Search NASA⌕ Search

SEARCH · Search NASA

Results for “impression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Chlorinated Wide-Bandgap Donor Polymer Enabling Annealing Free Nonfullerene Solar Cells with the Efficiency of 11.5%

Substituting the hydrogen atoms on the conjugated side chain of a wide-bandgap polymer J52 with chlorine atoms can simultaneously increase the J sc , V oc , and FF of nonfullerene OSCs, leading to an efficiency boost from 3.78 to 11.53%, which is among the highest efficiencies for as-cast OSCs reported to date. To illustrate the impressive 3-fold PCE enhancement, the chlorination effect on the optical properties and energy levels of polymers, film morphology, and underlying charge dynamics is systematically investigated. Grazing incidence wide-angle X-ray scattering studies show that chlorinated J52-2Cl exhibits strong molecule aggregation, the preferred face-on orientation, and enhanced intermolecular pi-pi interactions, hence increasing the charge carrier mobility by 1 order of magnitude. Moreover, chlorination modifies the miscibility between the donor and acceptor and consequently optimizes the phase separation morphology of J52-2Cl:ITIC blend films. Finallyhese results highlight chlorination as a promising approach to achieve highly efficient as-cast OSCs without any extra treatment.

14 SOLAR ENERGY↗

Tuning Optical and Electronic Properties in Low-Toxicity Organic–Inorganic Hybrid (CH 3 NH 3 ) 3 Bi 2 I 9 under High Pressure

Low-toxicity, air-stable methylammonium bismuth iodide (CH 3 NH 3 ) 3 Bi 2 I 9 has been proposed as a candidate to replace lead-based perovskites as highly efficient light absorbers for photovoltaic devices. Here, we investigated the effect of pressure on the optoelectronic properties and crystal structure of (CH 3 NH 3 ) 3 Bi 2 I 9 up to 65 GPa at room temperature. We achieved impressive photoluminescence enhancement and band gap narrowing over a moderate pressure range. Dramatic piezochromism from transparent red to opaque black was observed in a single crystal sample. A structural phase transition from hexagonal P6 3 / mmc to monoclinic P21 at 5.0 GPa and completely reversible amorphization at 29.1 GPa were determined by in situ synchrotron X-ray diffraction. Moreover, the dynamically disordered MA + organic cations in the hexagonal phase became orientationally ordered upon entering into the monoclinic phase, followed by static disorder upon amorphization. The striking enhancement of conductivity and metallization under high pressure indicate wholly new electronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Overlooked Potential of Sulfated Zirconia: Reexamining Solid Superacidity Toward the Controlled Depolymerization of Polyolefins

Closed-loop recycling via an efficient chemical process can help alleviate the global plastic waste crisis. However, conventional depolymerization methods for polyolefins, which compose more than 50% of plastics, demand high temperatures and pressures, employ precious noble metals, and yield complex mixtures of products limited to single-use fuels or oils. Superacidic sulfated zirconia (SZrO) with Hammet Acidity Functions (H 0 ) = -12 (i.e., stronger than 100% H 2 SO 4 ) is an industrially deployed heterogeneous catalyst capable of activating hydrocarbons under mild conditions and is shown to decompose polyolefins at ambient pressure and temperatures near 200 °C. Additionally, confinement of active sites in porous supports is known to radically increase selectivity, coking and sintering resistance, and acid site activity, presenting a possible approach to low-energy polyolefin depolymerization. However, a critical examination of the literature on SZrO led us to a surprising conclusion: despite 40 years of catalytic study, engineering, and industrial use, the surface chemistry of SZrO is poorly understood. Ostensibly spurred by SZrO's impressive catalytic activity, the application-driven study of SZrO has resulted in deleterious ambiguity in requisite synthetic conditions and insufficient characterization of acidity, porosity, and active site structure. Here, this ambiguity has produced significant knowledge gaps surrounding the synthesis, structure, and mechanisms of hydrocarbon activation for optimized SZrO, stunting the potential of this catalyst in olefin cracking and other industrially relevant reactions, such as isomerization, esterification, and alkylation. Toward mitigating these long extant issues, we herein identify and highlight these current shortcomings and knowledge gaps, propose explicit guidelines for characterization of and reporting on characterization of solid acidity, and discuss the potential of pore-confined superacids in the efficient and selective depolymerization of polyolefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Photoluminescence Quantum Yield in Band Gap Tunable Bromide Containing Mixed Halide Perovskites

