Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Interlayer gap widened $α$-phase molybdenum trioxide as high-rate anodes for dual-ion-intercalation energy storage devices

Employing high-rate ion-intercalation electrodes represents a feasible way to mitigate the inherent trade-off between energy density and power density for electrochemical energy storage devices, but efficient approaches to boost the charge-storage kinetics of electrodes are still needed. Here, we demonstrate a water-incorporation strategy to expand the interlayer gap of α-MoO 3 , in which water molecules take the place of lattice oxygen of α-MoO 3 . Accordingly, the modified α-MoO 3 electrode exhibits theoretical-value-close specific capacity (963 C g –1 at 0.1 mV s –1 ), greatly improved rate capability (from 4.4% to 40.2% at 100 mV s –1 ) and boosted cycling stability (from 21 to 71% over 600 cycles). A fast-kinetics dual-ion-intercalation energy storage device is further assembled by combining the modified α-MoO 3 anode with an anion-intercalation graphite cathode, operating well over a wide discharge rate range. Our study sheds light on a promising design strategy of layered materials for high-kinetics charge storage.

25 ENERGY STORAGE↗

Localized interlayer excitons in MoSe 2 –WSe 2 heterostructures without a moiré potential

Interlayer excitons (IXs) in MoSe 2 –WSe 2 heterobilayers have generated interest as highly tunable light emitters in transition metal dichalcogenide (TMD) heterostructures. Previous reports of spectrally narrow (<1 meV) photoluminescence (PL) emission lines at low temperature have been attributed to IXs localized by the moiré potential between the TMD layers. We show that spectrally narrow IX PL lines are present even when the moiré potential is suppressed by inserting a bilayer hexagonal boron nitride (hBN) spacer between the TMD layers. We compare the doping, electric field, magnetic field, and temperature dependence of IXs in a directly contacted MoSe 2 –WSe 2 region to those in a region separated by bilayer hBN. The doping, electric field, and temperature dependence of the narrow IX lines are similar for both regions, but their excitonic g-factors have opposite signs, indicating that the origin of narrow IX PL is not the moiré potential.

36 MATERIALS SCIENCE↗

Densification of the interlayer spacing governs the nanomechanical properties of calcium-silicate-hydrate

Calciuam-silicate-hydrate (C-S-H) is the principal binding phase in modern concrete. Molecular simulations imply that its nanoscale stiffness is 'defect-driven', i.e., dominated by crystallographic defects such as bridging site vacancies in its silicate chains. However, experimental validation of this result is difficult due to the hierarchically porous nature of C-S-H down to nanometers. Here in this paper, we integrate high pressure X-ray diffraction and atomistic simulations to correlate the anisotropic deformation of nanocrystalline C-S-H to its atomic-scale structure, which is changed by varying the Ca-To-Si molar ratio. Contrary to the 'defect-driven' hypothesis, we clearly observe stiffening of C-S-H with increasing Ca/Si in the range 0.8 ≤ Ca/Si ≤ 1.3, despite increasing numbers of vacancies in its silicate chains. The deformation of these chains along the b-Axis occurs mainly through tilting of the Si-O-Si dihedral angle rather than shortening of the Si-O bond, and consequently there is no correlation between the incompressibilities of the a-and b-Axes and the Ca/Si. On the contrary, the intrinsic stiffness of C-S-H solid is inversely correlated with the thickness of its interlayer space. This work provides direct experimental evidence to conduct more realistic modelling of C-S-H-based cementitious material.

36 MATERIALS SCIENCE↗

Field-free Magnetization Switching by Utilizing the Spin Hall Effect and Interlayer Exchange Coupling of Iridium

Magnetization switching by spin-orbit torque (SOT) via spin Hall effect represents as a competitive alternative to that by spin-transfer torque (STT) used for magnetoresistive random access memory (MRAM), as it doesn’t require high-density current to go through the tunnel junction. For perpendicular MRAM, however, SOT driven switching of the free layer requires an external in-plane field, which poses limitation for viability in practical applications. Here we demonstrate field-free magnetization switching of a perpendicular magnet by utilizing an Iridium (Ir) layer. The Ir layer not only provides SOTs via spin Hall effect, but also induce interlayer exchange coupling with an in-plane magnetic layer that eliminates the need for the external field. Such dual functions of the Ir layer allows future build-up of magnetoresistive stacks for memory and logic applications. Experimental observations show that the SOT driven field-free magnetization reversal is characterized as domain nucleation and expansion. Micromagnetic modeling is carried out to provide in-depth understanding of the perpendicular magnetization reversal process in the presence of an in-plane exchange coupling field.

