Search NASA⌕ Search

SEARCH · Search NASA

Results for “exploratory modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Experimental investigation of a new device to control the asymmetric flowfield on forebodies at large angles of attack

An exploratory experimental investigation of a new device to control the asymmetric flowfield on forebodies at large angles of attack has been conducted. The device is a rotatable forebody tip, which varies in cross section from circular at its base to elliptic at its tip. The device itself extends over a small portion of the aircraft or missile forebody. The device provides two important improvements. First, it replaced the normally random behavior of the nose side force as a function of nose tip orientation with a predictable and generally sinusoidal distribution and, second, the device showed promise for use as part of a vehicle control system, to be deflected in a prescribed manner to provide additional directional control for the vehicle. The device was tested on a cone/cylinder model having a 10 deg semiapex angle and on a 3.0 caliber tangent ogive model, each with a base diameter of 3.5 in, for angles of attack from 30 to 60 deg. Data were taken from 3 circumferential rows of pressure taps on each model at a Reynolds number of 84,000 based on cylinder diameter and by a helium-bubble flow visualization technique at a Reynolds number of 24,000.

Moskovitz, Cary A.↗
NASA NTRS1994

Fusion interfaces for tactical environments: An application of virtual reality technology

The term Fusion Interface is defined as a class of interface which integrally incorporates both virtual and nonvirtual concepts and devices across the visual, auditory, and haptic sensory modalities. A fusion interface is a multisensory virtually-augmented synthetic environment. A new facility has been developed within the Human Engineering Division of the Armstrong Laboratory dedicated to exploratory development of fusion interface concepts. This new facility, the Fusion Interfaces for Tactical Environments (FITE) Facility is a specialized flight simulator enabling efficient concept development through rapid prototyping and direct experience of new fusion concepts. The FITE Facility also supports evaluation of fusion concepts by operation fighter pilots in an air combat environment. The facility is utilized by a multidisciplinary design team composed of human factors engineers, electronics engineers, computer scientists, experimental psychologists, and oeprational pilots. The FITE computational architecture is composed of twenty-five 80486-based microcomputers operating in real-time. The microcomputers generate out-the-window visuals, in-cockpit and head-mounted visuals, localized auditory presentations, haptic displays on the stick and rudder pedals, as well as executing weapons models, aerodynamic models, and threat models.

Haas, Michael W.↗
NASA NTRS1987

On the nonlinear aerodynamic and stability characteristics of a generic chine-forebody slender-wing fighter configuration

An exploratory investigation was conducted of the nonlinear aerodynamic and stability characteristics of a tailless generic fighter configuration featuring a chine-shaped forebody coupled to a slender cropped delta wing in the NASA Langley Research Center's 12-Foot Low-Speed Wind Tunnel. Forebody and wing vortex flow mechanisms were identified through off-body flow visualizations to explain the trends in the longitudinal and lateral-directional characteristics at extreme attitudes (angles of attack and sideslip). The interactions of the vortical motions with centerline and wing-mounted vertical tail surfaces were studied and the flow phenomena were correlated with the configuration forces and moments. Single degree of freedom, free-to-roll tests were used to study the wing rock susceptibility of the generic fighter model. Modifications to the nose region of the chine forebody were examined and fluid mechanisms were established to account for their ineffectiveness in modulating the highly interactive forebody and wing vortex systems.

Erickson, Gary E.↗
NASA NTRS1987

On the nonlinear aerodynamic and stability characteristics of a generic chine-forebody slender-wing fighter configuration

An exploratory investigation was conducted of the nonlinear aerodynamic and stability characteristics of a tailless generic fighter configuration featuring a chine-shaped forebody coupled to a slender cropped delta wing in the NASA Langley Research Center's 12-Foot Low-Speed Wind Tunnel. Forebody and wing vortex flow mechanisms were identified through off-body flow visualizations to explain the trends in the longitudinal and lateral-directional characteristics at extreme attitudes (angles of attack and sideslip). The interactins of the vortical motions with centerline and wing-mounted vertical tail surfaces were studied and the flow phenomena were correlated with the configuration forces and moments. Single degree-of-freedom, free-to-roll tests were used to study the wing rock susceptibility of the generic fighter model. Modifications to the nose region of the chine forebody were examined and fluid mechanisms were established to account for their ineffectiveness in modulating the highly interactive forebody and wing vortex systems.

