Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Determination of the vacancy distribution over Al cation sites in γ-Al 2 O 3

Although gamma-alumina (γ-Al 2 O 3 ) is an extensively used material with wide-ranging applications due to its inherently high surface area and acidity, its atomic structure is still not fully understood. γ-Al 2 O 3 is described as having a spinel-like structure, where the O sublattice has a face-centered cubic (FCC) arrangement and Al cations are placed in the spinel tetrahedral and octahedral interstitial sites. Achieving the correct stoichiometry of Al 2 O 3 , however, requires the introduction of Al vacancies into some of the interstitial sites. Despite the importance of accurately describing the structure of γ-Al 2 O 3 , the distribution of vacancies between tetrahedral and octahedral sites remains unclear, in part because of the usually poor crystalline quality of γ-Al 2 O 3 that has often been used in previous studies. To determine the actual cation distribution in γ-Al 2 O 3 , single-crystalline γ-Al 2 O 3 was investigated using a correlative approach of experimental and simulated selected-area electron diffraction (SAED) and high-resolution electron energy-loss spectroscopy (EELS). Comparison of the reflection intensities in single-crystal SAED to simulated SAED from models with varied vacancy distributions revealed that vacancies exist primarily on tetrahedral sites, contrary to the placement of vacancies on octahedral sites proposed in several common models. Comparison of EELS spectra—acquired with the highest energy resolution reported so far for γ-Al 2 O 3 —with ab initio multiple scattering EELS simulations confirmed the distribution of vacancies on tetrahedral sites. These results enable more accurate modeling of γ-Al 2 O 3 to better predict its properties in existing and future applications.

36 MATERIALS SCIENCE↗

Optimization of the pyrolysis process of empty fruit bunch (EFB) in a fixed-bed reactor through a central composite design (CCD)

The production of crude palm oil from the processing of palm fresh fruit bunches in the palm oil mills in Malaysia hs resulted in a huge quantity of empty fruit bunch (EFB) accumulated. The EFB was used as a feedstock in the pyrolysis process using a fixed-bed reactor in the present study. The optimization of process parameters such as pyrolysis temperature (factor A), biomass particle size (factor B) and holding time (factor C) were investigated through Central Composite Design (CCD) using Stat-Ease Design Expert software version 7 with bio-oil yield considered as the response. Twenty experimental runs were conducted. The results were completely analyzed by Analysis of Variance (ANOVA). The model was statistically significant. All factors studied were significant with p-values < 0.05. The pyrolysis temperature (factor A) was considered as the most significant parameter because its F-value of 116.29 was the highest. The value of R{sup 2} was 0.9564 which indicated that the selected factors and its levels showed high correlation to the production of bio-oil from EFB pyrolysis process. A quadratic model equation was developed and employed to predict the highest theoretical bio-oil yield. The maximum bio-oil yield of 46.2 % was achieved at pyrolysis temperature of 442.15 °C using the EFB particle size of 866 μm which corresponded to the EFB particle size in the range of 710–1000 μm and holding time of 483 seconds.

42 ENGINEERING↗

Redesign of the DFT/MRCI Hamiltonian

The combined density functional theory and multireference configuration interaction (DFT/MRCI) method of Grimme and Waletzke [J. Chem. Phys. 111, 5645 (1999)] is a well-established semi-empirical quantum chemical method for efficiently computing excited-state properties of organic molecules. As it turns out, the method fails to treat bi-chromophores owing to the strong dependence of the parameters on the excitation class. In this work, we present an alternative form of correcting the matrix elements of a MRCI Hamiltonian which is built from a Kohn-Sham set of orbitals. It is based on the idea of constructing individual energy shifts for each of the state functions of a configuration. The new parameterization is spin-invariant and incorporates less empirism compared to the original formulation. By utilizing damping techniques together with an algorithm of selecting important configurations for treating static electron correlation, the high computational efficiency has been preserved. The robustness of the original and redesigned Hamiltonians has been tested on experimentally known vertical excitation energies of organic molecules yielding similar statistics for the two parameterizations. Besides that, our new formulation is free from artificially low-lying doubly excited states, producing qualitatively correct and consistent results for excimers. The way of modifying matrix elements of the MRCI Hamiltonian presented here shall be considered as default choice when investigating photophysical processes of bi-chromophoric systems such as singlet fission or triplet-triplet upconversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The high redshift Integrated Sachs-Wolfe effect

