SEARCH · Search NASA

Results for “layered crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Pyroelectric Heat Detection for Calibrated Measurement of Atomic Layer Deposition Reaction Heat

Atomic layer deposition (ALD) precursors and processes have been identified that enable the deposition of materials that span the periodic table. However, the detailed mechanisms, kinetics, thermodynamics, and complexities of even the most well-studied ALD half-reactions remain insufficiently resolved experimentally to test present computational hypotheses. In this work, a pyroelectric calorimeter is designed, implemented, calibrated, and electrically modeled to enable quantitative ALD reaction heat detection. The operation and response of three ALD calorimeter designs were evaluated for use as absolute ALD half-reaction heat detectors. The most effective design was calibrated in situ before being utilized to measure the heat generated by the reaction of trimethylaluminum with a hydroxylated alumina surface to produce 96 μJ/cm 2 over a reaction time of ~30 ms. With thermal and temporal resolutions down to 0.1 μJ/cm 2 and 50 ns, respectively, this sensitive and ultrafast probe is poised to improve our fundamental understanding of numerous ALD reaction mechanisms through quantitative comparison with first-principles computation predictions.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Role of Surface Features on the Initial Dissolution of CH 3 NH 3 PbI 3 Perovskite in Liquid Water: An Ab Initio Molecular Dynamics Study

In this study, the degradation of CH 3 NH 3 PbI 3 (MAPbI 3 ) hybrid organic inorganic perovskite (HOIP) by water has been the major issue hampering its use in commercial perovskites solar cells (PSCs) as MAPbI 3 HOIP have been known to easily degrade in the presence of water molecules. However, even though there have been numerous studies investigating this phenomenon, there is still no consensus on the mechanisms of initial stages of dissolution. Here, we attempt to consolidate differing mechanistic interpretations previously reported in the literature through the use of the first-principles constrained ab-initio molecular dynamics (AIMD) to study the mechanisms, kinetics, and thermodynamics that accompany the degradation of MAPbI 3 HOIP in liquid water. We consider not only the dissolution of the species found on the pristine MAPbI 3 HOIP surfaces, but also the dissolution from defect sites to imitate the successive degradation steps, and propose a sequence of events in the initial phase of MAPbI 3 HOIP dissolution. By comparing the dissolution free energy barrier between surface species of different surficial types, we find that the dominant dissolution mechanisms of surface species varies widely based on the specific surface features adjacent to the dissolving ion. The high sensitivity of dissolution mechanism to surface features has contributed to the many dissolution mechanisms proposed in the literature. In contrast, the dissolution free energy barriers are mainly determined by the dissolving species rather than the type of surfaces, and the type of surfaces the ions are dissolving from are inconsequential toward the dissolution free energy barrier. However, the presence of surface defects such as vacancy sites are found to significantly lower the dissolution free energy barriers. Based on the estimated dissolution free energy barriers from different types of surfaces that we investigated in this study, we proposed that the dissolution of MAPbI 3 HOIP in liquid water originates from surface defect sites that propagate laterally along the surface layer of the MAPbI 3 HOIP crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Emergent quasi-one-dimensional antiferromagnetism in the distorted kagome magnet CePtPb

CePtPb hosts a distorted kagome lattice of Ce 3+ ions, providing a clean platform to investigate how reduced local symmetry and strong spin-orbit coupling reshape frustrated magnetism. Magnetization, specific heat, and magnetocaloric effect measurements, combined with a symmetry analysis of the single-ion anisotropy, demonstrate that the local 𝑚⁢2⁢𝑚 site symmetry selects a nearly Ising-like Kramers doublet with easy axes lying within the 𝑎⁢𝑏 plane. This results in three distinct in-plane Ising directions and an overall easy-plane anisotropy. The low-energy magnetic response is well captured by a three-sublattice Ising model, which quantitatively reproduces the saturation magnetization for arbitrary in-plane field orientations, including $[110]$ and $[1\bar{⁢1}⁢0]$, as well as the ratio of the field-induced critical fields. For 𝐵∥$[110]$, the phase diagram exhibits two quantum critical points at 𝐵 c⁢1 = 0.25T and 𝐵 c⁢2 = 0.55T, arising from the sequential polarization of the three Ising sublattices. In conclusion, these results reveal that the system develops quasi-one-dimensional spin chains along the 𝑐 axis, emerging from the nominally three-dimensional crystal structure composed of stacked kagome layers, and illustrate how reduced local symmetry can drive effective dimensional reduction in rare-earth Ising magnets.

