SEARCH · Search NASA

Results for “isotope effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Rb-Sr, Sm-Nd, K-Ca, O, and H isotopic study of Cretaceous-Tertiary boundary sediments, Caravaca, Spain Evidence for an oceanic impact site

The results of isotopic and trace-element-abundance analyses of Ir-enriched Cretaceous-Tertiary-boundary clay sediments from Caravaca, Spain, and of adjacent carbonate and marl layers, are presented. Acetic-acid and HCl leachates and residues were analyzed by isotope dilution to determine K, Rb, Sr, Sm, and Nd concentrations and Sr-87/Sr-86 and Nd-143/Nd-144 ratios. The stable isotope ratios delta-D, delta-(C-13), and delta-(0-18) were also determined. The results are presented in tables and graphs and compared with published data on the Caravaca sediments and on samples from other locations. The boundary clay is found to be distinguished from the adjacent layers by its isotopic ratios and to be of mainly terrestrial, lithospheric (deeper than 3-km) origin. Although submarine-weathering effects are evident and difficult to quantify, the degree of variation in Ni, Ir, Sr, and REE concentrations is considered too large to be attributed to postdepositional processes alone. These findings are seen as evidence for the ocean impact of a large single asteroid producing a worldwide blanket of ejecta, a large injection of water vapor into the atmosphere, and perhaps a gigantic tsunami, at the end of the Cretaceous period.

Depaolo, D. J.↗

NASA NTRS1987

Comment on 'Heavy ozone in the stratosphere'

It is suggested that the factor-of-two difference in ozone formation rate constants derived by Bates (1986) can also be explained by the omission of standard correction factors from the rate expression. Proper accounting for the fact that isotope exchange and recombination reactions share a common energized collision complex (which can decay by dissociation to products isotopically distinct from the original reactants) eliminates the anomalous dependence of the rate constant on the isotopic composition of the reactants and products through their symmetry numbers. In a reply, Bates argues that symmetry effects in association do not lead to enhancement of the total heavy ozone abundance.

Anderson, Stuart M.↗

NASA NTRS2012

Comparing the Performance of Hyperbolic and Circular Rod Quadrupole Mass Spectrometers with Applied Higher Order Auxiliary Excitation

This work applies higher order auxiliary excitation techniques to two types of quadrupole mass spectrometers (QMSs): commercial systems and spaceborne instruments. The operational settings of a circular rod geometry commercial system and an engineering test-bed for a hyperbolic rod geometry spaceborne instrument were matched, with the relative performance of each sensor characterized with and without applied excitation using isotopic measurements of Kr+. Each instrument was operated at the limit of the test electronics to determine the effect of auxiliary excitation on extending instrument capabilities. For the circular rod sensor, with applied excitation, a doubling of the mass resolution at 1% of peak transmission resulted from the elimination of the low-mass side peak tail typical of such rod geometries. The mass peak stability and ion rejection efficiency were also increased by factors of 2 and 10, respectively, with voltage scan lines passing through the center of stability islands formed from auxiliary excitation. Auxiliary excitation also resulted in factors of 6 and 2 in peak stability and ion rejection efficiency, respectively, for the hyperbolic rod sensor. These results not only have significant implications for the use of circular rod quadrupoles with applied excitation as a suitable replacement for traditional hyperbolic rod sensors, but also for extending the capabilities of existing hyperbolic rod QMSs for the next generation of spaceborne instruments and low-mass commercial systems.

Gershman, D. J.↗

NASA NTRS2012

Comparing the Performance of Hyperbolic and Circular Rod Quadrupole Mass Spectrometers with Applied Higher Order Auxiliary Excitation

auxiliary excitation↗

NASA NTRS2017

Microstructural Constraints on the Formation History of Hibonite in Refractory Inclusions

Hibonite is a primary refractory phase occurring in many Ca-Al-rich inclusions (CAIs), typically with spinel and perovskite [1]. Previous mi-crostructural studies of hibonite in CAIs revealed the presence of numerous stacking defects along the (001) plane and correlated non-stoichiometry in hibonite [2,3]. These features are interpreted as complex inter-growths of stoichiometric and Ca-deficient hibonites, as shown by experimental studies of reaction-sintered CaO-Al2O3 compounds [4]. Here, we extend our transmission electron microscope (TEM) studies to hibonite-bearing CAIs in CM chondrites that have been well characterized isotopically [5-7]. In addition, we have undertaken a series of anneal-ing experiments to explore the effect of minor elements (Mg and Ti) on the microstucure of hibonite [8,9,this study]. The results of these experiments are being applied to hibonite in CAIs in order to better understand its formation conditions.

