SEARCH · Search NASA

Results for “hypersonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS1990

A unique high heat flux facility for testing hypersonic engine components

This paper describes the Hot Gas Facility, a unique, reliable, and cost-effective high-heat-flux facility for testing hypersonic engine components developed at the NASA Lewis Research Center. The Hot Gas Facility is capable of providing heat fluxes ranging from 200 Btu/sq ft per sec on flat surfaces up to 8000 Btu/sq ft per sec at a leading edge stagnation point. The usefulness of the Hot Gas Facility for the NASP community was demonstrated by testing hydrogen-cooled structures over a range of temperatures and pressures. Ranges of the Reynolds numbers, Prandtl numbers, enthalpy, and heat fluxes similar to those expected during hypersonic flights were achieved.

Melis, Matthew E.↗

NASA NTRS1990

Transition and turbulence measurements in hypersonic flows

This paper reviews techniques for transitional- and turbulent-flow measurements and describes current research in support of turbulence modeling. Special attention is given to the potential of applying hot wire and laser velocimeter to measuring turbulent fluctuations in hypersonic flow fields. The results of recent experiments conducted in two hypersonic wind tunnels are presented and compared with previous hot-wire turbulence measurements.

Owen, F. K.↗

NASA NTRS1991

Local and overall aerodynamic coefficients for bodies in hypersonic, rarefied flow

A computational method is given for the prediction of local pressure and viscous shear stress on windward surfaces of bluff, convex, axisymmetric or quasi-axisymmetric, hypersonic bodies in the transitional, rarefied flow regime. Overall aerodynamic forces and moments are computed by integration of the local quantities. The method is based upon a correlation of local pressure and shear stress computed by the direct simulation Monte Carlo (DSMC) numerical technique for cold wall, real gas conditions and some supplemental data from low-density, hypersonic wind tunnels. The relative simplicity of the method makes it feasible to do the necessary calculations with a personal computer. Two-dimensional shapes and leeward surfaces are not included in the scope of the method as it is presented here. Results are compared with DSMC computations for both local and overall coefficients. The latter includes sphere and blunt cone drag as well as lift and pitching moment coefficients for the NASA AFE vehicle at various angles of attack. Very satisfactory agreement is shown.

Potter, J. Leith↗

NASA NTRS1991

Laser diagnostics on a hypersonic combustor

NASA-Langley has implemented a laser-based multipoint/multiparameter diagnostics system at its hypersonic direct-connect combustor, in order to measure both temperature and majority species densities in two dimensions, using spatially-scanned CARS; in addition, line-imaged measurements of radical densities are simultaneously generated by LIF at any of several planes downstream of the fuel injector. Initial experimental trials have demonstrated successful detection of one-dimensional images of OH density, as well as CARS N2-temperature measurements, in the turbulent reaction zone of the hypersonic combustor.

Taylor, David J.↗

NASA NTRS1990

Progress in hypersonic combustion technology with computation and experiment

Design of successful airbreathing engines for operation at near-orbital speeds presents significant challenges in all the disciplines involved, including propulsion. This paper presents a discussion of the important physics of hypersonic combustion and an assessment of the state of the art of ground simulations with pulse facilities and with computational techniques. Recent examples of experimental and computational simulations are presented and discussed. The need for continued application of these tools to establish the credibility and fidelity of engineering design methods for practical hypersonic combustors is emphasized along with the critical need for improved diagnostic methods for hypervelocity reacting flows.

Anderson, Griffin Y.↗

NASA NTRS1990

Some comparisons of linear stability theory with experiment at supersonic and hypersonic speed

Measurements of waves initiated by wind-tunnel sounds are obtained for both supersonic and hypersonic speed. Flat-plate experiments carried out at Mach numbers of 4.5, 3.7, and 2.4 under the condition of laminar tunnel-wall boundary layers whereby a low background fluctuation level prevailed are outlined, as well as flat-plate experiments with sound-induced waves at supersonic speeds. Experimental studies of 'natural' wave growth on sharp cones at zero angle of attack and Mach numbers near 8 are discussed. Attention is focused on experimental research needed on boundary-layer receptivity to eddy Mach-wave radiation, hypersonic speed, and the stability-transition relationship in zero-pressure-gradient layers.

