Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Improvements to an Explicit Algebraic Stress Model for Turbulent Jet Mixing Predictions

Modifications to key coefficients in a k − E based explicit algebraic stress model (EASM) are examined with the objective of improving the prediction of turbulent jet flows. The pressure strain coefficient, C2 and the turbulent diffusion coefficients, σk and σE were investigated. For a series of benchmark subsonic jets at heated and unheated conditions, lowering C2 from the default value of 0.36 to 0.10 resulted in a significant improvement in the jet mixing, when compared to experimental data. Changing σk and σE from default values of 1.00 and 1.4489, respectively, to 0.50 and 0.7244, respectively, improved the initial mixing rate, while reducing the farfield mixing rate and the peak turbulent kinetic energy along the centerline. A high-speed mixing layer was also investigated for performance of baseline and modified EASM coefficients, with similar results as for the jet cases. A flat plate boundary layer was briefly examined to determine the effects of changing the coefficients on the turbulent skin friction coefficient. The change to the pressure strain coefficient, C2 = 0.10 is recommended for future EASM calculation of jets flow; however, it is also recommended that the diffusion coefficients remain at their default values.

Turbulent Mixing↗

27 Al Pulsed Field Gradient, Diffusion–NMR Spectroscopy of Solvation Dynamics and Ion Pairing in Alkaline Aluminate Solutions

Here, pulsed field gradient nuclear magnetic resonance (PFG-NMR) measurements were successfully applied to the 27 Al (I = 5/2) nucleus in concentrated electrolytes to investigate the diffusion of aluminate ions [Al(OH) 4 – ] in simulant high-level nuclear waste (3 M NaOH) between 25 and 85 °C. The temperature-dependent diffusion coefficients obtained from 1 H, 23 Na, and 27 Al PFG-NMR were well fit by a Vogel–Fulcher–Tammann model and a power law equation. Comparison of 27 Al diffusion coefficients of 0.1 M Al(OH) 4 – in ~3 M MOH (where M = Na + , K + , (CH 3 ) 4 N + ) at room temperature varied in agreement with the expected changes in solution viscosity via Stokes–Einstein relationship, confirming that the dominant Al species at these conditions are Al(OH) 4 – monomers. This 27 Al PFG-NMR study extends an established methodology to a previously unexplored nucleus enabling this experimental technique to be leverage for exploring ion transport, speciation, and solution structure in concentrated electrolytes.

Diffusion↗

Accelerated kinetic Monte Carlo: A case study; vacancy and dumbbell interstitial diffusion traps in concentrated solid solution alloys

Vacancy and self-interstitial atomic diffusion coefficients in concentrated solid solution alloys can have a non-monotonic concentration dependence. Here, the kinetics of monovacancies and $\langle$100$\rangle$ dumbbell interstitials in Ni–Fe alloys are assessed using lattice kinetic Monte Carlo (kMC). The non-monotonicity is associated with superbasins, which impels using accelerated kMC methods. Detailed implementation prescriptions for first passage time analysis kMC (FPTA-kMC), mean rate method kMC (MRM-kMC), and accelerated superbasin kMC (AS-kMC) are given. The accelerated methods are benchmarked in the context of diffusion coefficient calculations. The benchmarks indicate that MRM-kMC underestimates diffusion coefficients, while AS-kMC overestimates them. In this application, MRM-kMC and AS-kMC are computationally more efficient than the more accurate FPTA-kMC. Our calculations indicate that composition dependence of migration energies is at the origin of the vacancy’s non-monotonic behavior. In contrast, the difference between formation energies of Ni–Ni, Ni–Fe, and Fe–Fe dumbbell interstitials is at the origin of their non-monotonic diffusion behavior. Additionally, the migration barrier crossover composition—based on the situation where Ni or Fe atom jumps have lower energy barrier than the other one—is introduced. KMC simulations indicate that the interplay between composition dependent crossover of migration energy and geometrical site percolation explains the non-monotonic concentration-dependence of atomic diffusion coefficients.