Li, Fangli [Southern University of Science and Tec↗

DOE OSTI2023

Proposal to detect emergent gauge field and its Meissner effect in spin liquids using NV centers

Here, we show that nitrogen-vacancy (NV) centers could provide distinct signatures of emergent gauge fields in certain phase transitions in spin liquids. We consider the relaxation rate 1/ T 1 of a diamond NV center placed a distance z 0 above a crystal consisting of two-dimensional layers which hosts a U(1) quantum spin liquid with spinon Fermi surface. We show that, during a spinon pairing transition from a U(1) to a Z2 spin liquid, the relaxation rate exhibits a rapid fall just below the pairing transition. The drop is much faster than what can be accounted for by the opening of the energy gap. Instead, the rapid fall with a unique z 0 dependence of its height and width is the signature of the Meissner effect of the gauge field. We identify the organic ET compound which has a phase transition at 6 K as a candidate for the experimental observation of this phenomenon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Dehydration synthesis and crystal structure of terbium oxychloride, TbOCl

Terbium oxychloride, TbOCl, was synthesized via a simple heat-treatment of TbCl3·6H2O. The structure was determined using X-ray powder diffraction (XRD) data. The TbOCl compound crystallizes within the tetragonal P4/nmm space group, and its crystal structure is composed of alternating layers of (TbO)n and n Cl- anions. The unit cell parameters, volume, and density were compared to the literature data of other isostructural rare-earth oxychlorides in the P4/nmm space group and showed a good agreement when fitted to the calculated trendlines.

oxychloride, rare-earth oxyhalide, powder diffract↗

DOE OSTI2023

Li iontronics in single-crystalline T-Nb2O5 thin films with vertical ionic transport channels

Abstract The niobium oxide polymorph T -Nb 2 O 5 has been extensively investigated in its bulk form especially for applications in fast-charging batteries and electrochemical (pseudo)capacitors. Its crystal structure, which has two-dimensional (2D) layers with very low steric hindrance, allows for fast Li-ion migration. However, since its discovery in 1941, the growth of single-crystalline thin films and its electronic applications have not yet been realized, probably due to its large orthorhombic unit cell along with the existence of many polymorphs. Here we demonstrate the epitaxial growth of single-crystalline T -Nb 2 O 5 thin films, critically with the ionic transport channels oriented perpendicular to the film’s surface. These vertical 2D channels enable fast Li-ion migration, which we show gives rise to a colossal insulator–metal transition, where the resistivity drops by 11 orders of magnitude due to the population of the initially empty Nb 4 d 0 states by electrons. Moreover, we reveal multiple unexplored phase transitions with distinct crystal and electronic structures over a wide range of Li-ion concentrations by comprehensive in situ experiments and theoretical calculations, which allow for the reversible and repeatable manipulation of these phases and their distinct electronic properties. This work paves the way for the exploration of novel thin films with ionic channels and their potential applications.

