SEARCH · Search NASA

Results for “frequency variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Fast autotuning of a hydrogen maser by cavity Q modulation

A new fast autotuner for the hydrogen maser was implemented. By modulating the cavity, a phase shift in the maser output signal is induced which is proportional to the cavity tuning error. The phase shift is detected and fed back to a varactor tuner to stabilize the cavity against long-term drifts. Also, a PIN-diode cavity modulator which gives no incidental frequency shift over a very wide range of operation was developed. Modulated at over 200 Hz, it allows variations in maser cavity frequency to be compensated with a loop gain greater than 1000. Compensation of incidental amplitude modulation of the output was demonstrated.

Dick, G. J.↗

NASA NTRS1972

The SAS-D nutation control system

A control law is developed for the SAS-D nutation control system. Nutation is removed in a sub-optimal manner with respect to fuel consumed, but attitude errors are minimized. The research performed consist of an investigation of nutation theory and nutation due to energy dissipation, nutation detection analysis, nutation control analysis, and error analysis. The resulting nutation control system uses an accelerometer or rate gyro to sense the nutation angle theta which varies sinusoidally at the nutation frequency omega. The sensed nutation angle is compared with a threshold theta sub tau. If the sensed nutation is greater, a thrust pulse of duration equal to the period of one spin cycle is initiated. Since the threshold theta sub tau is set equal to the amount of nutation that can be removed by one thrust pulse of duration equal to one spin cycle, the spacecraft nutation is reduced to near zero. Error analysis indicates that the nutation sensed, the threshold, the amount of nutation that can be removed during one thrust pulse, and the time duration of one thrust pulse are all sensitive to the spacecraft spin frequency imparted by the Delta rocket. Thus, the nutation control system was designed to be adaptive to the possible variations in imparted spin frequency.

Taylor, J. M.↗

NASA NTRS2009

Circuit for Driving Piezoelectric Transducers

The figure schematically depicts an oscillator circuit for driving a piezoelectric transducer to excite vibrations in a mechanical structure. The circuit was designed and built to satisfy application-specific requirements to drive a selected one of 16 such transducers at a regulated amplitude and frequency chosen to optimize the amount of work performed by the transducer and to compensate for both (1) temporal variations of the resonance frequency and damping time of each transducer and (2) initially unknown differences among the resonance frequencies and damping times of different transducers. In other words, the circuit is designed to adjust itself to optimize the performance of whichever transducer is selected at any given time. The basic design concept may be adaptable to other applications that involve the use of piezoelectric transducers in ultrasonic cleaners and other apparatuses in which high-frequency mechanical drives are utilized. This circuit includes three resistor-capacitor networks that, together with the selected piezoelectric transducer, constitute a band-pass filter having a peak response at a frequency of about 2 kHz, which is approximately the resonance frequency of the piezoelectric transducers. Gain for generating oscillations is provided by a power hybrid operational amplifier (U1). A junction field-effect transistor (Q1) in combination with a resistor (R4) is used as a voltage-variable resistor to control the magnitude of the oscillation. The voltage-variable resistor is part of a feedback control loop: Part of the output of the oscillator is rectified and filtered for use as a slow negative feedback to the gate of Q1 to keep the output amplitude constant. The response of this control loop is much slower than 2 kHz and, therefore, does not introduce significant distortion of the oscillator output, which is a fairly clean sine wave. The positive AC feedback needed to sustain oscillations is derived from sampling the current through the piezoelectric transducer. This positive AC feedback, in combination with the slow feedback to the voltage-variable resistors, causes the overall loop gain to be just large enough to keep the oscillator running. The positive feedback loop includes two 16-channel multiplexers, which are not shown in the figure. One multiplexer is used to select the desired piezoelectric transducer. The other multiplexer, which is provided for use in the event that there are significant differences among the damping times of the 16 piezoelectric transducers, facilitates changing the value of one of the resistors in the positive-feedback loop to accommodate the damping time of the selected transducer.