36 MATERIALS SCIENCE↗

Long-term modulation of galactic cosmic radiation and its model for space exploration

As the human exploration of space has received new attention in the United States, studies find that exposure to space radiation could adversely impact the mission design. Galactic Cosmic Radiation (GCR), with its very wide range of charges and energies, is particularly important for a mission to Mars, because it imposes a stiff mass penalty for spacecraft shielding. Dose equivalent versus shielding thickness calculations, show a rapid initial drop on exposure with thickness, but an asymptotic behavior at a higher shielding thickness. Uncertainties in the radiobiology are largely unknown. For a fixed radiation risk, this leads to large uncertainties in shielding thickness for small uncertainties in estimated dose. In this paper we investigate the application of steady-state, spherically-symmetric diffusion-convection theory of solar modulation to individual measurements of differential energy spectra from 1954 to 1989 in order to estimate the diffusion coefficient, kappa(r,t), as a function of time. We have correlated the diffusion coefficient to the Climax neutron monitor rates and show that, if the diffusion coefficient can be separated into independent functions of space and time: kappa(r,t)=K(t) k(sub 0) beta Pk(sub 1) (r), where beta is the particle velocity and P the rigidity, then (i) The time dependent quantity 1/K(t), which is proportional to the deceleration potential, phi(r,t), is linearly related to the Climax neutron monitor counting rate. (ii) The coefficients obtained from hydrogen or helium intensity measurements are the same. (iii) There are different correlation functions for odd and even solar cycles. (iv) The correlation function for the Climax neutron monitor counting rate for given time, t, can be used to estimate mean deceleration parameter phi(t) to within +/- 15% with 90% confidence. We have shown that k(r,t) determined from hydrogen and/or helium data, can be used to fit the oxygen and iron differential energy spectra with a root mean square error of about +/- 10%, and essentially independent of the particle charge or energy. We have also examined the ion chamber and C-14 measurements which allow the analysis to be extended from the year 1906 to 1990. Using this model we have defined reference GCR spectra at solar minimum and solar maximum. These can be used for space exploration studies and provide a quantitative estimate of the error in dose due to changes in GCR intensities.

Badhwan, G. D.↗

EMIC Wave-Driven Bounce Resonance Scattering of Energetic Electrons in the Inner Magnetosphere

While electromagnetic ion cyclotron (EMIC) waves have been long studied as a scattering mechanism for ultrarelativistic (megaelectron volt) electrons via cyclotron‐resonant interactions, these waves are also of the right frequency to resonate with the bounce motion of lower‐energy (approximately tens to hundreds of kiloelectron volts) electrons. Here we investigate the effectiveness of this bounce resonance interaction to better determine the effects of EMIC waves on subrelativistic electron populations in Earth's inner magnetosphere. Using wave and plasma parameters directly measured by the Van Allen Probes, we estimate bounce resonance diffusion coefficients for four different events, illustrative of wave and plasma parameters to be encountered in the inner magnetosphere. The range of electron energies and pitch angles affected is examined to better assess the realistic effects of EMIC‐driven bounce resonance on energetic electron populations based on actual, locally observed event‐based parameters. Significant local diffusion coefficients (~ > 10(exp −6) s(exp −1)) for 50‐ to 100‐keV electrons are achieved for both H+ band wave events as well as He+ band, with diffusion coefficients peaking for near‐90° pitch angles but remaining elevated for intermediate ones as well. Diffusion coefficients for higher‐energy 200‐keV electrons are typically multiple orders of magnitude lower (ranging from 10(exp −11) to 10(exp −6) s(exp −1)) and often peak at lower pitch angles (~20–30°). These results suggest that both H+ and He+ band EMIC waves can play a role in shaping lower‐energy electron dynamics via bounce‐resonant interactions, in addition to their role in relativistic electron loss via cyclotron resonance.

