Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Partial relay selection in mixed RF/FSO dual-hop system over unified M-distributed fading channel with non-zero boresight pointing errors

In this paper, the performance of a partial relay selection-based amplify-and-forward mixed radio frequency/free space optical (RF/FSO) system with a direct RF link and outdated channel state information (CSI) is presented. The source-to-relay and source-to-destination RF links are subjected to Rayleigh distributions while the relay-to-destination FSO link experiences Malaga (M)-distribution with generalized non-zero boresight pointing errors. It is also assumed that selection combining diversity with heterodyne detection is considered for the signal reception at the destination. Moreover, the cumulative distribution functions of the end-to-end signal-to-noise under the influence of with/or without a direct link are then derived for the concerned system. Through this, the closed-form expressions for the system outage probability and average bit error rate are obtained. Thus, the influence of atmospheric turbulence, outdated CSI and relay selection are evaluated for the system under zero boresight and non-zero boresight displacement pointing errors scenarios. The results illustrated that the mixed RF/FSO system with a direct link offers better performance than the one without a direct link. The accuracy of the presented results is validated by Monte-Carlo simulation.

42 ENGINEERING↗

Risk-Informed MultiPphysics BestEestimate Plus Uncertainties (BEPU) Application Development of RELAP5-3D Perturbation Model

The United States nuclear industry is facing a strong challenge to ensure maximum safety while enhancing economic benefit. Safety is a key parameter to all aspects related to light water reactor (LWR) nuclear power plants (NPPs), especially cost savings. Since the goal is to extend the lifetimes of these NPPs, the traditional deterministic safety concept may not guarantee a current economic asset. The Light Water Reactor Sustainability (LWRS) Program has been promoting a wide range of research and development (R&D) in this field to maximize the safety, economics, and performance of these NPPs through improved scientific understanding. One of the best practices to achieve this goal is to identify and optimize safety margins, which can lead to cost reduction. To do this, under the LWRS framework, the Risk-Informed Systems Analysis (RISA) Pathway will focus on the optimization of safety margin and minimization of uncertainties to ensure both safety and economics at the highest level. The RISA Pathway will provide enhanced capabilities for analyzing and characterizing LWR systems performance by developing and demonstrating methods, tools, and data to enable risk-informed margins management (RIMM). The goals of the RISA Pathway are twofold: (1) deploy the risk-informed tools and methods that enable better representation of safety margins and factors that contribute to cost and safety; and (2) conduct advanced risk assessment applications with industry to support margin management strategies that enable more cost-effective plant operation. The tools and methods provided by the RISA Pathway will support effective margin management for both active and passive safety systems, structures, and components (SSC) of an NPP. The tools and methods used in the RISA Pathway should have high confidence and highest technical maturity for and implementation to industry at its current setting. They should also have a capability to support risk-informed decision making for both probabilistic and deterministic elements of safety. The RISA Pathway will, therefore, perform a comprehensive assessment of verification and validation (V&V) status of RISA Toolkit to enhance credibility RISA Toolkit which be used by industry. This report summarizes RELAP5-3D development activities for best estimated and uncertainty (BEPU) capability to support ongoing RISA Pathway pilot projects for risk informed uncertainty quantification applications. Work scope includes (1) development of initial perturbation model for selected closure laws and (2) testing of suitable probability distribution functions (PDF) for the selected correlations. Developed BEPU modules are tested with selected separate effect cases and compared with conventional thermal-hydraulics model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermodynamic Stability of Heterodimetallic [LnLn'] Complexes: Synthesis and DFT Studies