Randall, David P.↗

NASA NTRS1998

Lunar and Solar Torques on the Oceanic Tides

A general framework for calculating lunar and solar torques on the oceanic tides is developed in terms of harmonic constituents. Axial torques and their associated angular momentum and earth-rotation variations are deduced from recent satellite-altimeter and satellite-tracking tide solutions. Torques on the prograde components of the tide produce the familiar secular braking of the rotation rate. The estimated secular acceleration is approximately -1300 sec/century(sup 2) (less 4% after including atmospheric tides); the implied rate of change in the length of day is 2.28 milliseconds/century. Torques on the retrograde components of the tide produce periodic rotation variations at twice the tidal frequency. Interaction torques, e.g. solar torques on lunar tides, generate a large suite of rotation-rate variations at sums and differences of the original tidal frequencies. These are estimated for periods from 18.6 years to quarter-diurnal. At subdaily periods the angular momentum variations are 5 to 6 orders of magnitude smaller than the variations caused by ocean tidal currents.

Ray, Richard D.↗

DOE OSTI2022

High-resolution mapping of phase-matching conditions in second-order nonlinear crystals

We demonstrate the spatial mapping of phase-matching conditions in nonlinear crystals using detuned second-harmonic generation. A beam-stabilization system cancels out the angular wobbling of the translation stages that scan the crystal under test in front of the static probe beam at the fundamental frequency. A submillimeter resolution over the full scanned aperture, 50 × 50 mm 2 , is demonstrated. The mapping of several partially deuterated potassium dihydrogen phosphate (DKDP) crystals reveals the spatially nonuniform phase-matching conditions due to internal variations in crystal properties and high-frequency surface variations.

36 MATERIALS SCIENCE↗

NASA NTRS2007

Statistical Aspects of the North Atlantic Basin Tropical Cyclones: Trends, Natural Variability, and Global Warming

Statistical aspects of the North Atlantic basin tropical cyclones for the interval 1945- 2005 are examined, including the variation of the yearly frequency of occurrence for various subgroups of storms (all tropical cyclones, hurricanes, major hurricanes, U.S. landfalling hurricanes, and category 4/5 hurricanes); the yearly variation of the mean latitude and longitude (genesis location) of all tropical cyclones and hurricanes; and the yearly variation of the mean peak wind speeds, lowest pressures, and durations for all tropical cyclones, hurricanes, and major hurricanes. Also examined is the relationship between inferred trends found in the North Atlantic basin tropical cyclonic activity and natural variability and global warming, the latter described using surface air temperatures from the Armagh Observatory Armagh, Northern Ireland. Lastly, a simple statistical technique is employed to ascertain the expected level of North Atlantic basin tropical cyclonic activity for the upcoming 2007 season.

Wilson, Robert M.↗

NASA NTRS1984

Energization of ions in the auroral plasma by broadband waves - Generation of ion conics

Nonresonant heating of plasma ions flowing along geomagnetic field lines by VLF waves is shown to generate ion conics. Ions with energies of less than 1 eV are proven capable of resonance with ionospheric VLF waves excited by electron beams with energies over 100 eV at lower hybrid frequencies (LHF) of 1-1.01. The variation of resonant ion energy with LHF wave frequency is formulated and an expression is derived for the heating rate. The heating rate is then applied to model ion acceleration along a dipole geomagnetic field in terms of the power spectral density of broadband waves, i.e., the VLF noise. Attention is given to ion energization at lower altitudes than the auroral acceleration region and examples of conic acceleration are cited.

Singh, N.↗

NASA NTRS1998

Control System and Flexible Satellite Interaction During Orbit Transfer Maneuver

In this paper the interaction between the attitude control system and the flexible structure of an artificial satellite during orbit transfer maneuver has been investigated. The satellite was modeled by a rigid central body with one or more flexible appendages. The dynamics equations were obtained by Lagrangean approach. The flexible appendages were treated as clamped-free beam and its displacement was discretized by assumed- mode method. In order to transfer the satellite, a typical Hohmann transfer and a burn-coast-burn strategy were used and the attitude was controlled by an on-off controller. During transfer procedure a global analysis of satellite has been done, such as: performance of control system, influence of elastic response in control system, thruster firing frequency, fuel consumption and variation of orbital elements. In order to avoid the interaction with structure motion, a control system with bandwidth of one decade bellow the fundamental frequency was used. In the simulations the firing frequency was evaluated in an approximately way but kept below the fundamental frequency of the structure. The control system has kept the attitude below the specifications. As a result, the orbit transfer maneuvering has been done correctly without excessive excitation of flexible appendage.

