Virtual Time III: Unification Of Conservative And Optimistic Synchronization In Parallel Discrete Event Simulation
Abstract not provided
97 MATHEMATICS AND COMPUTING↗
SEARCH · Search NASA
Results for “Time parallelization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A modular minicomputer based Navier-Stokes solver
The basic module consists of a minicomputer, low cost peripheral storage device (disk) and a modest number (8-12) of microcomputer modules. A simple arrangement, where the microcomputers are connected to a single time multiplexed bus, only communicating to the host minicomputer, will be efficient. By running the machine in a dedicated mode for long periods of time, it will be possible to obtain a large number of solutions. As such, the device should be useful as a research tool. A scheme is outlined to assemble a number of these computing modules in parallel to decrease computing time. The advantages and disadvantages are discussed of using a number of these systems assembled in a loosely coupled configuration, each independently computing a separate flow, to give a very high throughput.
Steinhoff, J.↗
On the use of a multigrid-reduction-in-time algorithm for multiscale convergence of turbulence simulations
Simulations of turbulent flow present challenges in terms of accuracy and affordability on modern highly-parallel computer architectures. A multigrid-reduction-in-time algorithm is used to provide a framework for separately evolving different scales of turbulence and for parallelizing the temporal domain, thereby increasing the concurrency. It is hypothesized that the space–time locality of the small scales of turbulence can be used to circumvent difficulties in applying temporal multigrid to flows dominated by inertial physics. For algorithms that fall well short of spectral accuracy (fourth-order is used in this work) attention must be paid to the accuracy of features on scales transferred between multigrid levels. Numerical experiments were performed using implicit large-eddy simulation. Results from applying the approach to an infinite-Reynolds number Taylor–Green flow and a double-shear flow at a Reynolds number of 11650 provide strong evidence that the approach has merit. The multigrid-reduction-in-time framework can be used to parallelize the temporal domain of a high-Reynolds-number turbulent flow and permit independent convergence of different scales. Establishing this foundation allows for future research in reducing the wall-clock time to solve turbulent flows while retaining the same accuracy as sequential solvers. In conclusion, current performance results from parallelizing the temporal domain are not competitive with those from sequential-in-time methods.
97 MATHEMATICS AND COMPUTING↗
Parallelization of Program to Optimize Simulated Trajectories (POST3D)
This paper describes the parallelization of the Program to Optimize Simulated Trajectories (POST3D). POST3D uses a gradient-based optimization algorithm that reaches an optimum design point by moving from one design point to the next. The gradient calculations required to complete the optimization process, dominate the computational time and have been parallelized using a Single Program Multiple Data (SPMD) on a distributed memory NUMA (non-uniform memory access) architecture. The Origin2000 was used for the tests presented.
Hammond, Dana P.↗
Optimizing the Accelerated Recursive Doubling Algorithm for Block Tridiagonal Systems of Equations
The need to solve block tridiagonal systems with hundreds or thousands of right-hand sides for the same block tridiagonal matrix is common in a variety of disciplines. To meet this need, the Accelerated Recursive Doubling Algorithm was developed. After a right-hand side independent phase, the algorithm allows for the quick, online calculation of solutions for different right-hand sides. In this work, we present methods to optimize the Accelerated Recursive Doubling Algorithm in memory usage and computation time in a hybrid parallelization model. The right-hand side independent phase of the naïve implementation takes ≥ 11/3 the amount of memory required to store the tridiagonal matrix, while our implementation reduces the fraction to ≈ 5/3 . The right-hand side dependent phase of the naïve implementation takes ≥ 6 times the amount of memory required to store the right-hand side, while our implementation reduces the fraction to ≈ 3. The computation time for the independent phase is reduced to ≈ 2/3 times that of the naïve implementation, while the computation time for the dependent phase is reduced to ≈ 5/9 . With increasing numbers of shared-memory threads q on every distributed processing element, we have O(q) theoretical speedup.