Erickson, Gary E.↗
NASA NTRSDate not supplied

Activities of the NASA Urban Air Mobility Noise Working Group (UNWG)

The NASA-led Urban Air Mobility Noise Working Group was established in 2018 following an exploratory meeting of stakeholders from traditional and emerging aviation sectors across industry, government agencies, academia, and community groups. Its mission is to create and support a diverse community of acoustics experts to identify, discuss, and address noise issues associated with UAM vehicles and their operations. The UNWG is comprised of four subgroups including Tools and Technologies, Ground and Flight Testing, Human Response and Metrics, and Regulation and Policy. In 2020, NASA published the white paper entitled “Urban Air Mobility Noise: Current Practice, Gaps, and Recommendations,” that presents a set of high-level goals and makes recommendations to address gaps in the current practice. This presentation is about recent activities of each of the subgroups to address those recommendations, including work towards establishment of an aeroacoustic test database for model validation, development of a set of measurement guidelines to quantify vehicle acoustic emission, a remotely administered human response study for quantifying annoyance to UAM operations, and status on noise standard, regulation, policy, and community engagement developments.

Urban air mobility↗
DOE OSTI2022

A Novel Process for Converting Coal to High-Value Polyurethane Products

Battelle has demonstrated a patented process for making high-value, polyurethane (PU) foam from coal, based on preparing liquefied coal via direct liquefaction, converting it to polyols as an intermediate via ozonation, and then making PU foams from these polyols. This process represents a breakthrough in innovative utilization of U.S. coals, and is applicable to bituminous as well as sub-bituminous coals. The resulting PU foam products are projected to have an extremely high value (i.e., over $\$5,000$ /ton), with nearly 100% of carbon utilization from coalderived liquid feedstock, and 31.5% to 43.5% of the carbon in the PU foam polyol product being bio-based. The targeted products represent an extremely large (i.e., over $80 billion/year), existing PU foam market, which could expand into making coatings and adhesives. The process can further help reduce petroleum imports, while improving the economics of PU foam production. This work was completed with funding from the National Energy Technology Laboratory (NETL), with cost share from the State of Ohio’s Ohio Development Services Agency (ODSA) and others, and has advanced the process to 10 kg/day continuous scale and thus to Technology Readiness Level (TRL) 5. A total of 48 coal-based polyols were prepared and evaluated. The initial 28 polyols focused on range finding for ideal conditions. The later 20 polyols were produced as part of process optimizations. These optimizations were targeted around a continuous ozonolysis process to evaluate extended time reactions and to create the necessary intermediate for production of 1-gallon samples of polyol. The most unique attribute of Battelle’s polyol is in the utilization of coal’s aromaticity to gain final foam rigidity. Typically, polyols depend on the isocyanate fraction and cross-linking to gain rigidity. By utilizing coal, we were able to maintain rigidity while reducing the overall hydroxyl value of the polyol. This is important as lower hydroxyl value leads to greater percent weight of the coal-based polyol because less isocyanate is required for foaming. This leads to greater foam cost savings. This report provides the details, process, and process cost models of the conversion of coal to polyols and further to PU foams. Battelle’s process begins with coal liquids. These liquids can be obtained by two processes: coal coking or pyrolysis to produce coal tar, and Battelle’s biobased coal-to-liquids (CTL) process to produce heavy syncrude after liquifying >85% coal. After liquification, Battelle utilizes ozonolysis to create functionalization on the polyaromatic coal structure. The functionalization is then converted to the final polyester polyol through transesterification, or to hydroxyamide polyol through amidification. Equivalent or better standard properties have been obtained for 2 lb/ft 3 density rigid, water and freon-alternative blown foams, including compressive strength, density, R-value, and dimensional stability. Target applications for these foams are insulation, packaging, and energy-absorbing foams. Some exploratory testing also showed promise for adhesives applications. A detailed economic analysis showed that Battelle’s polyol process is economical, at a 140 metric tons per day (MTD) polyol production scale. An attractive return on investment (ROI) at competitive pricing validates the process is ready for a pilot-plant demonstration. A scale-up plan is provided.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1995