Kendall, James M., Jr.↗

NASA NTRS1991

Multigrid for hypersonic viscous two- and three-dimensional flows

The use of a multigrid method with central differencing to solve the Navier-Stokes equations for hypersonic flows is considered. The time-dependent form of the equations is integrated with an explicit Runge-Kutta scheme accelerated by local time stepping and implicit residual smoothing. Variable coefficients are developed for the implicit process that remove the diffusion limit on the time step, producing significant improvement in convergence. A numerical dissipation formulation that provides good shock-capturing capability for hypersonic flows is presented. This formulation is shown to be a crucial aspect of the multigrid method. Solutions are given for two-dimensional viscous flow over a NACA 0012 airfoil and three-dimensional viscous flow over a blunt biconic.

Turkel, E.↗

NASA NTRS1991

Numerical performance estimates for a generic hypersonic forebody

The computation of a hypersonic flow past the forebody of a hypersonic vehicle is analyzed for two sets of flow conditions: the first represents flow conditions of an experimental test of the model in the Calspan 96-inch shock tunnel, and the second set is chosen to represent actual flight conditions. Solutions are derived for sharp- and blunt-nose versions of the geometry in order to understand the effects of the entropy layer on the forebody pressure and heat transfer rates. Some sensitivity of predicted heating rates to grid refinement is observed, but it is found to be small compared to the effects of bluntness. Real-gas effects are studied for the blunt-nose version at flight-like conditions, and these effects are found to have a significant effect on inlet-face performance measures such as mass capture and kinetic energy efficiency.

Lawrence, Scott L.↗

NASA NTRS1991

A numerical study of the flow establishment time in hypersonic shock tunnels

This paper presents a numerical study of unsteady hypersonic viscous flows in 2D hypersonic shock tunnels. The numerical experiments on the combined nozzle/model flows, utilizing the configurations mounted in the test section of a 14.7-long shock tunnel, which has a design Mach number of Me = 6 and a stagnation temperature of T(0) = 3063 R, have been performed by solving the 2D Navier-Stokes equations with an ADI-type TVD scheme. The flow establishment times around aerodynamic models, such as a flat plate, a biconvex airfoil, thin and thick double wedges, and a circular cylinder, are calculated and compared. The analysis shows that, for the most severely separated case of a circular cylinder, the flow becomes stabilized within about 8 msec including the starting process, and its nondimensional flow establishment time is 46. The flow establishment time increases with increasing length of the separated region and decreases with increasing freestream velocity.

Lee, Jang-Yeon↗

NASA NTRS1989

The simulation of hypersonic flow using a zonal approach

The development of a Navier-Stokes code for the simulation of hypersonic flow will be described. The code uses a zonal philosophy which helps alleviate the grid generation problem for complex configurations and allows an efficient solution procedure. The code has been used to simulate equilibrium flow past a simple generic hypersonic configuration. Validation of the code on a blunt cone has also been conducted.

Flores, Jolen↗

NASA NTRS1991

Validation of engineering methods for predicting hypersonic vehicle controls forces and moments

This work examines the ability of the aerodynamic analysis methods contained in an industry standard conceptual design code, the Aerodynamic Preliminary Analysis System (APAS II), to estimate the forces and moments generated through control surface deflections from low subsonic to high hypersonic speeds. Predicted control forces and moments generated by various control effectors are compared with previously published wind-tunnel and flight-test data for three vehicles: the North American X-15, a hypersonic research airplane concept, and the Space Shuttle Orbiter. Qualitative summaries of the results are given for each force and moment coefficient and each control derivative in the various speed ranges. Results show that all predictions of longitudinal stability and control derivatives are acceptable for use at the conceptual design stage.

Maughmer, M.↗

NASA NTRS1991

Comparison of hypersonic experiments and PNS predictions. I - Aerothermodynamics. II - Aerodynamics

A 3D parabolized Navier-Stokes (PNS) technique is examined in terms of applications to equilibrium-air and perfect-gas hypersonic flows at different Mach numbers and angles of attack. The method renders sublayer approximation unnecessary, and treats axis-normal coupling effects first followed by a shock solution and a corrector step. Predictions of hypersonic flowfields over several blunt conical configurations are found to agree with established wind-tunnel and flight data, although those for the Dhawan-Narasimha (1958) transition model vary from the experimental data. The PNS technique is also applied to predictions of wall-pressure distributions and force and moment data, and the results agree with experimental values. The PNS method allows the calculation of a wide variety of configurations with only a slight increase over traditional computing times.

