Search NASA⌕ Search

SEARCH · Search NASA

Results for “lattice constants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Lattice anharmonicity effects in fluorite oxide single crystals and anomalous increase in phonon lifetime in ceria at elevated temperature

Here, we investigate the temperature dependence of the frequency and linewidth of the triply degenerate T 2g zone-centered optical phonon in flux-grown ceria and hydrothermally synthesized thoria single crystals from room temperature to 1273 K using Raman spectroscopy. Both crystals exhibit an expected increase in the phonon linewidth with temperature due to enhanced phonon–phonon scattering. However, ceria displays an anomalous linewidth reduction in the temperature range of 1023–1123 K. First-principles phonon linewidth calculations considering cubic and quartic phonon interactions within temperature-independent phonon dispersion fail to describe this anomaly. A parameterization of the temperature-dependent second-order interatomic force constants based on previously reported phonon dispersion measured at room and high temperatures predicts a deviation from the monotonic linewidth increase, albeit at temperatures lower than those observed experimentally for ceria. The qualitative agreement in the trend of temperature-dependent linewidth suggests that lattice anharmonicity-induced phonon renormalization plays a role in phonon lifetime. Specifically, a change in the overlap between softened acoustic and optical branches in the dispersion curve reduces the available phonon scattering phase space of the Raman-active mode at the zone center, leading to an increased phonon lifetime within a narrow temperature interval. These findings provide insights into higher-order anharmonic interactions in ceria and thoria, motivating further investigations into the role of anharmonicity-induced phonon renormalization on phonon lifetimes at high temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Dielectric catastrophe at the Wigner-Mott transition in a moiré superlattice

The bandwidth-tuned Wigner-Mott transition is an interaction-driven phase transition from a generalized Wigner crystal to a Fermi liquid. Because the transition is generally accompanied by both magnetic and charge-order instabilities, it remains unclear if a continuous Wigner-Mott transition exists. Here, we demonstrate bandwidth-tuned metal-insulator transitions at fixed fractional fillings of a MoSe 2 /WS 2 moiré superlattice. The bandwidth is controlled by an out-of-plane electric field. The dielectric response is probed optically with the 2s exciton in a remote WSe 2 sensor layer. The exciton spectral weight is negligible for the metallic state with a large negative dielectric constant. It continuously vanishes when the transition is approached from the insulating side, corresponding to a diverging dielectric constant or a ‘dielectric catastrophe’ driven by the critical charge dynamics near the transition. Our results support the scenario of continuous Wigner-Mott transitions in two-dimensional triangular lattices and stimulate future explorations of exotic quantum phases in their vicinities.

42 ENGINEERING↗
DOE OSTI2025

Non-equilibrium dynamics in geometrically frustrated spin glass Bi 2 Fe 3 GaO 9 with a Cairo lattice

We have explored the magnetic relaxation of the spin glass phase in Bi 2 Fe 3 GaO 9 , a geometrically frustrated magnet with a unique Cairo lattice made of pentagonal building blocks. Using dc magnetization measurements, we find the relaxation behavior in single crystals follows the Arrhenius law as a function of temperature but remains relatively constant under different magnetic fields. Through a carefully designed protocol, we observe significant rejuvenation and memory effects, reminiscent of classical dilute spin glasses rather than spin jamming systems. Our finding suggests that Bi 2 Fe 3 GaO 9 is probably located in the crossover between conventional spin glass and perfect spin jam and thus provides an excellent platform for investigating the evolution of underlying magnetic structure, paving the way for further neutron scattering research.

aging↗
DOE OSTI2026

Euclidean correlation functions in quantum gravity

We calculate Euclidean correlation functions through next-to-leading order in the low-energy effective theory of gravity. We focus on correlation functions of curvature and volume operators, calculating these functions through one-loop order. We show that quantum fluctuations of the background spacetime must be taken into account in order to obtain gauge invariant expressions, and we point out a subtlety associated with the analytic continuation of the conformal mode. Our final expressions for the correlation functions involve only Newton’s constant and the source-sink separation, and they are a universal prediction of the low-energy effective theory. Thus, they serve as a useful point of comparison for nonperturbative lattice formulations of gravity.

