Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vertical temperature structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Dual-pace transient heat conduction in vertically aligned carbon nanotube arrays induced by structure separation

Vertically aligned arrays of carbon nanotubes (CNTs) are attractive for a wide range of macroscopic applications which can exploit the remarkable properties of individual nanotubes. In this work, an abnormal behavior of CNT bundles in heat conduction is discovered under the transient electro-thermal characterization. The measured voltage change over the sample shows a dual-pace thermal response (DTR), which could not be fitted using a single thermal diffusivity heat transfer model. Instead, two thermal diffusivities are determined from the DTR phenomenon. Three rounds of cryogenic experiments are conducted to investigate the physics behind DTR phenomenon. It starts to emerge when the temperature is reduced to a certain level. After two rounds of cryogenic experiments, the DTR phenomenon becomes permanent from 295 K to 10 K. The nano-scale structure separation induced by the increased thermal strain leads to macroscale structure separation, which results in two parallel heat conduction paths responsible for the DTR phenomenon. By building a new parallel heat transfer model taking both the transient and steady-state electrical and thermal response into consideration, the area ratio of separated CNTs is determined. Furthermore, this result uncovers the existence of coiled morphology and nano-structure evolution of CNTs under cryogenic state and its effect on thermal and electrical transport, especially on their transient behaviors. Knowledge of the thermal transport in these CNTs arrays is important considering the fact that transient thermal response strongly affects their mechanical, optical, and electrical behaviors.

42 ENGINEERING↗
NASA NTRS2012

Formation and Evolution of a Multi-Threaded Prominence

We investigate the process of formation and subsequent evolution of prominence plasma in a filament channel and its overlying arcade. We construct a three-dimensional time-dependent model of a filament-channel prominence suitable to be compared with observations. We combine this magnetic field structure with one-dimensional independent simulations of many flux tubes. The magnetic structure is a three-dimensional sheared double arcade, and the thermal non-equilibrium process governs the plasma evolution. We have found that the condensations in the corona can be divided into two populations: threads and blobs. Threads are massive condensations that linger in the field line dips. Blobs are ubiquitous small condensations that are produced throughout the filament and overlying arcade magnetic structure, and rapidly fall to the chromosphere. The total prominence mass is in agreement with observations. The threads are the principal contributors to the total mass, whereas the blob contribution is small. The motion of the threads is basically horizontal, while blobs move in all directions along the field. The peak velocities for both populations are comparable, but there is a weak tendency for the velocity to increase with the inclination, and the blobs with motion near vertical have the largest values of the velocity. We have generated synthetic images of the whole structure in an H proxy and in two EUV channels of the AIA instrument aboard SDO. These images show the plasma at cool, warm and hot temperatures. The theoretical differential emission measure of our system agrees very well with observations in the temperature range log T = 4.6-5.7. We conclude that the sheared-arcade magnetic structure and plasma dynamics fit well the abundant observational evidence.

Luna, M.↗
NASA NTRS2021

Near-Global Variability of Stratospheric Water Vapor Observed by SAGE III/ISS

The Stratospheric Aerosol and Gas Experiment III instrument on the International Space Station (SAGE III/ISS) has been making high quality solar occultation measurements of stratospheric water vapor since June 2017. Here we evaluate the large-scale geophysical variability of the SAGE III/ISS water vapor measurements for the first 3 years of observations (2017–2020) as part of data validation for retrieval version 5.1 (v5.1). Detailed comparisons of SAGE III/ISS v5.1 with the Aura Microwave Limb Sounder (MLS) version 5 retrievals show overall excellent agreement in terms of seasonal mean structure and large-scale variability. SAGE III/ISS data capture the well-known seasonal variations in water vapor including the vertically propagating “tape recorder” in the tropics and lower stratospheric maxima linked to the NH summer monsoons. The high vertical resolution (∼2 km) measurements from SAGE III/ISS demonstrate contributions of the monsoons to the wet phase of “tape recorder” during the Northern Hemisphere (NH) summer. Interannual variations over the short data record are also consistent between SAGE III/ISS and MLS in the stratosphere between 16 and 30 km. We furthermore evaluate large-scale variations in relative humidity (RH) derived from the high vertical resolution SAGE III/ISS water vapor measurements, highlighting the detailed seasonal behavior and links to thermal structure near the tropical tropopause. Spatial distributions of RH at the cold point tropopause (CPT) show a close link between high RH and the minimum CPT temperature in both the NH winter and summer, consistent with temperature control of water vapor near the tropopause.