Adenilson Roberto da Silva↗

NASA NTRS2012

Measuring the Redshift Dependence of The Cosmic Microwave Background Monopole Temperature With Planck Data

We study the capability of Planck data to constrain deviations of the cosmic microwave background (CMB) blackbody temperature from adiabatic evolution using the thermal Sunyaev-Zeldovich anisotropy induced by clusters of galaxies. We consider two types of data sets depending on how the cosmological signal is removed: using a CMB template or using the 217 GHz map. We apply two different statistical estimators, based on the ratio of temperature anisotropies at two different frequencies and on a fit to the spectral variation of the cluster signal with frequency. The ratio method is biased if CMB residuals with amplitude approximately 1 microK or larger are present in the data, while residuals are not so critical for the fit method. To test for systematics, we construct a template from clusters drawn from a hydro-simulation included in the pre-launch Planck Sky Model. We demonstrate that, using a proprietary catalog of X-ray-selected clusters with measured redshifts, electron densities, and X-ray temperatures, we can constrain deviations of adiabatic evolution, measured by the parameter α in the redshift scaling T (z) = T0(1 + z)(sup 1−alpha), with an accuracy of sigma(sub alpha) = 0.011 in the most optimal case and with sigma alpha = 0.018 for a less optimal case. These results represent a factor of 2-3 improvement over similar measurements carried out using quasar spectral lines and a factor 6-20 with respect to earlier results using smaller cluster samples.

cosmic background radiation↗

NASA NTRS1984

Explanation of the Normal Winter Anomaly from the Seasonal Variation of Short Wave Absorption

The frequency dependence of the winter anomaly (WA) of radio wave absorption indicates the altitude range where the considered seasonal variation of absorption, L, takes place: 75-95 km. In this height region considerable seasonal variations of ionic composition and effective recombination coefficient, alpha sub e, exist, which can cause seasonal variations of electron concentration, N, and absorption, L. An attempt to render a qualitative estimation of the normal WA, i.e., the increased ratio of winter over summer absorption, L sub w/L sub s, at medium latitudes 40 deg and 50 deg, for solar zenith angles CHi = 60 deg and 75 deg is made. This is compared with existing experimental data.

Velinov, P. J.↗

NASA NTRS2004

Vibration Characteristics Determined for Stainless Steel Sandwich Panels With a Metal Foam Core for Lightweight Fan Blade Design

The goal of this project at the NASA Glenn Research Center is to provide fan materials that are safer, weigh less, and cost less than the currently used titanium alloy or polymer matrix composite fans. The proposed material system is a sandwich fan construction made up of thin solid face sheets and a lightweight metal foam core. The stiffness of the sandwich structure is increased by separating the two face sheets by the foam layer. The resulting structure has a high stiffness and lighter weight in comparison to the solid facesheet material alone. The face sheets carry the applied in-plane and bending loads (ref. 1). The metal foam core must resist the transverse shear and transverse normal loads, as well as keep the facings supported and working as a single unit. Metal foams have ranges of mechanical properties, such as light weight, impact resistance, and vibration suppression (ref. 2), which makes them more suitable for use in lightweight fan structures. Metal foams have been available for decades (refs. 3 and 4), but the difficulties in the original processes and high costs have prevented their widespread use. However, advances in production techniques and cost reduction have created a new interest in this class of materials (ref. 5). The material chosen for the face sheet and the metal foam for this study was the aerospace-grade stainless steel 17-4PH. This steel was chosen because of its attractive mechanical properties and the ease with which it can be made through the powder metallurgy process (ref. 6). The advantages of a metal foam core, in comparison to a typical honeycomb core, are material isotropy and the ease of forming complex geometries, such as fan blades. A section of a 17-4PH sandwich structure is shown in the following photograph. Part of process of designing any blade is to determine the natural frequencies of the particular blade shape. A designer needs to predict the resonance frequencies of a new blade design to properly identify a useful operating range. Operating a blade at or near the resonance frequencies leads to high-cycle fatigue, which ultimately limits the blade's durability and life. So the aim of this study is to determine the variation of the resonance frequencies for an idealized sandwich blade as a function of its face-sheet thickness, core thickness, and foam density. The finite element method is used to determine the natural frequencies for an idealized rectangular sandwich blade. The proven Lanczos method (ref. 7) is used in the study to extract the natural frequency.