In this paper we rely on the quasar (QSO) catalog of the Sloan Digital Sky Survey Data Release Six (SDSS DR6) of about one million photometrically selected QSOs to compute the Integrated Sachs-Wolfe (ISW) effect at high redshift, aiming at constraining the behavior of the expansion rate and thus the behaviour of dark energy at those epochs. This unique sample significantly extends previous catalogs to higher redshifts while retaining high efficiency in the selection algorithm. We compute the auto-correlation function (ACF) of QSO number density from which we extract the bias and the stellar contamination. We then calculate the cross-correlation function (CCF) between QSO number density and Cosmic Microwave Background (CMB) temperature fluctuations in different subsamples: at high z > 1.5 and low z < 1.5 redshifts and for two different choices of QSO in a conservative and in a more speculative analysis. We find an overall evidence for a cross-correlation different from zero at the 2.7 σ level, while this evidence drops to 1.5 σ at z > 1.5. We focus on the capabilities of the ISW to constrain the behaviour of the dark energy component at high redshift both in the Λ CDM and Early Dark Energy cosmologies, when the dark energy is substantially unconstrained by observations. At present, the inclusion of the ISW data results in a poor improvement compared to the obtained constraints from other cosmological datasets. We study the capabilities of future high-redshift QSO survey and find that the ISW signal can improve the constraints on the most important cosmological parameters derived from Planck CMB data, including the high redshift dark energy abundance, by a factor ∼ 1.5.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark Energy Survey Year 1 results: validation of weak lensing cluster member contamination estimates from P(z) decomposition

Weak lensing source galaxy catalogues used in estimating the masses of galaxy clusters can be heavily contaminated by cluster members, prohibiting accurate mass calibration. In this study, we test the performance of an estimator for the extent of cluster member contamination based on decomposing the photometric redshift P(z) of source galaxies into contaminating and background components. We perform a full scale mock analysis on a simulated sky survey approximately mirroring the observational properties of the Dark Energy Survey Year One observations (DES Y1), and find excellent agreement between the true number profile of contaminating cluster member galaxies in the simulation and the estimated one. We further apply the method to estimate the cluster member contamination for the DES Y1 redMaPPer cluster mass calibration analysis, and compare the results to an alternative approach based on the angular correlation of weak lensing source galaxies. We find indications that the correlation based estimates are biased by the selection of the weak lensing sources in the cluster vicinity, which does not strongly impact the P(z) decomposition method. Collectively, these benchmarks demonstrate the strength of the P(z) decomposition method in alleviating membership contamination and enabling highly accurate cluster weak lensing studies without broad exclusion of source galaxies, thereby improving the total constraining power of cluster mass calibration via weak lensing.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure of the N=126 nuclide {sup 212}Rn: Valence and core excited configurations

The level scheme of {sup 212}Rn has recently been expanded and extended to spins of {approx}39({Dirac_h}/2{pi}) and excitation energies of about 13 MeV using the {sup 204}Hg({sup 13}C,5n){sup 212}Rn reaction and {gamma}-ray spectroscopy. Time-correlated techniques were used to obtain channel selectivity and improved sensitivity. New {gamma}-ray branches from states associated with valence proton configurations as well as a number of new states below the 22{sup +} isomer have been identified. The excitation energy of the 22{sup +} core excited isomer itself has been established through the observation of several branches parallel to the main decay, implying a transition energy of 7.6 keV for the previously unobserved decay to the 20{sub 2}{sup +} state. The level scheme above the 22{sup +} isomer includes two new isomers with {tau}=25(2) ns and {tau}=12(2) ns placed at 12,211 and 12,548 keV, respectively. These are attributed to configurations involving triple neutron core excitations coupled to the aligned valence protons. The results are compared to semiempirical shell-model calculations, which can account for many of the states observed, with considerable precision for the valence proton configurations but with significant energy discrepancies for some core excited configurations. Calculations within the deformed independent particle model (DIPM) have also been carried out for the main core excited configurations at high spin and compared with both experiment and the empirical shell-model approach. The possible sources of discrepancies in both approaches are discussed, and it is suggested that anomalously low excitation energies are predicted for specific configurations in the DIPM.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Highly Efficient State-Selective Submicrosecond Photoionization Detection of Single Atoms

