Cationic shield mediated electrodeposition stability in metal electrodes
Mechanistic understanding of coupled reaction kinetics, diffusive transport and electrostatic shield mediated electrodeposition stability is elucidated.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mechanistic understanding of coupled reaction kinetics, diffusive transport and electrostatic shield mediated electrodeposition stability is elucidated.
Hydrogels are characterized by substantial volume changes in response to external stimuli, making them promising candidates for developing smart materials with enhanced adaptability and responsiveness. By integrating chemical reactions, hydrogels acquire dynamic and tunable responsiveness to external stimuli through chemo‐mechanical coupling, expanding their potential in emerging applications. However, capturing their transient behavior remains challenging due to the complex interplay of chemical reactions, solvent transport, and polymer network deformation. Classical theories capture equilibrium swelling but fail to describe time‐dependent phenomena. To address this, a time‐dependent continuum model is developed that explicitly couples these processes. Volume phase transition in hydrogels with homogeneous chemical reactions is investigated, then the effects of reaction kinetics on these transitions are analyzed. The coupling of these mechanisms is further explored through a study of transient mechanical instabilities. To illustrate the impact of distinct reaction and diffusion timescales, a photo‐active gripper is studied for robotic applications. Finally, a photo‐active microswimmer that exhibits non‐reciprocal motion is proposed to highlight the solvent diffusion for locomotion at the micro‐ and nano‐ scales. The work establishes that transient dynamics of chemo‐mechanical hydrogels generate functions not accessible by steady state models and provides a predictive platform for designing adaptive materials in emerging applications.
The nature of barriers for atomic transport in In{sub 2}S{sub 3} layers has been varied by addition of chlorine. Diffusion of Cu(I) from a removable CuSCN source was used to probe the variation of the barriers. The Meyer-Neldel (compensation) rule was observed with a Meyer-Neldel energy (E{sub MN}) and a proportionality prefactor (D{sub 00}) amounting to 40 meV and 5 × 10{sup −14} cm{sup 2}/s, respectively. D{sub 00} shows that the elementary excitation step is independent of the specific mechanism and nature of the barrier including different densities of Cl in In{sub 2}S{sub 3}. The value of E{sub MN} implies that coupling of the diffusing species to an optical-phonon bath is the source of the multiple excitations supplying the energy to overcome the diffusion barriers.
In this paper, we compute the momentum diffusion coefficients of heavy quarks, κ ∥ and κ ⊥ , in a strong magnetic field B along the directions parallel and perpendicular to B, respectively, at the leading order in QCD coupling constant α s . We consider a regime relevant for the relativistic heavy ion collisions, α s eB << T 2 << eB, so that thermal excitations of light quarks are restricted to the lowest Landau level (LLL) states. In the vanishing light-quark mass limit, we find κ LO ⊥ ∝ α 2 s TeB in the leading order that arises from screened Coulomb scatterings with (1+1)-dimensional LLL quarks, while κ ∥ gets no contribution from the scatterings with LLL quarks due to kinematic restrictions. We show that the first nonzero leading order contributions to κ LO ∥ come from the two separate effects: 1) the screened Coulomb scatterings with thermal gluons, and 2) a finite light-quark mass m q . The former leads to κ LO,gluon ∥ ∝ α 2 s T 3 and the latter to κ LO,massive ∥ ∝ α s (α s eB) 1/2 m 2 q . Based on our results, we propose a new scenario for the large value of heavy-quark elliptic flow observed in RHIC and LHC. Namely, when κ ⊥ >> κ ∥ , an anisotropy in drag forces gives rise to a sizable amount of the heavy-quark elliptic flow even if heavy quarks do not fully belong to an ellipsoidally expanding background fluid.
Multiscale and multiphysics simulations are two rapidly developing fields of scientific computing. Efficient coupling of continuum (deterministic or stochastic) constitutive solvers with their discrete (stochastic, particle-based) counterparts is a common challenge in both kinds of simulations. We focus on interfacial, tightly coupled simulations of diffusion that combine continuum and particle-based solvers. The latter employs the reverse Brownian motion (rBm), a Monte Carlo approach that allows one to enforce inhomogeneous Dirichlet, Neumann, or Robin boundary conditions and is trivially parallelizable. We discuss numerical approaches for improving the accuracy of rBm in the presence of inhomogeneous Neumann boundary conditions and alternative strategies for coupling the rBm solver with its continuum counterpart. Numerical experiments are used to investigate the convergence, stability, and computational efficiency of the proposed hybrid algorithm.
