Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

High Cyclability of Ionic Liquid-Produced TiO2 Nanotube Arrays As an Anode Material for Lithium-Ion Batteries

TiO{sub 2} nanotubes (NTs) are considered as a potential SEI-free anode material for Li-ion batteries to offer enhanced safety. Organic solutions, dominatingly ethylene glycol (EG)-based, have widely been used for synthesizing TiO{sub 2} NTs via anodization because of their ability to generate long tubes and well-aligned structures. However, it has been revealed that the EG-produced NTs are composited with carbonaceous decomposition products of EG, release of which during the tube crystallization process inevitably causes nano-scale porosity and cracks. These microstructural defects significantly deteriorate the NTs charge transport efficiency and mechanical strength/toughness. Here we report using ionic liquids (ILs) to anodize titanium to grow low-defect TiO{sub 2} NTs by reducing the electrolyte decomposition rate (less IR drop due to higher electrical conductivity) as well as the chance of the decomposition products mixing into the TiO{sub 2} matrix (organic cations repelled away). Promising electrochemical results have been achieved when using the IL-produced TiO{sub 2} NTs as an anode for Li-ion batteries. The ILNTs demonstrated excellent capacity retention without microstructural damage for nearly 1200 cycles of charge-discharge, while the NTs grown in a conventional EG solution totally pulverized in cycling, resulting in significant capacity fade.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Molecular self-assembled designing and characterization of TiO2 NPs-CdS QDs-dye composite for photoanode materials

Highlights: • Initially TiO{sub 2} NPs were synthesized by sol-gel method and CdS QDs by one pot synthesis method. • The connectivity between TiO{sub 2} NPs and CdS QDs was well revealed by zeta potential and FTIR techniques. • This binary system was sensitized with N719 dye molecule for better photoanode material. • Ternary TiO{sub 2} NPs-CdS QDs-N719 dye photoanode showed higher conversion efficiency than its binary photoanode devices. - Abstract: Ternary based photoanodes have been prepared by using titanium dioxide (TiO{sub 2}) nanoparticles (NPs), cadmium sulfide (CdS) quantum dots (QDs) and N719 dye. Initially, CdS QDs and TiO{sub 2} NPs were synthesized by one pot synthesis and sol-gel method, respectively. CdS QDs were connected electrostatically to the surfaces of TiO{sub 2} NPs, and after that, this binary hybrid further self-assembled with N719 dye to form the composites. The NPs, QDs and the resultant composites are characterized by using different techniques. The connectivity of these anatase TiO{sub 2} NPs with cubic CdS QDs are confirmed by FTIR; while the broad coverage of these materials is studied through UV–Visible diffuse reflectance spectroscopy (DRS). The surface topology and the cross-sectional morphology of thin films are studied by high resolution transmission electron microscopy (HR-TEM) and field emission scanning electron microscopy (FE-SEM) techniques; while the structural properties of NPs and QDs are studied by X-ray diffractometer (XRD). The synergetic co-sensitization of CdS and N719 dye significantly enhancing the overall power conversion efficiency (η) of TiO{sub 2} up to 2.37% (J{sub sc} = 10.31 mA/cm{sup 2} and V{sub oc} of 550 mV) (100 mW/cm{sup 2}). The J{sub sc}, V{sub oc}, and η values along with Incident photon to current conversion efficiency (IPCE) value of ternary photoelectrode-based solar devices, is almost double to that of either binary TiO{sub 2} NPs-CdS QDs or binary TiO{sub 2} NPs-N719 binary systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication of hierarchical meso/macroporous TiO2 scaffolds by evaporation-induced self-assembly technique for bone tissue engineering applications