Science & Technology - Other Topics↗

Magnetic-field-induced Wigner crystallization of charged interlayer excitons in van der Waals heterostructures

Abstract Ever since its inception, coherent excited states of semiconductors have been the focus of semiconductor materials research to evolve into a vibrant field of low-dimensional solid-state physics. The field is gaining new momentum these days due to emerging transdimensional semiconductors such as van der Waals bound layers of transition metal dichalcogenides (TMDs) of controlled thickness. Here, we develop the theory of magnetic-field-induced Wigner crystallization for charged interlayer excitons (CIE) discovered recently in TMD heterobilayers. We derive the ratio of the potential interaction energy to the kinetic energy for the many-particle CIE system in the perpendicular magnetostatic field of an arbitrary strength and predict the crystallization effect in the strong field regime. We show that magnetic-field-induced Wigner crystallization and melting of CIEs can be observed in magneto-photoluminescence experiments with TMD bilayers of systematically varied electron-hole doping concentrations. Our results advance the capabilities of this new generation of transdimensional quantum materials.

36 MATERIALS SCIENCE↗

Hydrogen weakens interlayer bonding in layered transition metal sulfide Fe 1+x S

The presence of interlaminar interstitial defects like hydrogen affects the mechanical properties of van der Waals-bonded layered materials such as transition metal chalcogenides. While the embrittling effect of hydrogen is well understood in metals, the impact of hydrogen defects on the mechanical behavior of layered chalcogenides remained unexplored. In this article, we use density functional calculations to reveal the influence of different hydrogen point defects on important mechanical metrics, including binding energies, elastic moduli and tensile and shear strengths of a prototypical ionic layered material, mackinawite, Fe1+xS. We find that one of the low-energy hydrogen defect structures, interlaminar molecular H2 interstitials, severely degrades the strength of inter-layer van der Waals interactions in the mackinawite crystal. This leads to a significant (over 80%) degradation in the mechanical properties of the mackinawite crystal and enables facile interlayer sliding and exfoliation. This finding suggests the mechanisms for cathodic exfoliation of transition metal chalcogenides like Fe1+xS, and presents a plausible mechanism for the poor protectiveness of layered passive films like mackinawite that undergo failure by spalling or delamination.

Krishnamoorthy, Aravind↗

Transforming waste newspapers into nitrogen-doped conducting interlayers for advanced Li–S batteries

In this study, nitrogen-doped conducting (NC) interlayers, derived from waste newspapers, are inserted between a sulfur cathode and a separator to enhance the electrochemical performances of lithium–sulfur (Li–S) batteries. A simple strategy transforms wastes into valuable polysulfide trappers that improve the active-material utilization to 77% and accomplish good cycling stability in Li–S batteries.

25 ENERGY STORAGE↗

Fundamental insights about interlayer cation migration in Li-ion electrodes at high states of charge

We present that one approach to increasing the capacity of Li-ion batteries is to expand the usable voltage range over which the battery is cycled by charging the cathode to higher voltages. Layered intercalation compounds commonly used as cathodes in Li-ion batteries, however, can become susceptible to irreversible structural changes at high states of charge due to cation migration to the emptied Li layers. Here we report on the discovery of a strong correlation between the position of the Fermi level and the energy barrier for cation migration to the Li layers of fully charged layered intercalation compounds. Since the identity of the transition metal strongly influences the Fermi level, this discovery suggests that cation migration can be suppressed at high states of charge using targeted alloying strategies. First-principles calculations indicate that an increase in the concentration of Ni relative to Co or Mn should reduce, or even impede, interlayer migration in layered oxides. Lastly, the insights of this study pave the way for the discovery of layered intercalation compounds that can approach their theoretical capacities in practice.

36 MATERIALS SCIENCE↗

Layer-by-layer growth of graphene oxide multilayers using robust interlayer linking chemistry. 2 Zr–bissulfates

We report on the facile layer-by-layer growth of graphene oxide sulfate (GO-S) multilayer structures. The layers are bonded to a modified planar silica support using Zr 4+ ions. Optical ellipsometry shows step-by-step layer growth with layer thickness consistent with that expected from molecular mechanics calculations. The reaction to form Zr–bissulfate linkages is facile, with multistep layer deposition occurring within six to ten minutes per layer. The GO-S layers can be deposited directly on GO-S underlayer(s) or interlayer spacers can be incorporated to control the spacing with GO-S layers. X-ray photoelectron spectroscopy (XPS) data provides information on the density of the sulfonated groups present at the graphene oxide surface and on the Zr : S ratio. This is the first report we are aware of that demonstrates robust layer-by-layer growth of graphene oxide structures.