Development of methods for predicting large crack growth in elastic-plastic work-hardening materials in fully plastic conditions

The objects of the first, exploratory, stage of the project were listed as: (1) to make a detailed and critical review of the Boundary Element method as already published and with regard to elastic-plastic fracture mechanics, to assess its potential for handling present concepts in two-dimensional and three-dimensional cases. To this was subsequently added the Finite Volume method and certain aspects of the Finite Element method for comparative purposes; (2) to assess the further steps needed to apply the methods so far developed to the general field, covering a practical range of geometries, work hardening materials, and composites: to consider their application under higher temperature conditions; (3) to re-assess the present stage of development of the energy dissipation rate, crack tip opening angle and J-integral models in relation to the possibilities of producing a unified technology with the previous two items; and (4) to report on the feasibility and promise of this combined approach and, if appropriate, make recommendations for the second stage aimed at developing a generalized crack growth technology for its application to real-life problems.

Ford, Hugh↗
DOE OSTI2020

Distributed non-negative matrix factorization with determination of the number of latent features

The holistic analysis and understanding of the latent (that is, not directly observable) variables and patterns buried in large datasets is crucial for data-driven science, decision making and emergency response. Such exploratory analyses require devising unsupervised learning methods for data mining and extraction of the latent features, and non-negative matrix factorization (NMF) is one of the prominent such methods. NMF is based on compute-intense non-convex constrained minimization, which, for large datasets requires fast and distributed algorithms. However, current parallel implementations of NMF fail to estimate the number of latent features. In practice, identifying these features is both difficult and significant for pattern recognition and latent feature analysis, especially for large dense matrices. Here, we introduce a distributed NMF algorithm coupled with distributed custom clustering followed by a stability analysis on dense data, which we call DnMFk, to determine the number of latent variables. The results on synthetic data and the classical Swimmer data set demonstrate the accuracy of model determination while scaling nearly linearly across multiple processors for large data. Further, we employ DnMFk to determine the number of hidden features from a terabyte matrix.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Selective recovery of native copper from basalt tailings using alkaline glycinate solution

Mafic and ultramafic rocks present an intriguing pathway for CO 2 capture through strategic enhancements to the natural silicate weathering cycle. Simultaneously, these rock types are often hosts to appreciable amounts of metals critical to U.S. energy independence, particularly in the context of alkaline mine tailings from historical metal mining. The research and scientific prerogative, then, is to identify promising mafic and ultramafic feedstocks and conduct exploratory studies to effectively recover these critical minerals while preserving the potential for mineral carbonation. The Keweenaw Peninsula of Michigan hosts the largest native Cu reservoir within basalt in the world and experienced a rich history of Cu production spanning from pre-historic times to the mid-1900s. Today, much of the Cu mining legacy remains as mine waste tailings. In this study, we examined the Cu extractability from Keweenaw Basalt tailings using a sodium glycinate solution, in comparison with acid and sodium hydroxide leaching. Experimental results showed an 85 % Cu extraction rate using sodium glycinate as the extraction solution with negligible release of other cations from the basalt. The kinetic and extraction mechanisms of Cu selective recovery using glycinate solution were discussed using time-resolved experimental data and kinetic geochemical modeling. Theoretical estimation of carbon mineralization potential of all the existing basalt waste tailings (∼500 million tons) can reach 85.5 MMT CO 2 . A total of 0.786 MMT Cu can be recovered with sodium glycinate, with a value of 7.7 billion USD. In conclusion, this novel application of alkaline glycinate for selective Cu recovery from basalt mine tailings demonstrates the viability of selective metal recovery using a non-hazardous chemical while preserving CO 2 capture potential and presents a potential pathway toward reducing energy-related emissions and providing an unconventional domestic source of critical minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Score-based deterministic density sampling