Hybrid organic-inorganic halide perovskite based semiconductor materials are attractive for use in a wide range of optoelectronic devices because they combine the advantages of suitable optoelectronic attributes and simultaneously low-cost solution processability. Here, we present a two-step low-pressure vapor-assisted solution process to grow high quality homogeneous CH 3 NH 3 PbI 3-x Br x perovskite films over the full band gap range of 1.6-2.3 eV. Photoluminescence light-in versus light-out characterization techniques are used to provide new insights into the optoelectronic properties of Br-containing hybrid organic-inorganic perovskites as a function of optical carrier injection by employing pump-powers over a 6 orders of magnitude dynamic range. The internal luminescence quantum yield of wide band gap perovskites reaches impressive values up to 30%. This high quantum yield translates into substantial quasi-Fermi level splitting and high "luminescence or optically implied" open-circuit voltage. Most importantly, both attributes, high internal quantum yield and high optically implied open-circuit voltage, are demonstrated over the entire band gap range (1.6 eV ≤ E g ≤ 2.3 eV). These results establish the versatility of Br-containing perovskite semiconductors for a variety of applications and especially for the use as high-quality top cell in tandem photovoltaic devices in combination with industry dominant Si bottom cells. (Figure Presented).

36 MATERIALS SCIENCE↗

Improved Sodium-Ion Storage Performance of Ultrasmall Iron Selenide Nanoparticles

Sodium-ion batteries are potential low-cost alternatives to current lithium-ion technology, yet their performances still fall short of expectation due to the lack of suitable electrode materials with large capacity, long-term cycling stability, and high-rate performance. In this work, we demonstrated that ultrasmall (similar to 5 nm) iron selenide (FeSe 2 ) nanoparticles exhibited a remarkable activity for sodium-ion storage. Here, they were prepared from a high-temperature solution method with a narrow; size distribution and high yield and could be readily redispersed in nonpolar organic solvents. In ether-based electrolyte, FeSe 2 nanoparticles exhibited a large specific capacity of similar to 500 mAh/g (close to the theoretical limit), high rate capability with, similar to 250 mAh/g retained at 10 A/g, and excellent cycling stability at both low and high current rates by virtue of their advantageous nanositing effect. Full sodium-ion batteries were also constructed from coupling FeSe 2 with NASICON-type Na 3 V 2 (PO 4 ) 3 cathode and demonstrated impressive capacity and cycle ability.

25 ENERGY STORAGE↗

pH-Dependent Assembly of Porphyrin–Silica Nanocomposites and Their Application in Targeted Photodynamic Therapy

Structurally controlled nanoparticles, such as core–shell nanocomposite particles by combining two or more compositions, possess enhanced or new functionalities that benefited from the synergistic coupling of the two components. In this paper, we report new nanocomposite particles with self-assembled porphyrin arrays as the core surrounded by amorphous silica as the shell. The synthesis of such nanocomposite nanoparticles was conducted through a combined surfactant micelle confined self-assembly and silicate sol–gel process using optically active porphyrin as a functional building block. Depending on kinetic conditions, these particles exhibit structure and function at multiple length scales and locations. At the molecular scale, the porphyrins as the building blocks provide well-defined macromolecular structures for noncovalent self-assembly and unique chemistry for high-yield generation of singlet oxygen for photodynamic therapy (PDT). On the nanoscale, controlled noncovalent interactions of the porphyrin building block result in an extensive self-assembled porphyrin network that enables efficient energy transfer and impressive fluorescence for cell labeling, evidenced by absorption and photoluminescence spectra. The thin silicate shell on the nanoparticle surface allows easy functionalization, and the resultant targeting porphyrin-silica nanocomposites can selectively destroy tumor cells upon receiving light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Performance Pt–Co Nanoframes for Fuel-Cell Electrocatalysis

Pt-based alloy catalysts are promising candidates for fuel-cell applications, especially for cathodic oxygen reduction reaction (ORR) and anodic methanol oxidation reaction (MOR). The rational design of composition and morphology is crucial to promoting catalytic performances. Here, we report the synthesis of Pt–Co nanoframes via chemical etching of Co from solid rhombic dodecahedra. The obtained Pt–Co nanoframes exhibit excellent ORR mass activity in acidic electrolyte, which is as high as 0.40 A mg Pt –1 initially and 0.34 A mg Pt –1 after 10 000 potential cycles at 0.95 V RHE . Furthermore, their MOR mass activity in alkaline media is up to 4.28 A mg Pt –1 and is 4-fold higher than that of commercial Pt/C catalyst. Furthermore, experimental studies indicate that the weakened binding of intermediate carbonaceous poison contributes to the enhanced MOR behavior. More impressively, the Pt–Co nanoframes also demonstrate remarkable stability under long-term testing, which could be attributed to the negligible electrochemical Co dissolution.