Han, J.↗

NASA NTRS1985

A spectacular nitrogen isotope anomaly in Bencubbin

Results of isotopic measurements on an unusual stony-iron meteorite named Bencubbin, which was found in Western Australia in 1930, are reported. Nitrogen from both the metallic and stony parts of the Bencubbin meteorite was analyzed, and in both materials large excesses of (15)N were found, resulting in values of the (14)N/(15)N abundance ratios as low as 137. That is, (15)N is enriched in Bencubbin by about a factor of two relative to terrestrial nitrogen. This is the largest (15)N enrichment of any known natural material. The effect is so large that chemical processes are probably inadequate to account for it. Nuclear processes which may be responsible for the anomalous isotope abundance are discussed.

Prombo, C. A.↗

NASA NTRS2012

Using Natural Stable Calcium Isotopes to Rapidly Assess Changes in Bone Mineral Balance Using a Bed Rest Model to Induce Bone Loss

Metabolic bone diseases like osteoporosis result from the disruption of normal bone mineral balance (BMB) resulting in bone loss. During spaceflight astronauts lose substantial bone. Bed rest provides an analog to simulate some of the effects of spaceflight; including bone and calcium loss and provides the opportunity to evaluate new methods to monitor BMB in healthy individuals undergoing environmentally induced-bone loss. Previous research showed that natural variations in the Ca isotope ratio occur because bone formation depletes soft tissue of light Ca isotopes while bone resorption releases that isotopically light Ca back into soft tissue (Skulan et al, 2007). Using a bed rest model, we demonstrate that the Ca isotope ratio of urine shifts in a direction consistent with bone loss after just 7 days of bed rest, long before detectable changes in bone mineral density (BMD) occur. The Ca isotope variations tracks changes observed in urinary N-teleopeptide, a bone resorption biomarker. Bone specific alkaline phosphatase, a bone formation biomarker, is unchanged. The established relationship between Ca isotopes and BMB can be used to quantitatively translate the changes in the Ca isotope ratio to changes in BMD using a simple mathematical model. This model predicts that subjects lost 0.25 0.07% ( SD) of their bone mass from day 7 to day 30 of bed rest. Given the rapid signal observed using Ca isotope measurements and the potential to quantitatively assess bone loss; this technique is well suited to study the short-term dynamics of bone metabolism.

Morgan, J. L. L.↗

NASA NTRS2017

Volatile Concentrations and H-Isotope Composition of Unequilibrated Eucrites

Eucrites are among the oldest and best studied asteroidal basalts (1). They represent magmatism that occurred on their parent asteroid, likely 4-Vesta, starting at ~ 4563 Ma and continuing for approx. 30 Myr. Two hypotheses are debated for the genesis of eucrites, a magma ocean model (2), and a mantle partial melting model. In general, volatiles (H, C, F, Cl) have been ignored for eucrites and 4-Vesta, but solubility of wt% levels of H2O are possible at Vestan interior PT conditions. Targeted measurements on samples could aid our understanding considerably. Recent studies have found evidence of volatile elements in eucrites, but quantifying the abundance of volatiles remains problematic (6). Volatile elements have a disproportionately large effect on melt properties and phase stability, relative to their low abundance. The source of volatile elements can be elucidated by examining the hydrogen isotope ratio (D/H), as different H reservoirs have drastically different H isotope compositions. Recent studies of apatite in eucrites have shown that the D/H of 4-Vesta matches that of Earth and carbonaceous chondrites, however, the D/H of apatites may not represent the D/H of a primitive 4-Vesta melt due to the possibility of degassing prior to the crystallization of apatite. Therefore, the D/H of early crystallizing phases must be measured to determine if the D/H of 4-Vesta is equal to that of the Earth and carbonaceous chondrites.

