Search NASA⌕ Search

SEARCH · Search NASA

Results for “design principles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Examining Metal Identity and Proximity Effects on Acetylene Hydrogenation with Azolate-Based MOFs

Liquid organic hydrogen carriers (LOHCs) are an attractive fuel source due to their compatibility with existing transportation methods and ease of use. However, they suffer from sluggish (de)hydrogenation kinetics. One promising platform for developing next-generation catalysts is metal–organic frameworks (MOFs), which can enable systematic interrogation into the influence of metal identity and spatial arrangement. In this study, the effect of the coordination environment was investigated using Ni- and Co-based azolate MOFs: MFU-4l-OH (M x Zn 5–x (OH) 4 (BTDD) 3 ; x = 4 for M = Co and x = 3 for M = Ni, H 2 BTDD = bis(1H-1,2,3-triazolo[4,5-b][4′,5′-i])dibenzo[1,4]dioxin), composed of single-site nodes, and M(OH) 2 BBTA (M = Ni, Co; H 2 BBTA = 1H,5H-benzo(1,2-d:4,5-d’)bistriazole), composed of extended chain-type nodes. The catalysts were characterized by isotherms, powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photoelectron spectroscopy (XPS) analysis. Acetylene hydrogenation activity under steady state conditions (150 °C, 1:1 C 2 H 2 :H 2 ) revealed higher turnover frequencies (TOFs) up 1.17 × 10 –2 mol C 2 H 2 mol −1 Ni min −1 and 1.98 × 10 –3 mol C 2 H 2 mol −1 Co min −1 for Ni-MFU-4l-OH and Co-MFU-4l-OH, respectively, compared to their BBTA analogues. However, the Co-based MOFs, particularly Co 2 (OH) 2 -BBTA, exhibited greater selectivity (up to 19%) for the fully hydrogenated ethane product. Isosteric heat of adsorption (Q st ) measurements for ethylene and ethane revealed that the BBTA framework had stronger binding to the products than MFU-4l. Furthermore, these findings demonstrate that metal identity and coordination environment may modulate acetylene hydrogenation performance, leading to design principles for tuning LOHC hydrogenation catalysts.

catalysts↗
DOE OSTI2026

Electrolyte-Dependent, “Microscopically Irreversible” H-Atom Transfer Kinetics of Ce-Based Metal–Organic Framework, Ce-MOF-808

Redox reactions at the interface of metal oxides and protic electrolytes almost always involve protons and electrons in equal amounts. Given the stoichiometry, these proton-coupled electron transfer (PCET) reactions are thermochemically equivalent to net H-atom transfer (HAT) reactions. The correlation between the chemical nature of solid catalysts and HAT kinetics has been employed for decades as the design principle for energy-relevant reactions (e.g., reactions of 2H + /H 2 ). More recently, chemists have experimentally determined that a change in liquid electrolytes that alters the microenvironment at the redox-active sites has an equally profound impact on electrocatalysis involving PCET/HAT. Yet, precise correlations between the chemical nature of electrolytes and the PCET kinetics are, to date, rare in the literature. Herein, we report our findings using the Ce-based metal−organic framework, Ce-MOF-808, as a model system. Each Ce 6 (μ 3 −O) 4 (μ 3 − OH) 4 (OH) 6 (H 2 O) 6 node of this MOF undergoes a 1H + /1e − redox reaction. Using chronoamperometry and the Cottrell analysis, we have determined that the PCET hopping kinetics within the pores of Ce-MOF-808 can change by orders of magnitude by altering the buffer species and the proton activity of the electrolyte. Furthermore, in all buffers, reductive reactions were ∼3−10 times faster in kinetics than the reverse oxidative reaction with the same electrochemical driving force, suggesting that the system, at first glance, violates the principle of microscopic reversibility. Isothermal titration calorimetry (ITC) and computational simulations corroborated that the buffer-node binding thermodynamics are quite distinct, depending on the chemical nature of the buffer and the oxidation state of the node. Together, these results suggest that the substrate and the product during the oxidative vs reductive reaction of Ce-MOF-808 are chemically different species, which explains the apparent ‘microscopic irreversibility.’ Thus, the rational modulation of electrolytes can dramatically enhance PCET kinetics, even though the solid electrodes remain identical. Implications of these findings are contrasted with the electrochemical/electrocatalytic behavior of other redox-active MOFs, heterogeneous catalysts, and enzymatic systems at the solid−liquid interface.

