Search NASA⌕ Search

SEARCH · Search NASA

Results for “interior structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Shallow moonquakes - Depth, distribution and implications as to the present state of the lunar interior

The observed seismic amplitudes of HFT (high-frequency teleseismic) events do not vary with distance as expected for surface sources, but are consistent with sources in the upper mantle of the moon. Thus, the upper mantle of the moon is the only zone where tectonic stresses deriving from differential thermal contraction and expansion of the lunar interior are presently high enough to cause moonquakes. The distribution of shallow moonquake epicenters suggests a possible correlation with impact basins, implying a lasting tectonic influence of impact basins long after their formation. The finite depths now assigned to these shallow moonquakes necessitate further revision to the seismic structural model of the lunar interior.

Nakamura, Y.↗
NASA NTRS1991

Periodically spaced fragmentation in Orion A

Evidence is found for periodic density structure in the highly fragmented interior of the Orion A molecular cloud from analysis of a large scale map of C(O-18) J = 1 - 0 emission. The spatial wavelength is about 1 parsec, and extends at least over 2 degrees along the main filament of Orion A and is also observed in other filamentary structures in Orion. This periodicity in the clumps is a result of externally triggered and magnetically mediated cloud collapse and fragmentation.

Dutrey, A.↗
NASA NTRS2005

Modeling of Turbulent Boundary Layer Surface Pressure Fluctuation Auto and Cross Spectra - Verification and Adjustments Based on TU-144LL Data

The literature on turbulent boundary layer pressure fluctuations provides several empirical models which were compared to the measured TU-144 data. The Efimtsov model showed the best agreement. Adjustments were made to improve its agreement further, consisting of the addition of a broad band peak in the mid frequencies, and a minor modification to the high frequency rolloff. The adjusted Efimtsov predicted and measured results are compared for both subsonic and supersonic flight conditions. Measurements in the forward and middle portions of the fuselage have better agreement with the model than those from the aft portion. For High Speed Civil Transport supersonic cruise, interior levels predicted by use of this model are expected to increase by 1-3 dB due to the adjustments to the Efimtsov model. The space-time cross-correlations and cross-spectra of the fluctuating surface pressure were also investigated. This analysis is an important ingredient in structural acoustic models of aircraft interior noise. Once again the measured data were compared to the predicted levels from the Efimtsov model.

Rackl, Robert↗
NASA NTRS2012

Anomalously Weak Solar Convection

Convection in the solar interior is thought to comprise structures on a spectrum of scales. This conclusion emerges from phenomenological studies and numerical simulations, though neither covers the proper range of dynamical parameters of solar convection. Here, we analyze observations of the wavefield in the solar photosphere using techniques of time-distance helioseismology to image flows in the solar interior. We downsample and synthesize 900 billion wavefield observations to produce 3 billion cross-correlations, which we average and fit, measuring 5 million wave travel times. Using these travel times, we deduce the underlying flow systems and study their statistics to bound convective velocity magnitudes in the solar interior, as a function of depth and spherical- harmonic degree l..Within the wavenumber band l < 60, convective velocities are 20-100 times weaker than current theoretical estimates. This constraint suggests the prevalence of a different paradigm of turbulence from that predicted by existing models, prompting the question: what mechanism transports the heat flux of a solar luminosity outwards? Advection is dominated by Coriolis forces for wavenumbers l < 60, with Rossby numbers smaller than approximately 10(exp −2) at r∕R-solar = 0.96, suggesting that the Sun may be a much faster rotator than previously thought, and that large-scale convection may be quasi-geostrophic. The fact that isorotation contours in the Sun are not coaligned with the axis of rotation suggests the presence of a latitudinal entropy gradient.

