Search NASA⌕ Search

SEARCH · Search NASA

Results for “large field of view”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

The X-ray Integral Field Unit (X-IFU) for Athena

Athena is designed to implement the Hot and Energetic Universe science theme selected by the European Space Agency for the second large mission of its Cosmic Vision program. The Athena science payload consists of a large aperture high angular resolution X-ray optics (2 m2 at 1 keV) and twelve meters away, two interchangeable focal plane instruments: the X-ray Integral Field Unit (X-IFU) and the Wide Field Imager. The X-IFU is a cryogenic X-ray spectrometer, based on a large array of Transition Edge Sensors (TES), oering 2.5 eV spectral resolution, with approximately 5" pixels, over a field of view of 5' in diameter. In this paper, we present the X-IFU detector and readout electronics principles, some elements of the current design for the focal plane assembly and the cooling chain. We describe the current performance estimates, in terms of spectral resolution, effective area, particle background rejection and count rate capability. Finally, we emphasize on the technology developments necessary to meet the demanding requirements of the X-IFU, both for the sensor, readout electronics and cooling chain.

X-ray↗
NASA NTRSDate not supplied

Simulating Weak Gravitational Lensing in the Roman Space Telescope Using JWST Observed Galaxies

Some of the most perplexing mysteries of our Universe are connected to the energy and mater we have been unable to physically observe. Making up about 95% of the Universe, dark energy and dark mater do not emit, absorb, nor reflect any portion of the electromagnetic spectrum, and their existence is only inferred through their effects on the visible mater. For example, gravitational lensing is a phenomenon that refers to the magnification and shearing induced on light from distant galaxies caused by the gravitational potential of foreground mater. The amount of lensing is directly related to the total amount of mater present, not just the mater that emits light. Weak gravitational lensing, when these distortions are not as noticeable, allows for the entirety of the “cosmic web”, or large-scale structure, to be probed during dark mater searches instead of just the areas we know are dense with mater i.e. galaxy clusters. In order to properly measure weak lensing effects, accurate galaxy shape measurements that can be calibrated with simulations are required. The Nancy Grace Roman Space Telescope is the next upcoming NASA flagship mission. One of its main goals is elucidating the nature of dark mater and dark energy via ultra-wide field UV-NIR imaging surveys. Roman’s view is 100 times that of the Hubble Space Telescope, and we will be primed to measure large-scale structure in the context of weak lensing studies. In this poster, I will present our efforts to simulate JWST observed galaxies through the eyes of Roman. I will detail how we remove the PSF from a JWST NIRCam imaged galaxy, and add Roman filters and detector effects. We report the comparison between JWST and simulated Roman imaging, and place our results in the context of future weak lensing searches with Roman.

Amethyst S. Barnes↗
NASA NTRS1976

Storm-associated variations of equatorially mirroring ring current protons, 1-800 keV, at constant first adiabatic invariant

Explorer 45 observations of ring current protons mirroring near the equator, 1-800 keV, are presented at constant first adiabatic invariant mu throughout the period of the December 17, 1971, geomagnetic storm. The parameter mu is obtained from simultaneous magnetic field and particle observations. Particle deceleration in response to the storm time magnetic field decrease causes ring current measurements viewed at constant energy to underestimate the storm time increase in proton intensities at energies not exceeding 200 keV. This adiabatic deceleration also accounts for the large flux decreases observed at energies above 200 keV during the storm, in contradiction with previous results (Soraas and Davis, 1968) obtained using a model for the storm time magnetic field.

Lyons, L. R.↗
DOE OSTI2022

In-situ imaging of flexure-induced fracture in tape-laminate composites using high-resolution X-ray computed tomography

Here, this study presents development of an in-situ flexure test for imaging progressive inter- and intralaminar fracture in tape-laminate composites using X-ray computed tomography (CT). The intent of this test is to provide detailed experimental observations of ply-level damage that can be used to validate existing, and develop new, progressive damage analysis (PDA) tools. The test consists of a vertically mounted specimen which is flexed using two eccentric compressive loads using an in-situ uniaxial load stage. The flexure specimen contains a starter notch mid-span which promotes initiation of composite failure within the X-ray field of view. Specimens with two different laminate stacking sequences were tested, imaged, analyzed. For a quasi-isotropic laminate with large angle changes between adjacent plies, there was near simultaneous growth of transverse cracks and delaminations below the midplane of the laminate. For a laminate with small angles between adjacent plies, there was extensive formation of transverse crack networks which penetrated the laminate thickness without delamination growth. In addition to imaging fracture, the X-ray CT data from both specimen types were used to quantify the variability in thickness and analyze the local orientation of individual plies. Overall, the proposed test and the image-data analysis methodology provided an important insight into the fracture processes in tape laminates and highlights the inherent ply-level geometrical variabilities that should be accounted for in PDA simulations.