Highlights: • Hierarchical meso/macroporous TiO{sub 2} scaffolds were produced. • TiO{sub 2} formation mechanism was investigated. • The scaffolds had a pore size of 150–300 μm and meso pores of 6–12 nm. • The specific surface area obtained from BET theory was 67.89 m{sup 3} g{sup −1}. - Abstract: This paper reports the synthesis of hierarchical meso/macroporous TiO{sub 2} scaffolds by mimicking bone structure. Evaporation-induced self-assembly (EISA) method along with foamy method was utilized to produce TiO{sub 2} scaffolds in situ. Simultaneous thermal analysis (STA), small angle X-ray diffraction (SAXD), wide-angle X-ray diffraction (WAXD), nitrogen adsorption–desorption isotherm analysis, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques were applied to characterize the scaffolds. The results showed that TiO{sub 2} scaffolds can be produced after sintering the specimens at 550 °C for 2 h. The obtained scaffolds had a pore size in the range of 150–300 μm and meso pores in the range of 6–12 nm. The specific surface area was obtained from the Brunauer–Emmett–Teller theory, the total volume and mean diameter of pores were 67.89 m{sup 3} g{sup −1}, 0.1245 cm{sup 3} g{sup −1} and 7.3 nm, respectively.

36 MATERIALS SCIENCE↗

Microstructural analysis of undoped and moderately Sc-doped TiO2 anatase nanoparticles using Scherrer equation and Debye function analysis

Highlights: • UV light sensitive undoped and moderate Sc-doped anatase nanocrystallites were prepared without post-synthesis annealing. • Elongated nanocrystallites were found by Scherrer equation and Debye Function Analysis applied to XRD data and also HRTEM. • 4 at.% Sc doping reduced the amount of Ti vacancies by half. • Doping showed ~0.3% growth of lattice parameters. - Abstract: UV light sensitive undoped and moderate (4 at.%) Sc-doped anatase nanocrystallites were prepared by an efficient and environmentally benign method based on homogeneous hydrolysis of TiOSO{sub 4} and Sc{sub 2}(C{sub 2}O{sub 4}){sub 3.5}H{sub 2}O aqueous solutions using urea as a precipitation agent, without post-synthesis calcination or annealing. X-ray diffraction study of the obtained powders revealed single phase anatase in both samples. Two different methods were applied to estimate the anatase crystallite size and shape from the X-ray diffraction data. The first one is based on the more conventional Scherrer equation (as implanted in GSAS-II program) while the second one is based on Debye function analysis (as implanted in DUBUSSY suite version 2.2), which is considered to be more adequate for nanocrystallites. Although each program has its own shape models, both methods indicated similar results of elongated nanocrystallite geometry for Sc-doped TiO{sub 2}: (i) GSAS-II confirmed ellipsoid shape with equatorial size of 5.1(0) nm and axial size of 6.8(0), (ii) DEBUSSY suite 2.2 showed cylinder shape with diameter of equivalent circle in the ab-plane, D{sub ab} = 4.9(1.0) nm and crystallite length along the c-axis, L{sub c} = 5.4(3.2) nm. For the undoped TiO{sub 2} sample, equatorial size of 5.5(0) nm and axial size of 7.3(0) nm for the ellipsoid shape was determined according to GSAS-II, while D{sub ab} = 5.5(1.3) nm and L{sub c} = 6.0(2.2) nm for the cylinder shape was determined by DEBUSSY suite 2.2. These outcomes were found to corroborate with HRTEM analysis. Doping with 4 at.% Sc caused ~0.3% growth of lattice parameters from a = 3.7979 [4] Å, c = 9.4995 [9] Å for the undoped sample to a = 3.8110 [7] Å, c = 9.5274 [16] Å for the moderately Sc doped sample, while reduction in the Ti vacancies by half was confirmed by both methods. The introducing of Sc as electronically active secondary species into the crystal lattice of TiO{sub 2} can greatly alter its optical absorption. The incorporation of Sc into the crystal lattice of TiO{sub 2} favors the substitution of Ti, as both have approximately the same ionic size, and generates surface oxygen vacancies which can act as trapping center for the photogenerated electrons and reduce the recombination of electron–hole pairs. We can expect Sc doped TiO{sub 2} nanomaterials to have applications as effective photocatalysts for selective photocatalytic oxidation of various environmental organic pollutants.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced photocatalytic activities of TiO2-reduced graphene oxide nanocomposites controlled by TiOC interfacial chemical bond