Sun↗
NASA NTRS1987

High pressure cosmochemistry of major planetary interiors: Laboratory studies of the water-rich region of the system ammonia-water

Several studies relative to high pressure cosmochemistry of major planetary interiors are summarized. The behavior of gas-ice mixtures at very high pressures, studies of the phase diagram of (NH3) sub x (H2O) sub 1-x at pressures to 5GPa and temperatures from 240 to 370 K, single crystal growth of ammonia dihydrate at room temperature in order to determine their structures by x-ray diffraction, spectroscopy of chemical reactions during shock compression in order to evaluate how the reactions affect the interpretation of equation of state data obtained by shock methods, and temperature and x-ray diffraction measurements made on resistively heated wire in diamond anvil cells in order to obtain phase and structural data relevant to the interiors of terrestrial planets are among the studies discussed.

Nicol, Malcolm↗
NASA NTRS1997

Robust Feedback Control of Flow Induced Structural Radiation of Sound

A significant component of the interior noise of aircraft and automobiles is a result of turbulent boundary layer excitation of the vehicular structure. In this work, active robust feedback control of the noise due to this non-predictable excitation is investigated. Both an analytical model and experimental investigations are used to determine the characteristics of the flow induced structural sound radiation problem. The problem is shown to be broadband in nature with large system uncertainties associated with the various operating conditions. Furthermore the delay associated with sound propagation is shown to restrict the use of microphone feedback. The state of the art control methodologies, IL synthesis and adaptive feedback control, are evaluated and shown to have limited success for solving this problem. A robust frequency domain controller design methodology is developed for the problem of sound radiated from turbulent flow driven plates. The control design methodology uses frequency domain sequential loop shaping techniques. System uncertainty, sound pressure level reduction performance, and actuator constraints are included in the design process. Using this design method, phase lag was added using non-minimum phase zeros such that the beneficial plant dynamics could be used. This general control approach has application to lightly damped vibration and sound radiation problems where there are high bandwidth control objectives requiring a low controller DC gain and controller order.

Heatwole, Craig M.↗
DOE OSTI2025

Experiments to validate Thermodynamics and Transport models of Strongly Coupled Dusty Plasma Matter (Final Technical Report for DE-SC0023416)

The goal of this two-year grant is to provide access to the PI to dusty plasma experimental facilities at the DOE-funded Collaborative Research Facility Magnetized Plasma Research Laboratory, Auburn University to become a user of that facility, to obtain experimental data to support another ongoing grant DE-SC0021146 (an Early Career Award to the PI that is focused on modeling of dusty plasma thermodynamics and transport processes), to generate experimental data for funding proposals, and to provide exposure to University of Memphis students to advanced experimental techniques. The following technical accomplishments were made: 1. Development of a novel Bidirectional Electrode Control Arms Assembly (BECAA) for producing perfect 2D grain layers for complex plasma experimentation. BECAA uses movable electrode arms to tilt or move the electrode in a RF discharge from outside the chamber, allowing for the manipulation of grain clouds without needing to change the plasma parameters or gas pressure. This work addresses a longstanding gap in the literature for a method to produce clusters of selectable number of grains and that are perfectly two dimensional as opposed to being only quasi-2D. 2. Experimental investigation of the structural properties of finite-N clusters with N=2 to 50. Individual particle behavior in clusters could vary from grain to grain and this study measured systematically produced clusters for two different grain sizes. Analysis (funded by another grant DE-SC0021146) is currently underway to quantify the differences between grains that are found on the surface vs. the interior of clusters, the shell structure, and the decay of correlations in position, velocity, and kinetic energy. 3. An experimental method to measure the structural entropy of clusters was developed by observing the self-induced structural transitions between various possible arrangements. In a series of heating and cooling cycles, the number of times each possible arrangement was attained was experimentally observed and used to compute the probability of existence of that arrangement, and subsequently the configurational entropy of the cluster. Analysis (funded by another grant DE-SC0021146) is currently underway to produce the entropy of clusters as a function of the number of grains and use the same to compute thermodynamic state variables for 2D complex plasma/grain clusters. 4. A preliminary experimental study of multibody collisions between N grains (N=2 – 10) was conducted. The clusters were produced using the BECAA technique and velocities were imparted to the grains using manipulation laser pulses. Analysis (funded by another grant DE-SC0021146) is currently underway to develop a theoretical framework to describe multibody collisions analogous to classical two-body interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Electron ptychography reveals a ferroelectricity dominated by anion displacements