Ce-based MOF↗
DOE OSTI2020

A Review on Challenges and Successes in Atomic-Scale Design of Catalysts for Electrochemical Synthesis of Hydrogen Peroxide

Hydrogen peroxide is a valuable chemical oxidant with a wide range of applications in a variety of industrial processes, especially in water sanitization. Electrochemical synthesis of hydrogen peroxide (H 2 O 2 ) through a two-electron oxygen reduction reaction (2e-ORR) or a two-electron water oxidation reaction (2e-WOR) has emerged as an appealing process for onsite production of this chemically valuable oxidant. On-site produced H 2 O 2 can be applied for wastewater treatment in remote locations or any applications where H 2 O 2 is needed as an oxidizing agent. Overall, this Review studies the theoretical efforts in understanding the challenges in catalysis for electrochemical synthesis of H 2 O 2 as well as providing design principles for more efficient catalyst materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Oxidation Dynamics of Supported Catalytic Cu Clusters: Coupling to Fluxionality

Copper oxide nanoclusters have a wide range of catalytic applications, such as the selective oxidation of hydrocarbons. O 2 binding to the catalyst, activation, and release upon reagent oxidation are key events in these catalytic chemistries. Furthermore, these events are expected to be accompanied by significant structural changes of the Cu clusters, because O atoms integrate into the cluster, rather than bind to its surface. Topping the complexity of the problem, partially oxidized Cu clusters are known to exhibit strong fluxionality and feature diverse and interconverting structures and oxygen contents in conditions of oxidative dehydrogenation (ODH). Hence, a significant dynamic coupling between the “hot” O 2 molecule impacting the cluster at reaction temperatures and the cluster fluxionality can be expected. In this work, we focus on the dynamics of dioxygen integration into a partially oxidized Cu cluster supported on hydroxylated amorphous alumina–a system recently reported to be an exceptionally selective catalyst for cyclohexane ODH with very little CO produced, whose mechanistic underpinnings are of utmost interest. The statistics over a swarm of adsorption and scattering trajectories where O 2 hits various sites on the cluster at reaction temperature shows that the O 2 binding does not only follow the minimal energy paths. O 2 also rarely integrates into the cluster in a single step and instead first binds to a single Cu atom via either an η 1 -O 2 or an η 2 -O 2 mode. Surprisingly, this step often has a higher barrier than the subsequent O 2 integration and dissociation, which in turn take multiple steps and complete the oxidation process. Dynamic trajectories starting from the key transition state of integration of the adsorbed O 2 can also lead to different intermediate structures during or right after the dissociation, due to the energy released from the transition state and the thermal intracluster effects. From these activated O 2 chemisorbed structures, O 2 dissociation occurs with moderate barriers (~0.5 eV), producing multiple final oxidized Cu 4 O 4 states. Hence, a diversity of reaction profiles for the attack of supported Cu cluster by O 2 emerges due to the dynamic effects, with implications for mechanisms, kinetic models, and catalyst design principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalytic Tandem CO 2 –Ethane Reactions and Hydroformylation for C3 Oxygenate Production

The strategy of tandem hydroformylation reaction for C3 oxygenate production from CO 2 and ethane represents an opportunity of simultaneously upgrading greenhouse gas CO 2 and the large-reserved shale gas into value-added liquid products. One of the challenges is how to tune and achieve the appropriate ethylene/CO/H 2 ratios for the downstream hydroformylation. Herein, the desired ethylene/CO/H 2 ratios were analyzed and identified by considering different combinations of main and side-reactions of CO 2 and ethane, based on which the PtSn 3 /γ-Al 2 O 3 catalyst was identified as promising to enable the catalytic tandem hydroformylation reaction. Further, the combined studies of reactor evaluation, in situ and ex situ characterization and theoretical calculations revealed that the Pt cluster/SnO x interfacial structures dominated the simultaneous dehydrogenation and dry reforming of ethane, thereby allowing the co-formation of ethylene, CO and H 2 that were subsequently converted to C3 oxygenates in the tandem hydroformylation reactor. The current work not only demonstrates the design principles of suitable catalysts for the tandem-reactor strategy, but also highlights the utilization of CO 2 and shale gas to produce value-added oxygenate products.