Highlights: • A series TiO{sub 2}-reduced graphene oxide (RG) nanocomposites were prepared by hydrothermal methods at different temperature. • The photocatalytic performance of TiO{sub 2}-RG was illustrated by a TiOC interfacial chemical bond. • The photocatalytic properties were investigated by UV–vis test and degrading Rhodamine B. • The results revealed that the nanocomposites obtained at 120 °C possessed the optimum photocatalytic performance. - Abstract: In this study, a hydrothermal-prepared TiO{sub 2}-RG nanocomposites series exhibited excellent photocatalytic activities, of which the results can be largely influenced by a TiOC interfacial chemical bond between TiO{sub 2} nanoparticles and RG nanosheets. A stirring TiO{sub 2}-RG sample was prepared as contrast analysis using the same wet process except for heating. The characteristics of the composites were tested by X-ray diffraction (XRD), Raman, FT-IR, Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) analysis. The photocatalytic properties were verified by UV–vis diffuse reflectance spectra (DRS) testing as well as degrading Rhodamine B (RhB). Our research results show that the better TiOC interfacial chemical bond was formed, the narrower band gap of the nanocomposite was then obtained. The best hydrothermal synthesizing temperature was found out as 120 °C. The TiO{sub 2}-RG nanocomposite, as inexpensive, nontoxic and highly photo-catalytically active, may let it have a potential use in various photocatalytic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Al3+ doping into TiO2 photoanodes improved the performances of amine anchored CdS quantum dot sensitized solar cells

Highlights: • Several Al{sup 3+}-doped TiO{sub 2} nanocomposites were applied as photoanodes of CdS QDSSCs. • The cells were sensitized using ethylglycinate hydrochloride (amine)-capped CdS QDs. • The highest efficiency was measured for the cell containing 0.3% Al and 8.25% amine. • The electron life time was the most improved in the optimized cell (τ{sub e} = 37.58 ms). • The optimized cell showed η = 2.40%, V{sub OC} = 0.584 V, FF = 0.361 and J{sub SC} = 11.38 mA cm{sup −2}. - Abstract: Some quantum dot-sensitized solar cells (QDSSCs) were fabricated by doping Al{sup 3+} ions into the TiO{sub 2} and addition of amine (ethylglycinate hydrochloride) to the CdS solution in order to improve their efficiency. Results indicated that the photovoltaic parameters of the optimized cell were boosted compared with those of the reference cell which was free of Al{sup 3+} QDs and amine indicating 68, 73 and 10.40% improvements in efficiency, current density and open-circuit voltage, respectively. The electrochemical impedance spectra (EIS) proved that the electron life time was the most improved by 1.60 times in the optimized cell (τ{sub e} = 37.58 ms) compared with that of the cell made only using pure TiO{sub 2} (τ{sub e} = 23.52 ms). Thus, addition of 0.3%wt Al{sup 3+} as a dopant was appropriate to attain suitable photocurrent efficiency for the QDSSCs because it could be used in a minimum amount to improve the electron transport, drop the recombination and increase the cell efficiency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Diffusion behavior of Ag in TiO2 nanofilms

Highlights: • We prepared Ag/TiO{sub 2} bilayer nanofilms and heat treatment at 400 °C lead to the formation of Ag nanoparticles, which evenly distributed inside TiO{sub 2} nanofilms. • Ag is not oxidized during the heat treatment. • The morphology and size of Ag nanoparticles after heat treatment is temperature related, higher temperature lead to larger Ag nanoparticles on the surface of the film. • The diffusion process is of Ag much easier in amorphous than in anatase structure. - Abstract: Using magnetron sputtering, Ag/TiO{sub 2} bilayer nanofilms were deposited on glass substrates. Heat-treating the Ag/TiO{sub 2} nanofilms at 400 °C led to the formation of Ag nanoparticles, which dispersed inside the TiO{sub 2} films as well as the free surface of the TiO{sub 2} films. After heat treatment the sample at 500 °C, larger Ag nanoparticles could be observed on the surface, which means the particle size after heat treatment is temperature related. Anatase TiO{sub 2} phase was formed after the Ag/TiO{sub 2} films were heat-treated at 400 °C. SEM and TEM were used to investigate the morphology and structure of the films and it was found that Ag was not oxidized during heat treatment. The diffusion process of Ag in TiO{sub 2} film is also related to the order of Ag layer and TiO{sub 2} layer on glass substrate. Moreover, the diffusion process is much easier in amorphous than that in anatase structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Integration of Ag2WO4 and AgBr with TiO2 to fabricate ternary nanocomposites: Novel plasmonic photocatalysts with remarkable activity under visible light