Blum, L. W.↗

Oxygen-18 tracer study of the passive thermal oxidation of silicon

This work focuses on the thermal oxidation of silicon near 1273 K using the double-tracer oxidation method. The results confirm that oxidation occurs by the transport of electrically neutral nonnetwork oxygen through the interstitial space of the vitreous silica (v-SiO2) scale. Simultaneously, self- (or isotopic-) diffusion occurs in the network, resulting in characteristic isotopic fraction distributions near the gas-scale interface. The self-diffusion coefficients calculated from these profiles agree with those reported for tracer diffusion in v-SiO2, and the diffusion coefficient calculated from the scale growth is consistent with reported O2 permeation data. An important parameter that describes the double-oxidation behavior is a ratio relating the scale thickness grown during the second oxidation, the network self-diffusion coefficient for oxygen, and the time of the second oxidation.

Cawley, J. D.↗

Cosmic ray propagation and dark matter in light of the latest AMS-02 data

The AMS-02 experiment is measuring the high energy cosmic rays with unprecedented accuracy. We explore the possibility of determining the cosmic-ray propagation models using the AMS-02 data alone. A global Bayesian analysis of the constraints on the cosmic-ray propagation models from the preliminary AMS-02 data on the Boron to Carbon nuclei flux ratio and proton flux is performed, with the assumption that the primary nucleon source is a broken power law in rigidity. The ratio of the diffusion coefficient D{sub 0} to the diffusive halo height Z{sub h} is determined with high accuracy D{sub 0}/Z{sub h}≃2.00±0.07 cm{sup 2}s{sup −1}kpc{sup −1}, and the value of the halo width is found to be Z{sub h}≃3.3 kpc with uncertainty less than 50%. As a consequence, the typical uncertainties in the positron fraction predicted from dark matter (DM) annihilation is reduced to a factor of two, and that in the antiproton flux is about an order of magnitude. Both of them are significantly smaller than that from the analyses prior to AMS-02. Taking into account the uncertainties and correlations in the propagation parameters, we derive conservative upper limits on the cross sections for DM annihilating into various standard model final states from the current PAMELA antiproton data. We also investigate the reconstruction capability of the future high precision AMS-02 antiproton data on the DM properties. The results show that for DM particles lighter than ∼100 GeV and with typical thermal annihilation cross section, the cross section can be well reconstructed with uncertainties about a factor of two for the AMS-02 three-year data taking.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diffusion and phase formation in the γ-uranium-technetium system

Phase formation in the U-Tc binary system at 800 °C was investigated using a diffusion couple experiment. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) identified four novel potential intermetallic phases - U 7 Tc 3 , U 13 Tc 12 , U 3 Tc 5 , and UTc 4 . Diffusion coefficients were calculated for the intermetallic phases using the Boltzmann-Matano method and were respectively found to be – 120, 38.2, 15.6, and 1.51 × 10 −18 m 2 /s. Tc also exhibits a solid-solution phase with high penetration into the U with a diffusion coefficient of ∼ 10 −14 m 2 /s. Furthermore, these findings expand the number of known U-Tc phases and provide the first diffusion coefficients for the U-Tc system, and contribute valuable data to the broader field of actinide metallurgy.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamic properties of different liquid states in systems with competing interactions studied with lysozyme solutions

Recent studies of colloidal systems with a short-range attraction and long-range repulsion (SALR) have been demonstrated to have a generalized phase diagram with multiple liquid states defined by their structures. In this paper, we identify the different liquid states of previous experimentally studied lysozyme samples within this proposed generalized state diagram and explore the dynamic properties of each liquid state. We show that most lysozyme samples studied here and previously at low and intermediate concentrations are dispersed fluids while a few high concentration samples are randomly percolated liquids. In the dispersed fluid region, the short-time diffusion coefficient measured by neutron spin echo agrees well with the long time diffusion coefficient estimated with the solution viscosity. This dynamic feature is maintained even for some samples in the random percolated region. However, the short-time and long-time diffusion coefficients of random percolated fluids deviate at larger concentration and attraction strength. At high enough concentrations, the mean square displacement can be as slow as those of many glassy colloidal systems at time scales near the characteristic diffusion time even though these lysozyme samples remain in liquid states at the long-time limit. Here, we thus identify the region in the generalized phase diagram where these equilibrium states with extremely slow local dynamics exist relative to bulk percolation and kinetic arrest (gel and glassy) transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary Compendium of the Initial Conditions and Evolution of the Fundamental Interactions of SiC with Ag and Pd