25 ENERGY STORAGE↗

Influence of Water Transport Across Microscale Bipolar Interfaces on the Performance of Direct Borohydride Fuel Cells

Direct borohydride fuel cells (DBFCs) can operate at double the voltage of proton exchange membrane fuel cells (PEMFCs) by employing an alkaline NaBH 4 fuel feed and an acidic H 2 O 2 oxidant feed. The pH-gradient-enabled microscale bipolar interface (PMBI) facilitates the creation and maintenance of an alkaline environment at the anode and an acidic environment at the cathode for the borohydride oxidation and peroxide reduction reactions. However, given the need to dissociate water at the interface to ensure ionic conduction, PMBI can be efficient only when anion exchange ionomer (AEI) moieties enable fast water transport for autoprotolysis. Herein, a series of polynorbornene-based AEIs with a range of water uptake values are examined to unravel the optimum water uptake required to enable high performance DBFCs. The DBFC with PMBI configuration containing the optimal AEI composition delivers a current density of 302 mA cm –2 at 1.5 V and a peak power density of 580 mW cm –2 at 1 V. This AEI composition exhibits high hydroxide ionic conductivity of 90.7 mS cm –1 at 80 °C with an IEC of 2.01 mequiv g –1 and demonstrates impressive chemical stability by retaining 98.75% of its initial ionic conductivity after immersion into anolyte (3 M KOH and 1.5 M NaBH 4 ) at 70 °C for 536 h.

25 ENERGY STORAGE↗

A Multidimensional Operando Study Showing the Importance of the Electrode Macrostructure in Lithium Sulfur Batteries

Lithium sulfur batteries are one of the most promising next-generation energy storage technologies, because of their impressive theoretical energy density, low materials cost, and relative safety. However, incomplete understanding of their underlying operation mechanisms has hindered their further development and commercialization. In this work, to gain a better understanding of the operation mechanisms in the lithium sulfur battery, three macroscopically different (woven and nonwoven) and microscopically similar (made from the same carbon fibers) free-standing carbon felts are used as the conductive matrices to show how the macrostructure influences the redox reactions and the electrochemical performance. Additionally, an operando radiography and simultaneous in situ electrochemical impedance spectroscopy study are performed to highlight the differences of the carbon hosts and how they compare electrochemically in a lithium sulfur battery. The electrochemical results show that the carbon host with a more open structure results in increased capacity as well as a higher diffusion coefficient. The operando radiography shows that the open structures are more conducive to efficient redox reactivity in forming solid sulfur species, mostly in the form of elongated needlelike structures identified as β-S8, near the end of charge, which is corroborated by the impedance data. The data also reveal a “breathing” mechanism, where the polysulfides are pushed to the edges during discharge and pulled back during charge. Furthermore, it is also revealed that the “breathing” process is a limiting factor in the high rate performance. Overall, this study shows that there is a close relationship between the macrostructure of the carbon matrix and the electrochemical performance of the sulfur cathode.

25 ENERGY STORAGE↗

Ion-Assisted Ligand Exchange for Efficient and Stable Inverted FAPbI 3 Quantum Dot Solar Cells