Effective field theory↗
DOE OSTI2022

Strong coupling constant from moments of quarkonium correlators revisited

We revisit previous determination of the strong coupling constant from moments of quarkonium correlators in (2 + 1)-flavor QCD. We use previously calculated moments obtained with Highly Improved Staggered Quark (HISQ) action for five different quark masses and several lattice spacings. We perform a careful continuum extrapolations of the moments and from the comparison of these to the perturbative result we determine the QCD Lambda parameter, $\varLambda _{\overline{MS}}^{n_f=3}=332 \pm 17 \pm 2(scale)$ MeV. This corresponds to $\alpha _s^{n_f=5}(\mu =M_Z)=0.1177(12)$.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The Novel Hybrid Ab Initio Model of High-Performance Structural Alloys Design for Fossil Energy Power Plants

The current project developed a novel HT-CALPHAD/DFT approach, which can quickly design new high-performance structural alloys for the application of FE power plants. The PI will mainly take charge of high-throughput DFT simulations and computational thermodynamics of the selected multicomponent alloy systems for the FE power plant applications. At the end of the project, a novel hybrid model based on high throughput CALPHAD/DFT simulations and computational thermodynamics will be developed to provide guidance on how to identify multi-component new high-performance structural alloys with much less computational effort needed. It will address the extensive computation time needed for DFT on the new alloys design. In addition, it will also address the well-known headache of DFT, i.e. how to make the accurate prediction of the high-temperature equilibria. The novel hybrid model the PI proposed will not only be applied to the design of high-performance structural alloys in FE power plants but in many different applications, such as nuclear reactors. This hybrid modeling approach includes four sections: 1) HT-CALPHAD modeling of Al-Co-Cr-Ni-Fe system with FCC and BCC phase. In this section, 3561 non-equiatomic compositions were randomly generated in order to investigate the phase stability of single FCC and BCC phases. Meanwhile, we proposed a data screening procedure to screen out the good candidates within these compositions, considering the temperature range, average density, and melting temperature, etc. 2) Investigation of FCC-Cr lattice stability in Fe-Cr system. We systematically assessed the reliability of FCC-Cr lattice stability derived by DFT and CALPHAD approaches. Meanwhile, the Fe-Cr binary system was chosen as a case study to verify the Cr lattice stability obtained by both approaches. 3) High-throughput DFT modeling on elastic properties of Al-Co-Cr-Ni-Fe systems. We predicted and established the FCC quinary elastic constant database of the Al-Co-Cr-Fe-Ni systems at 0K by using special quasi-random structure (SQS) approach. The predictions will start with pure elements of Al-Co-Cr-Fe-Ni system and will be continued with binaries, ternaries, quaternaries, and finally the quinary compositions. 3) Modeling of temperature-dependent elastic properties in Al-Co-Cr-Ni-Fe systems. In this part, we predict the thermal expansion coefficient and elastic stiffness coefficient as a function of temperature by applying quasiharmonic approximation. With this approach, the elastic properties of HEAs at elevate temperature can be estimated.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS1996