Highlights: • Novel TiO{sub 2}/Ag{sub 2}WO{sub 4}/AgBr nanocomposites as efficient photocatalysts are reported. • The TiO{sub 2}/Ag{sub 2}WO{sub 4}/AgBr (15%) nanocomposite exhibited the highest activity. • Activity was 50.6-folds greater than TiO{sub 2} in RhB degradation under visible light. • The enhanced activity was attributed to n-n heterojunctions and plasmonic effect. - Abstract: Novel and highly efficient visible-light-driven TiO{sub 2}/Ag{sub 2}WO{sub 4}/AgBr plasmonic photocatalysts were fabricated by a simple one-pot strategy and they were characterized using XRD, EDX, FESEM, TEM, HRTEM, UV–vis DRS, FT–IR, and PL instruments. The TiO{sub 2}/Ag{sub 2}WO{sub 4}/AgBr nanocomposites exhibited higher photocatalytic performance under visible light for RhB, fuchsine, and MO degradations compared with the pure TiO{sub 2} and binary TiO{sub 2}/Ag{sub 2}WO{sub 4} and TiO{sub 2}/AgBr nanocomposites. The optimum photocatalytic activity of the TiO{sub 2}/Ag{sub 2}WO{sub 4}/AgBr (15%) nanocomposite is greater than those of the TiO{sub 2}, TiO{sub 2}/Ag{sub 2}WO{sub 4} (10%), and TiO{sub 2}/AgBr (15%) photocatalysts towards the degradation of RhB by a factor of almost 50.6, 22.6, and 5.1, respectively. The degradation reaction was also examined through trapping experiments and a mechanism for generation of the e{sup −}/h{sup +} pairs under visible light and promotion spatial separation of the charges through tandem n-n heterojunctions was proposed. We anticipate that the procedure used in this paper can provide a good protocol to design efficient visible-light-driven photocatalysts using TiO{sub 2} for environmental applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Single-step hydrothermal synthesis of wrinkled graphene wrapped TiO2 nanotubes for photocatalytic hydrogen production and supercapacitor applications

Highlights: • Wrinkle rGO wrapped TiO{sub 2} nanotubes were prepared by alkanine hydrothermal method. • Improved visible absorption and reduced recombination was witnessed in rGO-TiO{sub 2}. • H{sub 2} production of 24,880 μmole/g/h was achieved by rGO-TiO{sub 2}, 12.9 folds to P25 TiO{sub 2}. • Double layer and pseudo capacitance of rGO-TiO{sub 2} showed specific capacitance 160 F/g. - Abstract: Herein, we discuss the synthesis of reduced graphene oxide and TiO{sub 2} (rGO-TiO{sub 2}) nanocomposites with varying ratios of rGO to TiO{sub 2} by hydrothermal method. Photocatalytic ability of the nanocomposites was assessed for H{sub 2} production under natural sunlight. At 5 wt% GO loading, the rGO-TiO{sub 2} exhibited 24,880 μmol/g/h H{sub 2}, 12.9 times to commercial P25-TiO{sub 2} (1920 μmol/g/h). The symmetric supercapacitor device fabricated using rGO-TiO{sub 2} demonstrated 160 F/g specific capacitance with 99% retention. The efficient charge carrier separation and transportation between TiO{sub 2} nanotubes and rGO resulted high photocatalytic activity. The synergistic double layer pseudo capacitor behavior of rGO-TiO{sub 2} is the reason for improved specific capacitance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Extended investigation of sol aging effect on TiO2 electron transporting layer and performances of perovskite solar cells

