Search NASA⌕ Search

SEARCH · Search NASA

Results for “VIBRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Application of a computerized vibroacoustic data bank for random vibration criteria development

A computerized data bank system was developed for utilization of large amounts of vibration and acoustic data to formulate component random vibration design and test criteria. This system consists of a computer, graphics tablets, and a dry silver hard copier which are all desk top type hardware and occupy minimal space. Currently, the data bank contains data from the Saturn 5 and Titan 3 flight and static test programs. The vibration and acoustic data are stored in the form of power spectral density and one third octave band plots over the frequency range from 20 to 2000 Hz. The data were stored by digitizing each spectral plot by tracing with the graphics tablet. The digitized data were statistically analyzed, and the resulting 97.5 percent confidence levels were stored on tape along with the appropriate structural parameters. Standard extrapolation procedures were programmed for prediction of component random vibration test criteria for new launch vehicle and payload configurations. A user's manual is included to guide potential users through the programs.

Ferebee, R. C.↗
NASA NTRS1981

Design and evaluation of a state-feedback vibration controller

The effectiveness and practicality of the state-feedback vibration controller is demonstrated by computer simulations. It is shown that: (1) the required measurements can be reduced to fuselage accelerations; (2) the system is stable over a wide range of flight conditions; (3) a discrete design for the controller provides effective digital implementation at 80-Hz sampling; (4) attenuation produced by the actuators does not create a problem, and a simple lead compensator provides vibration reduction; and (5) a design based on a hover model worked well at five knots. At 40 and 120 knots, vibrations in all but the vertical acceleration were effectively suppressed. The state-feedback vibration controller has a rapid convergence time and implementation is easier than with multicyclic control since no on-line harmonic analysis or identification algorithms are required.

Du Val, R. W.↗
NASA NTRS1982

Rotor vibration caused by external excitation and rub

For turbomachinery with low natural frequencies, considerations have been recently required for rotor vibrations caused by external forces except unbalance one, such as foundation motion, seismic wave, rub and so forth. Such a forced vibration is investigated analytically and experimentally in the present paper. Vibrations in a rotor-bearing system under a harmonic excitation are analyzed by the modal technique in the case of a linear system including gyroscopic effect. For a nonlinear system a new and powerful quasi-modal technique is developed and applied to the vibration caused by rub.

Matsushita, O.↗
NASA NTRS1982

Vibration and destabilizing effects of floating ring seals in compressors

Operating experience on a compressor commissioned 12 years ago has presented an interesting history of sporadic increases in shaft vibration. Initial operation was satisfactory with low levels of vibration. However, after some time the shaft vibration level increased to several mils. Initially this was believed to be due to rotor unbalance from deposits formed in the passages due to process upsets. After cleaning up the rotor, operation was again increased. It was then found that the rotor vibration was primarily subsynchronous. Further investigation revealed that the original seal design was subject to wear and was no longer properly pressure balanced. A modified seal design was installed and it has operated successfully for the past six years.

Emerick, M. F.↗
NASA NTRS1983

Vibration characteristics of hexagonal radial rib and hoop platforms

Experiment and analysis have been used to characterize the modes of vibration of planar radial rib and hoop hexagonal platforms. Finite element analysis correlated very well with experimental results. The sensitivity of mode shapes and frequencies to cable stiffness and initial tension is presented. Threshold values have been identified, above which changes in cable stiffness do not affect the first few platform vibration modes. Primary vibration modes of the radial rib platform involve beam bending. Vibration modes of the hoop platform exhibit both beam bending and frame bending and torsion. Results indicate for low order polygonal structures, the radial rib concept produced a higher fundamental frequency. For high order polygonal structures, the hoop concept has the potential to achieve a higher fundamental frequency than the radial rib concept.

Belvin, W. K.↗
NASA NTRS1984

Evaluation of ride quality prediction methods for helicopter interior noise and vibration environments

The results of a simulator study conducted to compare and validate various ride quality prediction methods for use in assessing passenger/crew ride comfort within helicopters are presented. Included are results quantifying 35 helicopter pilots discomfort responses to helicopter interior noise and vibration typical of routine flights, assessment of various ride quality metrics including the NASA ride comfort model, and examination of possible criteria approaches. Results of the study indicated that crew discomfort results from a complex interaction between vibration and interior noise. Overall measures such as weighted or unweighted root-mean-square acceleration level and A-weighted noise level were not good predictors of discomfort. Accurate prediction required a metric incorporating the interactive effects of both noise and vibration. The best metric for predicting crew comfort to the combined noise and vibration environment was the NASA discomfort index.

