Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

ISMIP6 Antarctica: a multi-model ensemble of the Antarctic ice sheet evolution over the 21st century

Abstract. Ice flow models of the Antarctic ice sheet are commonly used to simulate its future evolution in response to different climate scenarios and assess the mass loss that would contribute to future sea level rise. However, there is currently no consensus on estimates of the future mass balance of the ice sheet, primarily because of differences in the representation of physical processes, forcings employed and initial states of ice sheet models. This study presents results from ice flow model simulations from 13 international groups focusing on the evolution of the Antarctic ice sheet during the period 2015–2100 as part of the Ice Sheet Model Intercomparison for CMIP6 (ISMIP6). They are forced with outputs from a subset of models from the Coupled Model Intercomparison Project Phase 5 (CMIP5), representative of the spread in climate model results. Simulations of the Antarctic ice sheet contribution to sea level rise in response to increased warming during this period varies between −7.8 and 30.0 cm of sea level equivalent (SLE) under Representative Concentration Pathway (RCP) 8.5 scenario forcing. These numbers are relative to a control experiment with constant climate conditions and should therefore be added to the mass loss contribution under climate conditions similar to present-day conditions over the same period. The simulated evolution of the West Antarctic ice sheet varies widely among models, with an overall mass loss, up to 18.0 cm SLE, in response to changes in oceanic conditions. East Antarctica mass change varies between −6.1 and 8.3 cm SLE in the simulations, with a significant increase in surface mass balance outweighing the increased ice discharge under most RCP 8.5 scenario forcings. The inclusion of ice shelf collapse, here assumed to be caused by large amounts of liquid water ponding at the surface of ice shelves, yields an additional simulated mass loss of 28 mm compared to simulations without ice shelf collapse. The largest sources of uncertainty come from the climate forcing, the ocean-induced melt rates, the calibration of these melt rates based on oceanic conditions taken outside of ice shelf cavities and the ice sheet dynamic response to these oceanic changes. Results under RCP 2.6 scenario based on two CMIP5 climate models show an additional mass loss of 0 and 3 cm of SLE on average compared to simulations done under present-day conditions for the two CMIP5 forcings used and display limited mass gain in East Antarctica.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Separation of High Purity Oxygenated Aromatics from Catalytic Fast Pyrolysis Organic Streams

Thermochemical conversion of lignocellulosic biomass offers an attractive route to produce fuels and chemicals. Specifically, catalytic fast pyrolysis (CFP) oils have been shown to contain a high concentration of oxygenated aromatics, which can be isolated as value-added co-products. Purification of oxygenated aromatics can be a viable pathway to more economically competitive biorefineries, yet the isolation of highly pure coproduct streams remains technically challenging due to the high chemical heterogeneity of thermochemical process steams. Here, we demonstrate an industrially scalable process for isolating phenol, a widely used precursor to plastics, from CFP oil. Importantly, we leverage standard industrial processes, such as distillation, liquid-liquid extraction, and crystallization, to achieve phenol with 97% purity. In addition, the primary distillation of the CFP oil yielded several other fractions that contain chemicals with the potential to be isolated (e.g. cyclic ketones, cresols, and guaiacols). This work provides a technically feasible path to high purity oxygenated aromatics that has the potential to offset fuel production costs in a biorefinery.

09 BIOMASS FUELS↗
DOE OSTI2021

Anaerobic Digestion Implementation at Dairies in Colorado

Anaerobic digestion (AD) of animal manure to produce biogas (methane) fuel has a wide variety of environmental benefits to air and water quality in addition to reducing greenhouse gas (GHG) emissions. In addition, the resulting biogas fuel and digestate products can help meet the energy needs and provide revenue to the farm. This case study explores the potential benefits and drawbacks of implementing an AD system at the Aurora Organic Dairy (AOD) High Plains Complex in Gill, Colorado. The project is envisioned as digester located at the AOD Complex with a single feed stream of manure from the Complex. The project would be implemented by a third-party contractor who would build and operate the system and pay the dairy a fraction of the profits, in addition to providing by-products such as digestate solids and liquids for fertilizer.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Composition and method embodiments for plating metal coatings

Disclosed herein are embodiments of a coating composition and a method of using the same for forming metal coatings on substrates. In particular embodiments, the coating composition comprises a deep eutectic solvent and/or an ionic liquid; a metal precursor; an alkali metal salt; and an optional additive component. The coating composition and method embodiments disclosed herein provide durable, even, high-surface area coatings on various types of substrates and also can be used at low temperatures.