We experimentally demonstrate a detection scheme suitable for state analysis of single optically trapped atoms in less than 1 {mu}s with an overall detection efficiency {eta} exceeding 98%. The method is based on hyperfine-state-selective photoionization and subsequent registration of the correlated photoion-electron pairs by coincidence counting via two opposing channel electron multipliers. The scheme enables the calibration of absolute detection efficiencies and might be a key ingredient for future quantum information applications or precision spectroscopy of ultracold atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗

Deep radiogenomics for predicting clinical phenotypes in invasive breast cancer

Integration of heterogeneous data from different modalities such as genomics and radiomics is a growing area of research expected to generate better prediction of clinical outcomes in comparison with single modality approaches. To date radiogenomics studies have focused primarily on investigating correlations between genomic and radiomic features, or selection of salient features to determine clinical tumor phenotype. In this study, we designed deep neural networks (DNN), which combine both radiomic and genomic features to predict pathological stage and molecular receptor status of invasive breast cancer patients. Utilizing imaging data from The Cancer Imaging Archive (TCIA) and gene expression data from The Cancer Genome Atlas (TCGA), we evaluated the predictive power of Convolutional Neural Networks (CNN). Overall, results suggest superior performance on CNNs leveraging radiogenomics in comparison with CNNs trained on single modality data sources.

Yoon, Hong-Jun↗

A systematic decision-making methodology to formalize the selection of degree of realism in screening analysis of probabilistic risk assessment

In the nuclear power domain, Probabilistic Risk Assessment (PRA) is used to inform decision-making for Nuclear Power Plants (NPPs). Recently, there has been an increase in the utilization of modeling and simulation (M&S) to support the estimation of PRA inputs. Risk analysts should carefully select the PRA items that require M&S and their degree of realism (DoR) with consideration of the required resources. To support this selection, this article formulates a systematic decision-making approach for the DoR selection. The DoR selection is made based on two predictive decision-making attributes: the predicted differences in safety risk estimate (ΔSaRi) and the cost of analysis (ΔCAN). This research also develops and quantifies causal models to estimate ΔSaRi and ΔCAN. The causal model-based prediction of ΔSaRi and ΔCAN helps reduce the trial-and-error nature of the DoR selection in the PRA screening analysis and provides insights for DoR selection and the gradual refinements of PRA realism. This approach is demonstrated for a case study on fire PRA of NPPs, where an adequate DoR is selected from two fire models: an engineering correlation and a zone model.

Alkhatib, Sari [Department of Nuclear, Plasma, and↗

Predicting the Value of Adjuvant Therapy in Esophageal Squamous Cell Carcinoma by Combining the Total Number of Examined Lymph Nodes with the Positive Lymph Node Ratio

Background: The value of adjuvant therapy for esophageal squamous cell carcinoma (ESCC) has been controversial, at least partially due to the lack of efficient criteria for selecting suitable patients. This study aimed to explore the existence of parameters related to lymph node (LN) status that can predict the value of adjuvant therapy in ESCC. Methods: The study included 298 patients with ESCC who had undergone radical esophagectomy with lymphadenectomy. Adjuvant therapy was defined as reception of adjuvant chemotherapy, radiotherapy, or chemoradiotherapy. For the study, LN ratio (LNR), total number of resected LNs (TLNs), and pN stage were selected for Cox regression analyses, including their correlations and prognostic values for survival. Log-rank tests were used to compare the survival rates of the patients with and without adjuvant therapy stratified by pN stage, TLNs, LNR, or their combinations. Results: The independent prognostic factors for survival were TLNs, LNR, and pN stage. Whereas pN stage was significantly related to TLNs and LNR, TLNs were not correlated with LNR. The survival rates between the patients with and those without adjuvant therapy stratified by pN stage, TLNs, or LNR did not differ significantly. We used the median values of TLNs and LNR to group the patients into four groups. The patients in the group with fewer TLNs and higher LNR who had undergone adjuvant therapy showed a significantly better survival than those without adjuvant therapy (p = 0.030). Conclusions: In contrast to TLNs, LNR, and pN stage as single factors, the combination of TLNs and LNR can predict the value of adjuvant therapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Severe and mild drought cause distinct phylogenetically linked shifts in the blue grama (Bouteloua gracilis) rhizobiome