03 NATURAL GAS↗
DOE OSTI2026

Modulating Operational Conditions to Mitigate Deactivation in Formate Dehydrogenation on Pd Phases

In heterogeneous catalysis, poisoning by surface-bound intermediates poses a major barrier to sustained catalyst performance in (de)hydrogenation reactions. Formate/bicarbonate systems, as liquid organic hydrogen carriers (LOHCs), offer a CO 2 -integrated, low-temperature pathway for hydrogen storage and release, making them attractive for circular energy applications. However, their lower hydrogen density and susceptibility to catalyst deactivation limit their competitiveness compared to conventional LOHCs like methylcyclohexane. Here, this study investigates the mechanistic origins of formate (HCOO – ) dehydrogenation and associated deactivation on Pd interfaces. Using density functional theory (DFT) simulations, we show that under thermocatalytic conditions, strongly bound formate accumulates on the catalyst surface (Pd(111)), blocking active sites, raising activation barriers, and leading to progressive performance loss. Because formate adsorption involves charge transfer, we exploit its sensitivity to electronic structure by modulating the electrochemical potential of the catalyst. Our results reveal that hydrogen transfer from water and formate exhibits opposing potential dependencies, providing insights into the opposing driving forces behind both catalytic activity and poisoning. To further probe this phenomenon, we examine electrochemically induced phase transitions in Pd, focusing on PdO(100) and PdH(110), which are stable under oxidizing and reducing potentials, respectively, and demonstrate enhanced dehydrogenation activity between −0.4 and 0.2 V vs standard hydrogen electrode (SHE). Complementary thermal treatments help decouple kinetic and thermodynamic contributions to intermediate binding. These findings underscore the critical role of the catalyst phase and external stimuli in dictating poison-active site interactions and highlight phase engineering as a promising strategy to mitigate deactivation. This work offers mechanistic insights and design principles for developing more resilient and efficient catalysts for LOHC applications under realistic operating conditions.

Pd phase↗
DOE OSTI2026

Selective CO 2 Reduction by Bis(bipyridine)cobalt(II) Catalysts: The Role of Pendant Pyridine as a Proton Acceptor

Electrochemical CO 2 reduction reaction (CO 2 RR) catalyzed by molecular earth-abundant metal catalysts is a promising strategy to convert CO 2 into value-added products. One recent trend in this field has been focusing on the rational design of catalysts by incorporating redox-active ligands and modifying the secondary coordination sphere (SCS) to achieve efficient and selective CO 2 RR. Herein, we report a series of Co bis­(bipyridine) catalysts featuring various dangling groups, such as pyridine, tertiary amine, or butyl, in the secondary coordination sphere (Co-PyMe, Co-Py, Co-PrN, and Co-Bu). Efficient, selective electrocatalytic CO 2 RR was achieved by the complexes after the generation of triply reduced intermediate consisting of a Co I center and a dianionic ligand, producing CO as the major product and trace amount of H 2 . Strong correlations with the identity of dangling groups and turnover frequency (TOF) have been observed, in which Co-PyMe displayed the highest TOF (1086 s –1 in MeCN/H 2 O). Mechanistic studies indicated that the acceleration of CO 2 RR with pyridine-functionalized catalysts were derived from the protonation of pyridine dangling groups which participated as weak acids in the H-bonding network with exogenous proton sources, stabilizing CO 2 -bound intermediates and facilitating proton transfer. In addition, precatalytic CO 2 binding and activation at the third reduction (−2.1 V) was revealed by CV and SEC-IR studies. The resultant doubly reduced CO-bound species acted as a trapping state which inhibited CO 2 RR electrocatalysis. Regeneration of active species was accessed via reductive dissociation of CO at a more negative potential. In conclusion, this study highlights the combined effects of redox-active ligands and pyridine/pyridinium as SCS groups on CO 2 RR catalysis and provides design principles for future development of CO 2 RR catalysts utilizing pyridine/pyridiniums as SCS functional groups to fine-tune the catalytic activity.

