Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Cosmic Ray Energy Determination by the Reduced-Opening Angle Method

The reduced opening angle technique offers a simple way with minimal model dependence to measure cosmic ray energies over a broad range with out any normalization uncertainties. The emulsion film and CR39 detectors proposed are well established techniques and should perform adequately. The analysis method depends on accurate automatic scanning of the CR39 plates. UAH have developed such a capability. With the proposed geometry energy measurements to approx. 5 TeV/a can be made. The expected iron event rate (E greater than or equal to 500 GeV/a) is 10/sq m day. The expected energy resolution, from accelerator calibrations at 200 GeV/a, is -50% to +80%. Since the absolute flux has some sensitivity to the assumed power law index it is essential that good energy resolution is obtained. The expected charge resolution is approx. 0.3 charge units for the CNO group falling to approx. 1 charge unit for the iron group. A suitable event trigger would be a measurable (greater than 2 micrometer) deflected heavy (Z greater than 2) fragment. One potential background is electromagnetic dissociation that predominantly couples to individual protons or alphas. Although the cross- sections can be appreciable such events will not pass the event trigger.

Gregory, John C.↗

On the relationship between non-stoichiometry and passivity breakdown in ultra-thin oxides: combined depth-dependent spectroscopy, Mott-Schottky analysis and molecular dynamics simulation studies

Understanding the relationship between non-stoichiometry and physical properties of ultra-thin oxides is of great importance from both scientific and technological aspects. A specific example includes the onset of passivity breakdown in an ultra-thin oxide film in aqueous medium leading to the onset of corrosion. In this work, using the model system of ultra-thin oxide of alumina on aluminum synthesized by natural oxidation and photon-assisted oxidation processes; we demonstrate a direct correlation between passivity and quality of the oxide film quantitatively. Depth-dependent high resolution X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and nuclear reaction analysis (NRA) have been performed to characterize the physical and chemical properties of the oxide films, while detailed impedance measurements and Mott-Schottky studies have been performed to understand electronic transport. Combined NRA and TEM analysis reveal an 18% increase in oxygen density (for oxide films with near identical thicknesses ~3.8nm) in case of photon-assisted oxidation. The denser oxide film results in a ~34% more blockage of chloride ions transport as indicated by XPS analysis. Mott Schottky measurements on these oxide films indicates a 43% reduction of defect levels for UV-synthesized alumina when compared to native one, suggestive of chloride ion transport via oxygen vacancies. Additionally, molecular dynamics simulations have been performed to provide insights into the structure of the oxides at the atomic level to correlate with the experimental measurements. These simulations employ dynamic charge transfer between atoms and are used to investigate nanoscale oxides grown on Al (100) surfaces due to atomic and molecular oxygen. Oxidation using molecular and atomic oxygen resulted in an amorphous oxide scale with self limiting thickness of ~ 16 and 22 Å, respectively at 300 K. Structural and dynamic correlations indicate significant charge transfer to exist in the oxide film in both the cases. The oxide growth in both the cases occurs due to the inward oxygen and outward cation diffusion. The calculated in-plane and out-of-plane atomic diffusivities are 40-70% higher in case of atomic oxidation. In the presence of atomic oxygen, the O/Al ratio is more uniform and varies from 1.37 at the oxide-gas interface to 1.30 at metal-oxide interface whereas that formed by natural oxidation was sub-stoichiometric and oxygen deficient with O/Al values varying from 1.27 (oxide-gas interface) to 1.05 (metal-oxide interface) at room temperature. The simulation results are consistent with the reported experimental investigations.

36 MATERIALS SCIENCE↗

Application Of Elastic Perfectly Plastic Cyclic Analysis To Assessment Of Creep Strain

A cyclic elastic-perfectly plastic analysis method is proposed which provides a conservative estimate to cyclic creep strain accumulation within the ratchet boundary. The method is to check for ratcheting based on an elastic-perfectly material with a temperature-dependent pseudo yield stress defined by temperature, time and stress to give 1% creep strain. It does not require stress classification and is also applicable to a full range of temperature above and below the creep regime. This simplified method could be used as a rapid screening calculation, with full time-dependent creep analysis used if necessary.