Sarafian, Adam R.↗

NASA NTRS2002

Potential Operating Orbits for Fission Electric Propulsion Systems Driven by the SAFE-400

Safety must be ensured during all phases of space fission system design, development, fabrication, launch, operation, and shutdown. One potential space fission system application is fission electric propulsion (FEP), in which fission energy is converted into electricity and used to power high efficiency (Isp greater than 3000s) electric thrusters. For these types of systems it is important to determine which operational scenarios ensure safety while allowing maximum mission performance and flexibility. Space fission systems are essentially nonradioactive at launch, prior to extended operation at high power. Once high power operation begins, system radiological inventory steadily increases as fission products build up. For a given fission product isotope, the maximum radiological inventory is typically achieved once the system has operated for a length of time equivalent to several half-lives. After that time, the isotope decays at the same rate it is produced, and no further inventory builds in. For an FEP mission beginning in Earth orbit, altitude and orbital lifetime increase as the propulsion system operates. Two simultaneous effects of fission propulsion system operation are thus (1) increasing fission product inventory and (2) increasing orbital lifetime. Phrased differently, as fission products build up, more time is required for the fission products to naturally convert back into non-radioactive isotopes. Simultaneously, as fission products build up, orbital lifetime increases, providing more time for the fission products to naturally convert back into non-radioactive isotopes. Operational constraints required to ensure safety can thus be quantified.

Houts, Mike↗

NASA NTRS2002

Potential Operating Orbits for the SAFE-400

Safety must be ensured during all phases of space fission system design, development, fabrication, launch, operation, and shutdown. One potential space fission system application is fission electric propulsion (FEP), in which fission energy is converted into electricity and used to power high efficiency (Isp is greater than 3000s) electric thrusters. For these types of systems it is important to determine which operational scenarios ensure safety while allowing maximum mission performance and flexibility. Space fission systems are essentially non-radioactive at launch, prior to extended operation at high power. Once high power operation begins, system radiological inventory steadily increases as fission products build up. For a given fission product isotope, the maximum radiological inventory is typically achieved once the system has operated for a length of time equivalent to several half-lives. After that time, the isotope decays at the same rate it is produced, and no further inventory builds in. For an FEP mission beginning in Earth orbit, altitude and orbital lifetime increase as the propulsion system operates. Two simultaneous effects of fission propulsion system operation are thus (1) increasing fission product inventory and (2) increasing orbital lifetime. Phrased differently, as fission products build up, more time is required for the fission products to naturally convert back into non-radioactive isotopes. Simultaneously, as fission products build up, orbital lifetime increases, providing more time for the fission products to naturally convert back into non-radioactive isotopes. Operational constraints required to ensure safety can thus be quantified.

Houts, Mike↗

NASA NTRS1980

DIAL with heterodyne detection including speckle noise: Aircraft/shuttle measurements of O3, H2O, and NH3 with pulsed tunable CO2lasers

A parametric analysis of DIAL sensitivity with heterodyne detection is presented and comparisons with direct detection are discussed. Examples are given for monitoring vertical distributions of O3, H2O, and NH3 using a ground-, aircraft-, or shuttle-based pulsed tunable CO2 laser DIAL system. Results indicate that maximum sensitivity at minimum laser energy per measurement requires multiple pulse operation with the energy per pulse selected so that the measured photon rate is approximately equal to the detector IF bandwidth. Measurement sensitivities can be maximized and interference effects minimized by fine adjustment of measurement frequencies using the tunability of high pressure lasers. The use of rare isotope lasers minimizes loss due to CO2 atmospheric absorption.

Brockman, P.↗

NASA NTRS1980

The origin of the 'FUN' anomalies and the high temperature inclusions in the Allende meteorite

The discovery of isotopic anomalies in white inclusions of the meteorite Allende has led to fundamental questions concerning the origin of these anomalies and of the white inclusions themselves. An analysis of the 'FUN' anomalies in the inclusions C1 and EK1-4-1 demonstrates that these isotopic anomalies may be decomposed into individual nucleosynthetic components, which have been subjected to separate mass and component fractionations. There is no evidence that any freshly-synthesized material injected into the primitive solar nebula was of abnormal isotopic composition, or that the FUN anomalies were due to an injection of unusual material. Rather, they show the effects of large mass fractionations and an unusual mixture of normal nucleosynthetic material, likely to be in the form of interstellar grains whose size or chemistry served as a memory for the nucleosynthetic origins of their constituent atoms. Giant gaseous protoplanets, as described for the early solar nebula by Cameron (1978), are a potential site for achieving both mass and component fractionations, and for producing white inclusions in general.