CO2 reduction↗
DOE OSTI2026

Photooxidation of Organic Sulfide Enhanced by Heavy Atom Effect in Porphyrin Metal–Organic Frameworks with a Sea Topology

The photoactivity of three porphyrin-based metal-organic frameworks (PMOFs) incorporating Al, Ga, and In nodes was systematically evaluated using the photooxidation of an organic sulfide (2-chloroethyl ethyl sulfide, or CEES; a mustard gas simulant). Faster photodegradation of CEES was observed for PMOFs with heavier metal nodes, placing In-PMOF as the most efficient photocatalyst in the series. Guided by this insight, we developed CSLA-10, a MOF integrating In nodes and Sn-doped porphyrin linker to synergistically amplify heavy-atom effects at both the nodes and ligand levels. CSLA-10 exhibited the fastest reported CEES photooxidation to date, achieving a half-life of 38 s in methanol under blue LED irradiation. When grafted onto textiles, CSLA-10 enabled solvent-free CEES degradation in air/O 2 with a half-life of 2.7 min and complete conversion within 7 min, representing the most rapid full degradation reported under solvent-free conditions. Furthermore, this work establishes a dual heavy-atom strategy for enhancing intersystem crossing and singlet oxygen generation in porphyrin MOFs, providing a rational design principle for next-generation photocatalysts for the degradation of toxic organic sulfides.

Metal-organic frameworks↗
DOE OSTI2020

Optimized Electrolyte with High Electrochemical Stability and Oxygen Solubility for Lithium–Oxygen and Lithium–Air Batteries

Lithium-oxygen (Li-O2) batteries with high reversibility require a stable electrolyte against the side reactions with Li metal anode and reactive oxygen species. Moreover, an electrolyte which can effectively utilize the low partial pressure of oxygen in atmosphere has significance effect on the practical application lithium-air batteries. In this study, we developed a localized high concentration electrolyte (LHCE) using 1H,1H,5H-Octafluoropentyl 1,1,2,2-tetrafluoroethyl ether (OTE) as a diluent, which satisfies all these conditions at the same time. The OTE-based LHCE exhibits much improved electrochemical performances in Li-O2 batteries and Li-air batteries compared to the conventional electrolyte and high concentration electrolyte. The design principle of this novel electrolyte also provides an important guideline and reference for future researches of electrolytes in Li-O2 and Li-air batteries.

lithium air batteries, Localized high concentratio↗
DOE OSTI2022

Electrolytic Methane Production from Reactive Carbon Solutions

Here, we report an electrochemical reactor that converts 3.0 M KHCO 3 into methane at the cathode, and oxidizes water at the anode. The molar ratio of methane product to unreacted CO 2 gas (defined herein as "methane yield") was measured to be 34% at a partial current density of 120 mA cm -2 . The highest previously reported CO 2 -to-methane yield is 3%. Our reactor achieved this improvement in methane yield because it is fed with 3.0 M KHCO 3 , a type of reactive carbon solution, rather than gaseous CO 2 . The reactor uses H + delivered by a bipolar membrane to form CO 2 at the cathode. This CO 2 is subsequently reduced into methane. A cationic surfactant added to the catholyte suppressed hydrogen evolution and increased methane formation. A 1D continuum model confirmed that H + from the membrane promotes the formation of methane over multicarbon products at the cathode. These findings present design principles for electrochemical methane synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Methyl Termination of p-Type Silicon Enables Selective Photoelectrochemical CO 2 Reduction by a Molecular Ruthenium Catalyst

Methyl-terminated p-type silicon photoelectrodes selectively drive CO 2 reduction by a homogeneous [Ru(tpy)(Mebim-py)(NCCH 3 )] 2+ catalyst (tpy = 2,2′:6′,2″-terpyridine, Mebim-py = 1-methylbenzimidazol-2-ylidene-3-(2′-pyridine)). A 460 mV photovoltage is quantified for the photoelectrode. Under 1 sun illumination, this system achieves a Faradaic efficiency of 87% for CO at −1.7 V vs Fc +/0 , matching reports of the same catalyst at metallic electrodes operating at −2.1 V. When 5% water is introduced, the CH 3 -terminated Si photoelectrode remains stable, selectivity for CO is retained, and current density increases. Methyl termination suppresses the competitive hydrogen evolution observed for H-terminated Si photoelectrodes, which under the same conditions produce ca. 60% CO and 8% H 2 and have unstable performance. Furthermore, these results establish that a semiconductor photoelectrode can power a molecular CO 2 reduction catalyst without hydrogen evolution by the photoelectrode itself. Methyl termination of p-Si allows CO 2 reduction to kinetically outcompete proton reduction, revealing an important design principle for selective fuel formation.