Sodium niobate, a lead-free ferroic material, hosts delicately balanced, competing order parameters, including ferroelectric states that can be stabilized by epitaxial strain. Here we show that the resulting macroscopic ferroelectricity exhibits an unconventional microscopic structure using multislice electron ptychography. This technique overcomes multiple scattering artefacts limiting conventional electron microscopy, enabling both lateral spatial resolution beyond the diffraction limit and recovery of three-dimensional structural information. These imaging capabilities allow us to separate the ferroelectric interior of the sample from the relaxed surface structure and identify the soft phonon mode and related structural distortions with picometre precision. Unlike conventional ferroelectric perovskites, we find that the polar distortion in this material involves minimal distortions of the cation sublattices and is instead dominated by anion displacements relative to the niobium sublattice. We establish limits on film thickness for interfacial octahedral rotation engineering and directly visualize a random octahedral rotation pattern, arising from the flat dispersion of the associated phonon mode.

ferroelectrics and multiferroics↗
NASA NTRS2008

Millimeter Wave Synthetic Aperture Imaging System with a Unique Rotary Scanning System

In recent years, millimeter wave imaging techniques, using synthetic aperture focusing and holographical approaches, have shown tremendous potential for nondestructive testing applications, involving materials and structures used in space vehicles, including the space shuttle external fuel tank spray on foam insulation and its acreage heat tiles. The ability of signals at millimeter wave frequencies (30 - 300 GHz) to easily penetrate inside of low loss dielectric materials, their relatively small wavelengths, and the possibility of detecting coherent (magnitude and phase) reflections make them suitable for high resolution synthetic aperture focused imaging the interior of such materials and structures. To accommodate imaging requirements, commonly a scanning system is employed that provides for a raster scan of the desired structure. However, most such scanners, although simple in design and construction, are inherently slow primarily due to the need to stop and start at the beginning and end of each scan line. To this end, a millimeter wave synthetic aperture focusing system including a custom-designed transceiver operating at 35 - 45 GHz (Q-band) and unique and complex rotary scanner was designed and developed. The rotary scanner is capable of scanning an area with approximately 80 cm in diameter in less than 10 minutes at step sizes of 3 mm and smaller. The transceiver is capable of producing accurate magnitude and phase of reflected signal from the structure under test. Finally, a synthetic aperture focusing algorithm was developed that translates this rotary-obtained magnitude and phase into a synthetic aperture focusing image of inspected structures. This paper presents the design of the transceiver and the rotary scanning system along with showing several images obtained with this system from various complicated structures.

Ghasr, M. T.↗
NASA NTRSDate not supplied

Internal Layout of a Lunar Surface Habitat

NASA is currently developing concepts for sustained crewed missions to the lunar surface. Sustained missions will occur on annual basis for durations of 30 days or more. To house and support the crew, NASA is exploring the use of a lunar Surface Habitat. NASA relies on conceptual spacecraft design to assist in planning and mission analysis. A crucial component of this habitation design is the internal layout: the interior location of systems, workstations, crew quarters, etc. The purpose of this paper is to describe the process and resulting layout of a specific Surface Habitat design. This paper describes the SH’s hybrid inflatable structure then details the habitat’s interior layout. The proposed SH’s internal layout is depicted inside a hybrid inflatable structure using a low-fidelity CAD model. Multiple NASA references were consulted to determine the SH’s required functionality, minimal Net Habitable Volume, and minimal functional dimensions. These functions and volumes contribute to the placement and location of systems and spaces inside the habitat. In addition to functional volume, the layout includes systems and logistics placement. The resulting design will aid NASA in mission planning and further systems analysis.

