Search NASA⌕ Search

SEARCH · Search NASA

Results for “height estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Determination of Cloud Base Height, Wind Velocity, and Short-Range Cloud Structure Using Multiple Sky Imagers Field Campaign Report

Clouds are a central focus of the U.S. Department of Energy (DOE)’s Atmospheric System Research (ASR) program and Atmospheric Radiation Measurement (ARM) Climate Research Facility, and more broadly are the subject of much investigation because of their important effects on atmospheric radiation and, through feedbacks, on climate sensitivity. Significant progress has been made by moving from a vertically pointing (“soda-straw”) to a three-dimensional (3D) view of clouds by investing in scanning cloud radars through the American Recovery and Reinvestment Act of 2009. Yet, because of the physical nature of radars, there are key gaps in ARM's cloud observational capabilities. For example, cloud radars often fail to detect small shallow cumulus and thin cirrus clouds that are nonetheless radiatively important. Furthermore, it takes five to twenty minutes for a cloud radar to complete a 3D volume scan and clouds can evolve substantially during this period. Ground-based stereo-imaging is a promising technique to complement existing ARM cloud observation capabilities. It enables the estimation of cloud coverage, height, horizontal motion, morphology, and spatial arrangement over an extended area of up to 30 by 30 km at refresh rates greater than 1 Hz (Peng et al. 2015). With fine spatial and temporal resolution of modern sky cameras, the stereo-imaging technique allows for the tracking of a small cumulus cloud or a thin cirrus cloud that cannot be detected by a cloud radar. With support from the DOE SunShot Initiative, the Principal Investigator (PI)’s team at Brookhaven National Laboratory (BNL) has developed some initial capability for cloud tracking using multiple distinctly located hemispheric cameras (Peng et al. 2015). To validate the ground-based cloud stereo-imaging technique, the cloud stereo-imaging field campaign was conducted at the ARM Facility’s Southern Great Plains (SGP) site in Oklahoma from July 15 to December 24. As shown in Figure 1, the cloud stereo-imaging system consisted of two inexpensive high-definition (HD) hemispheric cameras (each cost less than $1,500) and ARM’s Total Sky Imager (TSI). Together with other co-located ARM instrumentation, the campaign provides a promising opportunity to validate stereo-imaging-based cloud base height and, more importantly, to examine the feasibility of cloud thickness retrieval for low-view-angle clouds.

54 ENVIRONMENTAL SCIENCES↗

An improved cloud retrieval algorithim using HIRS2-MSU radiance measurements

Cloud-top heights and cloud amounts are produced as part of the operational processing of polar-satellite data at the National Environmental Satellite Data and Information Service (NESDIS). These products were compared with similar products from the air force's real-time nephanalysis (RTNEPH), from the International Satellite Cloud Climatology Project, and from NASA Goddard's processing of satellite data. It was found that the amount of high-level cloud was too small in the NESDIS results, while the amount of low-level cloud was too large. An examination of the NESDIS algorithm revealed that the differences in cloud distributions were caused by the selection of channels used for the cloud retrievals. Cloud retrievals are most accurate at the levels at which the channels that are used are most sensitive. In addition, it was found that no one pair of channels was best at all levels. A new procedure was developed that varied the channels as a function of an initial estimate of the cloud height. This procedure produced improved cloud retrievals that were then compared with the RTNEPH results. The comparison showed that the two methods provide similar retrievals of cloud height and amount.

Mcmillin, Larry↗

Time Series Vegetation Aerodynamic Roughness Fields Estimated from MODIS Observations

Most land surface models used today require estimates of aerodynamic roughness length in order to characterize momentum transfer between the surface and atmosphere. The most common method of prescribing roughness is through the use of empirical look-up tables based solely on land cover class. Theoretical approaches that employ satellite-based estimates of canopy density present an attractive alternative to current look-up table approaches based on vegetation cover type that do not account for within-class variability and are oftentimes simplistic with respect to temporal variability. The current research applies Raupach s formulation of momentum aerodynamic roughness to MODIS data on a regional scale in order to estimate seasonally variable roughness and zero-plane displacement height fields using bulk land cover parameters estimated by [Jasinski, M.F., Borak, J., Crago, R., 2005. Bulk surface momentum parameters for satellite-derived vegetation fields. Agric. For. Meteorol. 133, 55-68]. Results indicate promising advances over look-up approaches with respect to characterization of vegetation roughness variability in land surface and atmospheric circulation models.