We propose a deterministic sampling framework using Score-Based Transport Modeling for sampling an unnormalized target density π given only its score ∇ log π. Our method approximates the Wasserstein gradient flow on KL($f_t$∥π) by learning the time-varying score ∇ log $f_t$ on the fly using score matching. While having the same marginal distribution as Langevin dynamics, our method produces smooth deterministic trajectories, resulting in monotone noise-free convergence. We prove that our method dissipates relative entropy at the same rate as the exact gradient flow, provided sufficient training. Numerical experiments validate our theoretical findings: our method converges at the optimal rate, has smooth trajectories, and is often more sample efficient than its stochastic counterpart. Experiments on high-dimensional image data show that our method produces high-quality generations in as few as 15 steps and exhibits natural exploratory behavior. The memory and runtime scale linearly in the sample size.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Optimizing Alabama’s CO 2 Storage in Shelby County (Project OASIS) Milestone 6.0: Evaluation of Class VI Readiness

Introduction. Project OASIS is approximately 30 miles southeast of Birmingham, Alabama, and approximately 5 miles north-northwest of Alabama Power Company's Plant Gaston. Geologically, the Project area is in the Alabama fold and thrust belt province. This work builds on the initiatives of the Southeast Regional Carbon Utilization and Storage Acceleration Partnership (SECARB-USA, DE-FE0031830) that identified nearly 500 million metric tonnes of CO 2 emitted on an annual basis that is not collocated with prospective storage geology (the Coastal Plain of the Southeastern US in this context). This observation suggests costly investments in connective infrastructure (e.g., pipelines) or exploratory well drilling campaigns to identify CO 2 storage opportunities in under explored areas. While not traditionally thought of for saline storage, these studies suggest that storage prospects in the Valley and Ridge Province occur in relatively flat lying structural panels between thrust faults. For the Project OASIS region, available geologic studies related to hydrocarbon exploration suggest that Cambro-Ordovician carbonates and Cambrian clastic units offer multiple potential storage intervals, and that regional confining systems are present, such as the tectonically thickened Floyd-Parkwood Shale. The Project OASIS surface property is owned by a timber and land stewardship company, The Westervelt Company, Inc., who worked with the Project Team to select and prepare adequate sites for geologic assessment. The purpose of drilling the Westover Stratigraphic Test Well #2 was to collect geologic data to model the feasibility of commercial scale CO 2 injection and storage in an under explored region. This initiative benefits the regions emitters as the data generated from this study can inform their own internal decision making. The field program included geological and geophysical evaluations, reservoir engineering analyses, and risk assessments. This report evaluates existing data, as well as a variety of modeling scenarios to evaluate project readiness. Importantly, the impact of this study is not limited to Alabama as there are numerous large emitters throughout Appalachia, in similar geologic settings, contemplating their decarbonization options.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Reticular Materials and AI-Driven Computer Simulations for Seawater Mining of Valuable Metals (Final Technical Report)

This Final Technical Report describes our exploratory efforts that combine reticular materials synthesis (hydrolytically robust metal–organic frameworks, MOFs) with AI‑enabled molecular simulations to develop mechanistic, quantitative design rules for recovering lithium and other alkali-metal ions from highly dilute, competitive aqueous resources (e.g., seawater). The central outcome is a joint experimental–computational study of ion uptake in MOF‑808 (Chemical Science, 2025) that quantifies both thermodynamics and kinetics of Li + , Na + , and K + uptake and identifies how pore size, pore hydration state, dehydration penalties, and pore-window transport barriers govern selectivity. Guided by these insights, we synthesized and tested functionalized MOF‑808 and multivariate MOFs incorporating ion-recognition motifs (including carboxylates and crown-ether linkers) and evaluated uptake in synthetic seawater, highlighting framework topology and pore chemistry as levers for improved Li + /Na + discrimination. We also developed transferable simulation models, enhanced-sampling protocols, and automated workflows that enable systematic screening of porous sorbents.