Highlights: • Conditions of deposition of compact sol-gel TiO{sub 2} significantly influence the parameters of perovskite cells. • Sol aging originally considered as beneficial was proved to be adverse due to no repeatability, defects and residual water. • Free from such disadvantages TiO{sub 2} made from fresh sol can support as good cell parameters. • Roughness of transparent conductive oxide influences the optimal thickness of electron transporting layer. - Abstract: Organic−inorganic hybrid perovskites have created significant opportunities for low-cost and high-performance solar cells. The electron transporting layer (ETL) is one of the main components of the solar cell, which selectively transports electrons and at the same time acts as a barrier for holes. This paper focuses on the ETL composed of titanium dioxide deposited by sol-gel method. In particular, perovskite solar cells with ETL from aged titanium sol revealed significant differences of short circuit current which is 8% higher than their counterpart with ETL from fresh sol. Analysis of ETL morphology by atomic force microscopy combined with electrochemical impedance spectroscopy and optical properties measurements enabled to determine the source of this diversity. Additionally, the role of roughness of transparent electrode was indicated. The in-depth material analysis revealed some disadvantages of the ETL material, originally considered as supporting higher photovoltaic performance. The results indicated several problems associated with hardly controlled aging conditions, defects and presence of residual water, strongly advocate for TiO{sub 2} ETL form the fresh sol, which after optimization can guarantee the same good solar cell performance.

14 SOLAR ENERGY↗

Synthesis of black TiO2 with efficient visible-light photocatalytic activity by ultraviolet light irradiation and low temperature annealing

Highlights: • In this work, we have prepared black titanium dioxide (B-TiO{sub 2}) nanoparticals in combination with ultraviolet light and low temperature annealing. This method is simple, efficient and environmentally friendly. • The synthesis mechanism of the black B-TiO{sub 2} nanomaterials was analyzed by combining the different characterization data with the first-principles calculation results. • The Ti-O lattice and structure of the B-TiO{sub 2} sample did not change after low-temperature annealing. • The process of H-doping results in a reduction of the localized Ti{sup 3+} states, that are also the recombination centers of excited electrons and holes. • These nanoparticles can absorb a amount of visible light and degrade the organic pollution. - Abstract: Herein, a simple, efficient, and environmentally friendly strategy to prepare black TiO{sub 2} nanoparticles has been reported; the procedure combines the ultraviolet light irradiation and low-temperature annealing (300 °C) with continuous N{sub 2} flow under atmospheric pressure. The samples were characterized by the various techniques, such as X-ray diffraction, high resolution transmission electron microcopy, Raman spectroscopy, X-ray photoelectron spectroscopy. The photocatalytic degradation of the organic contaminant Rhodamine B was investigated when black TiO{sub 2} nanoparticles was irradiaed with ultraviolet light and visible light. The black TiO{sub 2} material possesses an anatase phase and is able to absorb a high amount of photon energy in the visible light region, effectively driving photochemical degradation reactions. The enhancement of the photocatalytic activity can be attributed to the following: first, the hydrogen ions decrease the localized Ti{sup 3+} states (which are also the e{sup −}-h{sup +} recombination centers) leading to a more efficient separation of the electron-hole pairs; secondly, the conduction band electrons in black TiO{sub 2} nanoparticles are responsible for strong absorption of visible light. Consequently, the photocatalytic degradation of Rhodamine B can be significantly enhanced using black TiO{sub 2} nanoparticles. This work proves that hydrogenated black TiO{sub 2} promotes the absorption of the entire electromagnetic spectrum and exhibits high photocatalytic activity under solar light irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving the humidity sensing below 30% RH of TiO2 with GO modification