Borak, Jordan S.↗

Improvement of Drop‐Hammer Impact Testing for Safety Assessment of High Explosives Using 10‐mg Samples

Here, in this study, we established an improved method for drop-hammer impact testing of small quantities of high explosives (10 mg). We performed about seven hundred impact tests under various experimental conditions (e.g., sandpaper vs bare anvil, different sample masses, drop-weights, and striker diameters) to determine an optimal set of conditions and reaction detection methods (e.g., gas analysis, video, and sound recordings) that give the most statistically reliable results with 10 mg samples. We used both Frequentist and Bayesian statistical approaches to compare estimates of the drop height (DH50) that initiates a reaction 50% of the time, and to quantify the associated uncertainty. Gas analysis proved to be the most reliable reaction detection method, showing unambiguous rises in HE decomposition products (e.g., CO 2 ) even when the other indicators (e.g., sound, video) were inconclusive. The impact tests performed with a bare anvil showed much better reproducibility than those conducted with sandpaper, reducing the largest uncertainty observed in the data sets by a factor of 1.7. The DH 50 values obtained from three different sample masses (10, 20, and 35 mg) fell within the uncertainties of the measurements. We demonstrated the improved procedure (i.e., 10-mg samples, gas analysis, bare anvil, and Bayesian approach) on a variety of PETN samples having different surface areas and thermal histories.

PETN↗

Episodes of Warm-Air Advection Causing Cloud-Surface Decoupling During the MARCUS

It has been understood for decades that advection of a cloud-topped marine boundary layer (CTBL) over warmer sea surface causes the stratification (or decoupling) of the CTBL via the entrainment feedback, a mechanism commonly known as “deepening-warming” decoupling that is typical in subtropics. This study focuses on the opposite direction of advection, that is, low-level warm air advection (LLWAA), and its impacts on the decoupling degree of a CTBL. Our hypothesis is that LLWAA stabilizes a CTBL, causing a decoupling of the CTBL. It is tested for three LLWAA episodes observed during the Measurements of Aerosols, Radiation, and CloUds over the Southern Ocean (MARCUS) field campaign between the Hobart (43°S, 147°E), Australia, and several Antarctic coast stations. By synthesizing the shipborne measurements of CTBL structure, Himawari-8 satellite imagery of cloud fields, and reanalysis of meteorological field, four common characteristics of CTBLs under the LLWAA are found: (1) CTBLs are highly stratified to the extent that penetrations of cumulus into main temperature inversions, which are common for subtropical decoupled CTBLs, do not exist; (2) sea surface temperature is 1–2 K lower than the near-surface air temperature; (3) clouds manifest stratiform with lifetime as long as several tens of hours; and (4) they locate in warm sectors of middle-latitude cyclones. Possible mechanisms for the maintenance of decoupled clouds under LLWAA are discussed in terms of dynamic and thermodynamic factors. Lapse rates of the decoupled CTBLs are markedly lower than those commonly used for passive satellite estimation of cloud top heights.