The solid-state and solution configurations of the heterodimetallic complexes (Hpy)[LaEr(HL) 3 (NO 3 )(py)(H 2 O)] (1), (Hpy)[CeEr(HL) 3 (NO 3 )(py)(H 2 O)] (2), (Hpy)[CeGd(HL) 3 (NO 3 )(py)(H 2 O)] (3), (Hpy)[PrSm(HL) 3 (NO 3 )(py)(H 2 O)] (4), and (Hpy) 2 [LaYb(HL) 3 (NO 3 )(H 2 O)](NO 3 ) (5), in which H 3 L is 6-(3-oxo-3-(2-hydroxyphenyl)propionyl)pyridine-2-carboxylic acid and py is pyridine, were analyzed experimentally and by using DFT calculations. Complexes 3, 4, and 5 are described here for the first time, and were analyzed by using single-crystal X-ray diffraction and mass spectrometry. The theoretical study was also extended to the [LaCe] and [LaLu] analogues. The results are consistent with a remarkable selectivity of the metal distribution within the molecule in the solid state, enhanced by the size difference between the different ions. This selectivity was reduced in solution, particularly for ions with the most similar radii. This unique entry into 4f–4f" heterometallic chemistry establishes for the first time the difference between the selectivity in solution and that in the solid state, as a result of changes to the coordination that follow the dissociation of terminal ligands upon dissolution of the complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Next-to-leading order QCD corrections to Higgs production at a future lepton-proton collider

Crucial information on the coupling of the Higgs boson to bottom quarks is expected from Higgs production in association with a forward tagging jet at a future high-energy lepton-proton collider. In order to control the theoretical uncertainties of the signal process, the impact of radiative corrections has to be quantified. We present the full next-to-leading-order QCD corrections to e{sup -}p{yields}e{sup -}jH and e{sup -}p{yields}{nu}{sub e}jH in the form of a flexible Monte-Carlo program allowing for the calculation of cross sections and kinematic distributions within experimentally feasible selection cuts. QCD corrections are found to be very small for cross sections, while the shape distortion of distributions can be as large as 20%. Residual scale uncertainties at next-to-leading order are at the permille level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Defect Generation and Propagation in MC-Si Ingots: Influence on Cell-to-Cell Performance Variation

This paper describes results of our study aimed at understanding mechanism(s) of dislocation generation and propagation in multicrystalline silicon (mc-Si) ingots, and evaluating their influence on the solar cell performance. This work was done in two parts: (i) Measurement of dislocation distributions along various bricks, selected from strategic locations within several ingots; and (ii) Theoretical modeling of the cell performance corresponding to the measured dislocation distributions. Solar cells were fabricated on wafers of known dislocation distribution, and the results were compared with the theory. These results show that cell performance can be accurately predicted from the dislocation distribution, and the changes in the dislocation distribution are the primary cause for variations in the cell-to-cell performance. The dislocation generation and propagation mechanisms, suggested by our results, are described in this paper.

14 SOLAR ENERGY↗

Line-of-sight structure toward strong lensing galaxy clusters

We present an analysis of the line-of-sight structure toward a sample of 10 strong lensing cluster cores. Structure is traced by groups that are identified spectroscopically in the redshift range, 0.1 ≤ z ≤ 0.9, and we measure the projected angular and comoving separations between each group and the primary strong lensing clusters in each corresponding line of sight. From these data we measure the distribution of projected angular separations between the primary strong lensing clusters and uncorrelated large-scale structure as traced by groups. We then compare the observed distribution of angular separations for our strong lensing selected lines of sight against the distribution of groups that is predicted for clusters lying along random lines of sight. There is clear evidence for an excess of structure along the line of sight at small angular separations (θ ≤ 6') along the strong lensing selected lines of sight, indicating that uncorrelated structure is a significant systematic that contributes to producing galaxy clusters with large cross sections for strong lensing. The prevalence of line-of-sight structure is one of several biases in strong lensing clusters that can potentially be folded into cosmological measurements using galaxy cluster samples. These results also have implications for current and future studies—such as the Hubble Space Telescope Frontier Fields—that make use of massive galaxy cluster lenses as precision cosmological telescopes; it is essential that the contribution of line-of-sight structure be carefully accounted for in the strong lens modeling of the cluster lenses.