Ghosn, Louis J.↗

NASA NTRS1984

The role of the reflection coefficient in precision measurement of ultrasonic attenuation

Ultrasonic attenuation measurements using contact, pulse-echo techniques are sensitive to surface roughness and couplant thickness variations. This can reduce considerable inaccuracies in the measurement of the attenuation coefficient for broadband pulses. Inaccuracies arise from variations in the reflection coefficient at the buffer-couplant-sample interface. The reflection coefficient is examined as a function of the surface roughness and corresponding couplant thickness variations. Interrelations with ultrasonic frequency are illustrated. Reliable attenuation measurements are obtained only when the frequency dependence of the reflection coefficient is incorporated in signal analysis. Data are given for nickel 200 samples and a silicon nitride ceramic bar having surface roughness variations in the 0.3 to 3.0 microns range for signal bandwidths in the 50 to 100 MHz range.

Generazio, E. R.↗

NASA NTRS1985

The role of the reflection coefficient in precision measurement of ultrasonic attenuation

Generazio, E. R.↗

NASA NTRS1977

The effect of pulse interval statistics on the spectrum of radiation from lightning

An analysis of atmospheric radio noise originally appearing in the literature to describe the VLF structure of atmospherics is repeated here, keeping a term discarded in the previous work and extending the results to include all frequencies and some simple effects of amplitude variations. It is shown that at high frequencies, atmospheric radiation appears to be the result of incoherent sources, whereas at low frequencies the sferics appear to originate from coherent sources. These conclusions are valid with only weak restrictions, regardless of the actual statistical model assumed for the process. An implication of these results is that at high frequencies the magnitude of the spectrum of the received signal can be related to the spectrum of the source current, a means for the study of lightning current wave forms thus possibly being provided.

D M Le Vine↗

DOE OSTI2022

The Influence of Temperature Inversion on the Vertical Distribution of Aerosols

Temperature inversion plays an important role in the accumulation and diffusion of aerosols. In this study, the relationship between temperature inversion and the vertical distribution of aerosols is investigated based on Raman lidar observations taken from January 2010 to September 2015 at the Atmospheric Radiation Measurement site in the Southern Great Plains, USA. First, the diurnal and seasonal variations of the surface-based inversion (SBI) and elevated temperature inversion (EI) are investigated. The results indicate that the occurrence frequency of SBI and EI have different seasonal trends. SBI has the highest frequency in summer, while EI has the highest frequency in winter. The diurnal variation of SBI is obvious, with a higher frequency in nighttime and a lower frequency in daytime. The inversion intensity (ΔT) and inversion depth (ΔZ) of SBI and EI have consistent diurnal and seasonal trends. The effects of SBI and EI on the vertical distribution of aerosols are then analyzed. The mean aerosol optical depth (AOD) below the SBI height shows a clear seasonal variation, which is consistent with the seasonal trends of ΔT and ΔZ. This phenomenon also occurs on the AOD below EI top height. The sensitivity analysis shows that the mean AOD below SBI height or EI top height increases with an increase of the ΔT and ΔZ of SBI (EI). It indicates that ΔT and ΔZ are the key factors affecting the vertical distribution of aerosols. In addition, the variation of AOD below and above EI top height is opposite to that of AOD below and above EI bottom height under different ΔT and ΔZ conditions. The correlation coefficients between ΔT (ΔZ) of EI with AOD in EI were 0.62 (0.65). These results indicate that the space between EI bottom height and EI top height can store aerosols. The larger the ΔZ of EI, the more aerosols are stored. These findings contribute to our understanding of the effect of temperature inversion on the vertical distribution of aerosols.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Machine Learning of Key Variables Impacting Extreme Precipitation in Various Regions of the Contiguous United States