Tri-structural isotropic (TRISO) particles are the fuel of choice for very-high temperature reactors. At the core, these spherical particles consist of an inner fuel kernel of UO{sub 2}, UC{sub 2} or a combination of both, which is coated radially outward by successive layers of low density pyrolytic graphite, an inner high density pyrolytic graphite layer, silicon carbide (SiC) and an outer high density pyrolytic graphite layer. SiC is the main diffusion barrier against the release of fission products due to its hardness and high melting point. Irradiation testing of TRISO particles indicates that trace amounts of metallic fission products can damage or potentially escape through the barrier layer. Surrogate experimental studies have previously been performed by various methods seeking to shed light on and explain the diffusion behavior of Ag and Pd. Although some of these experiments have yielded realistic diffusion coefficients the discrepancy of results between different groups is such that the essential details of the diffusive behavior are still to be fully understood. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. Theoretical simulations of the diffusion of Ag through SiC have been exhaustive but typically yield bulk diffusion coefficients that due to the nature of bulk diffusion phenomena (i.e. slow diffusion) the diffusion coefficients are calculated to be orders of magnitude lower than what experimental observations suggest. This in part is due to the difficulty in simulating realistic models that include various polymorphs of SiC, and the dynamical structural transformations that SiC undergoes in the TRISO environment (which are also to be explained). The result is a particularly challenging problem to solve given that the initial conditions of the interactions of Ag and Pd with SiC are difficult to address, both in theoretical models and surrogate experiments. In order to improve these models the approach taken here is to consider fundamental interactions between Ag and SiC that take place in short time scales by varying the initial environmental conditions, i.e. annealing temperature and time, initial amounts of the metallic species (M) Ag, Pd in SiC/M/SiC multilayers. This work aims to understand the fundamental physical and chemical interactions that take place at the interface of SiC and Ag/Pd, and which give rise to the observed diffusion behavior of these metallic species in TRISO particles. In order to do so we have synthesized SiC/Ag/SiC and SiC/Pd/SiC multilayers of various thicknesses by PLD and characterized them using SEM/EDS. Initial results show that upon annealing Ag agglomerates and ruptures the SiC layer to be released. In the case of Pd a strong chemical interaction is deduced from the slow interlayer diffusion and limited release. Further studies using photoelectron spectroscopy and RHEED will be carried out in order obtain detailed information on the chemical and physical transitions that undergo upon annealing of these systems. (authors)

36 MATERIALS SCIENCE↗

The velocity correlation function in cosmic-ray diffusion theory

It is shown that Earl's (1973) eigenvalue sum for the cosmic-ray spatial diffusion coefficient parallel to the mean magnetic field is precisely equivalent to the time integral of the particle-velocity correlation function parallel to the mean field. A derivation due to Kubo (1957) is applied to cosmic-ray pitch-angle scattering, and it is proven that all nine components of the cosmic-ray diffusion tensor can be expressed as integrals over the velocity correlation function. A pitch-angle correlation function is derived, and the effect of long-wavelength turbulence on the velocity correlation function and spatial diffusion coefficients is examined. Application of the velocity-correlation method to a realistic case involving both pitch-angle scattering and appreciable fluctuation in the direction of the local field indicates that long-wavelength turbulence in the local field reduces the parallel diffusion coefficient and places an upper limit on the ratio of the perpendicular to parallel diffusion coefficients.