42 ENGINEERING↗
NASA NTRS1975

Calibration source for remote sensors

The source described was developed as a calibration target for the multispectral scanner (MSS) which was flown on the Earth Resources Technology Satellite A (LANDSAT 1). The wavelength region of interest covered the four (4) MSS bands extending from 0.5 to 1.1 micrometers, although the target was calibrated from 0.32 to 2.5 micrometers. The following characteristics for the target were required: (1) large aperture, sufficient to accommodate an instrument with a 9 inch (23 centimeters(cm)) aperture and 2 1/2 deg field of view (fov), (2) highly diffuse energy from target, (3) high spatial uniformity across aperture area of source, (4) spectrally calibrated in absolute units, (5) stable output over long periods of time (1-2 yrs), and (6) rugged, yet portable enough to be easily transported long distances without detrimental effects on the operational capabilities of the target. Two approaches were considered: a thirty (30) inch (76 cm) diameter integrating sphere with a twelve inch (30.5 cm) exit port, or the use of one hemisphere of a 76 cm sphere in conjunction with a Kodak ektolite screen. The screen has the property of reflecting back uniformly into a well defined area the majority of the light received. After some preliminary trials it seemed that the 76 cm sphere would give the most satisfactory results.

Mclean, J. T.↗
NASA NTRS1985

ELF wave production by an electron beam emitting rocket system and its suppression on auroral field lines - Evidence for Alfven and drift waves

Orthogonal probes on a free-flying plasma diagnostics payload are used to study ELF electric disturbances in the auroral ionosphere that are due to the injection of powerful electron beams. Frequency spectrograms are presented for various pitch angles, pulsing characteristics, and other properties of the injected beams; the large scale DC ionospheric convection electric field is measured, together with auroral particle precipitation, visual auroral forms, and ionospheric parameters. In view of the experimental results obtained, it is postulated that the observed ELF waves are in the Alfven and drift modes, and are generated by the positive vehicle potential during beam injection.

Winckler, J. R.↗
NASA NTRS1997

Automated navigation assessment for earth survey sensors using island targets

An automated method has been developed for performing navigation assessment on satellite-based Earth sensor data. The method utilizes islands as targets which can be readily located in the sensor data and identified with reference locations. The essential elements are an algorithm for classifying the sensor data according to source, a reference catalog of island locations, and a robust pattern-matching algorithm for island identification. The algorithms were developed and tested for the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), an ocean color sensor. This method will allow navigation error statistics to be automatically generated for large numbers of points, supporting analysis over large spatial and temporal ranges.

Patt, Frederick S.↗
NASA NTRS1997

An Automated Method for Navigation Assessment for Earth Survey Sensors Using Island Targets

An automated method has been developed for performing navigation assessment on satellite-based Earth sensor data. The method utilizes islands as targets which can be readily located in the sensor data and identified with reference locations. The essential elements are an algorithm for classifying the sensor data according to source, a reference catalogue of island locations, and a robust pattern-matching algorithm for island identification. The algorithms were developed and tested for the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), an ocean colour sensor. This method will allow navigation error statistics to be automatically generated for large numbers of points, supporting analysis over large spatial and temporal ranges.

Patt, F. S.↗
NASA NTRS1998

Scientific Issues Addressed by the Kepler Mission

The Kepler Mission uses a wide field-of-view telescope to photometrically monitor 100,000 main-sequence stars for evidence of planetary transits. Because of the large number of stars monitored and because the mission is designed with a precision (0.002%) sufficient to readily recognize Earth-size planets transiting solar-like stars, several hundred Earth-size planets should be found. Based on the the Dopper velocity observations that find 2% of the main-sequence stars have Jupiter-size planets in short-period orbits, the Kepler mission is also expected to detect about 2000 giant planets. Several questions about the association of planet types and stellar characteristics can be investigated. For example; Are small planets found when Jupiter-mass planets are also present in inner orbits? What is the frequency of small planets compared to Jupiter-mass planets? What is the frequency and distribution of planets intermediate in size and mass to that of Earth and Jupiter? What correlations exist between planet size, distribution, and frequency with the characteristics of the stars they orbit? A comparison between model predictions and observation should be a useful step in evolving better models of planetary system formation and help put the formation of our Solar System in perspective.