79 ASTRONOMY AND ASTROPHYSICS↗

Leveraging Free Volume Manipulation to Improve the Membrane Separation Performance of Amine‐Functionalized PIM‐1

Abstract Gas‐separation polymer membranes display a characteristic permeability–selectivity trade‐off that has limited their industrial use. The most comprehensive approach to improving performance is to devise strategies that simultaneously increase fractional free volume, narrow free volume distribution, and enhance sorption selectivity, but generalizable methods for such approaches are exceedingly rare. Here, we present an in situ crosslinking and solid‐state deprotection method to access previously inaccessible sorption and diffusion characteristics in amine‐functionalized polymers of intrinsic microporosity. Free volume element (FVE) size can be increased while preserving a narrow FVE distribution, enabling below‐upper bound polymers to surpass the H 2 /N 2 , H 2 /CH 4 , and O 2 /N 2 upper bounds and improving CO 2 ‐based selectivities by 200 %. This approach can transform polymers into chemical analogues with improved performance, thereby overcoming traditional permeability–selectivity trade‐offs.

Mizrahi Rodriguez, Katherine↗

SHELS: OPTICAL SPECTRAL PROPERTIES OF WISE 22 {mu}m SELECTED GALAXIES

We use a dense, complete redshift survey, the Smithsonian Hectospec Lensing Survey (SHELS), covering a 4 deg{sup 2} region of a deep imaging survey, the Deep Lens Survey (DLS), to study the optical spectral properties of Wide-field Infrared Survey Explorer (WISE) 22 {mu}m selected galaxies. Among 507 WISE 22 {mu}m selected sources with (S/N){sub 22{mu}m} {>=} 3 ( Almost-Equal-To S{sub 22{mu}m} {approx}> 2.5 mJy), we identify the optical counterparts of 481 sources ({approx}98%) at R < 25.2 in the very deep, DLS R-band source catalog. Among them, 337 galaxies at R < 21 have SHELS spectroscopic data. Most of these objects are at z < 0.8. The infrared (IR) luminosities are in the range 4.5 Multiplication-Sign 10{sup 8}(L{sub Sun }) {approx}< L{sub IR} {approx}< 5.4 Multiplication-Sign 10{sup 12}(L{sub Sun }). Most 22 {mu}m selected galaxies are dusty star-forming galaxies with a small (<1.5) 4000 A break. The stacked spectra of the 22 {mu}m selected galaxies binned in IR luminosity show that the strength of the [O III] line relative to H{beta} grows with increasing IR luminosity. The optical spectra of the 22 {mu}m selected galaxies also show that there are some ({approx}2.8%) unusual galaxies with very strong [Ne III] {lambda}3869, 3968 emission lines that require hard ionizing radiation such as active galactic nuclei (AGNs) or extremely young massive stars. The specific star formation rates (sSFRs) derived from the 3.6 and 22 {mu}m flux densities are enhanced if the 22 {mu}m selected galaxies have close late-type neighbors. The sSFR distribution of the 22 {mu}m selected galaxies containing AGNs is similar to the distribution for star-forming galaxies without AGNs. We identify 48 dust-obscured galaxy candidates with large ({approx}> 1000) mid-IR to optical flux density ratio. The combination of deep photometric and spectroscopic data with WISE data suggests that WISE can probe the universe to z {approx} 2.

79 ASTRONOMY AND ASTROPHYSICS↗

Deconvolving distribution of relaxation times, resistances and inductance from electrochemical impedance spectroscopy via statistical model selection: Exploiting structural-sparsity regularization and data-driven parameter tuning

The distribution of relaxation times (DRT) has drawn increasing attention for interpreting electrochemical impedance spectroscopy (EIS). Deconvolution of DRT from EIS is a challenging ill-posed problem that requires regularization methods. In this work, we formulate DRT reconstruction task as a statistical model selection problem with structural-sparsity penalties. We utilize the Elastic net regularization that simultaneously benefits from Ridge and Lasso regularizations with optimal tuning parameter automatically determined by the information criteria. We benchmark our approach on four synthetic experiments (a ZARC element, ZARC mixtures, a RC circuit and a Fractal element) and two real EIS datasets of a Lithium ion battery and an organic-inorganic halide class of perovskites in oxygen environment at different gas pressures. We demonstrate the superiority of proposed model selection procedure, that is capable of eliminating pseudo peaks and representing asymmetries in DRT as well as precisely estimating resistances. Here, we highlight our approach is robust to reducing and subsampling EIS frequency range, making it a promising tool for timing-resolved, localized and large scale EIS data analysis. For the Lithium ion battery data analysis, we extend the classical DRT model to incorporate the inductive effect and illustrate DRT as a guidance for equivalent circuit modeling to refine impedance reconstruction at low risks of overfitting. Furthermore, the structural-sparsity regularization could be extended for multidimensional and Bayesian EIS data analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Concentration Ratios and Transfer Factors for Human and Ecological Probabilistic Performance Assessments - 19781