Plants rely on a diverse rhizobiome to regulate nutrient acquisition and plant health. With increasing severity and frequency of droughts worldwide due to climate change, untangling the relationships between plants and their rhizobiomes is vital to maintaining agricultural productivity and protecting ecosystem diversity. While some plant physiological responses to drought are generally conserved, patterns of root exudation (release of small metabolites shown to influence microbes) and the consequential effects on the plant rhizobiome can differ widely across plant species under drought. To address this knowledge gap, we conducted a greenhouse study using blue grama ( Bouteloua gracilis ), a drought-tolerant C4 grass native to shortgrass prairie across North American plains, as a model organism to study the effect of increasing drought severity (ambient, mild drought, severe drought) on root exudation and the rhizobiome. Our previous results demonstrated physiological effects of increasing drought severity including an increase in belowground carbon allocation through root exudation and shifts in root exudate composition concurrent with the gradient of drought severity. This work is focused on the rhizobiome community structure using targeted sequencing and found that mild and severe drought resulted in unique shifts in the bacterial + archaeal and fungal communities relative to ambient, non-droughted controls. Specifically, using the change in relative abundance between ambient and drought conditions for each ZOTU as a surrogate for population-scale drought tolerance (e.g., as a response trait), we found that rhizobiome response to drought was non-randomly distributed across the phylogenies of both communities, suggesting that Planctomycetota , Thermoproteota (formerly Thaumarchaeota ), and the Glomeromycota were the primary clades driving these changes. Correlation analyses indicated weak correlations between droughted community composition and a select few root exudate compounds previously implicated in plant drought responses including pyruvic acid, D-glucose, and myoinositol. This study demonstrates the variable impacts of drought severity on the composition of the blue grama rhizobiome and provides a platform for hypothesis generation for targeted functional studies of specific taxa involved in plant-microbe drought responses.

Goemann, Hannah M.↗

Preparation of PdCu Alloy Nanocatalysts for Nitrate Hydrogenation and Carbon Monoxide Oxidation

Alloying Pd with Cu is important for catalytic reactions such as denitrification reaction and CO oxidation reaction, but understanding of the catalyst preparation and its correlation with the catalyst’s activity and selectivity remains elusive. Herein, we report the results of investigations of the preparation of PdCu alloy nanocatalysts using different methods and the catalytic properties of the catalysts in catalytic denitrification reaction and CO oxidation reaction. PdCu alloy nanocatalysts were prepared by conventional dry impregnation method and ligand-capping based wet chemical synthesis method, and subsequent thermochemical activation as well. The alloying characteristics depend on the bimetallic composition. PdCu/Al 2 O 3 with a Pd/Cu ratio of 50:50 was shown to exhibit an optimized hydrogenation activity for the catalytic denitrification reaction. The catalytic activity of the PdCu catalysts was shown to be highly dependent on the support, as evidenced by the observation of an enhanced catalytic activity for CO oxidation reaction using TiO 2 and CeO 2 supports with high oxygen storage capacity. Lastly, we discussed the implications of the results to the refinement of the preparation of the alloy nanocatalysts.