97 MATHEMATICS AND COMPUTING↗
Understanding data motion in the modern HPC data center
The utilization and performance of storage, compute, and network resources within HPC data centers have been studied extensively, but much less work has gone toward characterizing how these resources are used in conjunction to solve larger scientific challenges. To address this gap, we present our work in characterizing workloads and workflows at a data-center-wide level by examining all data transfers that occurred between storage, compute, and the external network at the National Energy Research Scientific Computing Center over a three-month period in 2019. Using a simple abstract representation of data transfers, we analyze over 100 million transfer logs from Darshan, HPSS user interfaces, and Globus to quantify the load on data paths between compute, storage, and the wide-area network based on transfer direction, user, transfer tool, source, destination, and time. We show that parallel I/O from user jobs, while undeniably important, is only one of several major I/O workloads that occurs throughout the execution of scientific workflows. We also show that this approach can be used to connect anomalous data traffic to specific users and file access patterns, and we construct time-resolved user transfer traces to demonstrate that one can systematically identify coupled data motion for individual workflows.
Lockwood, GK↗
An asymptotic induced numerical method for the convection-diffusion-reaction equation
A parallel algorithm for the efficient solution of a time dependent reaction convection diffusion equation with small parameter on the diffusion term is presented. The method is based on a domain decomposition that is dictated by singular perturbation analysis. The analysis is used to determine regions where certain reduced equations may be solved in place of the full equation. Parallelism is evident at two levels. Domain decomposition provides parallelism at the highest level, and within each domain there is ample opportunity to exploit parallelism. Run time results demonstrate the viability of the method.
Scroggs, Jeffrey S.↗
Advances in Multi-Physics Modeling for Parallel Finite Element Code Suite ACE3P
SLAC developed ACE3P code suite is a comprehensive set of parallel finite-element codes for multi-physics modeling of particle accelerators. Running on massively parallel computer platforms for high fidelity and high accuracy simulation, ACE3P enables rapid virtual prototyping of accelerator and RF component design, optimization and analysis. Furthermore, recent advances of ACE3P have been focused on the implementation of advanced numerical algorithms, enhancement of multi-physics capabilities, and improvement of code performance on state-of-the-art high performance computing (HPC) platforms for large-scale RF modeling in accelerator applications and beyond. In this paper, we will present a nonlinear electromagnetic (EM) eigensolver for damping calculation of resonant modes for cavities coupled with waveguides, the thermal solver for accurate evaluation of heat loads in superconducting RF (SRF) cavity power coupler, the elastic solver for investigation of SRF cavity cryomodule (CM) bowing due to thermal effect, the frequency domain mechanical solver for studying SRF cavity mechanical oscillation modes, the particle tracking code for dark current simulation in SRF CM using a hybrid MPI+OpenMP parallel programing model, the time domain solver for high fidelity modeling of EM wave propagation for medical device in human body.
97 MATHEMATICS AND COMPUTING↗
Conservative explicit local time-stepping schemes for the shallow water equations
Here we develop explicit local time-stepping (LTS) schemes with second and third order accuracy for the shallow water equations. The system is discretized in space by a C-grid staggering method, namely the TRiSK scheme adopted in MPAS-Ocean, a global ocean model with the capability of resolving multiple resolutions within a single simulation. The time integration is designed based on the strong stability preserving Runge–Kutta (SSP-RK) methods, but different time step sizes can be used in different regions of the domain through the coupling of coarse-fine time discretizations on the interface, and are only restricted by respective local CFL conditions. The proposed LTS schemes are of predictor–corrector type in which the predictors are constructed based on Taylor series expansions and SSP-RK stepping algorithms. The schemes preserve some important physical quantities in the discrete sense, such as exact conservation of the mass and potential vorticity and conservation of the total energy within time truncation errors. Moreover, they inherit the natural parallelism of the original explicit global time-stepping schemes. Extensive numerical tests are presented to illustrate the performance of the proposed algorithms.
58 GEOSCIENCES↗
Method of detecting system function by measuring frequency response
Real-time battery impedance spectrum is acquired using a one-time record. Fast Summation Transformation (FST) is a parallel method of acquiring a real-time battery impedance spectrum using a one-time record that enables battery diagnostics. An excitation current to a battery is a sum of equal amplitude sine waves of frequencies that are octave harmonics spread over a range of interest. A sample frequency is also octave and harmonically related to all frequencies in the sum. The time profile of this signal has a duration that is a few periods of the lowest frequency. The voltage response of the battery, average deleted, is the impedance of the battery in the time domain. Since the excitation frequencies are known and octave and harmonically related, a simple algorithm, FST, processes the time record by rectifying relative to the sine and cosine of each frequency. Another algorithm yields real and imaginary components for each frequency.