Chemistry↗

DOE OSTI2021

UCGretina geant4 simulation of the GRETINA Gamma-Ray Energy Tracking Array

UCGretina, a geant4 simulation of the GRETINA gamma-ray tracking array of highly-segmented high-purity germanium detectors is described. We have developed a model of the array, in particular of the Quad Module and the capsules, that gives good agreement between simulated and measured photopeak efficiencies over a broad range of gamma-ray energies and reproduces the shape of the measured Compton continuum. Both of these features are needed in order to accurately extract gamma-ray yields from spectra collected in in-beam gamma-ray spectroscopy measurements with beams traveling at v / c ≳0.3 at the National Superconducting Cyclotron Laboratory and the Facility for Rare Isotope Beams. In the process of developing the model, we determined that millimeter-scale layers of passive germanium surrounding the active volumes of the simulated crystals must be included in order to reproduce measured photopeak efficiencies. In conclusion, we adopted a simple model of effective passive layers and developed heuristic methods of determining passive-layer thicknesses by comparison of simulations and measurements for a single crystal and for the full array. Prospects for future development of the model are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2025

Mitigating CaCO 3 crystal nucleation and growth through continuous ion displacement via alternating electric fields

Mineral crystal formation poses a challenge on surfaces (e.g., heat exchangers, pipes, membranes, etc.) in contact with super-saturated fluids. Applying alternating currents (AC) to such surfaces can prevent surface crystallization under certain conditions. Here, we demonstrate that ion displacement induced by periodic charging and discharging of the electrical double layer (EDL) inhibits both heterogeneous and homogeneous nucleation (and crystal growth) of CaCO 3 . Titanium sheets (meant to simulate metallic heat exchanger surfaces) are immersed in super-saturated CaCO 3 solutions with a saturation index >11. We show that at relatively high AC frequencies, incomplete EDL formation leads to an alternating electric field that propagates far into the bulk solution, inducing rapid ion migration that overwhelms the Brownian motion of ions. Electrochemical characterization reveals EDL charging/discharging under AC conditions that greatly inhibits precipitation. Operating at 4 V pp , 0.1–10 Hz reduces turbidity by over 96% and reduces CaCO 3 coverage on the metal plates by over 92%. Based on electrokinetic and crystallization models, the ion displacement velocity (exceeding the mean Brownian velocity) and displacement length disrupts ion collision and crystal nucleation. Overall, the technique has potential for preventing mineral crystal formation in heat exchangers and many other industrially relevant systems.

42 ENGINEERING↗

DOE OSTI2020

Enhanced magnetization in proton irradiated Mn 3 Si 2 Te 6 van der Waals crystals

van der Waals (vdW) engineering of magnetism is a topic of increasing research interest in the community at present. We study themagnetic properties of quasi-two-dimensional layered vdW Mn 3 Si 2 Te 6 (MST) crystals upon proton irradiation as a function of fluences of 1 × 10 15 , 5 ×10 15 , 1 × 10 16 , and 1 × 10 18 H⁺/cm 2 . We find that the magnetization is significantly enhanced by 53% and 37% in the ferrimagnetic phase (at 50 K) when the MST crystal was irradiated with the proton fluence of 5 ×10 15 , both in ab and c planes, respectively.The ferrimagnetic ordering temperature and magnetic anisotropy are retained even after proton irradiation. From the fluence dependence of magnetization, electron paramagnetic resonance spectral parameters (g-value and signal width), and Raman data, we show that the magnetic exchange interactions (Mn–Te–Mn) are significantly modified at this fluence. This work shows that it is possible to employ protonirradiation in tuning the magnetic properties of vdW crystals and provide many opportunities to design desired magnetic phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Tuning the room temperature ferromagnetism in Fe 5 GeTe 2 by arsenic substitution