54 ENVIRONMENTAL SCIENCES↗

Integrating State Data Assimilation and Innovative Model Parameterization Reduces Simulated Carbon Uptake in the Arctic and Boreal Region

Model representation of carbon uptake and storage is essential for accurate projection of the response of the arctic-boreal zone to a rapidly changing climate. Land model estimates of LAI and aboveground biomass that can have a marked influence on model projections of carbon uptake and storage vary substantially in the arctic and boreal zone, making it challenging to correctly evaluate model estimates of Gross Primary Productivity (GPP). To understand and correct bias of LAI and aboveground biomass in the Community Land Model (CLM), we assimilated the 8-day Moderate Resolution Imaging Spectroradiometer (MODIS) LAI observation and a machine learning product of annual aboveground biomass into CLM using an Ensemble Adjustment Kalman Filter (EAKF) in an experimental region including Alaska and Western Canada. Assimilating LAI and aboveground biomass reduced these model estimates by 58% and 72%, respectively. The change of aboveground biomass was consistent with independent estimates of canopy top height at both regional and site levels. The International Land Model Benchmarking system assessment showed that data assimilation significantly improved CLM's performance in simulating the carbon and hydrological cycles, as well as in representing the functional relationships between LAI and other variables. Here, to further reduce the remaining bias in GPP after LAI bias correction, we re-parameterized CLM to account for low temperature suppression of photosynthesis. The LAI bias corrected model that included the new parameterization showed the best agreement with model benchmarks. Combining data assimilation with model parameterization provides a useful framework to assess photosynthetic processes in LSMs.

58 GEOSCIENCES↗

Imaging the radical channel in acetaldehyde photodissociation: Competing mechanisms at energies close to the triplet exit barrier

The photodissociation of acetaldehyde in the radical channel has been studied at wavelengths between 315 and 325 nm using the velocity-map imaging technique. Upon one-photon absorption at 315 nm, the molecule is excited to the first singlet excited state S{sub 1}, which, in turn, undergoes intersystem crossing to the first excited triplet state T{sub 1}. On the triplet surface, the molecule dissociates into CH{sub 3} and HCO radicals with large kinetic energy release (KER), in accordance with the well characterized exit barrier on T{sub 1}. However, at longer wavelengths (>320 nm), which correspond to excitation energies just below the triplet barrier, a sudden change in KER is observed. At these photolysis wavelengths, there is not enough energy to surpass the exit barrier on the triplet state, which leaves the possibility of unimolecular dissociation on S{sub 0} after internal conversion from S{sub 1}. We have characterized the fragments' KER at these wavelengths, as well as determined the energy partitioning for the radical fragments. A new accurate estimate of the barrier height on T{sub 1} is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simple and rapid method for high-resolution visualization of single-ion tracks

Prompt determination of spatial points of single-ion tracks plays a key role in high-energy particle induced-cancer therapy and gene/plant mutations. In this study, a simple method for the high-resolution visualization of single-ion tracks without etching was developed through the use of polyacrylic acid (PAA)-N, N’-methylene bisacrylamide (MBAAm) blend films. One of the steps of the proposed method includes exposure of the irradiated films to water vapor for several minutes. Water vapor was found to promote the cross-linking reaction of PAA and MBAAm to form a bulky cross-linked structure; the ion-track scars were detectable at a nanometer scale by atomic force microscopy. This study demonstrated that each scar is easily distinguishable, and the amount of generated radicals of the ion tracks can be estimated by measuring the height of the scars, even in highly dense ion tracks. This method is suitable for the visualization of the penumbra region in a single-ion track with a high spatial resolution of 50 nm, which is sufficiently small to confirm that a single ion hits a cell nucleus with a size ranging between 5 and 20 μm.

36 MATERIALS SCIENCE↗

Charging/discharging behavior and mechanism of silicon quantum dots embedded in amorphous silicon carbide films