A recently developed subgrid model for soot dynamics [H. El-Asrag, T. Lu, C.K. Law, S. Menon, Combust. Flame 150 (2007) 108-126] is used to study the soot formation in a non-premixed turbulent flame. The model allows coupling between reaction, diffusion and soot (including soot diffusion and thermophoretic forces) processes in the subgrid domain without requiring ad hoc filtering or model parameter adjustments. The combined model includes the entire process, from the initial phase, when the soot nucleus diameter is much smaller than the mean free path, to the final phase, after coagulation and aggregation, where it can be considered in the continuum regime. A relatively detailed but reduced kinetics for ethylene-air is used to simulate an experimentally studied non-premixed ethylene/air jet diffusion flame. Acetylene is used as a soot precursor species. The soot volume fraction order of magnitude, the location of its maxima, and the soot particle size distribution are all captured reasonably. Along the centerline, an initial region dominated by nucleation and surface growth is established followed by an oxidation region. The diffusion effect is found to be most important in the nucleation regime, while the thermophoretic forces become more influential downstream of the potential core in the oxidation zone. The particle size distribution shows a log-normal distribution in the nucleation region, and a more Gaussian like distribution further downstream. Limitations of the current approach and possible solution strategies are also discussed. (author)
The results of a stagnation-line analysis of the radiative heating of a phenolic-nylon ablator are reported. The analysis includes flowfield coupling with the ablator surface, equilibrium chemistry, multicomponent or binary diffusion and a coupled line and continuum radiation calculations. Users manual and operating instructions for the computer programs listed in the report are included.
Localized, transient heating of materials using micro-scale, highly absorbing laser light has been used in many industries to anneal, melt and ablate material with high precision. Accurate modeling of the relative contributions of conductive, convective and radiative losses as a function of laser parameters is essential to optimizing micro-scale laser processing of materials. In bulk semi-transparent materials such as silicate glass melts, radiation transport is known to play a significantly larger role as the temperature increases. Conventionally, radiation is treated in the frequency-averaged diffusive limit (Rosseland approximation). However, the role and proper treatment of radiative processes under rapidly heated, high thermal gradient conditions, often created through laser-matter interactions, is at present not clear. Starting from the radiation transport equation for homogeneous, refractive lossy media, they derive the corresponding time-dependent multi-frequency diffusion equations. Zeroth and first moments of the transport equation couple the energy density, flux and pressure tensor. The system is closed by neglecting the temporal derivative of the flux and replacing the pressure tensor by its diagonal analogue. The radiation equations are coupled to a diffusion equation for the matter temperature. They are interested in modeling infrared laser heating of silica over sub-millimeter length scales, and at possibly rapid rates. Hence, in contrast to related work, they retain the temporal derivative of the radiation field. They derive boundary conditions at a planar air-silica interface taking account of reflectivities obtained from the Fresnel relations that include absorption. The effect of a temperature-dependent absorption index is explored through construction of a multi-phonon dielectric function that includes mode dispersion. The spectral dimension is discretized into a finite number of intervals yielding a system of multigroup diffusion equations. Simulations are presented. To demonstrate the bulk heat loss due to radiation and the effect of the radiation's temporal derivative, they model cooling of a silica slab, initially at 2500 K, for 10 s. Retaining the derivative enables correctly modeling the loss of photons initially present in the slab. Other simulations model irradiating silica discs (of approximately 5 mm radii and thickness) with a CO2 laser: {lambda} = 10.59 and 4.6 um, Gaussian profile, r{sub 0} = 0.5 mm for 1/e decay. By surrounding the disks in room-temperature air, they make use of the boundary conditions described above.
Starting from the radiation transport equation for homogeneous, refractive lossy media, we derive the corresponding time-dependent multifrequency diffusion equations. Zeroth and first moments of the transport equation couple the energy density, flux and pressure tensor. The system is closed by neglecting the temporal derivative of the flux and replacing the pressure tensor by its diagonal analogue. The system is coupled to a diffusion equation for the matter temperature. We are interested in modeling annealing of silica (SiO{sub 2}). We derive boundary conditions at a planar air-silica interface taking account of reflectivities. The spectral dimension is discretized into a finite number of intervals leading to a system of multigroup diffusion equations. Three simulations are presented. One models cooling of a silica slab, initially at 2500 K, for 10 s. The other two are 1D and 2D simulations of irradiating silica with a CO{sub 2} laser, {lambda} = 10.59 {micro}m. In 2D, we anneal a disk (radius = 0.4, thickness = 0.4 cm) with a laser, Gaussian profile (r{sub 0} = 0.5 mm for 1/e decay).