In order to tune the magnetic properties of the cleavable high-Curie temperature ferromagnet Fe$_{5-x}$GeTe 2 , the effect of increasing the electron count through arsenic substitution has been investigated. Small additions of arsenic (2.5% and 5%) seemingly enhance ferromagnetic order in polycrystalline samples by quenching fluctuations on one of the three magnetic sublattices, whereas larger As concentrations decrease the ferromagnetic Curie temperature (T C ) and saturation magnetization. Furthermore, this work also describes the growth and characterization of Fe 4.8 AsTe 2 single crystals that are structurally analogous to Fe$_{5-x}$GeTe 2 but with some phase stability complications. Magnetization measurements reveal dominant antiferromagnetic behavior in Fe 4.8 AsTe 2 with a Néel temperature of $T_{\textrm{N}} \approx$ 42 K. A field-induced spin-flop below T N results in a switch from negative to positive magnetoresistance, with significant hysteresis causing butterfly-shaped resistance loops. In addition to reporting the properties of Fe 4.8 AsTe 2 , this work shows the importance of manipulating the individual magnetic sublattices in Fe$_{5-x}$GeTe 2 and motivates further efforts to control the magnetic properties in related materials by fine tuning of the Fermi energy or crystal chemistry.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Two-Dimensional and Three-Dimensional Tetrel-Arsenide Frameworks Templated by Li and Cs Cations

Two new ternary tetrel pnictide phases, Li 1.08 Ge 4.92 As 7 and Cs 0.11 Zn 0.05 Si 0.95 As, have been synthesized. Both compounds crystallize in new structure types, which demonstrate the flexibility of Ge(Si)–As layers when accommodating electropositive cations of various sizes. Li 1.08 Ge 4.92 As 7 displays a Ge-As layer motif that has not been observed in ternary Ge-As systems, while Cs 0.11 Zn 0.05 Si 0.95 As exhibits a 3D framework composed of fragments of the 2D parent-phase SiAs. For Li 1.08 Ge 4.92 As 7 , a combination of computational modeling and solid-state 7 Li MAS NMR was used to establish the correct crystal structure with one mixed occupied Ge/Li site. The compositions of the phases were confirmed through energy-dispersive X-ray spectroscopy. Transport properties and UV–Vis spectroscopy reveal both reported compounds to be semiconductors. Cs 0.11 Zn 0.05 Si 0.95 As shows high thermal stability with congruent melting at 1300 K and an exceptionally low thermal conductivity of 0.5 W m –1 K –1 at 300 K. Temperature-dependent Li-ion hopping dynamics in Li 1.08 Ge 4.92 As 7 was characterized using 7 Li solid-state NMR.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Anisotropic magnetism and electronic structure of trigonal EuAl 2 Ge 2 single crystals

Understanding the interplay between magnetic and electronic degrees of freedom is of profound recent interest in different Eu-based magnetic topological materials. Here, we studied the magnetic and electronic properties of the layered Zintl-phase compound EuAl 2 Ge 2 crystallizing in the trigonal CaAl 2 Si 2 -type structure. We report zero-field neutron diffraction, temperature T - and magnetic-field H-dependent magnetic susceptibility χ(T, H), isothermal magnetization M(T, H), heat capacity C p (T, H), and electrical resistivity ρ(T, H) measurements, together with T-dependent angle-resolved photoemission spectroscopy (ARPES) measurements complemented with first-principle calculations. EuAl 2 Ge 2 undergoes second-order A-type antiferromagnetic (AFM) ordering below T N = 27.5(5) K, with the Eu moments (Eu 2+ , S = 7/2) aligned ferromagnetically in the ab plane while these layers are stacked antiferromagnetically along the c axis. The critical fields at which all moments become parallel to the field are 37.5(5) and 52.5(5) kOe for H ∥ ab and H ∥ c, respectively. The H = 0 magnetic structure consists of trigonal AFM domains associated with ab-plane magnetic anisotropy and a field-induced reorientation of the Eu spins in the domains is also evident at T = 2 K below the critical field H c1 = 2.5(1) kOe. The ρ(T) measurements reveal metallic behavior transforming into a slight resistivity increase on cooling towards T N . A pronounced loss of spin-disorder scattering is observed below T N . The ARPES results show that EuAl 2 Ge 2 is metallic both above and below T N , and the Fermi surface is anisotropic with two hole pockets at the zone center and one small electron pocket at each M point. In the AFM phase, we directly observe folded bands in ARPES due to the doubling of the magnetic unit cell along the c axis with an enhancement of quasiparticle weight due to the complex change in the coupling between the magnetic moments and itinerant electrons on cooling below T N . The observed electronic structure is well reproduced by first-principle calculations, which also predict the presence of nontrivial electronic states near the Fermi level in the AFM phase with Z 2 topological numbers 1;(000)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Reconfigurable Grating Diffraction Structural Color in Self-Assembled Colloidal Crystals