36 MATERIALS SCIENCE↗

Integrated Molten Salt Reactor Modeling Capabilities in NEAMS Thermal Hydraulics Tools

The DOE neams program supports a full range of computational thermal fluids analysis capabilities and code developments for a broad range of advanced reactor concepts. The research and development approach under the thermal fluids technical area synergistically combines three length and time scales in a hierarchical multi-scale approach. To enable multi-scale thermal fluids capability using these codes, a key joint effort has been underway to develop an integrated system- and engineering-scale thermal fluids analysis capability, through integration of SAM and Pronghorn codes, both based on the MOOSE framework. This report summarizes recent advances in developing an integrated system- and engineering-scale modeling capability for the msr concept, which has gained significant interest in recent years. A consistent framework was established by coupling Pronghorn and SAM through the Saline interface, with thermophysical properties provided by the Molten Salt Thermal Property Database (MSTDB-TP). Further improvements were made to the coupling schemes and domain-overlapping strategies, enhancing the stability and robustness of multi-code simulations. Verification and validation efforts demonstrate the accuracy of this integration across a range of benchmark problems, including one-dimensional heated pipe flows, three-dimensional natural convection loops with evolving isotopic compositions, and \gls{msre} demonstration cases. Within Pronghorn, new capabilities were introduced to model corrosion and noble-metal plating phenomena, supported by an extended thermal-hydraulics framework and refined turbulence treatments. To capture two-phase flow behavior, a multiphase Euler–Euler model was implemented in Pronghorn, including advanced closure relations, high-resolution advection techniques, and capillary force reconstruction. Preliminary verification cases confirm the fidelity of the approach, while planned validation efforts target canonical multiphase benchmarks and application to msr components such as the msre pump bowl. Finally, updates to SAM’s msr mass transfer modeling were extended to consider noble gas migration into porous structures like graphite. The point kinetics model was updated to include reactivity feedback contributions from any defined species, such as xenon. The gas transport model was expanded for applicability to gas mixtures, bubble efflux phenomena, and species transport between liquid and gas phases. A selection of multi-scale Sherwood number correlations from MOSCATO/NekRS and multi-phase correlations from literature have been added for improved accuracy in calculating mass transfer coefficients. A companion effort on developing system-level redox corrosion has also been incorporated into SAM. Collectively, these enhancements strengthen the predictive capability of SAM and Pronghorn for simulating MSR thermal-hydraulics, corrosion, multiphase behavior, and fission-product transport, providing a more complete toolset for design, safety analysis, and licensing support of next-generation \gls{msr}s.

42 - ENGINEERING↗

Evaluating the Uncertainty of Terrestrial Water Budget Components Over High Mountain Asia

This study explores the uncertainties in terrestrial water budget estimation over High Mountain Asia (HMA) using a suite of uncoupled land surface model (LSM) simulations. The uncertainty in the water balance components of precipitation (P), evapotranspiration (ET), runoff (R), and terrestrial water storage (TWS) is significantly impacted by the uncertainty in the driving meteorology, with precipitation being the most important boundary condition. Ten gridded precipitation datasets along with a mix of model-, satellite-, and gauge-based products, are evaluated first to assess their suitability for LSM simulations over HMA. The datasets are evaluated by quantifying the systematic and random errors of these products as well as the temporal consistency of their trends. Though the broader spatial patterns of precipitation are generally well captured by the datasets, they differ significantly in their means and trends. In general, precipitation datasets that incorporate information from gauges are found to have higher accuracy with low Root Mean Square Errors and high correlation coefficient values. An ensemble of LSM simulations with selected subset of precipitation products is then used to produce the mean annual fluxes and their uncertainty over HMA in P, ET, and R to be 2.11 ± 0.45, 1.26 ± 0.11, and 0.85 ± 0.36 mm per day, respectively. The mean annual estimates of the surface mass (water) balance components from this model ensemble are comparable to global estimates from prior studies. However, the uncertainty/spread of P, ET, and R is significantly larger than the corresponding estimates from global studies. A comparison of ET, snow cover fraction, and changes in TWS estimates against remote sensing-based references confirms the significant role of the input meteorology in influencing the water budget characterization over HMA and points to the need for improving meteorological inputs.