Carter, Peter↗

Yield Analysis and Comparison of GaInP/Si and GaInP/GaAs Multi-Terminal Tandem Solar Cells

We present a yield analysis of tandem devices consisting of GaInP top cells on Si or GaAs bottom cells with different terminal configurations. Inputs are the I-V and external quantum efficiency of the individual subcells and the irradiance-dependent module temperature of the bottom cell. Our model calculates the temperature of the tandem module by taking into account the performance, spectral working range and luminescent coupling of the different tandem devices, enabling an irradiance- and weather-dependent yield analysis for these modules. We apply the model to compare two types of two junction devices, a GaInP/GaAs monolithically grown tandem device, and a GaInP top cell stacked on a Si bottom cell, the present two best dual junction devices. When the subcells are series connected both technologies perform equally well. The performance of the GaInP/Si can be significantly improved relatively by 5.8% using 3-terminal (3T) devices with a back-contacted bottom cell instead of a 2T configuration, showing a possible benefit when using Si back contacted cells. For GaInP/Si, the 3T-device works as well as the 4T-device, enabling the integration of monolithic tandem cells into modules at comparably high efficiencies.

14 SOLAR ENERGY↗

Optical and electrical properties of two-dimensional palladium diselenide

Two-dimensional (2D) noble-metal dichalcogenides exhibit exceptionally strong thickness-dependent bandgaps, which can be leveraged in a wide variety of device applications. A detailed study of their optical (e.g., optical bandgaps) and electrical properties (e.g., mobilities) is important in determining potential future applications of these materials. Here, we perform detailed optical and electrical characterization of 2D PdSe 2 nanoflakes mechanically exfoliated from a single-crystalline source. Layer-dependent bandgap analysis from optical absorption results indicates that this material is an indirect semiconductor with bandgaps of approximately 1.37 and 0.50 eV for the monolayer and bulk, respectively. Spectral photoresponse measurements further confirm these bandgap values. Moreover, temperature-dependent electrical measurements of a 6.8-nm-thick PdSe 2 flake-based transistor show effective electron mobilities of 130 and 520 cm 2 V –1 s –1 at 300 K and 77 K, respectively. Finally, we demonstrate that PdSe 2 can be utilized for short-wave infrared photodetectors. A room-temperature specific detectivity (D * ) of 1.8 × 10 10 cm Hz 1/2 W –1 at 1 μm with a band edge at 1.94 μm is achieved on a 6.8-nm-thick PdSe 2 flake-based photodetector.

36 MATERIALS SCIENCE↗

A first determination of the unpolarized quark TMDs from a global analysis

Transverse momentum dependent distribution and fragmentation functions of unpolarized quarks inside unpolarized protons are extracted, for the first time, through a simultaneous analysis of semi-inclusive deep-inelastic scattering, Drell-Yan and Z boson hadroproduction processes. This study is performed at leading order in perturbative QCD, with energy scale evolution at the next-to-leading logarithmic accuracy. Moreover, some specific choices are made to deal with low scale evolution around 1 GeV2. Since only data in the low transverse momentum region are considered, no matching to fixed-order calculations at high transverse momentum is needed.

Bacchetta, Alessandro↗

Rough surface scattering results based on bandpass autocorrelation forms

Surface-height autocorrelation forms such as Gaussian and exponential are often used in studies of near-normal incidence rough-surface scattering. Such models require the existence of a constant, or DC, value in the spectrum. The consequences of autocorrelation forms that correspond to spectral processes that are essentially bandpass in nature are examined. One such process is that of ocean wind waves. In this case, the spectral components do not extend down to zero frequency. The physical optics backscatter theory is reexamined relative to such autocorrelation functions. Experimental results obtained from a wavetank are compared to the autocorrelation model used in the analysis. The analysis indicates that Gaussian correlation length or mean-square slope is not an appropriate parameter for narrowband conditions and that significant slope is a more relevant parameter. Inherent in the deep-phase assumption is some form of slope dependency. The analysis given (and variants thereof) can be used to provide insight into the physical effects of separate spectral components and of spectral directionality.

Miller, Lee S.↗

srlife : a software tool for estimating the life of high temperature concentrating solar receivers. Part I – metallic receivers

Here, this paper introduces srlife, a tool for estimating the structural service life of concentrating solar power (CSP) receivers operating at high temperatures. Supporting both metallic and ceramic receiver designs, srlife is available as open-source software at https://github.com/applied-material-modeling/srlife and can be installed via the PyPi package manager (https://pypi.org). Given basic receiver geometry and incident heat flux, the tool performs thermohydraulic and structural analysis and estimates the life of a receiver. Designed for easy integration into a software stack, including solar field and levelized cost analysis, the tool can be utilized for optimizing receiver designs to meet service life and economic targets. This paper is Part I in a two-part series. Part I discusses the analysis process used to estimate the life of metallic receivers, along with a description of the required input data. Additionally, several heuristics applied within srlife can reduce analysis time significantly while maintaining accurate life estimations for metallic receivers when compared to full analyses. Several examples demonstrating the utility of srlife in receiver design are also discussed. Part II focuses on the life estimation of ceramic receivers, using time-dependent reliability analysis and various ceramic failure models implemented in srlife.