Bourcki, W. J.↗
NASA NTRS2005

Magnetospheric Radio Tomography: Observables, Algorithms, and Experimental Analysis

This grant supported research towards developing magnetospheric electron density and magnetic field remote sensing techniques via multistatic radio propagation and tomographic image reconstruction. This work was motivated by the need to better develop the basic technique of magnetospheric radio tomography, which holds substantial promise as a technology uniquely capable of imaging magnetic field and electron density in the magnetosphere on large scales with rapid cadence. Such images would provide an unprecedented and needed view into magnetospheric processes. By highlighting the systems-level interconnectedness of different regions, our understanding of space weather processes and ability to predict them would be dramatically enhanced. Three peer-reviewed publications and 5 conference presentations have resulted from this work, which supported 1 PhD student and 1 postdoctoral researcher. One more paper is in progress and will be submitted shortly. Because the main results of this research have been published or are soon to be published in refereed journal articles listed in the reference section of this document, we provide here an overview of the research and accomplishments without describing all of the details that are contained in the articles.

Cummer, Steven↗
NASA NTRS2016

Background-Oriented Schlieren used in a hypersonic inlet test at NASA GRC

Background Oriented Schlieren (BOS) is a derivative of the classical schlieren technology, which is used to visualize density gradients, such as shock wave structures in a wind tunnel. Changes in refractive index resulting from density gradients cause light rays to bend, resulting in apparent motion of a random background pattern. The apparent motion of the pattern is determined using cross-correlation algorithms (between no-flow and with-flow image pairs) producing a schlieren-like image. One advantage of BOS is its simplified setup which enables a larger field-of-view (FOV) than traditional schlieren systems. In the present study, BOS was implemented into the Combined Cycle Engine Large-Scale Inlet Mode Transition Experiment (CCE LIMX) in the 10x10 Supersonic Wind Tunnel at NASA Glenn Research Center. The model hardware for the CCE LIMX accommodates a fully integrated turbine based combined cycle propulsion system. To date, inlet mode transition between turbine and ramjet operation has been successfully demonstrated. High-speed BOS was used to visualize the behavior of the flow structures shock waves during unsteady inlet unstarts, a phenomenon known as buzz. Transient video images of inlet buzz were recorded for both the ramjet flow path (high speed inlet) and turbine flow path (low speed inlet). To understand the stability limits of the inlet, operation was pushed to the point of unstart and buzz. BOS was implemented in order to view both inlets simultaneously, since the required FOV was beyond the capability of the current traditional schlieren system. An example of BOS data (Images 1-6) capturing inlet buzz are presented.

Background-oriented schlieren↗
NASA NTRS2017

Synergies Between the Kepler, K2 and TESS Missions with the PLATO Mission (Revised)