Human and ecological risk assessments utilize concentration ratios and transfer factors to calculate contaminant concentrations in plant and animal tissues in equilibrium with soil or water (concentration ratios) or based on an animal's contaminant intake from various media (transfer factors). These ratios and factors are used to evaluate human dose via food ingestion pathways and to evaluate ecological dose to an organism. In a probabilistic performance assessment, concentration ratio and transfer factor distributions are developed for every element, and these distributions are applied across the spatial and temporal domain of the assessment. As a result, it is necessary to scale the underlying data distributions by applying the central limit theorem to develop appropriate distributions of the mean for the temporal and spatial scale of the model. Herein we discuss the methodologies for identifying and ranking references, and how to develop statistical distributions of concentration ratios and transfer factors for probabilistic performance assessment models. We also discuss factors that could be pertinent to differences when selecting references and developing distributions for human versus ecological risk assessment scenarios. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Selective Dimerization of Propylene with Ni-MFU-4 l

We report herein the selective dimerization of propylene to branched hexenes using Ni-MFU-4$l$, a solid catalyst prepared by cation exchange. Analysis of the resulting product distribution demonstrates that the selectivity arises from 2,1-insertion and slow product reinsertion, mechanistic features reproduced by a molecular nickel tris-pyrazolylborate catalyst. Characterization of Ni-MFU-4$l$ by X-ray absorption spectroscopy provides evidence for discrete, tris-pyrazolylborate- like coordination of nickel, underscoring the small-molecule analogy that can be made at metal–organic framework nodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stochastic Programming Approach for Resource Selection under Demand Uncertainty

Cost-efficient selection and scheduling of a subset of geographically distributed resources to meet the demands of a scientific workflow is a challenging problem. The problem is exacerbated by uncertainties in demand and availability of resources. In this paper, we present a stochastic optimization based framework for robust decision making in the selection of distributed resources over a planning horizon under demand uncertainty. We present a novel two-stage stochastic programming model for resource selection, and implement an L-shaped decomposition algorithm to solve this model. A Sample Average Approximation algorithm is integrated to enable stochastic optimization to solve problems with a large number of scenarios. Using the metric of stochastic solution, we demonstrate up to 30% cost reduction relative to solutions without explicit consideration of demand uncertainty for a 24-month problem. We also demonstrate up to 54% cost reduction relative to a previously developed solution for a 36-month problem. We further argue that the composition of resources selected is superior to solutions computed without explicit consideration of uncertainties. Given the importance of resource selection and scheduling of complex scientific workflows, especially in the context of commercial cloud computing, we believe that our novel stochastic programming framework will benefit many researchers as well as users of distributed computing resources.

scientific workflows, task scheduling, optimizatio↗

THE REDSHIFT DISTRIBUTION OF GIANT ARCS IN THE SLOAN GIANT ARCS SURVEY

We measure the redshift distribution of a sample of 28 giant arcs discovered as a part of the Sloan Giant Arcs Survey. Gemini/GMOS-North spectroscopy provides precise redshifts for 24 arcs, and 'redshift desert' constrains for the remaining 4 arcs. This is a direct measurement of the redshift distribution of a uniformly selected sample of bright giant arcs, which is an observable that can be used to inform efforts to predict giant arc statistics. Our primary giant arc sample has a median redshift z = 1.821 and nearly two-thirds of the arcs, 64%, are sources at z {approx}> 1.4, indicating that the population of background sources that are strongly lensed into bright giant arcs resides primarily at high redshift. We also analyze the distribution of redshifts for 19 secondary strongly lensed background sources that are not visually apparent in Sloan Digital Sky Survey imaging, but were identified in deeper follow-up imaging of the lensing cluster fields. Our redshift sample for the secondary sources is not spectroscopically complete, but combining it with our primary giant arc sample suggests that a large fraction of all background galaxies that are strongly lensed by foreground clusters reside at z {approx}> 1.4. Kolmogorov-Smirnov tests indicate that our well-selected, spectroscopically complete primary giant arc redshift sample can be reproduced with a model distribution that is constructed from a combination of results from studies of strong-lensing clusters in numerical simulations and observational constraints on the galaxy luminosity function.