Perovskite quantum dot (QD) has emerged as a promising material for photovoltaics with its superior stability compared to their three-dimensional bulk counterparts, owing to its thermodynamically stabilized photoactive phase. However, ligand management on perovskite QD surfaces is extremely difficult due to the ionic nature of the perovskite lattice, which often leads to either incomplete removal of the native insulating ligands or formation of trap states during the ligand-exchange process, greatly hampering the photovoltaic performances. In this work, we report an ion-assisted ligand-exchange method for FAPbI 3 QDs using AOAc (A = formamidinium (FA + ), guanidinium (GA + ), and phenethylammonium (PEA + ), OAc = acetate), with the A + and OAC - ions promoting the removal of native long-chain insulating ligands. Further, the more complete ligand exchange results in dense and well-oriented packing of QDs, together with the enhancement of electronic coupling and charge transport across QDs. In addition, the A + and OAC - ions can fill the surface A-/X-site vacancies, respectively, reducing the QD surface trap state density and hence suppressing charge recombination and iodide migration. The p-i-n inverted QD solar cells fabricated with this ligand-exchange method exhibit significant enhancement in shortcircuit current density (J SC ), reaching a PCE of 10.13%. Moreover, unencapsulated devices show impressive stabilities of more than 7300 h (10 months) storage time in a N 2 -filled glovebox.

36 MATERIALS SCIENCE↗

Revealing the Structural Stability and Na-Ion Mobility of 3D Superionic Conductor Na 3 SbS 4 at Extremely Low Temperatures

All-solid-state batteries that employ superionic solid conductor potentially enable the broadening of battery operation in harsh environments, such as under subzero temperatures and even lower. The solid electrolyte as the key component requires structural stability, high-efficiency of ion transportation channels, and low activation energy to maintain the fast-ionic conduction against temperature drop. Herein, we use 3D superionic conductor Na 3 SbS 4 as a model to investigate the structure and conductive mechanism at extremely low temperature. Cryogenic in situ neutron and X-ray diffractions reveal that Na 3 SbS 4 maintains a stable tetragonal crystal structure and the anisotropic lattice contraction upon cooling. The dimensions of the S-gate (represented by the S–S pair length) that Na ions hop through in the 3D transportation network is found to maintain open sizes in the xy -plane, contributing to the low activation energy and impressive ionic conductivity. The Na-ion transportation network is demonstrated to be directionally accessible at the extremely low temperature, which reveals the ion conductive mechanism at broadened temperature range in the view of structure. Furthermore, these findings provide valuable guidance in the search for materials as promising solid electrolyte in solid-state batteries to fulfill harsh environmental needs.

36 MATERIALS SCIENCE↗

Hydrogen-Bonding Interactions in Hybrid Aqueous/Nonaqueous Electrolytes Enable Low-Cost and Long-Lifespan Sodium-Ion Storage

Although “water-in-salt” electrolytes have opened a new pathway to expand the electrochemical stability window of aqueous electrolytes, the electrode instability and irreversible proton co-insertion caused by aqueous media still hinder the practical application, even when using exotic fluorinated salts. In this study, an accessible hybrid electrolyte class based on common sodium salts is proposed, and crucially an ethanol-rich media is introduced to achieve highly stable Na-ion electrochemistry. Here, ethanol exerts a strong hydrogen-bonding effect on water, simultaneously expanding the electrochemical stability window of the hybridized electrolyte to 2.5 V, restricting degradation activities, reducing transition metal dissolution from the cathode material, and improving electrolyte–electrode wettability. The binary ethanol–water solvent enables the impressive cycling of sodium-ion batteries based on perchlorate, chloride, and acetate electrolyte salts. Notably, a Na 0.44 MnO 2 electrode exhibits both high capacity (81 mAh g –1 ) and a remarkably long cycle life >1000 cycles at 100 mA g –1 (a capacity decay rate per cycle of 0.024%) in a 1 M sodium acetate system. The Na 0.44 MnO 2 /Zn full cells also show excellent cycling stability and rate capability in a wide temperature range. The gained understanding of the hydrogen-bonding interactions in the hybridized electrolyte can provide new battery chemistry guidelines in designing promising candidates for developing low-cost and long-lifespan batteries based on other (Li + , K + , Zn 2+ , Mg 2+ , and Al 3+ ) systems.