Callie Burke↗
NASA NTRS1993

Spectral analysis of the gravity and topography of Mars

New spherical harmonic models of the gravity and topography of Mars place important constraints on the structure and dynamics of the interior. The gravity and topography models are significantly phase coherent for harmonic degrees n less than 30 (wavelengths greater than 700 km). Loss of coherence below that wavelength is presumably due to inadequacies of the models, rather than a change in behavior of the planet. The gravity/topography admittance reveals two very different spectral domains: for n greater than 4, a simple Airy compensation model, with mean depth of 100 km, faithfully represents the observed pattern; for degrees 2 and 3, the effective compensation depths are 1400 and 550 km, respectively, strongly arguing for dynamic compensation at those wavelengths. The gravity model has been derived from a reanalysis of the tracking data for Mariner 9 and the Viking Orbiters, The topography model was derived by harmonic analysis of the USGS digital elevation model of Mars. Before comparing gravity and topography for internal structure inferences, we must ensure that both are consistently referenced to a hydrostatic datum. For the gravity, this involves removal of hydrostatic components of the even degree zonal coefficients. For the topography, it involves adding the degree 4 equipotential reference surface, to get spherically referenced values, and then subtracting the full degree 50 equipotential. Variance spectra and phase coherence of orthometric heights and gravity anomalies are addressed.

Bills, Bruce G.↗
NASA NTRS1996

Aircraft Interior Noise Control Using Distributed Piezoelectric Actuators

Developing a control system that can reduce the noise and structural vibration at the same time is an important task. This talk presents one possible technical approach for accomplishing this task. The target application of the research is for aircraft interior noise control. The emphasis of the present approach is not on control strategies, but rather on the design of actuators for the control system. In the talk, a theory of distributed piezoelectric actuators is introduced. A uniform cylindrical shell is taken as a simplified model of fuselage structures to illustrate the effectiveness of the design theory. The actuators developed are such that they can reduce the tonal structural vibration and interior noise in a wide range of frequencies. Extensive computer simulations have been done to study various aspects of the design theory. Experiments have also been conducted and the test results strongly support the theoretical development.

Sun, Jian Q.↗
NASA NTRS1994

Physical state of the western U.S. upper mantle

Using observed P wave images of the western U.S. upper mantle, which show lateral variations of up to 8%, and existing scaling relations, we infer that the low-velocity mantle is hot and partially molten to depths of 100-200 km, and that the high-velocity upper mantle is subsolidus. Most the high-velocity upper mantle within a few hundred kilometers of the coastline appears to be relatively dense, suggesting that it is relatively cool (i.e., a thermal lithosphere). This is expected for features associated with the subducting Juan de Fuca and Gorda slabs, and the high velocity upper mantle beneath the Transverse Ranges has been attributed to the sinking of negatively buoyant mantle lithosphere. Other high-velocity mantle structures near the continental margin are consistent with this interpretation. In contrast, the generally high elevations of the continental interior imply a buoyant upper mantle there, an inference that holds for both the high- and the low-velocity upper mantle. The only resonable way to produce the high-velocity low-density upper mantle is through basalt depletion, thereby creating mantle of increased solidus temperature and decreased density. We distinguish a marginal domain, within approximately 250 km of the Pacific coast, from an interior domain. This is based on the inferred upper mantle compositional difference and regional associations: beneath the marginal domain, upper mantle structures trend parallel to the surface physiography and young tectonic structures, whereas upper mantle structures beneath the continental interior trend northeasterly. This northeast orientation is discordant with the young tectonic structures, but aligns with young volcanic activity. The high lateral gradients in observed upper mantle seismic structure found throughout the western United States imply high lateral gradients in the associated temperature or partial melt fields. Because these fields diffuse on time scales of less than a few tens of millions of years, the imaged upper mantle structure is young. The following upper mantle processes are hypothesized to account for these findings and inferences. Away from the plate margin, small-scale upper mantle convection driven by partial melt-induced buoyancy of hot upper mantle leads to the production and segregation of melt and the creation of compositional variations. The heterogeneous upper mantle P wave structure of the elevated continental interior is largely a consequence of partial melt variations that are modulated by the compositional variations, and throughout this region we infer high temperatures and low densities. Near the plate margin, relative plate motions force upper mantle flow, although upper mantle flow driven by the positive buoyancy of melt and the negative bouyancy lithosphere is important locally.