Abstract Despite their fundamental role in determining many important properties of materials, detailed momentum-dependent information on the strength of electron–phonon and phonon–phonon coupling across the entire Brillouin zone has remained elusive. Ultrafast electron diffuse scattering (UEDS) is a recently developed technique that is making a significant contribution to these questions. Here, we describe both the UEDS methodology and the information content of ultrafast, photoinduced changes in phonon-diffuse scattering from single-crystal materials. We present results obtained from Ni, WSe 2 , and TiSe 2 , materials that are characterized by a complex interplay between electronic (charge, spin) and lattice degrees of freedom. We demonstrate the power of this technique by unraveling carrier–phonon and phonon–phonon interactions in both momentum and time and following nonequilibrium phonon dynamics in detail on ultrafast time scales. By combining ab initio calculations with ultrafast diffuse electron scattering, insights into electronic and magnetic dynamics that impact UEDS indirectly can also be obtained. Graphic Abstract
In nature, many complex multi‐physics coupling problems exhibit significant diffusivity inhomogeneity, where one process occurs several orders of magnitude faster than others temporally. Simulating rapid diffusion alongside slower processes demands intensive computational resources due to the necessity for small time steps. To address these computational challenges, we have developed an efficient numerical solver named Finite Difference informed Random Walker (FDiRW). In this study, we propose a GPU‐accelerated, mixed‐precision configuration for the FDiRW solver to maximize efficiency through GPU multi‐threaded parallel computation and lower precision computation. Numerical evaluation results reveal that the proposed GPU‐accelerated mixed‐precision FDiRW solver can achieve a 117× speedup over the CPU baseline, while an additional 1.75× speedup is achieved by employing lower precision GPU computation. Notably, for large model sizes, the GPU‐accelerated mixed‐precision FDiRW solver demonstrates strong scaling with the number of nodes used in simulation. When simulating radionuclide absorption processes by porous wasteform particles with a medium‐sized model of 192 × 192 × 192, this approach reduces the total computational time to 10 min, enabling the simulation of larger systems with strongly inhomogeneous diffusivity.
The classic electrochemical catalytic mechanism, often referred to as the EC{prime} mechanism, is traditionally represented by the two reactions A + e {r_reversible} B (E{sub A/B}{sup 0}, k{sub A/B}{sup 0}, {alpha}{sub A/B}) and B + P {r_reversible} A + Q (K{sub eq}, k{sub f}, k{sub b}). Implicit in this mechanism is the additional heterogeneous electron transfer P + e {r_reversible} Q (E{sub P/Q}{sup 0}, k{sub P/Q}{sup 0}, {alpha}{sub P/Q}). To observe EC{prime} behavior, the following conditions must be met (we focus on cyclic voltammetric responses): (1) E{sub P/Q}{sup 0} > E{sub A/B}{sup 0} (ensuring that K{sub eq} > 1), (2) k{sub P/Q}{sup 0}c{sub P} exp[-{alpha}{sub P/Q}(F/RT)(E-E{sub P/Q}{sup 0})]/(0.446c{sub A}(FD{sub A}|v|/RT){sup 1/2}) << 1 over the potential range of interest (ensuring that the reaction P + e {r_reversible} Q does not occur to any significant extent relative to the peak current for reaction A + e {r_reversible} B alone), (3) k{sub f}c{sub P}RT/F|v| > 1 (ensuring that the catalytic effect is significant). We offer arguments based on Marcus theory that when condition 2 is met, fulfilling condition 3 will be difficult. This could explain why EC{prime} behavior is rare. In the present work we show that EC{prime}-like cyclic voltammetric responses can be obtained even when P + e {r_reversible} Q is facile if D{sub P,Q} (the diffusion coefficient for the substrate-couple species P and Q) is much smaller than D{sub A,B} (the diffusion coefficient for the mediator-couple species A and B). When D{sub P,Q}/D{sub A,B} is sufficiently small, the system behavior becomes identical to that seen for the classical EC{prime} system. We suggest that this 'quasicatalytic' behavior should be considered when EC{prime}-like behavior is observed and when the electrochemical system involves a substrate couple whose diffusion coefficients are much smaller than those of the mediator couple. As has been known for some time, when the diffusion coefficients of species A, B, P, and Q are identical (an assumption commonly made to simplify theoretical analysis) and when both heterogeneous electron transfers are reversible, the homogeneous kinetics have no effect on the cyclic voltammetric response - even though the distribution of species in the diffusion layer is dramatically altered.