25 ENERGY STORAGE↗

Reduced Recombination and Improved Performance of CdSe/CdTe Solar Cells due to Cu Migration Induced by Light Soaking

The performance of CdTe solar cells has advanced impressively in recent years with the incorporation of Se. Instabilities associated with light soaking and copper reorganization have been extensively examined for the previous generation of CdS/CdTe solar cells, but instabilities in Cu-doped Se-alloyed CdTe devices remain relatively unexplored. In this work, we fabricated a range of CdSe/CdTe solar cells by sputtering CdSe layers with thicknesses of 100, 120, 150, 180, and 200 nm on transparent oxide-coated glass and then depositing CdTe by close-spaced sublimation. After CdCl 2 annealing, Cu-doping, and back metal deposition, a variety of analyses were performed both before and after light soaking to understand the changes in device performance. The device efficiency was degraded with light soaking in most cases, but devices fabricated with a CdSe layer thickness of 120 nm showed reasonably good efficiency initially (13.5%) and a dramatic improvement with light soaking (16.5%). Here, the efficiency improvement is examined within the context of Cu ion reorganization that is well known for CdS/CdTe devices. Low-temperature photoluminescence data and V oc versus temperature measurements indicate a reduction in nonradiative recombination due to the passivation of defects and defect complexes in the graded CdSe x Te 1–x layer.

CdSexTe1−x↗

Synthesis of Fluorine-Doped Lithium Argyrodite Solid Electrolytes for Solid-State Lithium Metal Batteries

Solid-state lithium metal batteries (SSLMBs) that utilize novel solid electrolytes (SEs) have garnered much attention because of their potential to yield safe and high-energy-density batteries. Sulfide-based argyrodite-class SEs are an attractive option because of their impressive ionic conductivity. Recent studies have shown that LiF at the interface between Li and SE enhances electrochemical stability. However, the synthesis of F-doped argyrodites has remained challenging because of the high temperatures used in the state-of-the-art solid-state synthesis methods. In this work, for the f irst time, we report F-doped Li 5+y PS 5 F y argyrodites with a tunable doping content and dual dopants (F-/Cl- and F-/Br-) that were synthesized through a solvent-based approach. Among all compositions, Li 6 PS 5 F 0.5 C l0.5 exhibits the highest Li-ion conductivity of 3.5 x 10 -4 S cm -1 at room temperature (RT). Furthermore, Li symmetric cells using Li 6 PS 5 F 0.5 Cl 0.5 show the best cycling performance among the tested cells. X-ray photoelectron spectroscopy and ab initio molecular dynamics simulations revealed that the enhanced interfacial stability of Li 6 PS 5 F 0.5 C l0.5 SE against Li metal can be attributed to the formation of a stable solid electrolyte interphase (SEI)-containing conductive species (Li 3 P), alongside LiCl and LiF. These findings open new opportunities to develop high-performance SSLMBs using a novel class of F-doped argyrodite electrolytes.

25 ENERGY STORAGE↗

Robust Copper-Based Nanosponge Architecture Decorated by Ruthenium with Enhanced Electrocatalytic Performance for Ambient Nitrogen Reduction to Ammonia

Electrochemical conversion of nitrogen to green ammonia is an attractive alternative to the Haber–Bosch process. However, it is currently bottlenecked by the lack of highly efficient electrocatalysts to drive the sluggish nitrogen reduction reaction (N2RR). In this work, we strategically design a cost-effective bimetallic Ru–Cu mixture catalyst in a nanosponge (NS) architecture via a rapid and facile method. The porous NS mixture catalysts exhibit a large electrochemical active surface area and enhanced specific activity arising from the charge redistribution for improved activation and adsorption of the activated nitrogen species. Benefiting from the synergistic effect of the Cu constituent on morphology decoration and thermodynamic suppression of the competing hydrogen evolution reaction, the optimized Ru 0.15 Cu 0.85 NS catalyst presents an impressive N 2 RR performance with an ammonia yield rate of 26.25 μg h –1 mg cat. –1 (corresponding to 10.5 μg h –1 cm –2 ) and Faradic efficiency of 4.39% as well as superior stability in alkaline medium, which was superior to that of monometallic Ru and Cu nanostructures. Additionally, this work develops a new bimetallic combination of Ru and Cu, which promotes the strategy to design efficient electrocatalysts for electrochemical ammonia production under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Linker Identity on the Photochemistry of Uranyl-Organic Frameworks