water vapor↗
DOE OSTI2026

An Optimized Parameterization of Sub‐Grid Scale Advection for Convection Permitting Models

Convection‐permitting models (CPMs) explicitly resolve deep convection yet under‐resolve the organized lateral exchanges among drafts and their environment that control entrainment/detrainment, precipitation efficiency, and mesoscale structure. In this work, we introduce the Optimized Advection Scheme (OAS), which introduces a small rotation of the Cartesian frame of reference for the horizontal winds relative to other variables used in advection that induces cross‐gradient transport to mimic under‐resolved convective mixing. The rotation angle is selected to minimize the Kullback–Leibler divergence between the simulated and satellite observed precipitation intensity distributions, yielding a physically consistent perturbation that is computationally inexpensive and portable. Optimized Advection Scheme is implemented in WRF and evaluated over Amazon (April 2014). It shifts precipitation–precipitable‐water joint distributions toward lighter rain, reduces overly intense rates, and improves mesoscale convective system (MCS) lifetime and propagation. Mechanistically, the added cross‐gradient transport promotes convective detrainment and environmental mixing, which cools and moistens the mid‐troposphere, weakens downward momentum transport, alleviates excessive downwelling shortwave biases, and warms the surface temperature. The optimized rotation angle yields comparable improvements at 4‐km and 1‐km grid spacing, demonstrating resolution‐independent benefits across the CPM gray zone. By targeting the dynamical root of under‐mixed convective circulations, rather than tuning model microphysics or closures, OAS delivers robust, scale‐aware improvements in precipitation statistics, cloud vertical structure, and characteristics of MCS (MCSs), offering a practical pathway to more reliable CPM simulations for weather and climate applications.

CPM↗
NASA NTRS2001

Orbits of Saturn's Inner Moons and Other Observations Connected within the 1995-1996 Saturnian Ring Plane Crossing

We reduced and analyzed radio images of Saturn taken in 1990-1995 at 0.35, 2.0, 3.6 and 6.1 cm wavelength. The latitudinal brightness distribution varies substantially over time. Detailed modeling of these data shows that NH4SH condenses at the thermochemical equilibrium temperature of 235.5 K only at Northern mid-latitudes. Over most of the planet, condensation does not occur until the gas cools to 190 +/- 5 K. Supersaturation may also cause the dark equatorial region seen in 1995 at 6.1 cm. Observations of the rings show that the West (dusk) ansa is brighter than the East (dawn) ansa by factors up to 2. The magnitude of the asymmetry increases with increasing wavelength and with decreasing distance to the planet. This East-West asymmetry may be due to multiple scattering in gravitational wakes. We improved the Monte Carlo scattering code used to model the microwave emission from Saturn's rings at multiple wavelengths. The basic code outlined in Dunn, Molnar, and Fix describes the rings as a uniform, infinite layer of ice spheres with a finite vertical extent. The particle sizes follow a power law distribution and scatter light according to a linear combination of Mie and isotropic phase functions. These parameters may be adjusted to reflect the physical properties in the scattering properties of the ring particles. This is used to construct a model which can be directly compared to Very Large Array data. The code has been extended by including anisotropic particle distributions, primarily in the form of the wake structures that are likely to exist in the enhancements. The vertical extent of the wakes equals that of the ring layer. Between the wakes are regions of diminished density so that the optical depth integrated over many wakes matches that of the Voyager occultation experiments. This allows us to model the brightness temperature as a function of azimuth and look for asymmetric scattering behavior in the rings. By changing the width and relative density of the wakes, we can alter the nature of the gross scattering properties of the rings to match what is seen in our data.

Lissauer, Jack J.↗
NASA NTRS1979

Low cost fabrication of graphite epoxy column elements for large space structures

A procedure for fabricating graphite epoxy column elements used in the construction of large space platforms is described. Dry fiber is wound on a tapered aluminum mandrel in the LMSC vertical winding machine, and resin is injected between the mandrel and an outer sleeve. The winding and injection take place at elevated temperature to minimize the thermal expansion problems that arise in curing a tube on an aluminum mandrel when the end fittings are integrally wound.