Two transit survey missions will have been flown by NASA prior to the launch of ESA's PLATO Mission in 2026, laying the groundwork for exoplanet discovery via the transit method. The Kepler Mission, which launched in 2009, collected data on its 100+ square degree field of view for four years before failure of a reaction wheel ended its primary mission. The results from Kepler include 2300+ confirmed or validated exoplanets, 2200+ planetary candidates, 2100+ eclipsing binaries. Kepler also revolutionized the field of asteroseismology by measuring the pressure mode oscillations of over 15000 solar-like stars spanning the lifecycle of such stars from hydrogen-burning dwarfs to helium-burning red giants. The re-purposed Kepler Mission, dubbed K2, continues to observe fields of view in and near the ecliptic plane for 80 days each, significantly broadening the scope of the astrophysical investigations as well as discovering an additional 156 exoplanets to date. The TESS mission will launch in 2017 to conduct an all-sky survey for small exoplanets orbiting stars 10X closer and 100X brighter than Kepler exoplanet host stars, allowing for far greater follow-up and characterization of their masses as well as their sizes for at least 50 small planets. Future assets such as James Webb Space Telescope, and ground-based assets such as ESOs Very Large Telescope (VLT) array, the Exremely Large Telescope (ELT), and the Thirty Meter Telescope (TMT) will be able to characterize the atmospheric composition and properties of these small planets. TESS will observe each 24 X 96 field of view for 30 days and thereby cover first the southern and then the northern hemisphere over 13 pointings during each year of the primary mission. The pole-most camera will observe the James Webb continuous viewing zone for one year in each hemisphere, permitting much longer period planets to be detected in this region. The PLATO mission will seek to detect habitable Earth-like planets with an instrument composed of 26 small telescopes in several 2232 square deg FOVs with a range of observation durations over a mission lifetime of up to eight years. This paper summarizes the findings of the KeplerK2 missions, previews the likely results from the TESS mission, and explores the lessons learned and to be learned from these prior missions that can be incorporated into the observation and data reduction strategy for the PLATO Mission so as to maximize the science return.

exoplanet detection↗
NASA NTRS1981

Time and space spectra of earth-emitted radiation at large scales

Several earth radiation instruments have been flown on spacecraft. The most recent of these instruments has been the Earth Radiation Budget (ERB) instrument aboard the Nimbus 6 and Nimbus 7 spacecraft. The ERB instrument includes two earth-viewing wide-field-of-view (WFOV) radiometers one of which measures total irradiance and the other measures shortwave (SW) irradiances. he difference between the two irradiances is the longwave (LW) or earth-emitted irradiance. The ERB instrument has been providing WFOV measurements since July 1975. These WFOV data are suitable for studying large-scale processes over spatial scales of thousands of kilometers. The present investigation is concerned with a study of the annual cycle of the distribution of the earth's LW radiation. This study is based on one year of WFOV data, from July 1975 through June 1976. The present investigation is an extension of the study by Bess and Smith (1979).

Bess, T. D.↗
NASA NTRS2015

Double-Diffusive Convection During Growth of Halides and Selenides

Heavy metal halides and selenides have unique properties which make them excellent materials for chemical, biological and radiological sensors. Recently it has been shown that selenohalides are even better materials than halides or selenides for gamma-ray detection. These materials also meet the strong needs of a wide band imaging technology to cover ultra-violet (UV), midwave infrared wavelength (MWIR) to very long wavelength infrared (VLWIR) region for hyperspectral imager components such as etalon filters and acousto-optic tunable filters (AO). In fact AOTF based imagers based on these materials have some superiority than imagers based on liquid crystals, FTIR, Fabry-Perot, grating, etalon, electro-optic modulation, piezoelectric and several other concepts. For example, broadband spectral and imagers have problems of processing large amount of information during real-time observation. Acousto-Optic Tunable Filter (AOTF) imagers are being developed to fill the need of reducing processing time of data, low cost operation and key to achieving the goal of covering long-wave infrared (LWIR). At the present time spectral imaging systems are based on the use of diffraction gratings are typically used in a pushbroom or whiskbroom mode. They are mostly used in systems and acquire large amounts of hyperspectral data that is processed off-line later. In contrast, acousto-optic tunable filter spectral imagers require very little image processing, providing new strategies for object recognition and tracking. They are ideally suited for tactical situations requiring immediate real-time image processing. But the performance of these imagers depends on the quality and homogeneity of acousto-optic materials. In addition for many systems requirements are so demanding that crystals up to sizes of 10 cm length are desired. We have studied several selenides and halide crystals for laser and AO imagers for MWIR and LWIR wavelength regions. We have grown and fabricated crystals of several materials such as mercurous chloride, mercurous bromide, mercurous iodide, lead chloride lead bromide, lead iodide, thallium arsenic selenide, gallium selenide, zince sulfide zinc selenide and several crystals into devices. We have used both Bridgman and physical vapor transport (PVT) crystal growth methods. In the past have examined PVT growth numerically for conditions where the boundary of the enclosure is subjected to a nonlinear thermal profile. Since past few months we have been working on binary and ternary materials such as selenoiodides, doped zinc sulfides and mercurous chloro bromide and mercurous bromoiodides. In the doped and ternary materials thermal and solutal convection play extremely important role during the growth. Very commonly striations and banding is observed. Our experiments have indicated that even in highly purified source materials, homogeneity in 1-g environment is very difficult. Some of our previous numerical studies have indicated that gravity level less than 10-4 (-g) helps in controlling the thermosolutal convection. We will discuss the ground based growth results of HgClxBr(1-x) and ZnSe growth results for the mm thick to large cm size crystals. These results will be compared with our microgravity experiments performed with this class of materials. For both HgCl-HgBr and ZnS-ZnSe the lattice parameters of the mixtures obey Vagard's law in the studied composition range. The study demonstrates that properties are very anisotropic with crystal orientation, and performance achievement requires extremely careful fabrication to utilize highest figure of merit. In addition, some parameters such as crystal growth fabrication, processing time, resolution, field of view and efficiency will be described based on novel solid solution materials. It was predicted that very similar to the pure compounds solid solutions also have very large anisotropy, and very precise oriented and homogeneous bulk and thin film crystals is required to achieve maximum performance of laser or imagers. Some of the parameters controlling the homogeneity such as thermos-solutal convection driven forces can be controlled in microgravity environments to utilize the benefits of these unique materials.