Consolmagno, G. J.↗

NASA NTRS1994

Comparison of the LEW88516 and ALHA77005 martian meteorites: Similar but distinct

By mineral and bulk compositions, the Lewis Cliff (LEW) 88516 meteorite is quite similar to the ALHA77005 martian meteorite. These two meteorites are not paired because their mineral compositions are distinct, they were found 500 km apart in ice fields with different sources for meteorites, and their terrestrial residence ages are different. Minerals in LEW88516 include: olivine, pyroxenes (low- and high-Ca), and maskelynite (ater plagioclase); and the minor minerals chromite, whitlockite, ilmenite, and pyrrhotite. Mineral grains in LEW88516 range up to a few mm. Texturally, the meteorite is complex, with regions of olivine and chromite poikilitically enclosed in pyroxene, regions of interstitial basaltic texture, and glass-rich (shock) veinlets. Olivine compositions range from Fo(sub 64) to Fo(sub 70), (avg. Fo(sub 67)), more ferroan and with more variation than in ALHA77005 (Fo(sub 69) to Fo(sub 73)). Pyroxene compositions fall between En(sub 77)Wo(sub 4) and En(sub 65)Wo(sub 15) and in clusters near En(sub 63)Wo(sub 9) and En(sub 53)Wo(sub 33), on average more magnesian and with more variation than in ALHA77005. Shock features in LEW88516 range from weak deformation through complete melting. Bulk chemical analyses by modal recombination of electron microprobe analyses, instrumental neutron activation, and radiochemical neutron activation confirm that LEW88516 is more closely related to ALHA77005 than to other known martian meteorites. Key element abundance ratios are typical of martian meteorites, as is it nonchondritic rare earth pattern. Differences between the chemical compositions of LEW88516 and ALHA77005 are consistent with slight differences in the proportions of their constituent minerals and not from fundamental petrogenetic differences. Noble gas abundances in LEW88516, like those in ALHA77005, show modest excesses of Ar-40 and Xe-129 from trapped (shock-implanted) gas. As with other ALHA77005 and the shergottite martian meteorites (except EETA79001), noble gas isotope abundances in LEW88516 are consistent with exposure to cosmic rays for 2.5-3 Ma. The absence of substantial effects of shielding from cosmic rays suggest LEW88516 spent this time as an object no larger than a few cm in diameter.

Treiman, A. H.↗

NASA NTRS2004

Lunar and Planetary Science XXXV: Carbonaceous Chondrites

The titles in this section include: 1) A Quantitative NMR Analysis of Phosphorus in Carbonaceous and Ordinary Chondrites; 2) An Infrared Study of the Matrices of CI1 and CM2 Chondrites; 3) A Study of the Morphology, Composition and Mineral Associations of Fe-Ni Sulphides in CM Carbonaceous Chondrites; 4) Aqueous Alteration Mineralogy in CM Carbonaceous Chondrites; 5) In Situ Location and Characterization of Carbon-bearing Phases in Carbonaceous; 6) Chondrites: Insights from Yamato 791198, a Weakly-altered CM2 Chondrite; 7) Unique Texture in EET 83389: Clues to Formation of Fine Grained Rims in CM Chondrites; 8) Amoeboid Olivine Aggregates in the NWA 760 CV3 Chondrite; 9) Petrologic Type of CV3 Chondrites as Revealed by Raman Spectroscopy of Organic Matter; 10) A First Look at Acfer 324: Evidence for Another CR 3 Chondrite? 11) Hydrogen Isotopic Composition of the Bencubbin Meteorite; 12) The Fountain Hills Meteorite: A New CBa Chondrite from Arizona; 13) Shock Effects in the Metal-rich Chondrites QUE 94411, Hammadah al Hamra 237 and Bencubbin; 14) Mineralogy and Petrology of Al-rich Objects in the CH Carbonaceous Chondrite North West Africa 739.