Leatherwood, J. D.↗
NASA NTRS1984

Vibrational and rotational excitation of CO in comets. Part 1: Non-equilibrium calculations. Part 2: Results of the calculation for standard bright comet, comet Iras-Araki-Alcock and comet Halley

The vibrational and rotational excitation of the CO molecule in cometary comae were investigated using a model which includes IR vibrational pumping by the solar flux, vibrational and rotational radiative decay, and collisional coupling among rotational states. Steady state was not assumed in solving the rate equations. The evolution of a shell of CO gas was monitored as it expanded from the nucleus into the outer coma. Collisional effects were treated using a kinetic temperature profile derived from theoretical work on the coma energy balance. The kinetic temperature was assumed to be extremely cold in the inner coma; this has significant consequences for the CO excitation. If optical depth effects are ignored, only low J transitions will be significantly excited in comets observed at high spatial resolution. Ground-based observations of CO co-vibrational and rotational transitions will be extremely difficult due to lack of sensitivity and/or terrestrial absorption. However, CO should be detectable from a large comet with favorable observing geometry if the CO is a parent molecule present at the 10% level (or greater) relative to H2O. Observations using cooled, spaceborne instruments should be capable of detecting CO emission from even moderately bright comets.

Chin, G.↗
NASA NTRS1984

Refinement and evaluation of helicopter real-time self-adaptive active vibration controller algorithms

A Real-Time Self-Adaptive (RTSA) active vibration controller was used as the framework in developing a computer program for a generic controller that can be used to alleviate helicopter vibration. Based upon on-line identification of system parameters, the generic controller minimizes vibration in the fuselage by closed-loop implementation of higher harmonic control in the main rotor system. The new generic controller incorporates a set of improved algorithms that gives the capability to readily define many different configurations by selecting one of three different controller types (deterministic, cautious, and dual), one of two linear system models (local and global), and one or more of several methods of applying limits on control inputs (external and/or internal limits on higher harmonic pitch amplitude and rate). A helicopter rotor simulation analysis was used to evaluate the algorithms associated with the alternative controller types as applied to the four-bladed H-34 rotor mounted on the NASA Ames Rotor Test Apparatus (RTA) which represents the fuselage. After proper tuning all three controllers provide more effective vibration reduction and converge more quickly and smoothly with smaller control inputs than the initial RTSA controller (deterministic with external pitch-rate limiting). It is demonstrated that internal limiting of the control inputs a significantly improves the overall performance of the deterministic controller.

Davis, M. W.↗
NASA NTRS1982

A formulation of rotor-airframe coupling for design analysis of vibrations of helicopter airframes

A linear formulation of rotor airframe coupling intended for vibration analysis in airframe structural design is presented. The airframe is represented by a finite element analysis model; the rotor is represented by a general set of linear differential equations with periodic coefficients; and the connections between the rotor and airframe are specified through general linear equations of constraint. Coupling equations are applied to the rotor and airframe equations to produce one set of linear differential equations governing vibrations of the combined rotor airframe system. These equations are solved by the harmonic balance method for the system steady state vibrations. A feature of the solution process is the representation of the airframe in terms of forced responses calculated at the rotor harmonics of interest. A method based on matrix partitioning is worked out for quick recalculations of vibrations in design studies when only relatively few airframe members are varied. All relations are presented in forms suitable for direct computer implementation.

Kvaternik, R. G.↗
NASA NTRS1984

Vibration and buckling of general periodic lattice structures

A method is presented for vibration and buckling analysis of arbitrary lattice structures having repetitive geometry in any combination of coordinate directions. The approach is based on exact member theory for representing the stiffness of an individual member subject to axial load, and in the case of vibration, undergoing harmonic oscillation. The method is an extension of previous work that was limited to specific geometries. The resulting eigenvalue problem is of the size associated with the repeating element of the structure. A computer program has been developed incorporating the theory and results are given for vibration of rectangular platforms and a large antenna structure having rotational symmetry. Buckling and vibration results for cable-stiffened rings are also given.

Anderson, M. S.↗
NASA NTRS1984

Laser measurements of the effects of vibrational energy on the reactions of CN

Pulsed laser photolysis of C2N2 at 193 nm has been used as a source of CN radicals in both the v-double-prime = 0 and v-double-prime = 1 levels. Individual rovibronic levels of these radicals were measured as a function of time with a tunable dye laser. From these measurements the rate constants for the reaction of each of these vibrational levels with H2, O2, CO, CO2, N2, HCN, C2N2, and CH4 have been determined. Some enhancement in the rate constant with vibrational energy which could not be ascribed to quenching was observed for O2, CH4, and H2. Only vibrational quenching was observed for HCN, N2, CO2, CO and C2N2. In the CO case the vibrational quenching rate appears to be significantly enhanced by complex formation during the quenching process.