Self-Consistent Simulation of the Brownian Stage of Dust Growth

It is a widely accepted view that in proto-planetary accretion disks the collision and following sticking of dust particles embedded in the gas eventually leads to the formation of planetesimals (coagulation). For the smallest dust grains, Brownian motion is assumed to be the dominant source of their relative velocities leading to collisions between these dust grains. As the dust grains grow they eventually couple to the turbulent motion of the gas which then drives the coagulation much more efficiently. Many numerical coagulation simulations have been carried out to calculate the fractal dimension of the aggregates, which determines the duration of the ineffective Brownian stage of growth. Predominantly on-lattice and off-lattice methods were used. However, both methods require simplification of the astrophysical conditions. The aggregates found by those methods had a fractal dimension of approximately 2 which is equivalent to a constant, mass-independent friction time. If this value were valid for the conditions in an accretion disk, this would mean that the coagulation process would finally 'freeze out' and the growth of a planetesimal would be impossible within the lifetime of an accretion disk. In order to investigate whether this fractal dimension is model independent, we simulate self-consistently the Brownian stage of the coagulation by an N-particle code. This method has the advantage that no further assumptions about homogeneity of the dust have to be made. In our model, the dust grains are considered as aggregates built up of spheres. The equation of motion of the dust grains is based on the probability density for the diffusive transport within the gas atmosphere. Because of the very low number density of the dust grains, only 2-body-collisions have to be considered. As the Brownian stage of growth is very inefficient, the system is to be simulated over long periods of time. In order to find close particle pairs of the system which are most likely to undergo a collision, we use a particle-in-cell (PIC) method for the early stages of the simulation where the system is still very homogeneous and a tree method later when the particles are more clustered.

Kempf, S.↗
NASA NTRS2022

Multi-Agent Control Approach to the Stability of Linear Deployable Systems

Collisions and undesired dynamic responses may occur during the expansion phase of deployable elements on a spacecraft. This problem is more pronounced in large and complex deployable elements where characterization of transient dynamics using testing and simulation can be challenging. This paper introduces a multi-agent control theory approach to address the problem of collisions and transient behavior in deployable lattice systems. We introduce the graph theoretic and relative error vector-based state-space structures to represent the geometry of a lattice-based deploy system. We show that under the assumption of almost-strict dissipativity, the closed-loop feedback gains of the relative error dynamics are the spring and damper constants in the structure. Moreover, we introduce the control perspective of shaping transient dynamics using eigenstructure assignment and balanced coordinate transformation.

Pablos, Juan L. de↗
DOE OSTI2023

Eu speciation in apatite at 1 bar: An experimental study of valence-state partitioning by XANES, lattice strain, and Eu/Eu* in basaltic systems

Abstract Partition coefficients for rare earth elements (REEs) between apatite and basaltic melt were determined as a function of oxygen fugacity (fO2; iron-wüstite to hematite-magnetite buffers) at 1 bar and between 1110 and 1175 °C. Apatite-melt partitioning data for REE3+ (La, Sm, Gd, Lu) show near constant values at all experimental conditions, while bulk Eu becomes more incompatible (with an increasing negative anomaly) with decreasing fO2. Experiments define three apatite calibrations that can theoretically be used as redox sensors. The first, a XANES calibration that directly measures Eu valence in apatite, requires saturation at similar temperature-composition conditions to experiments and is defined by: ( E u 3 + ∑ E u ) Apatite = 1 1 + 10 - 0.10 ± 0.01 × l o g ⁡ ( f o 2 ) - 1.63 ± 0.16 . The second technique involves analysis of Sm, Eu, and Gd in both apatite and coexisting basaltic melt (glass), and is defined by: ( Eu E u * ) D Sm × Gd = 1 1 + 10 - 0.15 ± 0.03 × l o g ⁡ ( f o 2 ) - 2.46 ± 0.41 . The third technique is based on the lattice strain model and also requires analysis of REE in both apatite and basalt. This calibration is defined by ( Eu E u * ) D lattice strain = 1 1 + 10 - 0.20 ± 0.03 × l o g ⁡ ( f o 2 ) - 3.03 ± 0.42 . The Eu valence-state partitioning techniques based on (Sm×Gd) and lattice strain are virtually indistinguishable, such that either methodology is valid. Application of any of these calibrations is best carried out in systems where both apatite and coexisting glass are present and in direct contact with one another. In holocrystalline rocks, whole rock analyses can be used as a guide to melt composition, but considerations and corrections must be made to either the lattice strain or Sm×Gd techniques to ensure that the effect of plagioclase crystallization either prior to or during apatite growth can be removed. Similarly, if the melt source has an inherited either a positive or negative Eu anomaly, appropriate corrections must also be made to lattice strain or Sm×Gd techniques that are based on whole rock analyses. This being the case, if apatite is primary and saturates from the parent melt early during the crystallization sequence, these corrections may be minimal. The partition coefficients for the REE between apatite and melt range from a maximum DEu3+ = 1.67 ± 0.25 (as determined by lattice strain) to DLu3+ = 0.69 ± 0.10. The REE partition coefficient pattern, as observed in the Onuma diagram, is in a fortuitous situation where the most compatible REE (Eu3+) is also the polyvalent element used to monitor fO2. These experiments provide a quantitative means of assessing Eu anomalies in apatite and how they be used to constrain the oxygen fugacity of silicate melts.