Source record↗

NASA NTRS2019

Permeation Rate Equations for Hydrogen and Deuterium in a Palladium-Silver Alloy

Mass transfer of a gas through a selective, solid membrane is an effective method for separation of desired species. This selective permeability is evident in the flow of hydrogen and the isotope deuterium through palladium-silver metal alloy media. In this study, based upon Sieverts’s law and the Arrhenius diffusion equation, an empirical correlation was developed to determine the steady-state permeation rate R, dependence on media temperature T, gas supply pressure p(sub S), and gas backpressure p(sub B) on the lower pressure side. Because of an extensive range of experimental conditions and complete reporting of raw data, the research by Ackerman and Koskinas was used as a source for data allowing empirical equation fitting. Unfortunately, those authors reported best-fit equations that poorly represented their own results. To improve the modeling of the original data and demonstrate the quality of the measurements, the current study develops improved hydrogen and deuterium permeation rate equations: P = 4.22×10(exp −6) A[exp(−704/T)](sq. root p(sub S) − sq. root p(sub B))/t for hydrogen P = 2.12×10(exp −6) A[exp(−468/T )](sq. root p(sub S) − sq. root p(sub B))/t for deuterium for values of cross-sectional area A (sq.cm), medium thickness t (cm), pressure p (psia), and temperature T (Kelvin), giving a permeation rate in mole/minute. These equations model permeation rate data more closely than do several other existing literature sources.

Smith, Phillip J.↗

NASA NTRS1978

The mean mass of the abundant cosmic-ray nuclei from boron to silicon at 1.2 GeV per atomic mass unit

Results are presented for an investigation of cosmic-ray isotopic composition in which a balloon-borne instrument was used to perform an isotopic analysis of the abundant elements from B through Si in the energy range from 1.0 to 1.6 GeV/amu. The technique employed, which depends on the effect of earth's magnetic field on incoming cosmic rays, and reduction of the observational data are described in detail. Mean masses of the elements B, C, N, O, Ne, Mg, and Si are extracted from normalized Cerenkov spectra and evaluated in terms of the 'leaky box' model of galactic propagation and confinement. The implications of the results for cosmic-ray sources are shown to be consistent with the nucleosynthesis of certain isotopes in the cosmic rays in explosive carbon burning under the conditions of peak temperature, density, and neutronization expected in an explosion of a massive highly evolved star. The possibility of alternate interpretations is noted.

Dwyer, R.↗

NASA NTRS1988

The growth of the continental crust: Constraints from radiogenic isotope geochemistry

Most models for evolution of continental crust are expressed in the form of a diagram illustrating the cumulative crustal mass (normalized relative to the present crustal mass) as a function of time. Thus, geochronological data inevitably play a major role in either constructing or testing crustal growth models. For all models, determining the start-time for effective crustal accretion is of vital importance. To this end, the continuing search for, and reliable characterization of, the most ancient crustal rock-units remains a worthy enterprise. Another important role for geochronology and radiogenic isotope geochemistry is to assess the status of major geological events as period either of new crust generation or of reworking of earlier formed continental crust. For age characterization of major geological provinces, using the critieria outined, the mass (or volume) of crust surviving to the present day should be determinable as a function of crust formation age. More recent developments, however, appear to set severe limitations on recycling of crust, at least by the process of sediment subduction. In modeling crustal growth without recycling, valuable constaints on growth rate variations through time can be provided if variations in the average age of the continental crust can be monitored through geological history. The question of the average age of the exposed continental crust was addressed by determining Sm-Nd crustal residence model ages (T-CR) for fine-grained sediment loads of many of the world's major rivers.

Taylor, Paul N.↗

NASA NTRS1986

Calculations of cosmogenic nuclide production rates in the Earth's atmosphere and their inventories

The production rates of cosmogenic isotopes in the Earth's atmosphere and their resulting terrestrial abundances have been calculated, taking into account both geomagnetic and solar-modulatory effects. The local interstellar flux was assumed to be that of Garcia-Munoz, et al. Solar modulation was accounted for using the heliocentric potential model and expressed in terms of the Deep River neutron monitor count rates. The geomagnetic field was presented by vertical cutoffs calculated by Shea and Smart and the non-vertical cutoffs calculated using ANGRI. The local interstellar particle flux was first modulated using the heliocentric potential field. The modulated cosmic-ray fluxes reaching the earth's orbit then interacted with the geomagnetic field as though it were a high-pass filter. The interaction of the cosmic radiation with the Earth's atmosphere was calculated utilizing the Bolztmann transport equation. Spallation cross sections for isotope production were calculated using the formalism of Silberberg and Tsao and other cross sections were taken from standard sources. Inventories were calculated by accounting from the variation in solar modulation and geomagnetic field strength with time. Results for many isotope, including C-14, Be-7 and Be-10 are in generally good agreement with existing data. The C-14 inventory, for instance, amounts to 1.75/sq cm(e)/s, in excellent agreement with direct estimates.

Obrien, K.↗