Catalysts↗
DOE OSTI2025

Tailoring Electrolytes by Decoupling the Roles of Li + and Lithium Polysulfides in Li–S Batteries

Understanding the distinct roles of lithium ions (Li + ) and lithium polysulfide intermediates, Li 2 S x (LiPS) is critical for designing electrolytes that can extend the practical cycle life of lithium–sulfur (Li–S) batteries. Here, in this work, we decouple the solvation and solubility effects of Li + and LiPS and correlate them with electrochemical performance through a cosolvent strategy. Li + solubility and solvation primarily dictate the electrolyte’s ionic conductivity and the reversibility of lithium anode stripping/plating. In contrast, LiPS solvation governs the thermodynamics of sulfur (S 8 ), LiPS, and lithium sulfide (Li 2 S) interconversion, while the LiPS solubility determines their redox kinetics. By employing a fluorinated–glyme (F-glyme) cosolvent, specifically 1,2-bis­(2,2-difluoroethoxy)­ethane (F4DEE), that exhibits low LiPS solubility yet moderate Li + solvation, we designed an electrolyte that enhances lithium anode stability while maintaining sufficient sulfur cathode kinetics, thereby prolonging Li–S cell cycle life. This study provides mechanistic insights into the interplay between Li+ and LiPS in Li–S electrochemistry and offers design principles for next-generation electrolytes for Li–S batteries.

Yang, Jingtian [Argonne National Laboratory (ANL),↗
DOE OSTI2026

Microscopic Mechanisms of Superionic Na-ion Conductivity in Crystalline and Amorphous NaMOCl 4 (M = Nb, Ta) Solid Electrolytes

Sodium-ion solid electrolytes offer a sustainable route toward next-generation batteries, but few match the performance of their lithium counterparts. Halide-based NaMOCl 4 (M = Nb, Ta) has recently emerged as a promising analogue to LiMOCl 4 , yet its structure–transport relationships remain unclear due to poor crystallinity in experiments. Here, we combine density functional theory and machine-learned molecular dynamics to reveal that crystalline NaMOCl 4 exhibits negligible room-temperature conductivity with high activation barriers arising from vacancy-mediated diffusion below an order–disorder transition. Above this transition, rotational and translational motion of the [MO 2/2 Cl 4 – ] ∞ chains create new Na sites and enhances transport. In contrast, the amorphous phase inherently supports facile, three-dimensional Na diffusion through dynamic framework flexibility. These results show that ordered crystalline phases hinder ionic transport, while disorder – either thermally induced or structural – facilitates it, revising prior assumptions from the Li system and providing design principles for high-conductivity Na halide electrolytes.

Wei, Grace [University of California, Berkeley, CA↗
DOE OSTI2020

Understanding Charge Storage in Hydrated Layered Solids MOPO 4 (M = V, Nb) with Tunable Interlayer Chemistry

Hydrated layered solids are interesting charge storage hosts with potentially high electrochemical activity and interlayer tunability. Although it is often possible to tune their interlayer distance by a pillaring strategy, the poor electrochemical stability of such artificial structures remains a major issue in device operation. Here we investigate the charge storage properties of MOPO 4 (M = V, Nb) hydrates with a nanosheet morphology to understand the influence of the interlayer environment on cycling stability, as well as ion selectivity. While in hydrated VOPO 4 interlayer H 2 O molecules act as compressible springs to enable fast Li-/Na-ion transport kinetics and reasonable structural reversibility, NbOPO 4 layers with bridging PO 4 groups serving as permanent linkers exhibit highly stable cyclability for Li-ions, owing to a zero-volume-change ion transport process. However, the latter suffers from a much larger migration energy barrier for Na-ions. Lastly, our findings not only highlight a structurally intriguing material system, but also provide insights into reviving materials with an originally unstable interlayer chemical environment, and shed light on the design principles for creating electrochemically stable charge storage hosts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of Nanoparticle Size and Surface Chemistry on Peptoid Self-Assembly