Morrison, John L.↗
Method, system and computer-readable media for measuring impedance of an energy storage device
Real-time battery impedance spectrum is acquired using a one-time record. Fast Summation Transformation (FST) is a parallel method of acquiring a real-time battery impedance spectrum using a one-time record that enables battery diagnostics. An excitation current to a battery is a sum of equal amplitude sine waves of frequencies that are octave harmonics spread over a range of interest. A sample frequency is also octave and harmonically related to all frequencies in the sum. A time profile of this sampled signal has a duration that is a few periods of the lowest frequency. A voltage response of the battery, average deleted, is an impedance of the battery in a time domain. Since the excitation frequencies are known and octave and harmonically related, a simple algorithm, FST, processes the time profile by rectifying relative to sine and cosine of each frequency. Another algorithm yields real and imaginary components for each frequency.
25 ENERGY STORAGE↗
Examination of Semi-Analytical Solution Methods in the Coarse Operator of Parareal Algorithm for Power System Simulation
With continuing advances in high-performance parallel computing platforms, parallel algorithms have become powerful tools for development of faster than real-time power system dynamic simulations. In particular, it has been demonstrated in recent years that parallel-in-time (Parareal) algorithms have the potential to achieve such an ambitious goal. Here, the selection of a fast and reasonably accurate coarse operator of the Parareal algorithm is crucial for its effective utilization and performance. This paper examines semi-analytical solution (SAS) methods as the coarse operators of the Parareal algorithm and explores performance of the SAS methods to the standard numerical time integration methods. Two promising time-power series-based SAS methods were considered; Adomian decomposition method and Homotopy analysis method with a windowing approach for improving the convergence. Numerical performance case studies on 10-generator 39-bus system and 327-generator 2383-bus system were performed for these coarse operators over different disturbances, evaluating the number of Parareal iterations, computational time, and stability of convergence. All the coarse operators tested with different scenarios have converged to the same corresponding true solution (if they are convergent) and the SAS methods provide comparable computational speed, while having more stable convergence to the true solution in many cases.
97 MATHEMATICS AND COMPUTING↗
Parallel processing of a rotating shaft simulation
A FORTRAN program describing the vibration modes of a rotor-bearing system is analyzed for parellelism in this simulation using a Pascal-like structured language. Potential vector operations are also identified. A critical path through the simulation is identified and used in conjunction with somewhat fictitious processor characteristics to determine the time to calculate the problem on a parallel processing system having those characteristics. A parallel processing overhead time is included as a parameter for proper evaluation of the gain over serial calculation. The serial calculation time is determined for the same fictitious system. An improvement of up to 640 percent is possible depending on the value of the overhead time. Based on the analysis, certain conclusions are drawn pertaining to the development needs of parallel processing technology, and to the specification of parallel processing systems to meet computational needs.
Arpasi, Dale J.↗
Parallel algorithms for placement and routing in VLSI design
The computational requirements for high quality synthesis, analysis, and verification of very large scale integration (VLSI) designs have rapidly increased with the fast growing complexity of these designs. Research in the past has focused on the development of heuristic algorithms, special purpose hardware accelerators, or parallel algorithms for the numerous design tasks to decrease the time required for solution. Two new parallel algorithms are proposed for two VLSI synthesis tasks, standard cell placement and global routing. The first algorithm, a parallel algorithm for global routing, uses hierarchical techniques to decompose the routing problem into independent routing subproblems that are solved in parallel. Results are then presented which compare the routing quality to the results of other published global routers and which evaluate the speedups attained. The second algorithm, a parallel algorithm for cell placement and global routing, hierarchically integrates a quadrisection placement algorithm, a bisection placement algorithm, and the previous global routing algorithm. Unique partitioning techniques are used to decompose the various stages of the algorithm into independent tasks which can be evaluated in parallel. Finally, results are presented which evaluate the various algorithm alternatives and compare the algorithm performance to other placement programs. Measurements are presented on the parallel speedups available.