Forman, M. A.↗

Analysis of Silver Release from Furnace-Tested TRISO Particles

High temperature testing of intact TRISO particles previously irradiated in the AGR-5/6/7 experiment was performed in the Furnace for Irradiated TRISO Testing (FITT) to directly confirm diffusive release of silver and europium from intact TRISO particles. Testing was conducted from 1,100–1,600°C for exposure times up to 100 h to directly confirm silver through layer release below safety testing temperatures. The FITT analysis showed highest levels of silver release at 1,300–1,400°C which confirms athermal release behaviors previous observed in step-wise and transient safety tests. Additionally, release was non-uniform with some particles releasing a majority of their inventory while others did not appear to release silver under identical testing conditions, which was consistent with historic observations. An assessment of the effective silver diffusion coefficient in the SiC layer was conducted and indicated maximum values in the 1,300–1,400°C range. The magnitude of the calculated diffusion coefficients also exceeded currently accepted diffusion coefficients. The release behavior of europium from intact particles was also analyzed in FITT for at 1,450–1,550°C for 500 h to 750 h. Direct confirmation of europium release below safety testing temperatures was confirmed absent contributions from matrix release. The analysis indicated europium release follows a general Arrhenius behavior and suggests general uniform release and indicates irradiation conditions influence observed release response. Calculated diffusion kinetics agree well with historic experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Diffusion and Adsorption of Uranyl Carbonate Species in Nanosized Mineral Fractures

Atomistic simulations were performed to study the diffusion and adsorption of Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3} and of some of its constituent species, i.e., UO{sub 2}{sup 2+}, CO{sub 3}{sup 2-}, and UO{sub 2}CO{sub 3}, in feldspar nano-sized fractures. Feldspar is important to uranium remediation efforts at the U.S. Department of Energy Hanford site as it has been found in recent studies to host contaminants within its intragrain fractures. In addition, uranyl carbonate species are known to dominate U(VI) speciation in conditions relevant to the Hanford site. Molecular dynamics (MD) simulations showed that the presence of the feldspar surface diminishes the diffusion coefficients of all the species considered in this work and that the diffusion coefficients do not reach their bulk aqueous solution values in the center of a 2.5 nm fracture. Moreover, the MD simulations showed that the rate of decrease in the diffusion coefficients with decreasing distance from the surface is greater for larger adsorbing species. Free energy profiles of the same species adsorbing on the feldspar surface revealed a large exothermic free energy of adsorption for UO{sub 2}{sup 2+} and UO{sub 2}CO{sub 3}, which are able to adsorb to the surface with their uranium atom directly bonded to a surface hydroxyl oxygen, whereas adsorption of CO{sub 3}{sup 2-} and Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3}, which attach to the surface via hydrogen bonding from a surface hydroxyl group to a carbonate oxygen, was calculated to be either only slightly exothermic or endothermic.

08 HYDROGEN↗

Reduced diffusion and enhanced retention of multiple radionuclides from pore structure characterization of barrier materials for enhanced repository performance