42 ENGINEERING↗
DOE OSTI2025

Predicting interface structure using the minima hopping method

Here, we adapt the minima hopping method (MHM) to the problem of interfacial structure prediction and apply it to study a canonical problem, the tilt grain boundaries in SrTiO 3 . Our method employs a hybrid approach by first exploring the potential energy surface (PES) of different grain boundary samplings with an empirical force field, among which the fifteen candidates with lower energies are then refined using ab initio density functional theory (DFT) calculations. During the exploratory stage, we bias the search using a local order parameter to primarily sample various reconstructions in the vicinity of the interface, while preserving the crystallinity of the bulk regions. We further enhance the search by incorporating initial structures with rigid body displacements to account for translational variations between bulk phases, enabling the MHM to effectively generate both stoichiometric and nonstoichiometric SrTiO 3 Σ⁢3(111)[110] and Σ⁢3(112)[110] grain boundaries. From an algorithmic standpoint, MHM outperforms earlier studies based on genetic algorithms (GA) by identifying more stable interfacial structures of several SrTiO 3 grain boundaries. The performance of the present implementation of the MHM approach is primarily limited by exploring an approximate description of the PES with a rather simple Buckingham potential. This limitation leads to variations in performance when compared to approaches utilizing more advanced surrogate PES models, such as direct DFT-PES sampling or GA with the embedded atom method (EAM). Despite the present limitations, the MHM approach is able to yield interfacial structures with comparable or lower interfacial energies in specific cases, such as Σ⁢3(111)[110] Γ=1, ±0.5 and Σ⁢3(112)[110] Γ= ±1, −2, underscoring the robustness of the MHM approach even with a simple approximation of the DFT PES. The MHM interfacial structure prediction method thus offers an efficient approach to understanding the grain boundaries and heterointerfaces at the atomic scale, providing an important prerequisite for effective materials design.

density functional theory↗
DOE OSTI2024

Exploratory Studies of Mechanical Properties, Residual Stress, and Grain Evolution at the Local Regions near Pores in Additively Manufactured Metals

Directed energy deposition (DED) is gaining widespread acceptance in various industrial applications since its unique manufacturing features allow the DED to print metallic parts with very complex geometries. However, DED inevitably generates a lot of internal pores which can limit the widespread applications of the DED technique. The current studies on DED porosity are mostly focused on analyzing pores’ bulk-scale influences on mechanical properties and performances. Since DED pores have a micro-scale existence, with dimensions ranging from a few microns to several hundred microns, it is fundamental to explore the pores’ influences on the micro-scale, including local mechanical properties, residual stress, and grains near pores. However, this important research direction has been neglected. The objective of this work is to fill the above gap in DED porosity research and acquire a fundamental understanding of the role of porosity on a microscopic scale. The authors used nanoindentation approaches to investigate internal pores’ effects on mechanical properties and residual stress in local regions surrounding the pores. In addition, the grains near pores were observed through EBSD, and simulated with the Kinetic Monte Carlo model. The research findings can be provided for DED researchers and industrial practitioners as technical guidance. Most importantly, the research results can work as a good reference for tracing the source of bulk-scale mechanical performances and properties of DED parts with internal pores.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Electron spin resonance study of thermal instability reactions in jet fuels

Free radicals were studied by electron spin resonance (ESR) using model compounds that are representative of constituents of jet fuels. Radical formation was initiated with peroxides and hydroperoxides by using UV photolysis at and near room temperature and thermal initiation at higher temperatures. Both oxygen free and air saturated systems were studied. N-Dodecane was frequently used as a solvent, and a mixture of n-dodecyl radicals was made with a peroxide initiator in n-dodecane (free of oxygen) thermally at 212 C and photolytically at room temperature. Hydrogen abstraction from the 3,4,5 and 6-positions gives radicals that are sufficiently alike that their spectra are essentially superimposed. The radical formed by abstract of hydrogen from the 2-position gives a different spectrum. ESR parameters for these radicals were measured. The radical formed by abstraction of a primary hydrogen was not observed. Similar radicals are formed from n-decane. A variety of exploratory experiments were carried out with systems that give free radical spectra to which was added small amounts of 2,5-dimethylpyrrole.