Creep-fatigue analysis↗

ANTI-CORRELATED TIME LAGS IN THE Z SOURCE GX 5-1: POSSIBLE EVIDENCE FOR A TRUNCATED ACCRETION DISK

We investigate the nature of the inner accretion disk in the neutron star source GX 5-1 by making a detailed study of time lags between X-rays of different energies. Using the cross-correlation analysis, we found anti-correlated hard and soft time lags of the order of a few tens to a few hundred seconds and the corresponding intensity states were mostly the horizontal branch (HB) and upper normal branch. The model independent and dependent spectral analysis showed that during these time lags the structure of the accretion disk significantly varied. Both eastern and western approaches were used to unfold the X-ray continuum and systematic changes were observed in soft and hard spectral components. These changes along with a systematic shift in the frequency of quasi-periodic oscillations (QPOs) made it substantially evident that the geometry of the accretion disk is truncated. Simultaneous energy spectral and power density spectral study shows that the production of the horizontal branch oscillations (HBOs) is closely related to the Comptonizing region rather than the disk component in the accretion disk. We found that as the HBO frequency decreases from the hard apex to upper HB, the disk temperature increases along with an increase in the coronal temperature, which is in sharp contrast with the changes found in black hole binaries where the decrease in the QPO frequency is accompanied by a decrease in the disk temperature and a simultaneous increase in the coronal temperature. We discuss the results in the context of re-condensation of coronal material in the inner region of the disk.

79 ASTRONOMY AND ASTROPHYSICS↗

A Study on the Temperature Correlation between a Surface of Dry Storage Canister and Spent Fuel Clad - 16446

Analysis of temperature correlation between dry canister surface and spent fuel cladding is performed in this study. The result shows that the spent fuel cladding temperature is possibly estimated using canister surface temperature in normal condition and the result of estimation is depended on analysis model. Two analysis models are designed by using a hypothetical spent fuel model and thermal analysis for the models is performed by using CFX(v11.0) code. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Collisions of localized shocks and quantum circuits

We study collisions between localized shockwaves inside a black hole interior. We give a holographic boundary description of this process in terms of the overlap of two growing perturbations in a shared quantum circuit. The perturbations grow both exponentially as well as ballistically. Due to a competition between different physical effects, the circuit analysis shows dependence on the transverse locations and exhibits four regimes of qualitatively different behaviors. On the gravity side we study properties of the post-collision geometry, using exact calculations in simple setups and estimations in more general circumstances. We show that the circuit analysis offers intuitive and surprisingly accurate predictions about gravity computations involving non-linear features of general relativity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time-dependent and time-integrated angular analysis of B{yields}{phi}K{sub S}{sup 0}{pi}{sup 0} and {phi}K{sup {+-}}{pi}{sup {+-}}

We perform a time-dependent and time-integrated angular analysis of the decays B{sup 0}{yields}{phi}K*(892){sup 0}, {phi}K{sub 2}*(1430){sup 0}, and {phi}(K{pi}){sub 0}*{sup 0} with the final sample of about 465x10{sup 6} BB pairs recorded with the BABAR detector. Twenty-four parameters are investigated, including the branching fractions, CP-violation parameters, and parameters sensitive to final-state interactions. We use the dependence on the K{pi} invariant mass of the interference between the scalar and vector or tensor components to resolve discrete ambiguities of the strong and weak phases. We use the time evolution of the B{yields}{phi}K{sub S}{sup 0}{pi}{sup 0} channel to extract the CP-violation phase difference {delta}{phi}{sub 00}=0.28{+-}0.42{+-}0.04 between the B and B decay amplitudes. When the B{yields}{phi}K{sup {+-}}{pi}{sup {+-}} channel is included, the fractions of longitudinal polarization f{sub L} of the vector-vector and vector-tensor decay modes are measured to be 0.494{+-}0.034{+-}0.013 and 0.901{sub -0.058}{sup +0.046}{+-}0.037, respectively. This polarization pattern requires the presence of a positive-helicity amplitude in the vector-vector decay from a currently unknown source.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Projectile fragmentation of {sup 40,48}Ca and isotopic scaling in a transport approach

We investigate theoretically projectile fragmentation in reactions of {sup 40,48}Ca on {sup 9}Be and {sup 181}Ta targets using a Boltzmann-type transport approach, which is supplemented by a statistical decay code to describe the de-excitation of the hot primary fragments. We determine the thermodynamical properties of the primary fragments and calculate the isotope distributions of the cold final fragments. These describe the data reasonably well. For the pairs of projectiles with different isotopic content we analyze the isotopic scaling (or isoscaling) of the final fragment distributions, which has been used to extract the symmetry energy of the primary source. The calculation exhibits isoscaling behavior for the total yields as do the experiments. We also perform an impact-parameter-dependent isoscaling analysis in view of the fact that the primary systems at different impact parameters have very different properties. Then the isoscaling behavior is less stringent, which we can attribute to specific structure effects of the {sup 40,48}Ca pair. The symmetry energy determined in this way depends on these structure effects.