The charging/discharging behavior of Si quantum dots (QDs) embedded in amorphous silicon carbide (a-SiC{sub x}) was investigated based on the Al/insulating layer/Si QDs embedded in a-SiC{sub x}/SiO{sub 2}/p-Si (metal-insulator-quantum dots-oxide-silicon) multilayer structure by capacitance-voltage (C-V) and conductance-voltage (G-V) measurements. Transmission electron microscopy and Raman scattering spectroscopy measurements reveal the microstructure and distribution of Si QDs. The occurrence and shift of conductance peaks indicate the carrier transfer and the charging/discharging behavior of Si QDs. The multilayer structure shows a large memory window of 5.2 eV at ±8 V sweeping voltage. Analysis of the C-V and G-V results allows a quantification of the Coulomb charging energy and the trapped charge density associated with the charging/discharging behavior. It is found that the memory window is related to the size effect, and Si QDs with large size or low Coulomb charging energy can trap two or more electrons by changing the charging voltage. Meanwhile, the estimated lower potential barrier height between Si QD and a-SiC{sub x}, and the lower Coulomb charging energy of Si QDs could enhance the charging and discharging effect of Si QDs and lead to an enlarged memory window. Further studies of the charging/discharging mechanism of Si QDs embedded in a-SiC{sub x} can promote the application of Si QDs in low-power consumption semiconductor memory devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

EVIDENCE OF MULTIPLE SLOW ACOUSTIC OSCILLATIONS IN THE STELLAR FLARING LOOPS OF PROXIMA CENTAURI

We present the first observational evidence of multiple slow acoustic oscillations in the post-flaring loops of the corona of Proxima Centauri using XMM-Newton observations. We find the signature of periodic oscillations localized in the decay phase of the flare in its soft (0.3-10.0 keV) X-ray emissions. Using the standard wavelet tool, we find multiple periodicities of 1261 s and 687 s. These bursty oscillations persist for durations of 90 minutes and 50 minutes, respectively, for more than three cycles. The intensity oscillations with a period of 1261 s may be the signature of the fundamental mode of slow magnetoacoustic waves with a phase speed of 119 km s{sup –1} in a loop of length 7.5 × 10{sup 9} cm, which is initially heated, producing the flare peak temperature of 33 MK and later cooled down in the decay phase and maintained at an average temperature of 7.2 MK. The other period of 687 s may be associated with the first overtone of slow magnetoacoustic oscillations in the flaring loop. The fundamental mode oscillations show dissipation with a damping time of 47 minutes. The period ratio P {sub 1}/P {sub 2} is found to be 1.83, indicating that such oscillations are most likely excited in longitudinal density stratified stellar loops. We estimate the density scale height of the stellar loop system as ∼23 Mm, which is smaller than the hydrostatic scale height of the hot loop system, and implies the existence of non-equilibrium conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

Spin-filter tunneling in superconducting mesa structures with a ferromagnetic manganite interlayer

We have studied the current transport and magnetism in epitaxial hybrid superconducting mesa structures consisting of a cuprate superconductor and superconducting niobium with a manganite LaMnO{sub 3} (LMO) interlayer. We have shown experimentally using magnetic resonance that the magnetization, magnetic anisotropy parameters, and transition temperature to the ferromagnetic state of the interlayer of the structures are analogous to those of an autonomous LMO film grown on a neodymium gallate substrate. The estimate of the barrier height obtained from the dependence of the characteristic resistance of mesa structures on the interlayer thickness has shown the barrier height variation with the thickness in the range of 5–30 mV. The temperature dependences of the conductivity of the mesa structure in the range between superconducting transition temperatures of the superconductors can be described in the theory taking into account the d-wave nature of the superconductivity for one of the electrodes and the spin-filtering of carriers passing through the tunnel interlayer. Spin-filtering is confirmed by the tunnel magnetoresistance and the high sensitivity of mesa structures to a weak external magnetic field in a voltage interval smaller than the gap of niobium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical properties and the determination of interface state density from I–V, C–f and G–f measurements in Ir/Ru/n-InGaN Schottky barrier diode