Geochemistry & Geophysics↗
DOE OSTI2023

Iridium Incorporation into MnO 2 for an Enhanced Electrocatalytic Oxygen Evolution Reaction

Here, we have investigated the structure and activity of electrocatalysts for the oxygen evolution reaction (OER) that had low loadings of Ir incorporated into the 2D layered MnO 2 , (birnessite, nominally δ-MnO 2 ) and the 3D MnO 2 (pyrolusite, β-MnO 2 ). The Ir-incorporated β-MnO 2 (Ir/β-MnO 2 ) electrocatalysts were prepared for the first time via a thermally induced phase transition of δ-MnO 2 containing 16-22 wt% Ir. This phase transition of δ-MnO 2 to β-MnO 2 was facilitated by the presence of Ir in the structure, as both Ir in IrO 2 and Mn in β-MnO 2 could adopt a thermodynamically favored rutile structure. Extended X-ray absorption fine structure (EXAFS) of Ir/β-MnO 2 showed that the catalyst consisted of Ir substituted into the crystalline β-MnO 2 lattice. 22 wt% Ir/β-MnO 2 (60 μg Ir cm $\ ^{-2}_{geo}$) exhibited an OER overpotential (η) of 337 mV, lower than the η for commercial IrO 2 . This η was constant for 6 h, at 10 mA cm $\ ^{-2}_{geo}$ in 0.5 M H 2 SO 4 . EXAFS, high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray absorption near edge structure (XANES) showed that 22 wt% Ir/β-MnO 2 had a strained structure containing ~41% Mn 3+ , an OER active species, along with a modified Ir bond covalency consisting of both Ir-O-Ir and Ir-O-Mn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Magnetism in Mixed Valence, Defect, Cubic Perovskites: BaIn 1– x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75. Local and Average Structures

The series BaIn 1–x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75, has been prepared under air-fired and argon-fired conditions and studied using X-ray diffraction, d.c. and a.c. susceptibility, Mössbauer spectroscopy, neutron diffraction, X-ray near edge absorption spectroscopy (XANES), and X-ray pair distribution (PDF) methods. While Ba 2 In 2 O 5 (BaInO 2.5 ) crystallizes in an ordered brownmillerite structure, Ibm2, and Ba 2 Fe 2 O 5 (BaFeO 2.5 ) crystallizes in a complex monoclinic structure, P2 1 /c, showing seven Fe 3+ sites with tetrahedral, square planar, and octahedral environments, all phases studied here crystallize in the cubic perovskite structure, Pm$\bar{}3}$m, with long-range disorder on the small cation and oxygen sites. 57 Fe Mössbauer studies indicate a mixed valency, Fe 4+ /Fe 3+ , for both the air-fired and argon-fired samples. The increased Fe 3+ content for the argon-fired samples is reflected in increased cubic cell constants and in the increased Mössbauer fraction. It appears that the Pm$\bar{}3}$m phases are only metastable when fired in argon. From a slightly modified percolation theory for a primitive cubic lattice (taking into account the presence of random O atom vacancies), long-range spin order is permitted for the x = 0.50 and 0.75 phases. Instead, the d.c. susceptibility shows only zero-field-cooled (ZFC) and field-cooled (FC) divergences at ~6 K [5 K] for x = 0.50 and at ~22 K [21 K] for x = 0.75, with values for the argon-fired samples in [ ]. Neutron diffraction data for the air-fired samples confirm the absence of long-range magnetic order at any studied temperature. For the air-fired x = 0.50, a.c. susceptibility data show a frequency-dependent χ'(max) and spin glass behavior, while for x = 0.75, χ'(max) is invariant with frequency, ruling out either a spin glass or a superparamagnetic ground state. These behaviors are discussed in terms of competing Fe 3+ –Fe 3+ antiferromagnetic exchange and ferromagnetic Fe 3+ –Fe 4+ exchange. The PDF and 57 Fe Mössbauer data indicate a local structure at short interatomic distances, which deviates strongly from the average Pm$\bar{}3}$m model. Fe Mössbauer, PDF, and XANES data show a systematic dependence on x and indicate that the Fe 3+ sites are largely fourfold-coordinated and Fe 4+ sites are fivefold- or sixfold-coordinated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