Bhutta, Bilal A.↗

NASA NTRS1992

Two Algorithms For Hypersonic Computations

Two new algorithms developed containing several desirable features for computation of viscous, hypersonic flows about three-dimensional geometries. Employ upwind-differencing methods, having unsurpassed abiltiy to capture flow-field discontinuities without need for any user-specified smoothing terms. Particularly important in hypersonic computations where many complicated wave structures exist. Both algorithms based on finite-volume formulation to ensure schemes, including boundary conditions, fully conservative.

Molvik, G. A.↗

NASA NTRS1991

Progress with multigrid schemes for hypersonic flow problems

Several multigrid schemes are considered for the numerical computation of viscous hypersonic flows. For each scheme, the basic solution algorithm uses upwind spatial discretization with explicit multistage time stepping. Two level versions of the various multigrid algorithms are applied to the two dimensional advection equation, and Fourier analysis is used to determine their damping properties. The capabilities of the multigrid methods are assessed by solving three different hypersonic flow problems. Some new multigrid schemes based on semicoarsening strategies are shown to be quite effective in relieving the stiffness caused by the high aspect ratio cells required to resolve high Reynolds number flows. These schemes exhibit good convergence rates for Reynolds numbers up to 200 x 10(exp 6) and Mach numbers up to 25.

Radespiel, R.↗

NASA NTRS1992

Experimental research of the aerodynamics of nozzles and plumes at hypersonic speeds

The purpose was to experimentally characterize the flow field created by the interaction of a single expansion ramp nozzle (SERN) flow with a hypersonic external stream. Data were obtained from a generic nozzle/afterbody model in the 3.5 Foot Hypersonic Wind Tunnel of the NASA Ames Research Center. The model design and test planning were performed in close cooperation with members of the National Aero-Space Plane (NASP) computational fluid dynamics (SFD) team, so that the measurements could be used in CFD code validation studies. Presented here is a description of the experiment, the extent of the measurements obtained, and the experimental results.

Keener, Earl R.↗

NASA NTRS1991

The Development of High Order Numerical Techniques for Reentry Simulation of Hypersonic Spacecraft

The primary difficulty encountered when simulating hypersonic flow is that the flow normally includes strong nonlinear discontinuities. These discontinuities fall into three broad classes: shocks, slip-lines, and rarefaction waves. Moreover, in the hypersonic flow regime, the chemistry of hot gases plays a vital role and can not be neglected. These facts combine to make the numerical treatment of spacecraft reentry a most challenging problem. In this work, we develop a class of finite difference schemes that accurately resolve discontinuous solutions to spacecraft reentry flow and are simple to incorporate into existing spacecraft reentry codes.

Sanders, Richard↗

NASA NTRS1991

Flow analysis and design optimization methods for nozzle afterbody of a hypersonic vehicle

This report summarizes the methods developed for the aerodynamic analysis and the shape optimization of the nozzle-afterbody section of a hypersonic vehicle. Initially, exhaust gases were assumed to be air. Internal-external flows around a single scramjet module were analyzed by solving the three dimensional Navier-Stokes equations. Then, exhaust gases were simulated by a cold mixture of Freon and Argon. Two different models were used to compute these multispecies flows as they mixed with the hypersonic airflow. Surface and off-surface properties were successfully compared with the experimental data. In the second phase of this project, the Aerodynamic Design Optimization with Sensitivity analysis (ADOS) was developed. Pre and post optimization sensitivity coefficients were derived and used in this quasi-analytical method. These coefficients were also used to predict inexpensively the flow field around a changed shape when the flow field of an unchanged shape was given. Starting with totally arbitrary initial afterbody shapes, independent computations were converged to the same optimum shape, which rendered the maximum axial thrust.

Baysal, Oktay↗

NASA NTRS1992

The NASA hypersonic research engine program

An overview is provided of the NASA Hypersonic Research Engine Program. The engine concept is described which was evolved, and the accomplishments of the program are summarized. The program was undertaken as an in-depth program of hypersonic airbreathing propulsion research to provide essential inputs to future prototype engine development and decision making. An airbreathing liquid hydrogen fueled research oriented scramjet was to be developed to certain performance goals. The work was many faceted, required aerodynamic design evaluation, structures development, and development of flight systems such as the fuel and control system, but the main objective was the study of the internal aerothermodynamics of the propulsion system.

Rubert, Kennedy F.↗