The electrical properties of the Ir/Ru Schottky contacts on n-InGaN have been investigated by current-voltage (I–V), capacitance-voltage (C–V), capacitance-frequency (C–f) and conductance-frequency (G–f) measurements. The obtained mean barrier height and ideality factor from I–V are 0.61 eV and 1.89. The built-in potential, doping concentration and barrier height values are also estimated from the C–V measurements and the corresponding values are 0.62 V, 1.20 × 1017 cm{sup –3} and 0.79 eV, respectively. The interface state density (N{sub SS}) obtained from forward bias I–V characteristics by considering the series resistance (R{sub S}) values are lower without considering the series resistance (R{sub S}). Furthermore, the interface state density (N{sub SS}) and relaxation time (τ) are also calculated from the experimental C–f and G–f measurements. The N{sub SS} values obtained from the I–V characteristics are almost three orders higher than the N{sub SS} values obtained from the C–f and G–f measurements. The experimental results depict that N{sub SS} and τ are decreased with bias voltage. The frequency dependence of the series resistance (R{sub S}) is attributed to the particular distribution density of interface states.

36 MATERIALS SCIENCE↗

AIF for Vis (Active Inference for simulating human interpretation of data visualization) [SWR-26-084]

AIF for Vis contains the Active Inference models and analysis scripts used to study a simple visualization-interpretation task: estimating the average value of two bars in a bar chart. The work is a proof of concept for translating hypothesized cognitive strategies into executable, inspectable process models. We implement two idealized strategies inspired by dual-process accounts of visualization-aided decision making: *Fast model: a compressed, heuristic strategy that estimates the visual midpoint of the two bars and maintains a single belief over their average. *Slow model: a sequential, analytic strategy that estimates the two bar heights separately and maintains them in working memory before computing an average. Both models use a common Active-Inference-inspired framework for sequential perception, belief updating, action selection, and reporting. Their different internal representations produce distinct predicted vulnerabilities: *the Fast model is more susceptible to tick-salience bias; *the Slow model is more susceptible to working-memory decay. The repository includes the model implementations, scripts used for the experiments reported in the paper, precomputed trial-level results, and plotting scripts.

Goldwyn, Harrison [National Laboratory of the Rock↗

Gulf of Mexico Offshore Wind Energy Hurricane Risk Assessment

NREL's feasibility assessment of offshore wind in the Gulf of Mexico concluded that hurricane risk was one of the major challenges that would need to be overcome for a mature offshore wind industry to develop in the Gulf of Mexico. To ensure the robust design of wind turbines in the Gulf of Mexico, it is critical to understand the added risk posed by the threat of major hurricanes, as those affecting the Gulf of Mexico region have a significant potential to exceed design limits prescribed by the International Electrotechnical Commission (IEC) wind design standards. To satisfy this charge, this project defines the wind hazard for the Gulf of Mexico Offshore Wind Energy area using the hurricane hazard model develop by Applied Research Associates and published extensively in the open literature. In doing so, the return periods associated with the IEC Class 1A and Typhoon Class limit-state hurricanes are estimated on a grid with nominal resolution of 10 km to determine where hurricane risk results in the exceedance of the IEC design criteria. On the same grid, wind speeds hazard contours associated with return periods varying from 50 to 1,000 years are also estimated. An additional challenge in assessing hurricane wind speed risk in the Gulf of Mexico arises from inconsistent terminology across the Saffir-Simpson hurricane scale and the IEC design criteria. Saffir-Simpson definitions are based on 1-minute sustained wind speeds estimated at 10-m height over marine terrain, while the IEC uses a different averaging period (3-second versus 1-minute) and reference height (assumed herein a hub height of 150 m versus 10 m). Employing the latest research on turbulence characteristics of the hurricane boundary layer, conversions between various durations (e.g., 3-seconds, 1-minute, 10-minutes, 1-hour) and between elevations near the surface (10 m) to near hub height (assumed herein 150 m) are developed. IEC Class 1A and Typhoon Class limit states are also provided in terms of an equivalent Saffir-Simpson hurricane wind speed category.