Bluck, R. M.↗
NASA NTRS2007

Radiation Test Results for a MEMS Microshutter Operating at 60 K

The James Webb Space Telescope (JWST), the successor to the Hubble Space Telescope, is due to be launched in 2013 with the goal of searching the very distant Universe for stars that formed shortly after the Big Bang. Because this occurred so far back in time, the available light is strongly red-shifted, requiring the use of detectors sensitive to the infrared portion of the electromagnetic spectrum. HgCdTe infrared focal plane arrays, cooled to below 30 K to minimize noise, will be used to detect the faint signals. One of the instruments on JWST is the Near Infrared Spectrometer (NIRSPEC) designed to measure the infrared spectra of up to 100 separate galaxies simultaneously. A key component in NIRSPEC is a Micro-Electromechanical System (MEMS), a two-dimensional micro-shutter array (MSA) developed by NASA/GSFC. The MSA is inserted in front of the detector to allow only the light from the galaxies of interest to reach the detector and to block the light from all other sources. The MSA will have to operate at 30 K to minimize the amount of thermal radiation emitted by the optical components from reaching the detector array. It will also have to operate in the space radiation environment that is dominated by the MSA will be exposed to a large total ionizing dose of approximately 200 krad(Si). Following exposure to ionizing radiation, a variety of MEMS have exhibited performance degradation. MEMS contain moving parts that are either controlled or sensed by changes in electric fields. Radiation degradation can be expected for those devices where there is an electric field applied across an insulating layer that is part of the sensing or controlling structure. Ionizing radiation will liberate charge (electrons and holes) in the insulating layers, some of which may be trapped within the insulating layer. Trapped charge will partially cancel the externally applied electric field and lead to changes in the operation of the MEMS. This appears to be a general principle for MEMS. Knowledge of the above principle has raised the concern at NASA that the MSA might also exhibit degraded performance because, i) each shutter flap is a multilayer structure consisting of metallic and insulating layers and ii) the movement of the shutter flaps is partially controlled by the application of an electric field between the shutter flap and the substrate (vertical support grid). The whole mission would be compromised if radiation exposure were to prevent the shutters from opening and closing properly. energetic ionizing particles. Because it is located A unique feature of the MSA is that, as outside the spacecraft and has very little shielding, previously mentioned, it will have to operate at temperatures near 30 K. To date, there are no published reports on how very low temperatures (- 30K) affect the response of MEMS devices to total ionizing dose. Experiments on SiO2 structures at low temperatures (80 K) indicate that the electrons generated by the ionizing radiation are mobile and will move rapidly under the application of an external electric field. Holes, on the other hand, that would normally move in the opposite direction through the SiO2 via a "thermal hopping" process, are effectively immobile at low electric fields as they are trapped close to their generation sites. However, for sufficiently large electric fields (greater than 3 MV/cm) holes are able to move through the SiO2. The larger the field, the more rapidly the holes move. The separation of the electrons and holes leads to a reduced electric field within the insulating layer. To overcome this reduction in electric field, a greater external voltage will have to be applied that alters the normal operation of the device. This report presents the results of radiation testing of the MSA at 60 K. The temperature was higher than the targeted temperature because of a faulty electrical interconnect on the test board. Specifically, our goal was to determine whether the MSA would function propey after a TID of 200 krad(Si).

Rapchun, David A.↗
DOE OSTI2026

Observations of Offshore Low‐Level Jets Off the U.S. East Coast Reveal Systematic Biases in ERA5 and HRRR

Low-level jets (LLJs)—wind speed maxima typically occurring a few hundred meters above the surface—are common off the U.S. East Coast and influence many atmospheric processes with societal importance, including cloud formation, aviation safety, and search-and-rescue. However, their vertical structure and frequency remain poorly quantified due to limited offshore observations. This study presents new scanning Doppler LiDAR and infrared spectroradiometer data from the 2024 summer deployment of an offshore barge during the Wind Forecast Improvement Project 3. These coupled wind and temperature profiles provide unprecedented resolution to assess LLJ behavior and model performance. LLJs occurred in over 21% of observed profiles, with a weak diurnal preference for nighttime and early morning hours and maximum winds typically near 300 m. Both ERA5 and High-Resolution Rapid Refresh analysis underestimate jet wind speeds and misrepresent the boundary layer thermal structure. These results highlight persistent model biases and the critical need for high-resolution offshore observations.