Sayah, N.↗
NASA NTRS1984

The importance of nonlinearity on the higher harmonic control of helicopter vibration

The effect of nonlinearity on the higher harmonic control (HHC) of helicopter vibration is investigated using a nonlinear aeroelastic simulation. A nonlinear solution is proposed which relates the HHC inputs to vibration outputs on the basis of a Volterra functional series. The Volterra series solution is shown to reduce to a vector polynomial equation relating HHC inputs to vibration outputs at any harmonic frequency. The nonlinear transfer relationship is identified from a nonlinear vibration analysis computer program, and the identification model is examined in detail. Improvements to current HHC algorithms are presented, and several Kalman filter divergence problems are quantified.

Molusis, J. A.↗
NASA NTRS1985

An Analysis of the High Frequency Vibrations in Early Thematic Mapper Scenes

The motion of the mirrors in the thematic mapper (TM) and multispectral scanner (MSS) instruments, and the motion of other devices, such as the TDRSS antenna drive, and solar array drives onboard LANDSAT-4 cause vibrations to propagate through the spacecraft. These vibrations as well as nonlinearities in the scanning motion of the TM mirror can cause the TM detectors to point away from their nominal positions. Two computer programs, JITTER and SCDFT, were developed as part of the LANDSAT-D Assessment System (LAS), Products and Procedures Analysis (PAPA) program to evaluate the potential effect of high frequency vibrations on the final TM image. The maximum overlap and underlap which were observed for early TM scenes are well within specifications for the ground processing system. The cross scan and scan high frequency vibrations are also within the specifications cited for the flight system.

Kogut, J.↗
NASA NTRS1985

A study of internal and distributed damping for vibrating turbomachiner blades

Internal and distributed damping as possible methods for reducing the vibration response of turbomachine blades and theoretical methods for analyzing damped vibration were studied. It is demonstrated how the Ritz-Galerkin methods may be used to straightforwardly to analyze forced vibrations with damping. This is done directly without requiring the free vibration eigenfunctions. The Galerkin method is an effective technique for these types of problems. The Ritz method has the further advantage of not needing to satisfy the force type boundary conditions, which is particularly important for plates and shells. But proper functionals representing the forcing and damping terms must be developed, and this is done. Two types of damping--viscous and material (hysteretic) are considered. Both distributed and concentrated exciting forces are treated. Numerical results are obtained for cantilevered beams and rectangular plates. Studies showing the rates of convergence of the solutions are made. In the case of the cantilever beam, approximate solutions from the present methods are compared with the exact solutions.

Leissa, A. W.↗
NASA NTRS1986

Improved Technique for Finding Vibration Parameters

Filtering and sample manipulation reduce noise effects. Analysis technique improves extraction of vibrational frequencies and damping rates from measurements of vibrations of complicated structure. Structural vibrations measured by accelerometers. Outputs digitized at frequency high enough to cover all modes of interest. Use of method on set of vibrational measurements from Space Shuttle, raised level of coherence from previous values below 50 percent to values between 90 and 99 percent

Andrew, L. V.↗
NASA NTRS1985

Analysis of potential helicopter vibration reduction concepts

Results of analytical investigations to develop, understand, and evaluate potential helicopter vibration reduction concepts are presented in the following areas: identification of the fundamental sources of vibratory loads, blade design for low vibration, application of design optimization techniques, active higher harmonic control, blade appended aeromechanical devices, and the prediction of vibratory airloads. Primary sources of vibration are identified for a selected four-bladed articulated rotor operating in high speed level flight. The application of analytical design procedures and optimization techniques are shown to have the potential for establishing reduced vibration blade designs through variations in blade mass and stiffness distributions, and chordwise center-of-gravity location.

Landgrebe, A. J.↗
NASA NTRS1985

Rotor-to-stator rub vibration in centrifugal compressor

One example of excessive vibration encountered during loading of a centrifugal compressor train (H type compressor with HP casing) is discussed. An investigation was made of the effects of the dynamic load on the bearing stiffness and the rotor-bearing system critical speed. The high vibration occurred at a "threshold load," but the machine didn't run smoothly due to rubs even when it had passed through the threshold load. The acquisition and discussion of the data taken in the field as well as a description of the case history which utilizes background information to identify the malfunction conditions is presented. The analysis shows that the failures, including full reverse precession rub and exact one half subharmonic vibration, were caused by the oversize bearings and displacement of the rotor center due to foundation deformation and misalignment between gear shafts, etc. The corrective actions taken to alleviate excessive vibration and the problems which remain to be solved are also presented.

Gao, J. J.↗
NASA NTRS1985

The O2(+) vibrational distribution in the Venusian ionosphere

The vibrational distribution of O2(+) in the ionosphere of Venus was calculated for a model atmosphere (similar to one discribed by Fox, 1982), based on data from the Pioneer Venus neutral mass spectrometer. The calculation of the ion densities includes both chemistry and diffusion. At 100 km, quenching precludes survival of vibrationally excited 02(+). At the exobase, near 200 km, more than half of O2(+) molecules are vibrationally excited. The effects of vibrationally excited O2(+) on the hot oxygen coronas and the airglow are discussed.

Fox, J. L.↗