Highlights: • Rutile phase TiO{sub 2} aggregates were prepared via thermal oxidation of pure Ti-discs, which is simple and inexpensive method. • TiO{sub 2} aggregates with submicron particles based sensor exhibited ultra-high response (R{sub A}/R{sub H{sub 2O}} > 10{sup 6}) to 90% RH. • Sensors based on TiO{sub 2} modified with GO exhibited improved sensitivity, stability and reproducibility. - Abstract: The development of cost-effective, robust, and reliable humidity monitoring system is nowadays in high demand. To this context, humidity sensors based on rutile TiO{sub 2} aggregates were prepared via thermal oxidation of pure Ti-discs at 1000 °C. The sensors based on only TiO{sub 2} aggregates exhibited the ultra-high response of about six orders of magnitude (R{sub A}/R{sub %RH} ∼ 10{sup 6}) to 90% RH with a response time of 28 s and excellent stability. However, these sensors showed no response to RH below 30%, which limits their use in practical applications for such RH level monitoring. Although with a reduced response in high RH, the TiO{sub 2} modified with GO showed potential to overcome this drawback. To understand their functionality, the TiO{sub 2} aggregates and TiO{sub 2}/GO were further characterized by XRD, SEM, TEM, Raman and FT-IR spectroscopy. The presented results are of high interest in terms of wide range humidity monitoring, low-cost and simple synthesis route, and high stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced DSSCs performance of TiO2 nanostructure by surface passivation layers

Highlights: • Passivation layers of MgO, CaCO{sub 3}, ZrO{sub 2} and SnO{sub 2} on TiO{sub 2} electrode deposited in copper container by spin coating method. • XRD and EDX analysis give detail information about surface passivation layers deposition on TiO{sub 2} electrode. • Achieved highest efficiency for electrode with MgO passivation layer it is about 6.05%. • Highest electron lifetime of 0.65 ms. - Abstract: Rutile titanium oxide (TiO{sub 2}) synthesized in copper containers, was spin-coated with different surface passivation layers such as magnesium oxide (MgO), calcium carbonate (CaCO{sub 3}), zirconium oxide (ZrO{sub 2}), and tin oxide (SnO{sub 2}). The deposition of these passivation layers on TiO{sub 2} confirmed with the help of XRD and EDX analysis, leads to changes in surface morphology induced by the passivation layers demonstrated by FE-SEM imaging. The highest photoconversion efficiency obtained for TiO{sub 2} electrode with MgO passivation layer (6.05%), respective incident photon conversion efficiency was 52%. After introduction of passivation layers on the TiO{sub 2} nanostructure, electron lifetime increased from 0.48 ms to 0.65 ms and charge transfer resistance decreased from 36.9 Ω cm (pristine TiO{sub 2} electrode) to 20.16 Ω cm (MgO passivation layer).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The photocatalytic performance of Ta and Rh co-doped TiO2 tuned by the average dopant valence

Highlights: • Effects of dopant valence on the photocatalytic performance was investigated. • New strategy was worked out to investigate effects of dopant valence. • The dopant valence was changed but the ionic radius keeps constant. • Average valence of Rh and Ta in Ti{sub 0.96}Ta{sub 0.04−x}Rh{sub x}O{sub 2} was changed multiply. • The optimal photocatalyst was obtained as the average valence approaches +4. - Abstract: In order to reveal the effects of dopant average valence on the photocatalytic performance, Ta and Rh co-doped Ti{sub 0.96}Ta{sub 0.04−x}Rh{sub x}O{sub 2} (x = 0, 0.008, 0.016, 0.02, 0.024, 0.032, and 0.04) samples were crystallized at 450 °C and 800 °C, respectively; then the 800 °C crystallized x = 0.02 sample was subsequently reduced in the H{sub 2}/N{sub 2} mixture gases at 600, 700, 800, and 900 °C. Under different processing conditions, Ta remains the valence of +5, while the valence of Rh varies. Rh exhibits Rh{sup 3+} and Rh{sup 4+} in the 450 °C crystallized samples and is completely oxidized to Rh{sup 4+} in the 800 °C crystallized samples. In the reduced samples, Rh exists in the forms of Rh, Rh{sup 3+} and Rh{sup 4+}. The optimal photocatalyst is obtained as the ratio of Rh{sup 3+}/Rh{sup 4+} is 2.11 or the average valence of doped Ta and Rh is closest to the +4 valence of substituted Ti.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