Graphene oxide↗

An ultrathin Zr(Ge) alloy film as an exhaustion interlayer combined with Cu(Zr) seed layer for the Cu/porous SiOC:H dielectric integration

A highly reliable interface of an ultrathin Zr(Ge) exhaustion interlayer between Cu(Zr) film and porous SiOC:H (p-SiOC:H) dielectric has been developed in the present work. After being processed at a moderate elevated temperature (say, 450 deg. C), a self-formed nanomultilayer of CuGe{sub x}/ZrO{sub x}(ZrSi{sub y}O{sub x}) was produced at the interface of Cu(Zr)/p-SiOC:H film stacks, which showed strong ability to effectively hinder Cu atoms diffusion into p-SiOC:H film and free Si atoms diffusion into Cu film. The mechanism involving the thermal stability of the films system is analyzed based on detailed characterization studies.

36 MATERIALS SCIENCE↗

Interlayer thickness dependence of 90 deg. exchange coupling in Co{sub 2}MnAl/Cr/Co{sub 2}MnAl epitaxial trilayer structures

The spacer layer thickness dependence of interlayer exchange coupling has been investigated in the fully epitaxial trilayers of the Co{sub 2}MnAl (CMA)/Cr/CMA structure. A series of high-quality samples of CMA (20 nm)/Cr (t{sub Cr}=0.3-8.1 nm)/CMA (10 nm) trilayers was prepared on a MgO substrate by ultrahigh vacuum compatible dc sputtering. Comparison of the results of the experiments and the simulations of magnetization curves revealed novel behavior, dominating the 90 deg. coupling and the absence of 180 deg. coupling. No clear oscillation, only a peak of the 90 deg. coupling strength (J{sub 2}{approx}-0.68 erg/cm{sup 2}), was observed at t{sub Cr}=1.2 nm.

36 MATERIALS SCIENCE↗

Growth of AlGaN/GaN heterojunction field effect transistors on semi-insulating GaN using an AlGaN interlayer

Semi-insulating (SI) GaN layers were grown on 4H-SiC substrates by inserting an AlGaN layer between the AlN buffer and the GaN layer. Secondary ion mass spectroscopy measurements showed that the AlGaN layer prevented Si from diffusing from the substrate into the GaN layer. X-ray diffraction and atomic force microscopy analyses showed that an optimized AlGaN interlayer does not degrade the crystal quality or surface morphology of the SI GaN. The room temperature mobility of an AlGaN/GaN heterostructure using this SI GaN was 2200 cm{sup 2}/V s. High electron mobility transistors (HEMTs) with 0.65 {mu}m long gates were also fabricated on these SI GaN buffers. A power density of 19.0 W/mm with a power added efficiency of 48% was demonstrated at 10 GHz at a drain bias of 78 V. These HEMTs also exhibited sharp pinch off, low leakage, and negligible dispersion.

36 MATERIALS SCIENCE↗

Quantifying interlayer exchange coupling via layer-resolved hysteresis loops in antiferromagnetically coupled manganite/nickelate superlattices.

In superlattices made of a half metallic ferromagnet La{sub 2/3}Ba{sub 1/3}MnO{sub 3}(LBMO) and a metallic paramagnet LaNiO{sub 3}(LNO), the field dependence of the LBMO magnetization was studied using depth- and element-sensitive x-ray resonant magnetic scattering measurements. The superlattices have ten bilayers of LBMO and LNO, and the LBMO layers were antiferromagnetically coupled across LNO spacer layers. From the x-ray measurements, the magnetic hysteresis loop of each LBMO layer was obtained, and subsequently the obtained layer-resolved LBMO hysteresis loops were utilized to determine the interlayer exchange coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarity inversion of N-face GaN using an aluminum oxide interlayer

The polarity of GaN grown by plasma-assisted molecular beam epitaxy was inverted from N-face to Ga-face by inserting a composite AlN/aluminum oxide (AlO{sub x}) interlayer structure at the inversion interface. The change in polarity was verified in situ by reflection high energy electron diffraction via intensity transients and postgrowth surface reconstructions, and ex situ by convergent beam electron diffraction and etch studies in an aqueous potassium hydroxide solution. The inverted materials showed smooth surfaces and good electrical properties. AlGaN/GaN high electron mobility transistors fabricated on the inverted epilayers showed good dc and high frequency performance. A current-gain cutoff frequency (f{sub T}) of 21 GHz and maximum oscillation frequency (f{sub max}) of 61 GHz were measured in devices with a gate length of 0.7 {mu}m. These data compare favorably to those of Ga-face AlGaN/GaN devices with a similar structure grown on Si-face SiC substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