17 WIND ENERGY↗

Allometric, Growth, and Biomass Estimation Models for Acacia dealbata Link.: A Case Study in Serra da Estrela Natural Park (Portugal)

Allometric, growth, and biomass estimation models for the quantification of missing parameters in trees are widely used to estimate the productivity of a stand. However, regarding species with lower economic interest, or exotic invasive species, the creation of these tools did not occur in the same way as for other species, lacking the development of relationships to allow a deeper study of these species. Thus, data were collected in a settlement of Acacia dealbata Link. in Portugal, in an area known for the current infestation of this species. After a bibliographic review, some of the identified models were tested to select those who best fit the characteristics of this stand, which were used to develop relationships that, based on the data collected, would be able to estimate parameters, such as height, volume, or mass. It was found that the models established, at least for the initial 20 years of the life of the trees, followed close to a linear model. However, the model still presents some weaknesses. For being considered an invasive species in Portugal, A. dealbata is frequently controlled, and for this reason it is very difficult to find trees older than 20 years.

Nunes, Leonel J. R. (ORCID:0000000154048163)↗

Clear-air Vertical Air Motion Within the Marine Boundary Layer

The Doppler lidars (DL) at the ARM observatories operate at 1.5-micrometer wavelength and record backscatter and mean Doppler velocity. The DL present at the ARM ENA site records these quantities at a 1-second temporal and 30-meter range resolution. Reported here are daily files containing gridded values of noise-filtered and calibrated backscatter, and noise-filtered mean Doppler velocity. In addition we also report the noise-filtered and calibrated gradient of backscatter that is used to derive estimates of cloud base height. All of the variables are reported at a uniform 5-second temporal resolution and 30-m range resolution. The instrument reported raw backscatter was first corrected for telescope focus function, filtered for noise, and then calibrated by exploiting the constant lidar ratio exhibited during nonprecipitating stratocumulus cloud conditions. Hence, the reported backscatter can be used to derive aerosol and hydrometeor properties. Daily files are reported for the summer Intensive Operational Period (IOP) of the Aerosol, and Cloud and Experiments in the Eastern North Atlantic (ACE-ENA) field campaign. Similar files can be produced for any DL at ARM observatories. Please find below the header of the NetCDF files. double time (time) ; time:Long_Name = "Time" ; time:units = "Seconds from 1970-1-1 0:00:00" ; double height (height) ; height:Long_Name = "Height" ; height:units = "meters" ; double dl_el (time) ; dl_el:Long_Name = "elevation" ; dl_el:units = "degrees"; double dl_beta (time, height) ; dl_beta:Long_Name = "Noise Filtered Calibrated Backscatter" ; dl_beta:units = "1 / (m * Sr)" ; double dl_velo (time, height); dl_velo:Long_Name = "Mean Doppler Velocity" ; dl_velo:units = "m/s" ; double dl_att (time, height) ; dl_att:Long_Name = "Gradient of Backscatter" ; dl_att:units = "1 / (m ^ 2 * Sr)" ; double base (time) ; base:Long_Name = "Cloud base height" ; base:units = "meters" ;

54 ENVIRONMENTAL SCIENCES↗

Astrogeodetic geoid of Japan

Three kinds of astrogeodetic geoid maps for Japan are presented: one referred to the global (18, 18) geoid of the 1973 Smithsonian Standard Earth (III) (SE III), referred to the best-fitting ellipsoid of SE III, and one referred to the reference ellipsoid of the Tokyo datum. Interpolations of the deflection of the vertical are carried out by a least squares estimation method. The geoid height differences obtained are compared with solutions of satellite-derived station positions. Good agreement is found in a comparison with Doppler tracking stations.

Ganeko, Y.↗

An astrogeodetic geoid of Japan

Three kinds of astrogeodetic geoid maps for Japan are presented: one referred to the global (18, 18) geoid of the 1973 Smithsonian Standard Earth (3) (SE 3), one referred to the ellipsoid of the SE 3 system, and one referred to the reference ellipsoid of the Tokyo datum. Interpolations of the deflection of the vertical are carried out by a least squares estimation method. The geoid height differences obtained are compared with solutions of satellite-derived station positions.

Ganeko, Y.↗