While uranyl-based metal–organic frameworks (MOFs) boast impressive photocatalytic abilities, significant questions remain regarding their excitation pathways and methods to fine-tune their performance due to the lack of information regarding heterogeneous uranyl catalysis. Herein, we investigated how linker identity and photoexcitation impact uranyl photocatalysis when the uranyl coordination environment remains constant. Toward this end, we prepared three uranyl-based MOFs (NU-1301, NU-1307, and ZnTCPP-U2) and then examined the structural and photochemical properties of each through X-ray diffraction, X-ray absorption, and photoluminescence. We then correlated our observations to the photocatalytic performance for fluorination of cyclooctane. The excitation profile from NU-1301 and NU-1307 exhibited spin-forbidden linker transitions and uranyl vibronic progressions, with uranyl excitation and emission being most dominant in NU-1301. Consequently, NU-1301 was a more active photocatalyst than NU-1307. In contrast, the excitation profile from ZnTCPP-U2 contained transitions associated with the porphyrin linker exclusively. Photocatalytic activity from ZnTCPP-U2 significantly underperformed in comparison to that of the other two MOFs. Furthermore, these data suggest that linkers’ photophysical properties can be used to predict the photocatalytic behavior of uranyl-containing MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ketjenblack-Supported and Unsupported ZrO 2 –ZrN Nanoparticle Systems for Enabling Efficient Electrochemical Nitrogen Reduction to Ammonia

Artificial N 2 fixation via the electrocatalytic nitrogen (N 2 ) reduction reaction (NRR) has been recently promoted as a rational route toward reducing energy consumption and CO 2 emission as compared with the traditional Haber–Bosch process. Nevertheless, optimizing NRR relies on developing highly efficient electrocatalysts. Herein, we report on the reliable and reproducible synthesis of two promising electrocatalysts in either the presence or absence of Ketjenblack (KB), namely, ZrO 2 –ZrN@KB and ZrO 2 –ZrN systems, synthesized through the nitriding of Zr. Both materials had never previously been considered for NRR, to the best of our knowledge. Nevertheless, both of these electrocatalysts incorporated a combination of tetragonal ZrO 2 , ZrON, and cubic ZrN and showed excellent activity and durability toward NH 3 formation. Moreover, the maximum NH3 production rate of 84.1 μg h –1 mg –1 at -0.7 V vs a reversible hydrogen electrode (RHE) was achieved with the ZrO 2 –ZrN electrocatalyst with an impressive Faradaic efficiency of 21.2% at -0.6 V vs RHE, indicating a high selectivity associated with the NRR. Additionally, the catalysts demonstrated excellent stability during the electrolysis process and recycling tests. Here we postulate that the combination of exposed active sites of ZrN and ZrO 2 likely contributes to the enhanced NRR performance attributed to ZrO 2 –ZrN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Efficient Luminescent Metal–Organic Framework for the Simultaneous Detection and Removal of Heavy Metals from Water

For this work, we have designed and synthesized an isoreticular series of luminescent metal-organic frameworks (LMOFs) by incorporating a strongly emissive molecular fluorophore and functionally diverse colinkers into Zn-based structures. The three-dimensional porous networks of LMOF-261, -262, and -263 represent a unique/new type of nets, classified as a 2-nodal, (4,4)-c net (mot-e type) with 4-fold, class IIIa interpenetration. All compounds crystallize in a body-centered tetragonal crystal system (space group I4 1 /a). A systematic study has been implemented to analyze their interactions with heavy metals. LMOF-263 exhibits impressive water stability, high porosity, and strong luminescence, making it an excellent candidate as a fluorescent chemical sensor and adsorbent for aqueous contaminants. It is extremely responsive to toxic heavy metals at a parts per billion level (3.3 ppb Hg 2+ , 19.7 ppb Pb 2+ ) and demonstrates high selectivity for heavy metals over light metals, with detection ratios of 167.4 and 209.5 for Hg 2+ /Ca 2+ and Hg 2+ /Mg 2+ , respectively. Mixed-metal adsorption experiments also show that LMOF-263 selectively adsorbs Hg 2+ over other heavy metal ions in addition to light metals. The Pb 2+ K SV value for LMOF-263 (55,017 M -1 ) is the highest among LMOFs reported to date, and the Hg 2+ K SV value is the second highest (459,446 M -1 ). LMOF-263 exhibits a maximum adsorption capacity of 380 mg Hg 2+ /g. The Hg 2+ adsorption process follows pseudo-second-order kinetics, removing 99.1% of the metal within 30 min. An in situ XPS study provides insight to help understand the interaction mechanism between Hg 2+ and LMOF-263. No other MOFs have demonstrated such a high performance in both the detection and the capture of Hg 2+ from aqueous solution.

36 MATERIALS SCIENCE↗