Singh, N. B.↗
NASA NTRS1983

Annual cycle and spatial spectra of earth emitted radiation at large scales

Monthly averaged, resolution enhanced global distributions of the earth's emitted radiation, as measured by the Nimbus-6 Earth Radiation Budget (ERB) wide field of view radiometers, have been analyzed for 1 year of data from July 1975 to June 1976. These distributions are expressed in terms of spherical harmonic coefficients, and time and space variability of the emitted radiation field is studied in terms of these coefficients. The average annual distribution accounts for 78 percent of the space-time power, and the annual cycle accounts for 17 percent of the power. Spatial variations over the globe are described in terms of degree variance, and longitudinal variations are described in terms of spectral power as a function of latitude. The longitudinal spectra were found to vary strongly with time.

Smith, G. L.↗
NASA NTRS1977

An infrared upconverter for astronomical imaging

An imaging upconverter has been constructed which is suitable for use in the study of the thermal 10-micron radiation from astronomical sources. The infrared radiation is converted to visible radiation by mixing in a 1-cm-long proustite crystal. The phase-matched 2-kayser bandpass is tunable from 9 to 11 microns. The conversion efficiency is 2 by 10 to the -7th power and the field of view of 40 arc seconds on the sky contains several hundred picture elements, approximately diffraction-limited resolution in a large telescope. The instrument has been used in studies of the sun, moon, Mercury, and VY Canis Majoris.

Boyd, R. W.↗
NASA NTRS1988

The interannual variability of atmospheric water vapor on Mars

The acquisition of several north-south scans during the Survey/Completion Mission by the Mars Atmospheric Water Detector (MAWD) onboard Viking Orbiter 1 make it possible to compare water vapor column abundance during northern spring and early summer seasons from three successive Mars years. All three years exhibit very similar seasonal trends. Differences between years tend to be localized, and not regional, with maximum differences between years occurring in the same general areas that the day-to-day variability of water vapor as observed by MAWD is large. It is suggested that the observed year-to-year differences are also artifacts of clouds in the MAWD field of view and that there is remarkably little difference in the water cycle during northern spring and early summer, despite very different dust storm episodes during the preceding three years.

Zurek, Richard W.↗
NASA NTRS1993

Targeting an asteroid - The Galileo spacecraft's encounter with 951 Gaspra

On 1991 October 29, the Galileo spacecraft provided the first in situ observations of an asteroid. To a significant degree, the successful encounter with asteroid 951 Gaspra was made possible by the high accuracy of the ground-based Gaspra ephemeris and the refinement to this initial ephemeris provided by the use of optical navigation images taken on board the spacecraft itself. The success of these celestial navigation efforts was dramatically demonstrated when Gaspra appeared in the central frame of the large mosaic of CCD images-less than one asteroid diameter from Gaspra's expected location in the camera's field of view. The corrections to Gaspra's ground-based ephemeris, based upon the optical on-board navigation images, were less than 80 km. The ground-based observation program that went into this ephemeris development is discussed and the accuracy of the ephemeris is used to validate the assumptions that went into the error analysis studies.

Yeomans, D. K.↗