74 ATOMIC AND MOLECULAR PHYSICS↗

Pressure effects on reactivity and extinction of n -dodecane diffusion cool flame

Low-temperature combustion at high pressure has gained increasing interest owing to the growing demand for clean and efficient propulsion and energy systems. In particular, cool flame structure, extinction limits, and fuel reactivities at high pressure are critical in affecting the engine performance at near-limit conditions. Here, this paper investigates the effects of pressure on the cool flame extinction limit, structure, radical index, reactivity, and oxygen concentration dependence by experiments, analysis, and modeling. A large n-alkane, namely n-dodecane (n C 12 H 26 ), is selected to study its diffusion cool flame dynamics and reactivity in a high-pressure counterflow burner up to 10 atm. The experimental results show that higher pressure increases the cool flame extinction strain rates, and that the pressure-weighted extinction strain rate (aP) is proportional to the square of pressure, P 2 . A scaling analysis explains the relationship between the dependence of flame structure, heat release rate, and pressure-weighted cool flame strain rate on pressure. Furthermore, radical indexes at different pressures are measured by isolating the thermal and transport effects from the chemical contribution to diffusion cool flame extinction. The radical index clearly shows that the low-temperature reactivity increases with pressure. In addition, due to the critical role of multiple oxygen addition reactions in low-temperature chemistry, the relationship between the cool flame extinction limit and the oxygen concentration is explored. It is found that the cool flame extinction limits are proportional to the n th power of the oxygen concentration, [O 2 ] n , and increasing pressure leads to stronger extinction limit dependence (larger n) on the oxygen concentration. The present experiment and detailed kinetic analysis show clearly that increasing pressure promotes the low-temperature chemistry including the oxygen addition reactions, while the scaling analysis explains well the experimental results.

33 ADVANCED PROPULSION SYSTEMS↗

Sensitivity analysis of xenon reactivity temperature dependency for HTTR LOFC test by using Relap5-3D code - 18365

A high-temperature gas-cooled reactor (HTGR) has superior safety characteristics. A loss of forced cooling (LOFC) test using a high-temperature engineering test reactor (HTTR) was carried out to verify the inherent safety characteristic of HTGR when forced cooling is diminished without reactor scram. In the test, all-gas circulators were tripped with an initial reactor power of 9 MW. The reactor power decreased from 9 MW to 0 MW by negative reactivity feedback in the core. Re-criticality was shown after about 8 h. This study focused on developing a point kinetics method with RELAP5-3D code for an LOFC accident. For future HTGR design and safety analysis, point kinetics method is important because of simple method. One key element of the point kinetics method is the reactivity performance estimation. There is a large temperature difference between the inlet and outlet of the core in HTGR, and the temperature fluctuation range has been large in several accidents. We analyze the temperature dependency of xenon-135 reactivity and show that the temperature dependency of xenon-135 microscopic absorption cross-section affected the re-criticality time of the LOFC test. This finding will be useful for predicting the emerging time and the peak level of reactor power increase after becoming re-critical. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Size-Dependent Biexciton Quantum Yields and Carrier Dynamics of Quasi-Two-Dimensional Core/Shell Nanoplatelets

Quasi-two-dimensional nanoplatelets (NPLs) possess fundamentally different excitonic properties from zero-dimensional quantum dots. We study lateral size-dependent photon emission statistics and carrier dynamics of individual NPLs using second-order photon correlation (g( 2 )(τ)) spectroscopy and photoluminescence (PL) intensity-dependent lifetime analysis. Room-temperature radiative lifetimes of NPLs can be derived from maximum PL intensity periods in PL time traces. It first decreases with NPL lateral size and then stays constant, deviating from the electric dipole approximation. Analysis of the PL time traces further reveals that the single exciton quantum yield in NPLs decreases with NPL lateral size and increases with protecting shell thickness, indicating the importance of surface passivation on NPL emission quality. Second-order photon correlation (g( 2 )(τ)) studies of single NPLs show that the biexciton quantum yield is strongly dependent on the lateral size and single exciton quantum yield of the NPLs. In large NPLs with unity single exciton quantum yield, the corresponding biexciton quantum yield can reach unity. In conclusion, these findings reveal that by careful growth control and core–shell material engineering, NPLs can be of great potential for light amplification and integrated quantum photonic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