Humphreys, Eugene D.↗
NASA NTRS1994

Multifrequency studies of bright radio supernova remnants. 2: W49B

We report radio observations of the supernova remnant W49B using the Very Large Array (VLA) of the NRAO at 90, 20, and 6 cm. This work continues the study of the properties of young, bright supernova remnants (SNRs) begun with 3C 391 (Moffett & Reynolds 1994). Here we present high-resolution images of total intensity, polarization, and spectral index of W49B. In large-scale morphology it is basically a box-shaped remnant expanding into an apparently inhomogeneous medium, but we also find small-scale structures, arcs and filaments, which lie interior to the outer shell in projection. The actual spatial position of the filaments is unknown, though we suspect that they are in the remnant interior rather than on the front or back face of the blast wave. In addition, their distribution in two dimensions suggests the projection of a helical structure. The shell edge, sharply rising in brightness for at least 3/4 of its circumference, still remains unresolved at our highest resolution (4 sec). This for our assumed distance of 8 kpc, the width of the region in which the emission appears is less than 0.16 pc, indicating short mean free paths for shock-accelerated electrons and high levels of MHD turbulence presumably causing the scattering. We find no polarized flux at 90 or 20 cm, with 3 sigma upper limits in polarized intensity of 36 mJy at 90 cm (45 sec resolution) and 7.2 mJy at 20 cm (5 sec resolution), or 22 micro-Jy/sq arcsec and 370 micro-jy/sq arcsec, respectively, for any emission extended on those scales. Polarized flux is present at 6 cm, but at a very low mean polarized fraction (total polarized flux divided by total flux) of 0.44% +/- 0.06%, which, as for 3C 391, is much lower than typical for bright SNRs at this frequency. The morphology in polarized intensity is poorly correlated with that in total intensity. We see excursions in the polarized fraction up to at least 10% in a few locations, but even where polarization is seen, typical levels are a few percent. Tangled or disordered magnetic fields in the emitting region of the radio shell may be responsible for depolarizing the radio synchrotron radiation, but some form of internal Faraday depolarization may also occur. We estimate the foreground Faraday rotation measure to be about -450 rad/sq m, similar to that found for 3C 391, which is also the Galactic plane and just about as distant. Spectral index images created from the total intensity images show that the spectral index across W49B is constant to within about Delta alpha approximately 0.1 in bright regions. This result weakly supports a common origin of the radio-emitting electrons, as in the blast wave, rather than in inhomogeneous turbulent regions of differing properties due to the stochastic (second-order Fermi) acceleration process. Variations at the level of Delta alpha approximately 0.1 are seen, but their significance is doubtful. New observations at 90 cm, using experimental three-dimensional imaging technology, may improve on this limit.

Moffett, David A.↗
NASA NTRS1978

An experimental map of the internal structure of a vortex breakdown

The flow field of an 'axisymmetric' vortex breakdown has been mapped using a laser-Doppler anemometer. The interior of the recirculation zone is dominated by energetic, non-axisymmetric, low frequency periodic fluctuations. Spectra for a number of points inside this zone, as well as time-averaged swirl and axial velocity profiles both inside and outside the recirculation zone, have been obtained. The time-averaged streamlines in the interior show an unexpected two-celled structure attributed to the action of the fluctuations. Although the present experiment deals with one particular breakdown, flow-visualization studies indicate that the case examined is typical of the 'axisymmetric' form of breakdown over a range of flow conditions.