Self-assembled organic nanomaterials can be generated by bottom-up assembly pathways where the structure is controlled by the organic sequence and altered using pH, temperature, and solvation. In contrast, self-assembled structures based on inorganic nanoparticles typically rely on physical packing and drying effects to achieve uniform superlattices. By combining these two chemistries to access inorganic–organic nanostructures, we aim to understand the key factors that govern the assembly pathway and structural outcomes in hybrid systems. In this work, we outline two assembly regimes between quantum dots (QDs) and reversibly binding peptoids. These regimes can be accessed by changing the solubility and size of the hybrid (peptoid-QD) monomer unit. The hybrid monomers are prepared via ligand exchange and assembled, and the resulting assemblies are studied using ex-situ transmission electron microscopy as a function of assembly time. In aqueous conditions, QDs were found to stabilize certain morphologies of peptoid intermediates and generate a final product consisting of multilayers of small peptoid sheets linked by QDs. The QDs were also seen to facilitate or inhibit assembly in organic solvents based on the relative hydrophobicity of the surface ligands, which ultimately dictated the solubility of the hybrid monomer unit. Increasing the size of the QDs led to large hybrid sheets with regions of highly ordered square-packed QDs. A second, smaller QD species can also be integrated to create binary hybrid lattices. Furthermore, these results create a set of design principles for controlling the structure and structural evolution of hybrid peptoid-QD assemblies and contribute to the predictive synthesis of complex hybrid matter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Small to Large Polaron Behavior Induced by Controlled Interactions in Perovskite Quantum Dot Solids

The polaron is an essential photoexcitation that governs the unique optoelectronic properties of organic–inorganic hybrid halide perovskites, and it has been subject to extensive spectroscopic and theoretical investigation over the past decade. A crucial but underexplored question is how the nature of the photogenerated polarons is impacted by the microscopic perovskite structure and what functional properties this affects. To tackle this question, we chemically tuned the interactions between perovskite quantum dots (QDs) to rationally manipulate the polaron properties. Through a suite of time-resolved spectroscopies, we find that inter-QD interactions open an excited-state channel to form large polaron species, which exhibit enhanced spatial diffusion, slower hot polaron cooling, and a longer intrinsic lifetime. At the same time, polaronic excitons are formed in competition via localized band-edge states, exhibiting strong photoluminescence but are limited by shorter intrinsic lifetimes. Furthermore, this control of polaron type and function through tunable inter-QD interactions not only provides design principles for QD-based materials but also experimentally disentangles polaronic species in hybrid perovskite materials.

14 SOLAR ENERGY↗
DOE OSTI2025

Design of Zn Chalcogenide Shells for Emissive Ga-Rich In 1– X Ga X As Quantum Dots Synthesized in Molten Salts

Colloidal quantum dots (QDs) have seen expanded applications in optoelectronics from visible to near-infrared (NIR) wavelengths. However, the options for QDs with bright and size-tunable emission in the NIR region are mostly limited to heavy-metal-based (Pb, Cd, Hg) semiconductors. Here, Ga-rich In 1–X Ga X As QDs with zinc chalcogenide shells are demonstrated as candidates for NIR emitters. Based on new developments in inorganic molten salt chemistry, we synthesized colloidal In 1–X Ga X As QDs containing up to 85% gallium with high crystallinity based on Raman and XRD analyses. Zinc selenide and sulfide shells with different morphologies were grown on In 1–X Ga X As QDs by controlling the Zn precursor chemistry. Despite the nominally reduced lattice mismatch in the In 1–X Ga X As/ZnSe heterostructure, a ZnS shell was found to be a much more effective passivation material: In 1–X Ga X As/ZnS core–shell QDs show a photoluminescence quantum yield (PL QY) of about 30% versus 11% for ZnSe shells. In conclusion, based on the analysis of PL decay and transient absorption (TA) dynamics, we surmise that electron trapping is the major reason for efficiency loss, providing a clear heterostructure design principle for realizing efficient NIR-emitting In 1–X Ga X As QDs.

Electron trapping↗
DOE OSTI2026

Nanoionics Drastically Accelerating Mass Transfer at Elevated Temperatures over 750 °C

Nanoionics were previously considered thermally unstable and infeasible for devices operating above 500 °C. Here, we elucidate the design principle for establishing stable nanoionics from various oxides. We utilized reversible solid oxide cells (SOCs) as the test bed and implemented nanoionics using atomic layer deposition (ALD). We demonstrate a straightforward, interface-controlled, practical approach to render a conformal, ∼15 nm thick ALD film, which initially thermodynamically favors the formation of a solid solution with the substrate into surface nanoionics with single or double layers of nanograins with random crystal orientations. The nanoionics exhibited conductivity estimated to be 7 orders of magnitude higher than that of their bulk-scale counterpart. They demonstrated conformability with uniform grain sizes of ∼15 nm, even after electrochemical operation for ∼500 h at 750 °C and 1000 h at 850 °C. The thermal stability and conductivity of such nanoionics represent a conceptual and technological framework in nanoionics.

atomic layer deposition↗