Yoon, Yeosang↗

AGP-based unitary coupled cluster theory for quantum computers

Electronic structure methods typically benefit from symmetry breaking and restoration, specially in the strong correlation regime. Here, the same goes for ansätze on a quantum computer. We develop a unitary coupled cluster method based on the antisymmetrized geminal power (AGP)—a state formally equivalent to the number-projected Bardeen–Cooper–Schrieffer wavefunction. We demonstrate our method for the single-band Fermi–Hubbard Hamiltonian in one and two dimensions. We also explore post-selection as a state preparation step to obtain correlated AGP and prove that it scales no worse than O(√M) in the number of measurements, thereby making it a less expensive alternative to gauge integration to restore particle number symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combined Synchrotron X-ray Diffraction and Digital Image Correlation Technique for Measurement of Austenite Transformation with Strain in TRIP-assisted Steels

The strain-induced, diffusionless shear transformation of retained austenite to martensite during straining of transformation induced plasticity (TRIP) assisted steels increases strain hardening and delays necking and fracture leading to exceptional ductility and strength, which are attractive for automotive applications. A novel technique that provides the retained austenite volume fraction variation with strain in TRIP-assisted steels with improved precision is presented. Digital images of the gauge section of tensile specimens were first recorded up to selected plastic strains with a stereo digital image correlation (DIC) system. The austenite volume fraction was measured by synchrotron X-ray diffraction from small squares cut from the gage section. Strain fields in the squares were then computed by localizing the strain measurement to the corresponding region of a given square during DIC post-processing of the images recorded during tensile testing. Results obtained for a QP980 steel are used to study the influence of initial volume fraction of austenite and the austenite transformation with strain on tensile mechanical behavior.

Atom Probe Analysis↗

Search for the jet-induced diffusion wake in the quark-gluon plasma via measurements of jet-track correlations in photon-jet events in Pb+Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with the ATLAS detector

This paper presents a measurement of jet-track correlations in photon-jet events, using 1.72 nb −1 of Pb+Pb data at $\sqrt{s_{NN}}$ = 5.02TeV recorded with the ATLAS detector at the LHC. Events with energetic photon-jet pairs are selected, where the photon and jet are approximately back-to-back in azimuth. The angular correlation between jets and charged-particle tracks with transverse momentum (𝑝 T ) in the range 0.5–2.0 GeV in the hemisphere opposite to the jet, |Δ⁢𝜙(jet,track)|>𝜋/2, is measured as a function of their relative pseudorapidity difference, |Δ⁢𝜂(jet,track)|. In central Pb+Pb collisions, these correlations are predicted to be sensitive to the diffusion wake in the quark-gluon plasma resulting from the lost energy of high-𝑝T partons traversing the plasma, with a characteristic modification as a function of |Δ⁢𝜂(jet,track)|. The correlations are examined with different selections on the jet-to-photon 𝑝 T ratio to select events with different degrees of energy loss. No diffusion wake signal is observed within the current sensitivity and upper limits at 95% confidence level on the diffusion wake amplitude are reported.

heavy flavor physics↗

Intertwined charge, spin, and orbital degrees of freedom under electronic correlations in the one-dimensional Fe 3+ chalcogenide chain

Motivated by recent developments in the study of quasi-one-dimensional iron systems with Fe 2+ , we comprehensively study an Fe 3+ chalcogenide chain system. Based on first-principles calculations, the Fe 3+ chain has a similar electronic structure to that discussed before for the Fe 2+ chain, because of the similar Fe⁢𝑋 4 (𝑋 = S or Se) tetrahedron-chain geometry. Furthermore, a three-orbital electronic Hubbard model for this chain was constructed using the density matrix renormalization group method. A robust antiferromagnetic coupling was unveiled in the chain direction. In addition, in the intermediate electronic correlation 𝑈/𝑊 region, we found an interesting orbital-selective Mott phase with the coexistence of localized and itinerant electrons (𝑈 is the on-site Hubbard repulsion, while 𝑊 is the electronic bandwidth) based on the orbital-selective behavior observed in the charge fluctuations. Furthermore, we do not observe any obvious pairing tendency in the Fe 3+ chain in the electronic-correlation 𝑈/𝑊 region, where superconducting pairing tendencies were reported before in iron ladders. This suggests that superconductivity is unlikely to emerge in the Fe 3+ systems. Finally, our results clearly establish the similarities and differences between Fe 2+ and Fe 3+ iron chains, as well as iron ladders.

density matrix renormalization group↗