Faler, J. H.↗
DOE OSTI2024

Different structural behavior of MgSiO 3 and CaSiO 3 glasses at high pressures

Knowledge of the structural behavior of silicate melts and/or glasses at high pressures provides fundamental information for discussing the nature and properties of silicate magmas in the Earth’s interior. The behavior of Si-O structures under high-pressure conditions has been widely studied, while the effect of cation atoms on the high-pressure structural behavior of silicate melts or glasses has not been well investigated. Here, in this study, we investigated the structures of MgSiO 3 and CaSiO 3 glasses up to 5.4 GPa by in situ X-ray pair distribution function measurements to understand the effect of different cations (Mg 2+ and Ca 2+ ) on high-pressure structural behavior of silicate glasses. We found that the structural behavior of MgSiO 3 and CaSiO 3 glasses are different at high pressures. The structure of MgSiO 3 glass changes by shrinking of Si-O-Si angle with increasing pressures, which is consistent with previous studies for SiO 2 and MgSiO 3 glasses. On the other hand, CaSiO 3 glass shows almost no change in Si-Si distance at high pressures, while the intensities of two peaks at ~3.0 and ~3.5 Å change with increasing pressure. The structural change in CaSiO 3 glass at high pressure is interpreted as the change in the fraction of the edge-shared and corner-shared CaO 6 -SiO 4 structures. The different high-pressure structural behavior observed in MgSiO 3 and CaSiO 3 glasses may be the origin of differences in properties, such as viscosity between MgSiO 3 and CaSiO 3 melts at high pressures. This signifies the importance of different structural behaviors due to different cations in investigations of the nature and properties of silicate magmas in Earth’s interior.

36 MATERIALS SCIENCE↗
NASA NTRS1997

Quelling Cabin Noise in Turboprop Aircraft via Active Control

Cabin noise in turboprop aircraft causes passenger discomfort, airframe fatigue, and employee scheduling constraints due to OSHA standards for exposure to high levels of noise. The noise levels in the cabins of turboprop aircraft are typically 10 to 30 decibels louder than commercial jet noise levels. However. unlike jet noise the turboprop noise spectrum is dominated by a few low frequency tones. Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The goal is to determine the force inputs and locations for the piezoceramic actuators so that: (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. Computational experiments for data taken from a computer generated model and from a laboratory test article at NASA Langley Research Center are provided.

Kincaid, Rex K.↗
NASA NTRS1995

Actuator placement for active sound and vibration control of cylinders

Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The cylinder is excited by an exterior noise source -- an acoustic monopole -- located near the outside of the cylinder wall. The goal is to determine the force inputs and sites for the piezoelectric actuators so that (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. We studied external monopole excitations at two frequencies. A cylinder resonance of 100 Hz, where the interior acoustic field is driven in multiple, off-resonance cylinder cavity modes, and a cylinder resonance of 200 Hz are characterized by both near and off-resonance cylinder vibration modes which couple effectively with a single, dominant, low-order acoustic cavity mode at resonance. Previous work has focused almost exclusively on meeting objective (1) and solving a complex least-squares problem to arrive at an optimal force vector for a given set of actuator sites. In addition, it has been noted that when the cavity mode couples with cylinder vibration modes (our 200 Hz case) control spillover may occur in higher order cylinder shell vibrational modes. How to determine the best set of actuator sites to meet objectives (1)-(3) is the main contribution of our research effort. The selection of the best set of actuator sites from a set of potential sites is done via two metaheuristics -- simulated annealing and tabu search. Each of these metaheuristics partitions the set of potential actuator sites into two disjoint sets: those that are selected to control the noise (on) and those that are not (off). Next, each metaheuristic attempts to improve this initial solution by calculating the change in the objective value when one selected actuator site is turned off and one actuator site that previously was not selected is turned on. All such pairwise exchanges are performed and the exchange that improves the objective the most is made. Eventually the search is unable to improve the objective value and a local optimum (with respect to pairwise exchanges) is reached. Both simulated annealing and tabu search provide mechanisms to escape local optima and allow the search to continue until (hopefully) a global optimum is found. Our experiments with the 100 Hz and 200 Hz cases confirm that both metaheuristics are able to uncover better solutions than those selected based upon engineering judgement alone. In addition, the high quality solutions generated by these metaheuristics, when minimizing interior noise, do not further excite the cylinder shell. Thus, we are able to meet objective (2) without imposing an additional constraint or forming a multiobjective performance measure. An additional observation is that in many cases the amplitude and phase values for several chosen actuator sites were nearly identical. This natural grouping means that fewer control channels are needed and the resulting control system is simpler. Currently no power requirements have been set, so objective (3) cannot be addressed. A set of experiments is planned with a laboratory test article (a cylinder). For these experiments the transfer matrices will be generated experimentally. It is hoped that the predicted performance of the best actuator sites found by our metaheuristics will correlate well with the measured performance.

Kincaid, Rex K.↗