17 WIND ENERGY↗
DOE OSTI2025

Geospatial modeling of near subsurface temperatures of the contiguous United States for assessment of materials degradation

Abstract Understanding subsurface temperature variations is crucial for assessing material degradation in underground structures. This study maps subsurface temperatures across the contiguous United States for depths from 50 to 3500 m, comparing linear interpolation, gradient boosting (LightGBM), neural networks, and a novel hybrid approach combining linear interpolation with LightGBM. Results reveal heterogeneous temperature patterns both horizontally and vertically. The hybrid model performed best achieving a root mean square error of 2.61 °C at shallow depths (50–350 m). Model performance generally decreased with depth, highlighting challenges in deep temperature prediction. State-level analyses emphasized the importance of considering local geological factors. This study provides valuable insights for designing efficient underground facilities and infrastructure, underscoring the need for depth-specific and region-specific modeling approaches in subsurface temperature assessment.

Science & Technology - Other Topics↗
NASA NTRS1990

Two-frequency lidar technique for mesospheric Na temperature measurements

This paper describes a new two-frequency lidar for measuring Na temperature profiles. The laser oscillator is tuned to the two operating frequencies by observing the Doppler-free structure of the Na D2 fluorescence spectrum in a vapor cell. The lidar technique and initial observations of the temperature profile between 82 and 102 km are described. Absolute temperature accuracies at the Na layer peak of better than + or - 3 K with a vertical resolution of 1 km and an integration period of approximately 5 min were achieved.

She, C. Y.↗
NASA NTRS2005

Ion Temperature Control of the Io Plasma Torus

We report on observational and theoretical studies of ion temperature in the Io plasma torus. Ion temperature is a critical factor for two reasons. First, ions are a major supplier of energy to the torus electrons which power the intense EUV emissions. Second, ion temperature determines the vertical extent of plasma along field lines. Higher temperatures spread plasma out, lowers the density and slows reaction rates. The combined effects can play a controlling role in torus energetics and chemistry. An unexpected tool for the study of ion temperature is the longitudinal structure in the plasma torus which often manifests itself as periodic brightness variations. Opposite sides of the torus (especially magnetic longitudes 20 and 200 degrees) have been observed on numerous occasions to have dramatically different brightness, density, composition, ionization state, electron temperature and ion temperature. These asymmetries must ultimately be driven by different energy flows on the opposite sides, presenting an opportunity to observe key torus processes operating under different conditions. The most comprehensive dataset for the study of longitudinal variations was obtained by the Cassini UVIS instrument during its Jupiter flyby. Steffl (Ph.D. thesis, 2005) identified longitudinal variations in all the quantities listed above wit the exception of ion temperature. We extend his work by undertaking the first search for such variation in the UVIS dataset. We also report on a 'square centimeter' model of the torus which extend the traditional 'cubic centimeter' models by including the controlling effects of ion temperature more completely.

Delamere, P. A.↗
DOE OSTI2025

Advanced Computational Modeling of High-Level Waste Vitrification at the Hanford Site