Fluid flow and chemical transport in porous media are the macroscopic consequences of pore structure, which integrates geometry (e.g., pore size and surface area, pore-size distribution) and topology (e.g., pore connectivity). Low-permeability geological media whose pores are poorly interconnected will exhibit the characteristics of anomalous diffusion and sample size-dependent effective porosity, which will strongly impact long-term net diffusion and retention of radionuclides in geological repository settings involving different host rocks and barrier materials. A suite of innovative and complementary experimental approaches is utilized to study the microscopic pore structure and macroscopic fluid flow & chemical transport for a range of host rocks and barrier materials, in addition to standard clay minerals and reference rocks. With a particular focus on quantifying the presence and magnitude of “isolated” pores for a reduced effective porosity in low-permeability geomedia, the integrated methodologies for basic properties and pore structure characterization of these geomedia include X-ray diffraction, thin section petrography, grain size distribution, water immersion porosimetry after vacuum-pulling for full saturation, mercury intrusion porosimetry, nitrogen physisorption, scanning electron microscopy, X-ray computed tomography, and (ultra-)small angle neutron (X-ray) scattering. In addition, custom-designed gas diffusion, tracer recipe involving a range of anionic and cationic chemicals with subsequent analyses by laser ablation and inductively coupled plasma-mass spectrometry, along with batch sorption, column transport, and imbibition tests were conducted for coupled effects of pore structure and chemical retention/transport. From the perspectives of pore structure in conjunction with multiple and complementary approaches to examining a range of sample sizes under different observational scales, we find that the poor pore connectivity is prevalent in low-permeability media (mudstone and crystalline rock) that is related to geological processes (e.g., compaction, diagenesis and thermal maturation). For example, the deep and organic matter-rich mudstones have a much smaller effective porosity than the total porosity (as a result of poor pore connectivity) and associated diffusion coefficient, and the effective porosity & diffusion coefficients are also dependent upon the sample sizes used in the measurement. Similarly, most of the pore space in the shallow mudstone is also controlled by pore-throat diameters in the 5-50 nm range of intergranular pore types from its fine-grained nature, but with an overall good pore connectivity. However, the nm-sized pore space (physically pore-network architecture) and strong sorption capacities (chemical retention from clay minerals) of both shallow and deep mudstones lead to the synergistic retention of cationic radionuclides and their utilities as effective host rocks and barrier materials. Our unique approaches of studying how the micro-scale pore structure affect macro-scale fluid flow, diffusion & retention, and chemical transport produce improved mechanistic understanding, and realistic quantification, of diffusion and retention of typical radionuclides in a range of generic host rocks and barrier materials (clay/shale, salt, crystalline rock, and tuff), with the overall results leading to scientifically-based understanding of enhanced isolation (from both diffusion and retention) of radionuclides and improved confidence on the long-term performance of geological repository to store high-level radioactive wastes. In addition to the training of 25 undergraduates, graduates, and postdocs of UTA, the scientists (organizations) involved in performing this work (e.g., discussion, sample sharing, and operation of SANS and SAXS instruments) include Ed Matteo, Yifeng Wang, and Kristopher Kuhlman (Sandia National Laboratories), Jens Birkholzer, Liange Zheng, Tim Kneafsey, and Sharon Borglin (Lawrence Berkeley National Laboratory), Mavrik Zavarin (Lawrence Livermore National Laboratory), Yukio Tachi and Yuta Fukatsu (Japan Atomic Energy Agency), Mieke de Craen (Euridice, Belgium), Markus Bleuel (NIST), Wei-Ren Chen, Gergely Nagy, Changwoo Do, William Heller, Larry Anovitz, and Kenneth Littrell (ORNL), as well as Jan Illvsky, Ivan Kuzmenko, Ju-Sang Park and Jon Almers (ANL). Key deliverables include a total of 13 peer-reviewed journal articles (nine published and three under review), 23 presentations at scientific conferences (AAPG, AAPG Southwest Section, AGU, Asian Clay Conference, GSA, GSA South-Central Section, IHLRWM, InterPore, International Conference on Chemistry and Migration Behavior of Actinides and Fission Products in the Geosphere, International Conference on Coupled Processes in Fractured Geological Media: Observation, Modeling and Application), and academic institutions (UTA, New Mexico State University; University of Poitiers, France; University of Helsinki, Finland; Uppsala University, Sweden; Istanbul Technical University, Turkey) and other organizations (Andra, France; Posiva Oy, Finland).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Unravelling chloride transport/microstructure relationships for blended-cement pastes with the mini-migration method

A chloride mini-migration method is proposed to estimate effective diffusion coefficients at the scale of the cement paste and to investigate mechanisms with complementary microstructure analyses on the same material. Blended-cement pastes with a wide range of properties were investigated in this study: systems at w/b = 0.3–0.5 including Portland cement, white Portland cement, slag-Portland cement, fly ash, glass powder, and/or limestone and calcined clay. Comparisons showed the relative and combined importance of three main parameters on the effective diffusion coefficient: the porosity, the pore connectivity parameter and the conductivity of the pore solution (low values of the latter two are generally key aspects of the high resistance of blended-cement systems against chloride ingress). Notably, a general correlation for all the investigated systems was established between the effective diffusion coefficient and the bulk conductivity (whereas no simple correlation was observed between the effective diffusion coefficient and the formation factor or the pore connectivity parameter).

