperature gradients are located in the weakly negative magnetic shear region at the plasma center. In the linear stage, the growth rate and frequency of the ion temperature gradient (ITG) mode increase significantly due to resonant excitation by trapped electrons. That is, the resonance between trapped electrons and the ITG becomes strong due to the precession drift reversal of trapped electrons by the negative magnetic shear and Shafranov shift. Meanwhile, the trapped electron mode is stable in the ITB region due to only a very small fraction of electrons precessing in the direction of the electron diamagnetic drift. Nonlinear simulations show that, after considering the non-adiabatic effect of trapped electrons, the heat conductivity of ions and the turbulence intensity increase by at least a factor of 7 compared with the results only considering the adiabatic effect of electrons. The zonal charge density of trapped electrons can partially cancel that of ions, which weakens the intensity of the zonal flow, and consequently reduces the zonal flow regulation and enhances the turbulent transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermodiffusion in concentrated ferrofluids: A review and current experimental and numerical results on non-magnetic thermodiffusion

Ferrofluids are colloidal suspensions consisting of magnetic nanoparticles dispersed in a carrier liquid. Their thermodiffusive behaviour is rather strong compared to molecular binary mixtures, leading to a Soret coefficient (S{sub T}) of 0.16 K{sup −1}. Former experiments with dilute magnetic fluids have been done with thermogravitational columns or horizontal thermodiffusion cells by different research groups. Considering the horizontal thermodiffusion cell, a former analytical approach has been used to solve the phenomenological diffusion equation in one dimension assuming a constant concentration gradient over the cell's height. The current experimental work is based on the horizontal separation cell and emphasises the comparison of the concentration development in different concentrated magnetic fluids and at different temperature gradients. The ferrofluid investigated is the kerosene-based EMG905 (Ferrotec) to be compared with the APG513A (Ferrotec), both containing magnetite nanoparticles. The experiments prove that the separation process linearly depends on the temperature gradient and that a constant concentration gradient develops in the setup due to the separation. Analytical one dimensional and numerical three dimensional approaches to solve the diffusion equation are derived to be compared with the solution used so far for dilute fluids to see if formerly made assumptions also hold for higher concentrated fluids. Both, the analytical and numerical solutions, either in a phenomenological or a thermodynamic description, are able to reproduce the separation signal gained from the experiments. The Soret coefficient can then be determined to 0.184 K{sup −1} in the analytical case and 0.29 K{sup −1} in the numerical case. Former theoretical approaches for dilute magnetic fluids underestimate the strength of the separation in the case of a concentrated ferrofluid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Thermal and Stress Behavior of the Fuel-clad Interface in Monolithic Fuel Mini-plates

As part of the Global Threat Reduction Initiative, a fuel development and qualification program is in process with the objective of qualifying very high density low enriched uranium fuel that will enable the conversion of high performance research reactors with operational requirements beyond those supported with currently available low enriched uranium fuels. The high density of the fuel is achieved by replacing the fuel meat with a single monolithic low enriched uranium-molybdenum fuel foil. Doing so creates differences in the mechanical and structural characteristics of the fuel plate because of the planar interface created by the fuel foil and cladding. Furthermore, the monolithic fuel meat will dominate the structural properties of the fuel plate rather than the aluminum matrix, which is characteristic of dispersion fuel types. Understanding the integrity and behavior of the fuel-clad interface during irradiation is of great importance for qualification of the new fuel, but can be somewhat challenging to determine with a single technique. Efforts aimed at addressing this problem are underway within the fuel development and qualification program, comprised of modeling, as-fabricated plate characterization, and post-irradiation examination. An initial finite element analysis model has been developed to investigate worst-case scenarios for the basic monolithic fuel plate structure, using typical mini-plate irradiation conditions in the Advanced Test Reactor. Initial analysis shows that the stress normal to the fuel-clad interface dominates during irradiation, and that the presence of small, rounded delaminations at the interface is not of great concern. However, larger and/or fuel-clad delaminations with sharp corners can create areas of concern, as maximum principal cladding stress, strain, displacement, and peak fuel temperature are all significantly increased. Furthermore, stresses resulting from temperature gradients that cause the plate to bow or buckle in an unconstrained fuel plate configuration is greatly enhanced in a constrained fuel plate configuration. The sensitivities of the model and input parameters are discussed, along with some overlap of initial experimental observations using as-fabricated plate characterization and post-irradiation examination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