The U.S. Department of Energy (DOE) has selected vitrification for stabilizing legacy tank waste at the Hanford site, where radioactive waste from plutonium production was historically stored in underground tanks. This waste will be separated into low-activity waste (LAW) and high-level waste (HLW) fractions and processed at the Waste Treatment and Immobilization Plant (WTP). At WTP, glass melters are used for the vitrification of radioactive tank waste, transforming it into a stable borosilicate glass form for safe long-term storage. The melter vessel is constructed from highly durable and heat-resistant materials, where the vitrification process occurs. The main regions that are modeled are the melt pool, plenum, cold cap, riser/discharge chamber, and surrounding structure with insulation layers. Forced convection induced by air bubblers at the base of the melter ensure uniform temperature distribution and provide heat to the cold cap layer. The cold cap is a region of reacting batch feed that floats on top of the molten glass and is where the batch-to-glass reactions occur. Joule heating provided by electrodes mounted along the vertical walls of the melter and immersed directly in the glass, generates the necessary heat for the net endothermic conversion processes that occur in the cold cap. The high temperatures, radioactivity, and opaque nature of the glass prevent direct observation inside the melters. Therefore, computational models are essential for providing insight into factors that affect melter throughput. Thermocouples in the plenum provide operators with plenum temperature measurements. Operational adjustments include bubbling rate, voltage supplied to the electrodes, feed adjustments, and glass removal rate. Different computational fluid dynamics (CFD) models have been developed, each serving a specific purpose. There are CFD models of different scale melters, as well as models that capture the two-phase flow interfaces of rising bubbles in the molten glass or models with a simplified molten glass region so that the surrounding structure and plenum can be feasibly incorporated. Pilot-scale melter models have been developed to serve as validation of the methods employed in the simulation of the full-scale WTP melters. Models incorporating resolved bubbling are used to develop momentum source terms to implement into a single phase, multi-region, steady-state flow model that is being validated by measured process parameters such as glass production rate, voltage, input power, plenum temperatures, etc. The resolved bubbling model uses the multiphase volume of fluid approach to model the system with a high-resolution interface capturing scheme to maintain sharp interfaces between the molten glass and the air phase. The suite of CFD models is continually being improved to incorporate more realistic physics and achieve faster turnaround time. For example, an incremental controller is implemented to automatically adjust electrode voltage within the simulation to a molten glass set point temperature of 1150°C. Newer models feature improved meshes to ensure conformal meshes between regions and eliminate unnecessary mesh refinement in areas that are not of interest (such as boundary layers in offgas ports). Instead of explicitly modeling the structural, refractory, and insulation layers of the melter, a thermal resistance approach is used with published correlations used for boundary conditions. The development of robust and efficient CFD models will be instrumental in enabling the WTP to successfully fulfill its mission of safely stabilizing legacy nuclear waste.

12 - MGMT OF RADIOACTIVE AND NON-RADIOACTIVE WASTE↗
DOE OSTI2021

Geometrical frustration and competing orders in the dipolar trimerized triangular lattice

Here, we introduce and explore low-energy configurations in two-dimensional arrays consisting of Ising-type dipolar coupled nanomagnets lithographically defined onto three-nanomagnet vertices arranged in a triangular coordination. Thus, the system is dubbed the trimerized triangular lattice. Employing synchrotron-based photoemission electron microscopy, we perform temperature-dependent magnetic imaging of moment configurations. These states are then characterized in terms of spin correlations and magnetic structure factors. The results reveal a competition between ferromagnetic and vortex dominated orders, which can be controlled by varying the relevant lattice parameter and the corresponding competing interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1979

The behavior of tropical ozone during the stratospheric warming of March-April 1976

The backscatter ultraviolet spectrometer on the Atmosphere Explorer-E satellite obtained ozone data for the upper stratosphere and lower mesosphere from an equatorial orbit near the time of the March-April 1976 stratospheric warming. A simple inversion technique allows the extraction of information on the absolute ozone abundance and its longitudinal variation from the measured radiances. Between altitudes of 35 and 60 km tropical O3 in constant pressure layers exhibits increased spatial variations on length scales of 20 to 30 deg in longitude after the onset of the polar warming, indicating enhanced wave activity. One week after the polar vortex breakdown, upper stratospheric O3 begins a relaxation toward the unperturbed state, while that in the lower mesosphere continues to show maximum variations near + or 10% of the longitudinally averaged value. Although the degree of horizontal structure increases during the warming, the absolute O3 amounts averaged over longitude between 35 and 60 km in altitude remain nearly constant in time. The observed behavior is consistent with that expected from enhanced vertical transport of O3 in the tropics with accompanying adiabatic temperature changes which alter the chemical loss rate.