36 MATERIALS SCIENCE↗

Multispecies diffusion models: A study of uranyl species diffusion

Rigorous numerical description of multi-species diffusion requires coupling of species, charge, and aqueous and surface complexation reactions that collectively affect diffusive fluxes. The applicability of a fully coupled diffusion model is, however, often constrained by the availability of species self-diffusion coefficients, as well as by computational complication for imposing charge conservation. In this study, several diffusion models with variable complexity in charge and species coupling were formulated and compared to describe reactive multi-species diffusion in groundwater. Diffusion of uranyl [U(VI)] species was used as an example in demonstrating the effectiveness of the models in describing multi-species diffusion. Numerical simulations found that a diffusion model with a single, common diffusion coefficient for all species was sufficient to describe multi-species U(VI) diffusion under steady-state condition of major chemical composition, but not under transient chemical conditions. Simulations revealed that a fully coupled diffusion model can be well approximated by a component-based diffusion model, which considers difference in diffusion coefficients between chemical components, but not between the species within each chemical component. This treatment significantly enhanced computational efficiency at the expense of minor charge conservation. The charge balance in the component-based diffusion model can be rigorously enforced, if necessary, by adding an artificial kinetic reaction term induced by the charge separation. The diffusion models were applied to describe U(VI) diffusive mass transfer in intragranular domains in two sediments collected from US Department of Energy's Hanford 300A where intragrain diffusion is a rate-limiting process controlling U(VI) adsorption and desorption. The grain-scale reactive diffusion model was able to describe U(VI) adsorption/desorption kinetics that has been described using a semi-empirical, multi-rate model. Compared with the multi-rate model, the diffusion models have the advantage to provide spatiotemporal speciation evolution within the diffusion domains.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Disintegration in Compost Conditions and Water Uptake of Green Composites from Poly(Lactic Acid) and Hazelnut Shell Flour

Green composites of poly(lactic acid)-PLA and hazelnut shell flour (HSF) with and without epoxidized linseed oil (ELO) as plasticizer/compatibilizer were subjected to different aging conditions such as water uptake by immersion and disintegration in compost soil. The effect of the hydrolytic degradation was analyzed by measuring the weight gain as a function of the immersion time in water and calculating the corresponding diffusion coefficients. As expected, the water diffusion coefficient increases with HSF content while no remarkable change is obtained for plasticized compositions with ELO. Differential scanning calorimetry reveals a noticeable increase in crystallinity after the degradation process by water immersion. Degradation in controlled compost soil was followed thorough measurements of weight changes. In general, the weight change for a particular degradation time is lower as the HSF content increases. In addition, presence of ELO as plasticizer/compatibilizer delays the degradation process in compost soil. Scanning electron microscopy highlighted a noticeable deterioration of aged samples after 2 weeks with multiple crack formation and high surface abrasion due to microbial activity after 4 weeks.

36 MATERIALS SCIENCE↗

A curved pathway for oxygen interstitial diffusion in aluminum

Here, the diffusion of interstitial oxygen (O) in fcc aluminum (Al) has been studied using first-principles and the diffusion coefficient has been calculated. Whereas interstitial atoms in fcc systems are typically found to hop directly between interstitial centres, the diffusion pathway for interstitial O in fcc Al was calculated to have a curved minimum energy pathway with an energy barrier of 0.95 eV. The barrier was found to be off-centre of a neighboring octahedral site. Also unlike the majority of fcc metals, O prefers to sit in the tetrahedral interstitial site as opposed to the octahedral site. The calculated O diffusion coefficient is on the same order of magnitude of the diffusion coefficient of O in other fcc metals. The preferred interstitial site, diffusion pathway and vacancy binding energy were found to be related to the bond length of O with neighboring Al atoms.

36 MATERIALS SCIENCE↗