Zeldes, H.↗
NASA NTRS1982

Rainfall results of the Florida Area Cumulus Experiment, 1970-76

The Florida Area Cumulus Experiment of 1970-76 (FACE-1) is a single-area, randomized, exploratory experiment to determine whether seeding cumuli for dynamic effects (dynamic seeding) can be used to augment convective rainfall over a substantial target area in south Florida. Rainfall is estimated using S-band radar observations after adjustment by raingages. The two primary response variables are rain volumes in the total target (TT) and in the floating target (FT), the most intensely treated portion of the target. The experimental unit is the day and the main observational period is the 6 h after initiation of treatment. Analyses without predictors suggest apparent increases in both the location and the dispersion characteristics of rainfall due to seeding in the FT and TT variables with substantial statistical support for the FT results and lesser statistical support for the TT results. Analyses of covariance using meteorologically meaningful predictor variables suggest a somewhat larger effect of seeding with stronger statistical support. These results are interpreted in terms of the FACE conceptual model.

Woodley, W. L.↗
NASA NTRS2006

Structural Configuration Analysis of Crew Exploration Vehicle Concepts

Structural configuration modeling and finite element analysis of crew exploration vehicle (CEV) concepts are presented. In the structural configuration design approach, parametric solid models of the pressurized shell and tanks are developed. The CEV internal cabin pressure is same as in the International Space Station (ISS) to enable docking with the ISS without an intermediate airlock. Effects of this internal pressure load on the stress distribution, factor of safety, mass and deflections are investigated. Uniform 7 mm thick skin shell, 5 mm thick shell with ribs and frames, and isogrid skin construction options are investigated. From this limited study, the isogrid construction appears to provide most strength/mass ratio. Initial finite element analysis results on the service module tanks are also presented. These rapid finite element analyses, stress and factor of safety distribution results are presented as a part of lessons learned and to build up a structural mass estimation and sizing database for future technology support. This rapid structural analysis process may also facilitate better definition of the vehicles and components for rapid prototyping. However, these structural analysis results are highly conceptual and exploratory in nature and do not reflect current configuration designs being conducted at the program level by NASA and industry.

Mukhopadhyay, V.↗
NASA NTRS2004

NASA Tech Briefs, February 2004

Topics include: Simulation Testing of Embedded Flight Software; Improved Indentation Test for Measuring Nonlinear Elasticity; Ultraviolet-Absorption Spectroscopic Biofilm Monitor; Electronic Tongue for Quantitation of Contaminants in Water; Radar for Measuring Soil Moisture Under Vegetation; Modular Wireless Data-Acquisition and Control System; Microwave System for Detecting Ice on Aircraft; Routing Algorithm Exploits Spatial Relations; Two-Finger EKG Method of Detecting Evasive Responses; Updated System-Availability and Resource-Allocation Program; Routines for Computing Pressure Drops in Venturis; Software for Fault-Tolerant Matrix Multiplication; Reproducible Growth of High-Quality Cubic-SiC Layers; Nonlinear Thermoelastic Model for SMAs and SMA Hybrid Composites; Liquid-Crystal Thermosets, a New Generation of High-Performance Liquid-Crystal Polymers; Formulations for Stronger Solid Oxide Fuel-Cell Electrolytes; Simulation of Hazards and Poses for a Rocker-Bogie Rover; Autonomous Formation Flight; Expandable Purge Chambers Would Protect Cryogenic Fittings; Wavy-Planform Helicopter Blades Make Less Noise; Miniature Robotic Spacecraft for Inspecting Other Spacecraft; Miniature Ring-Shaped Peristaltic Pump; Compact Plasma Accelerator; Improved Electrohydraulic Linear Actuators; A Software Architecture for Semiautonomous Robot Control; Fabrication of Channels for Nanobiotechnological Devices; Improved Thin, Flexible Heat Pipes; Miniature Radioisotope Thermoelectric Power Cubes; Permanent Sequestration of Emitted Gases in the Form of Clathrate Hydrates; Electrochemical, H2O2-Boosted Catalytic Oxidation System; Electrokinetic In Situ Treatment of Metal-Contaminated Soil; Pumping Liquid Oxygen by Use of Pulsed Magnetic Fields; Magnetocaloric Pumping of Liquid Oxygen; Tailoring Ion-Thruster Grid Apertures for Greater Efficiency; and Lidar for Guidance of a Spacecraft or Exploratory Robot.

Source record↗