Frederick, J. E.↗
NASA NTRS2002

Ship Radar Observations of a Developing Hurricane in the East Pacific

During the recently completed East Pacific Investigation of Climate Processes in the Coupled Ocean-Atmosphere System (EPIC) field program, the NOAA research vessel Ronald H. Brown (RHB) was deployed in the east Pacific Inter Tropical Convergence Zone (ITCZ) for approximately 3 weeks near 10 deg. N, 95 deg. W. One of the principal objectives of the EPIC-ITCZ program was to observe the modulation of convection by synoptic-scale easterly waves and the air-sea coupling process in this poorly sampled region of the east Pacific. Data from the experiment will be used as validation to improve forecast models. The RHB carried a variety of platforms during EPIC to sample atmospheric and oceanic phenomena, including a scanning C-band Doppler radar, radiation flux instrumentation, air-sea flux system, Doppler lidar, 35 GHz cloud radar, UHF wind profiler, sea surface temperature (SST) sensors, as well as standard surface meteorological instrumentation and a suite of rain gauges. This presentation will focus on the analysis of C-band radar data that was collected on 10 September, 2001 as the ship passed through an easterly wave which later developed into hurricane Ivo. The ship captured approximately 12 hours of convection associated with the tropical disturbance. During this period, the domain sampled by the radar (approximately 71,000 sq km) contained a significant number of echo features. Specifically, the fraction of the domain containing radar echo above 10 dBZ reached 80% for over 2 hours and remained near 60% for a continuous six hour period. Animation of radar images showed distinct rotation in echo features associated with the easterly wave passage. Despite an approximate 4 C drop in surface air temperature and sustained winds approaching 20 m/ s, the SST remained nearly constant throughout the observation period (approx. 29.5 C). Peak values of latent and sensible heat flux exceeded 400 and 100 W /sq m, respectively. The radar documented the change in precipitation vertical structure as the ship passed through regions of significant convection with echo tops approaching 14 km and 30 dBZ echo tops extending to near 9 km embedded in regions that were predominantly stratiform in nature. Single Doppler retrievals (Extended Velocity Azimuth Display) were conducted continuously at 10-minute resolution for approximately 4 hours in the latter part of the observation period, and documented the transition from convection (low-level convergence, upper level divergence) to stratiform (mid-level convergence sandwiched between upper and lower level divergence) kinematic structure.

Cifelli, Robert↗
DOE OSTI2022

2D Oxides Realized via Confinement Heteroepitaxy

Novel confinement techniques facilitate the formation of non-layered 2D materials. Here it is demonstrated that the formation and properties of 2D oxides (GaO x , InO x , SnO x ) at the epitaxial graphene (EG)/silicon carbide (SiC) interface is dependent on the EG buffer layer properties prior to element intercalation. Using 2D Ga, it is demonstrated that defects in the EG buffer layer lead to Ga transforming to GaO x with non-periodic oxygen in a crystalline Ga matrix via air oxidation at room temperature. However, crystalline monolayer GaO 2 and bilayer Ga 2 O 3 with ferroelectric wurtzite structure(FE-WZ') can then be formed via subsequent high-temperature O 2 annealing. Furthermore, the graphene/X/SiC (X = 2D Ga or Ga 2 O 3 ) junction is tunable from Ohmic to a Schottky or tunnel barrier depending on the interface species. Finally, using vertical transport measurements and electron energy loss spectroscopy analysis, the bandgap of 2D gallium oxide is identified as 6.6 ± 0.6 eV, significantly larger than that of bulk β-Ga 2 O 3 (≈4.8 eV), suggesting strong quantum confinement effects at the 2D limit. Furthermore, the study presented here is foundational for development of atomic-scale, vertical 2D/3D heterostructure for applications requiring short transit times, such as GHz and THz devices.

2D gallium oxides↗
NASA NTRS1971

Joint measurements of wind and temperature structure in the winter mesosphere at high latitudes

An attempt to identify propagating internal gravity waves in the mesosphere was made by sounding the region with three instrumented rockets on January 13-14, 1970, from Churchill, Canada (59 N). The three observations, which were conducted at approximately 90 min. intervals, consisted of a pitot probe bracketed by two acoustic grenade soundings. Thus, two temperature and wind profiles and one density profile were obtained independently, permitting an examination of the thermodynamic structure and the wind structure. The results of the combined thermodynamic and wind observations were found to be quantitatively compatible with a gravity wave interpretation. This interpretation also predicts vertical velocities on the order of 10/msec in the 80 km region.

Eberstein, I. J.↗