Self-assembled colloidal crystals display structural colors due to light diffracted from their microscale, ordered structure. This color arises due to Bragg reflection (BR) or grating diffraction (GD); the latter mechanism is much less explored than the former. Here the design space for generating GD structural color is identified and its relative advantages are demonstrated. Electrophoretic deposition is used to self-assemble crystals with fine crystal grains from colloids of diameter 1.0 µm. The structural color in transmission is tunable across the full visible spectrum. The optimum optical response—represented by both color intensity and saturation—is observed at low layer number (≤5 layers). The spectral response is well predicted by Mie scattering of the crystals. Taken together, the experimental and theoretical results demonstrate that vivid grating colors with high color saturation can be produced from thin layers of micron-sized colloids. These colloidal crystals extend the potential of artificial structural color materials.

42 ENGINEERING↗

DOE OSTI2021

Strain-relaxed tetragonal MAPbI 3 results in efficient mesoporous solar cells

In mesoporous organo-halide perovskite solar cells, the coexistence of tetragonal phase and cubic phase in the perovskite layer is found to result in strained crystal structure at the mesoporous TiO 2 (mp-TiO 2 )/perovskite heterointerface. This results in structural defects pinholes, grain boundaries, and interfacial porosity which is detrimental towards photovoltaic performance and device stability. The strain at the interface originates from the lattice mismatch between the mp-TiO 2 nanoparticles (NPs) and perovskite. Here, a transformative approach is demonstrated to realize relaxed and high purity tetragonal phase MAPbI 3 (RP) near the mp-TiO 2 interface region. This approach involves inserting a ~2 nm lattice matched buffer layer of cubic CsPbBr 3 between mp-TiO 2 NPs and MAPbI 3 , which serves as a template for epitaxial growth for top MAPbI 3 . As a result, the solar cell with relaxed MAPbI3 shows a power conversion efficiency (PCE) of 22.12% with significantly enhanced environmental, light, and thermal stability.

14 SOLAR ENERGY↗

DOE OSTI2025

Phase-stabilized 2D/3D hetero-bilayers via lattice matching for efficient and stable inverted solar cells

2D-on-3D (2D/3D) perovskite heterostructures with engineered energy landscapes offer the potential to realize efficient and stable inverted solar cells. However, managing the energy landscape using 2D perovskites with thicker inorganic layers n > 1 necessitates the usage of the chemically unstable methylammonium MA + . Here, we synthesized formamidinium (FA)-rich and pure-FA n = 3 Ruddlesden-Popper (RPP) and Dion-Jacobson perovskite (DJP) single crystals by identifying ligands with suitably lattice-matched organic and inorganic components of the 2D lattice. These crystals were translated onto 3D perovskites as capping layers, forming 2D/3D hetero-bilayers (HBs). Degradation studies revealed that HBs with butylammonium-based RPPs as capping layers rapidly phase segregate into non-perovskites under combined extrinsic stressors, compromising the underlying 3D layer, whereas FA-rich DJPs based on 3-aminomethylpiperidine retain their phase stability. The DJP HBs also possess a favorable energy landscape and electron transport at the 2D/3D interface, enabling inverted solar cells with a champion PCE of 25.33% and remarkable stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2023

Armor for Steel: Facile Synthesis of Hexagonal Boron Nitride Films on Various Substrates