79 ASTRONOMY AND ASTROPHYSICS↗

Mixtures of Gaussian wells: Theory, computation, and application

A primary challenge in unsupervised clustering using mixture models is the selection of a family of basis distributions flexible enough to succinctly represent the distributions of the target subpopulations. We introduce a new family of Gaussian well distributions (GWDs) for clustering applications where the target subpopulations are characterized by hollow (hyper-)elliptical structures. We develop the primary theory pertaining to the GWD, including mixtures of GWDs, selection of prior distributions, and computationally efficient inference strategies using Markov chain Monte Carlo. We demonstrate the utility of our approach, as compared to standard Gaussian mixture methods on a synthetic dataset, and exemplify its applicability on an example from immunofluorescence imaging, emphasizing the improved interpretability and parsimony of the GWD-based model.

59 BASIC BIOLOGICAL SCIENCES↗

Multicriteria VMAT optimization

Purpose: To make the planning of volumetric modulated arc therapy (VMAT) faster and to explore the tradeoffs between planning objectives and delivery efficiency. Methods: A convex multicriteria dose optimization problem is solved for an angular grid of 180 equi-spaced beams. This allows the planner to navigate the ideal dose distribution Pareto surface and select a plan of desired target coverage versus organ at risk sparing. The selected plan is then made VMAT deliverable by a fluence map merging and sequencing algorithm, which combines neighboring fluence maps based on a similarity score and then delivers the merged maps together, simplifying delivery. Successive merges are made as long as the dose distribution quality is maintained. The complete algorithm is called VMERGE. Results: VMERGE is applied to three cases: a prostate, a pancreas, and a brain. In each case, the selected Pareto-optimal plan is matched almost exactly with the VMAT merging routine, resulting in a high quality plan delivered with a single arc in less than 5 min on average. Conclusions: VMERGE offers significant improvements over existing VMAT algorithms. The first is the multicriteria planning aspect, which greatly speeds up planning time and allows the user to select the plan, which represents the most desirable compromise between target coverage and organ at risk sparing. The second is the user-chosen epsilon-optimality guarantee of the final VMAT plan. Finally, the user can explore the tradeoff between delivery time and plan quality, which is a fundamental aspect of VMAT that cannot be easily investigated with current commercial planning systems.

61 RADIATION PROTECTION AND DOSIMETRY↗

Cross-correlation redshift calibration without spectroscopic calibration samples in DES Science Verification Data

Galaxy cross-correlations with high-fidelity redshift samples hold the potential to precisely calibrate systematic photometric redshift uncertainties arising from the unavailability of complete and representative training and validation samples of galaxies. However, application of this technique in the Dark Energy Survey (DES) is hampered by the relatively low number density, small area, and modest redshift overlap between photometric and spectroscopic samples. We propose instead using photometric catalogs with reliable photometric redshifts for photo-z calibration via cross-correlations. We verify the viability of our proposal using redMaPPer clusters from the Sloan Digital Sky Survey (SDSS) to successfully recover the redshift distribution of SDSS spectroscopic galaxies. We demonstrate how to combine photo-z with cross-correlation data to calibrate photometric redshift biases while marginalizing over possible clustering bias evolution in either the calibration or unknown photometric samples. We apply our method to DES Science Verification (DES SV) data in order to constrain the photometric redshift distribution of a galaxy sample selected for weak lensing studies, constraining the mean of the tomographic redshift distributions to a statistical uncertainty of $\Delta z \sim \pm 0.01$. We forecast that our proposal can in principle control photometric redshift uncertainties in DES weak lensing experiments at a level near the intrinsic statistical noise of the experiment over the range of redshifts where redMaPPer clusters are available. Here, our results provide strong motivation to launch a program to fully characterize the systematic errors from bias evolution and photo-z shapes in our calibration procedure.

79 ASTRONOMY AND ASTROPHYSICS↗