Brouwer, Randall Jay↗
RANS-MP: A Portable Parallel Navier-Stokes Solver
RANS-MP, a new implementation of a single-grid Navier-Stokes solver using the diagonalized Beam-Warming approximate-factorization scheme, is presented. This first release of the completely rewritten solver employs the following optimizations: (1) Bi-directional multi-partition method for the ADI solver part; this improves granularity and load balance; (2) Improved cache usage through elimination of non-unit-stride array access (possible in part due to multi-partitioning); (3) Preprocessing of communicating boundary conditions to streamline logic during time stepping; (4) Truly parallel, high-performance I/O using the newly-developed MPI-IO library; (5) Elimination of large amounts of redundant operations through efficient use of workspace. Results of some realistic wing computations on the IBM SP2 computer will be presented. We will demonstrate that excellent absolute performance and scalability are obtained with RANS-MP, even for relatively small grid sizes. Besides high performance, an outstanding feature of RANS-MP is its true portability, due to the use of the portable message passing and I/O libraries MPI and MPI-IO.
VanderWijngaart, Rob F.↗
Time accurate application of the MacCormack 2-4 scheme on massively parallel computers
Many recent computational efforts in turbulence and acoustics research have used higher order numerical algorithms. One popular method has been the explicit MacCormack 2-4 scheme. The MacCormack 2-4 scheme is second order accurate in time and fourth order accurate in space, and is stable for CFL's below 2/3. Current research has shown that the method can give accurate results but does exhibit significant Gibbs phenomena at sharp discontinuities. The impact of adding Jameson type second, third, and fourth order artificial viscosity was examined here. Category 2 problems, the nonlinear traveling wave and the Riemann problem, were computed using a CFL number of 0.25. This research has found that dispersion errors can be significantly reduced or nearly eliminated by using a combination of second and third order terms in the damping. Use of second and fourth order terms reduced the magnitude of dispersion errors but not as effectively as the second and third order combination. The program was coded using Thinking Machine's CM Fortran, a variant of Fortran 90/High Performance Fortran, and was executed on a 2K CM-200. Simple extrapolation boundary conditions were used for both problems.
Hudson, Dale A.↗
Finite Element Methods for real-time Haptic Feedback of Soft-Tissue Models in Virtual Reality Simulators
We have applied the linear elastic finite element method to compute haptic force feedback and domain deformations of soft tissue models for use in virtual reality simulators. Our results show that, for virtual object models of high-resolution 3D data (>10,000 nodes), haptic real time computations (>500 Hz) are not currently possible using traditional methods. Current research efforts are focused in the following areas: 1) efficient implementation of fully adaptive multi-resolution methods and 2) multi-resolution methods with specialized basis functions to capture the singularity at the haptic interface (point loading). To achieve real time computations, we propose parallel processing of a Jacobi preconditioned conjugate gradient method applied to a reduced system of equations resulting from surface domain decomposition. This can effectively be achieved using reconfigurable computing systems such as field programmable gate arrays (FPGA), thereby providing a flexible solution that allows for new FPGA implementations as improved algorithms become available. The resulting soft tissue simulation system would meet NASA Virtual Glovebox requirements and, at the same time, provide a generalized simulation engine for any immersive environment application, such as biomedical/surgical procedures or interactive scientific applications.
Frank, Andreas O.↗
Real-time image processing II; Proceedings of the Meeting, Orlando, FL, Apr. 16-18, 1990
The present conference discusses topics in the fields of feature extraction and implementation, filter and correlation algorithms, optical correlators, high-level algorithms, and digital image processing for ranging and remote driving. Attention is given to a nonlinear filter derived from topological image features, IR image segmentation through iterative thresholding, orthogonal subspaces for correlation masking, composite filter trees and image recognition via binary search, and features of matrix-coherent optical image processing. Also discussed are multitarget tracking via hybrid joint transform correlator, binary joint Fourier transform correlator considerations, global image processing operations on parallel architectures, real-time implementation of a differential range finder, and real-time binocular stereo range and motion detection.
Juday, Richard D.↗