First-Principles Studies on Sc 2 RuZ (Z = Si, Ge, Sn) Inverse Heusler Alloys: Structural, Electronic, and Transport Properties

The continuous demand for efficient, nontoxic, and thermally stable materials for room-temperature energy conversion motivates the exploration of novel thermoelectric systems beyond the traditional magnetic Heusler alloys. While full and half-Heusler compounds, especially Co-, Ni-, and Mn-based systems, have demonstrated promising thermoelectric properties, their typically high operating temperatures and magnetic complexities limit their applicability in ambient thermal management. In this context, we investigate whether Sc-based inverse Heusler alloys can offer a viable nonmagnetic alternative with competitive thermoelectric performance. In this work, we perform a systematic first-principles study of the inverse Heusler compounds Sc 2 RuZ (Z = Si, Ge, Sn), focusing on their structural, electronic, mechanical, and thermodynamic-thermoelectric properties. Density Functional Theory (DFT) was employed to compute optimized lattice structures and band dispersion, while dynamical stability was assessed via phonon calculations. Thermoelectric transport coefficients, including Seebeck coefficient, electrical conductivity, and thermal conductivity, were estimated using the semiclassical Boltzmann transport theory within the constant relaxation time approximation. Our results show that all Sc 2 RuZ compounds are thermodynamically stable semiconductors with indirect band gaps of 0.12–0.16 eV and exhibit high elastic moduli, especially Sc 2 RuSn, which demonstrates superior stiffness and incompressibility. Importantly, all compounds display promising room-temperature thermoelectric characteristics, including high Seebeck coefficients and power factors. These findings reveal that Sc 2 RuZ alloys represent a rare class of stable, nonmagnetic inverse Heusler semiconductors with intrinsic thermoelectric potential at room temperature, unlike many existing Heusler systems optimized for spintronics or high-temperature operation. This work expands the known design space for Heusler-based thermoelectrics and offers a theoretical basis for experimental realization of efficient, low-temperature, nonmagnetic thermoelectric materials.

alloys↗
NASA NTRS1997

Correspondence between discrete and continuous models of excitable media: trigger waves

We present a theoretical framework for relating continuous partial differential equation (PDE) models of excitable media to discrete cellular automata (CA) models on a randomized lattice. These relations establish a quantitative link between the CA model and the specific physical system under study. We derive expressions for the CA model's plane wave speed, critical curvature, and effective diffusion constant in terms of the model's internal parameters (the interaction radius, excitation threshold, and time step). We then equate these expressions to the corresponding quantities obtained from solution of the PDEs (for a fixed excitability). This yields a set of coupled equations with a unique solution for the required CA parameter values. Here we restrict our analysis to "trigger" wave solutions obtained in the limiting case of a two-dimensional excitable medium with no recovery processes. We tested the correspondence between our CA model and two PDE models (the FitzHugh-Nagumo medium and a medium with a "sawtooth" nonlinear reaction source) and found good agreement with the numerical solutions of the PDEs. Our results suggest that the behavior of trigger waves is actually controlled by a small number of parameters.