Abstract Amplification in extreme precipitation intensity and frequency can cause severe flooding and impose significant social and economic consequences. Variations in extreme precipitation intensity, frequencies, and return periods can be attributed to many physical variables across spatial and temporal scales. Here we employ ensemble machine learning (ML) methods, namely random forest (RF), eXtreme Gradient Boosting (XGB), and artificial neural networks (ANN), to explore key contributing variables to monthly extreme precipitation intensity and frequency in six regions over the United States. We further establish emulators for return periods. Results show that the ML models for intensity perform better in regions with obvious seasonality (i.e., Northern Great Plains, Southern Great Plains, and West Coast) than the other three regions (Northeast, Southwest, and Rocky Mountains), while for frequency the models perform well for most regions. The Shapley additive explanation is used to help explain the relationships between extreme precipitation characteristics and identify top variables for RF and XGB. We find that latent heat flux, relative humidity, soil moisture, and large‐scale subsidence are key common variables across the regions for both monthly intensity and frequency, and their compound effects are non‐negligible. The developed ML models capture the probability and return period of extreme precipitation well for all regions and may be used for decision making (e.g., infrastructure planning and design).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Technical note: Using long short-term memory models to fill data gaps in hydrological monitoring networks

Abstract. Quantifying the spatiotemporal dynamics in subsurface hydrological flows over a long time window usually employs a network of monitoring wells. However, such observations are often spatially sparse with potential temporal gaps due to poor quality or instrument failure. In this study, we explore the ability of recurrent neural networks to fill gaps in a spatially distributed time-series dataset. We use a well network that monitors the dynamic and heterogeneous hydrologic exchanges between the Columbia River and its adjacent groundwater aquifer at the U.S. Department of Energy's Hanford site. This 10-year-long dataset contains hourly temperature, specific conductance, and groundwater table elevation measurements from 42 wells with gaps of various lengths. We employ a long short-term memory (LSTM) model to capture the temporal variations in the observed system behaviors needed for gap filling. The performance of the LSTM-based gap-filling method was evaluated against a traditional autoregressive integrated moving average (ARIMA) method in terms of error statistics and accuracy in capturing the temporal patterns of river corridor wells with various dynamics signatures. Our study demonstrates that the ARIMA models yield better average error statistics, although they tend to have larger errors during time windows with abrupt changes or high-frequency (daily and subdaily) variations. The LSTM-based models excel in capturing both high-frequency and low-frequency (monthly and seasonal) dynamics. However, the inclusion of high-frequency fluctuations may also lead to overly dynamic predictions in time windows that lack such fluctuations. The LSTM can take advantage of the spatial information from neighboring wells to improve the gap-filling accuracy, especially for long gaps in system states that vary at subdaily scales. While LSTM models require substantial training data and have limited extrapolation power beyond the conditions represented in the training data, they afford great flexibility to account for the spatial correlations, temporal correlations, and nonlinearity in data without a priori assumptions. Thus, LSTMs provide effective alternatives to fill in data gaps in spatially distributed time-series observations characterized by multiple dominant frequencies of variability, which are essential for advancing our understanding of dynamic complex systems.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1954

Study of Some Dielectric Properties of Suspensions of Magnesium Particles in Mineral Oil

The variation of dielectric constant has been measured as a function of the concentration of magnesium particles; the shape, size, and degree of oxidation of the particles; the temperature; and the frequency of oscillation. The variation of dielectric constant and settling rate was investigated as a function of time. Also investigated were the effects of particle concentration, shape and time on dielectric losses.

Altshuller, Aubrey P↗