Abstract While hexagonal boron nitride (hBN) has been widely used as a buffer or encapsulation layer for emerging electronic devices, interest in utilizing it for large‐area chemical barrier coating has somewhat faded. A chemical vapor deposition process is reported here for the conformal growth of hBN on large surfaces of various alloys and steels, regardless of their complex shapes. In contrast to the previously reported very limited protection by hBN against corrosion and oxidation, protection of steels against 10% HCl and oxidation resistance at 850 °C in air is demonstrated. Furthermore, an order of magnitude reduction in the friction coefficient of the hBN coated steels is shown. The growth mechanism is revealed in experiments on thin metal films, where the tunable growth of single‐crystal hBN with a selected number of layers is demonstrated. The key distinction of the process is the use of N 2 gas, which gets activated exclusively on the catalyst's surface and eliminates adverse gas‐phase reactions. This rate‐limiting step allowed independent control of activated nitrogen along with boron coming from a solid source (like elemental boron). Using abundant and benign precursors, this approach can be readily adopted for large‐scale hBN synthesis in applications where cost, production volume, and process safety are essential.

2D materials↗

DOE OSTI2022

Confined Growth of DNA-Assembled Superlattice Films

Here, we study the assembly of DNA-functionalized nanocubes under lateral confinement in microscale square trenches on a DNA-functionalized substrate. Microfocus small-angle X-ray scattering (SAXS) and scanning electron microscopy (SEM) are used to characterize the superlattices (SLs). The results indicate that nanocubes form simple-cubic SLs with square-prism morphology and a (100) out-of-plane orientation to maximize DNA bonding. In-plane, SLs align with the template, exposing their {100} side facets, and the degree of alignment depends on trench size. Interestingly, the distribution of in-plane orientations determined from SAXS and SEM do not agree, indicating that the internal and external structures of the SLs differ. To understand this discrepancy, X-ray ptychography is employed to image the internal structures of the SLs, revealing that SLs which appear to be single-crystalline in SEM may have subsurface grain boundaries, depending on trench size. SEM reveals that the SLs grow via nucleation and growth of randomly oriented domains, which then coalesce; this mechanism explains the observed dependence of alignment and defect structure on size. Interestingly, crystallization occurs via an unusual growth mode, whereby continuous SL layers grow on top of several misoriented islands. Overall, this work elucidates the effect of lateral confinement on the crystallization of DNA-functionalized nanoparticles and shows how X-ray ptychography can be used to gain insight into nanoparticle crystallization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Iridate Li8IrO 6 : An Antiferromagnetic Insulator

In this work, a polycrystalline iridate Li 8 IrO 6 material was prepared via heating Li 2 O and IrO 2 starting materials in a sealed quartz tube at 650 °C for 48 h. The structure was determined from Rietveld refinement of room-temperature powder neutron diffraction data. Li 8 IrO 6 adopts the nonpolar space group $R\bar{3}$ with Li atoms occupying the tetrahedral and octahedral sites, which is supported by the electron diffraction and solid-state 7Li NMR. This results in a crystal structure consisting of LiO 4 tetrahedral layers alternating with mixed IrO 6 and LiO 6 octahedral layers along the crystallographic c -axis. The +4 oxidation state of Ir 4+ was confirmed by near-edge X-ray absorption spectroscopy. An in situ synchrotron X-ray diffraction study of Li 8 IrO 6 indicates that the sample is stable up to 1000 °C and exhibits no structural transitions. Magnetic measurements suggest long-range antiferromagnetic ordering with a Néel temperature (TN) of 4 K, which is corroborated by heat capacity measurements. The localized effective moment $μ_{\text{eff}}$ (Ir) = 1.73 $μ_{\text{B}}$ and insulating character indicate that Li 8 IrO 6 is a correlated insulator. First-principles calculations support the nonpolar crystal structure and reveal the insulating behavior both in paramagnetic and antiferromagnetic states.

36 MATERIALS SCIENCE↗