Non-NASA Center↗
DOE OSTI2022

Origin of ultralow phonon transport and strong anharmonicity in lead-free halide perovskites

All-inorganic lead-free halide double perovskites offer a promising avenue toward non-toxic, stable optoelectronic materials, properties that are missing in their prominent lead-containing counterparts. Their large thermopowers and high carrier mobilities also make them promising for thermoelectric applications. Here, in this work, we present a first-principles study of the lattice vibrations and thermal transport behaviors of Cs 2 SnI 6 and γ-CsSnI 3 , two prototypical compounds in this materials class. We show that conventional static zero temperature density functional theory (DFT) calculations severely underestimate the lattice thermal conductivities (κ l ) of these compounds, indicating the importance of dynamical effects. By calculating anharmonic renormalized phonon dispersions, we show that some optic phonons significantly harden with increasing temperature (T), which reduces the scattering of heat carrying phonons and enhances calculated κ l values when compared with standard zero temperature DFT. Furthermore, we demonstrate that coherence contributions to κ l , arising from wave like phonon tunneling, are important in both compounds. Overall, calculated κ l with temperature-dependent interatomic force constants, built from particle and coherence contributions, are in good agreement with available measured data, for both magnitude and temperature dependence. Large anharmonicity combined with low phonon group velocities yield ultralow values, with room temperature values of 0.26 W/m-K and 0.72 W/m-K predicted for Cs 2 SnI 6 and γ-CsSnI 3 , respectively. We further show that the lattice dynamics of these compounds are highly anharmonic, largely mediated by rotation of the SnI6 octahedra and localized modes originating from Cs rattling motion. These thermal characteristics combined with their previously computed excellent electronic properties make these perovskites promising candidates for optoelectronic and room temperature thermoelectric applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Resonance form factors from finite-volume correlation functions with the external field method

A novel method for the extraction of form factors of unstable particles on the lattice is proposed. The approach is based on the study of two-particle scattering in a static, spatially periodic external field by using a generalization of the Lüscher method in the presence of such a field. It is shown that the resonance form factor is given by the derivative of the resonance pole position in the complex plane with respect to the coupling constant to the external field. Unlike the standard approach, this proposal does not suffer from problems caused by the presence of the triangle diagram.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Dependence of the Elastic Stiffness Tensors of PETN, α‐RDX, γ‐RDX, ϵ‐RDX, ϵ‐CL‐20, DAAF, FOX‐7, and β‐HMX on Hydrostatic Compression

Abstract The dependence of the components of the elastic stiffness tensors (or elastic constants) of the organic explosives PETN, RDX, CL‐20, DAAF, FOX‐7, and HMX on hydrostatic pressure up to 10 GPa have been computed using dispersion‐corrected density functional theory. We report the evolution of lattice parameters and the non‐zero stiffnesses for the tetragonal, orthorhombic, and monoclinic crystal symmetries. Linear and quadratic dependencies of the components of the elastic stiffness tensors on volumetric compression and hydrostatic pressure are tabulated for use in single crystal plasticity models.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Defect chemistry and characterization Hg(1-x)Cd(x)Te

Iodine doped single crystal samples of mercury cadmium telluride were annealed at temperatures varying from 450 C to 600 C in Hg vapor and quenched to room temperature. Hall effect measurements at 77 K on the crystals cooled to room temperature indicate the samples to be n-type after anneals at high Hg pressures whereas they turn p-type after anneals at low Hg pressures; the electron concentration increases with increase in Hg pressure. The results are explained on the basis that the crystals are saturated with (Hg,Cd)I2, with a fraction of the iodine being present as donor occupying tellurium lattice sites and a fraction being present as acceptors resulting from the iodine on tellurium lattice sites pairing with the doubly ionized native acceptor defects. The solubility of the donor species increases with increase in Hg pressure, whereas that of the acceptor species increases with decrease in Hg pressure. Equilibrium constants for the incorporation of the iodine species as well as the pairing reaction were established.

Vydyanath, H. R.↗