We performed measurements at room temperature for a GaAs/AlGaAs multiple quantum well grown on GaAs(110) using a time-resolved microscopic photoluminescence (micro-PL) technique to find what effects spin diffusion had on the measured electron spin relaxation time, τ{sub s}, and developed a method of estimating the spin diffusion coefficient, D{sub s}, using the measured data and the coupled drift-diffusion equations for spin polarized electrons. The spatial nonuniformities of τ{sub s} and the initial degree of electron spin polarization caused by the pump intensity distribution inside the focal spot were taken into account to explain the dependence of τ{sub s} on the measured spot size, i.e., a longer τ{sub s} for a smaller spot size. We estimated D{sub s} as ∼100 cm{sup 2}/s, which is similar to a value reported in the literature. We also provided a qualitative understanding on how spin diffusion lengthens τ{sub s} in micro-PL measurements.
Abstract We present a new pore‐scale model for multicomponent advective‐diffusive transport with coupled mineral dissolution and precipitation. Both dissolution and precipitation are captured simultaneously by introducing a phase transformation vector field representing the direction and magnitude of the overall phase change. An effective viscosity model is adopted in simulating fluid flow during mineral dissolution‐precipitation that can accurately capture the velocity field without introducing any empirical parameters. The proposed approach is validated against analytical solutions and interface tracking simulations in simplified structures. After validation, the proposed approach is employed in modeling realistic rocks where mineral dissolution and precipitation are dominant at different locations. We have identified three regimes for mineral dissolution‐precipitation coupling: (a) compact dissolution‐precipitation where dissolution is dominant near the inlet and precipitation is dominant near the outlet, (b) wormhole dissolution with clustered precipitation where dissolution generates wormholes in the main flow paths and precipitation clogs the secondary flow paths, and (c) dissolution dominant where all solid grains are gradually dissolved. In the three regimes, the proposed approach provides reliable porosity‐permeability relationships that cannot be described well by traditional macroscale models. We find that the permeability can increase while the overall porosity decreases when the main flow paths are expanded by dissolution and adjacent pore spaces are clogged by precipitation.
Not Available
The specular reflection process is shown to be a key aspect of radiation transfer by plant canopies. Polarization measurements are demonstrated as the tool for determining the specular and diffuse portions of the canopy radiance. The magnitude of the specular fraction of the reflectance is significant compared to the magnitude of the diffuse fraction. Therefore, it is necessary to consider specularly reflected light in developing and evaluating light-canopy interaction models for wheat canopies. Models which assume leaves are diffuse reflectors correctly predict only the diffuse fraction of the canopy reflectance factor. The specular reflectance model, when coupled with a diffuse leaf model, would predict both the specular and diffuse portions of the reflectance factor. The specular model predicts and the data analysis confirms that the single variable, angle of incidence of specularly reflected sunlight on the leaf, explains much of variation in the polarization data as a function of view-illumination directions.
We present a transferable force field for water in proton-exchanged, alkali (Li, Na, K, Rb, and Cs) metal-exchanged, and alkaline-earth (Mg, Ca, Sr, and Ba) metal-exchanged zeolites. The fitting methodology is based on adsorbate–adsorbent interaction energies obtained from periodic density functional theory calculations and corrected using the coupled-cluster method applied to small model clusters. To ensure an accurate prediction of both adsorption and diffusion properties of water, sets of configurations that sample both adsorption sites and intracrystalline hopping transition states were used in the fitting. The quality of the force field is assessed for a wide range of zeolites with different topologies and chemical compositions, demonstrating good agreement between theoretical predictions and experimental measurements of water adsorption and diffusion.
The approach for the diffusive-controlled electron transfer rates [W. Zhu and Y. Zhao, J. Chem. Phys. 126, 184105 (2007)], which is modeled after the Sumi-Marcus theory, is applied to symmetric electron-transfer reactions in a solvent environment with anharmonic potential functions. The electron-transfer rates are evaluated using the quantum R-matrix theory for dealing with the intramolecular vibrational motions and imaginary-time split operator technique for solving the diffusive equations, thereby taking explicit account of the weak-to-strong electronic couplings. The effect of anharmonicity for both the solvent and intramolecular vibrational degrees of freedom are investigated. It is found that the anharmonicity of the intramolecular modes always enhances the rate while the solvent anharmonicity decreases the rate, compared with the harmonic modes. The possible mechanisms have been clarified.