Hubbard, Lance R.↗
DOE OSTI2023

Irradiation and corrosion testing of laser powder bed fusion-manufactured materials in the AMMT program

The Advanced Materials and Manufacturing Technologies (AMMT) program operating under the Department of Energy Office of Nuclear Energy is accelerating the qualification and deployment of additively manufactured materials in advanced reactor environments. Laser powder bed fusion (LPBF) has emerged as a promising additive manufacturing technique to fabricate complex components with the potential of tailored material properties. In the nuclear industry, metal additive manufacturing can offer numerous advantages, such as reduced lead times, streamlined quality assurance, and cost-effective low-volume production of new and replacement components with conventional or novel materials and geometries. The rapid and effective qualification of the effect of processing variability on the performance and degradation of additively manufactured materials is essential for the deployment of these components into advanced reactor environments. As part of this effort, AMMT is performing irradiation and corrosion testing of several materials built by LPBF, including 316L and 316H stainless steels. Our efforts encompass neutron irradiation testing, ion irradiation testing, and advanced modeling to provide a robust technical basis for understanding the effect of process variability on materials degradation and developing a sound methodology for accelerated ion irradiation testing. We develop focused irradiation test plans that align well with risk-informed and technologically inclusive approaches to licensing. We will also discuss our plans and specific concerns for corrosion testing additively manufactured material, with a primary focus on molten salt and liquid sodium environments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Influence of Reservoir Convection on Heat Extraction with Closed-Loop Geothermal Systems

Over the past few years, advancements in closed-loop geothermal systems (CLGS), also called advanced geothermal systems (AGS), have sparked a renewed interest in these types of designs. CLGS have certain advantages over traditional and enhanced geothermal systems (EGS), including not requiring in-situ reservoir permeability, conservation of the circulating fluid, and allowing for different fluids, including working fluids directly driving a turbine at the surface. CLGS may be attractive in environments where water resources are limited, rock contaminants must be avoided, and stimulation treatments are not available (e.g., due to regulatory or technical reasons). Despite these advantages, CLGS have some challenges, including limited surface area for heat transfer and requiring long wellbores and laterals to obtain multi-MW output in conduction-only reservoirs. CLGS have been investigated in conduction-only systems. In this paper, we explore the impact of both forced and natural convection on the levels of heat extraction with a CLGS deployed in a hot wet rock reservoir. We bound potential benefits of convection by investigating liquid reservoirs over a range of natural and forced convective coefficients. Additionally, we investigate the effects of permeability, porosity, and geothermal temperature gradient in the reservoir on CLGS outputs. Reservoir simulations indicate that reservoir permeabilities of at least ~100 mD are required for natural convection to increase the heat output with respect to a conduction-only scenario. The impact increases with increasing reservoir temperature. When subject to a forced convection flow field, Darcy velocities of at least 10-7 m/s are required to obtain an increase in heat output.

advanced geothermal systems↗
DOE OSTI2025

Bridging material models across scales: An integrated approach to equation of state and molecular dynamics modeling of copper

New uncertainty-aware equation of state (EOS) and electrical conductivity (EC) models for copper have been developed. The multiphase EOS/EC models are fit to experimental solid/liquid EC isobar measurements as well as density-functional theory molecular dynamics (DFT-MD) EC calculations in both expanded and compressed regimes (0.1–16 g/ cm 3 ⁠). The liquid and solid EOS phases were fit to available experimental data along with additional DFT-MD data over the same range as the EC. Leveraging the DFT-MD data, a corresponding machine-learned interatomic potential (MLIAP) for copper was trained using genetic-algorithm optimization. The copper MLIAP was constrained by EOS shock points at high compressions. The final EOS bounded MLIAP proves to be stable over a large density range (approximately 0.1–20 g/ cm 3 ) with good agreement to an isothermal compression curve, shock Hugoniot, and liquid speed of sound measurements at high pressures (100s of GPa).

Acoustic measurements and instrumentation↗
DOE OSTI2025

Nonadditive CO 2 Uptake of Type II Porous Liquids Based on Imine Cages

Type II porous liquids can potentially exploit the fluidity of liquids and sorption properties of porous sorbents, yet CO 2 uptake in porous liquids is still poorly understood. Molecular simulations and experiments are used to examine CO 2 uptake by a prototypical porous liquid composed of porous organic cages (CC13) in 2′-hydroxyacetophenone (2′-HAP). The simulations are in reasonable agreement with experimental measurements of CO 2 solubility and provide unambiguous information on the partitioning of CO 2 within microenvironments in the liquid. Analysis of CO 2 dynamics is performed using these simulations, including assessing the self-diffusivity of CO 2 in both the neat solvent and porous liquid. This offers insights into the kinetics of CO 2 uptake and transport in type II porous liquids based on imine cages. Experiments with type II porous liquids formed by dissolving CC13 in three different size-excluded solvents show nonadditive CO 2 absorption relative to predictions based on ideal volume additivity. This nonadditive absorption behavior is also observed in simulations. Nonadditive CO 2 uptake is also demonstrated in type II porous liquids based on another imine-based porous cage, CC19.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Water, Ion, and Proton Dynamics and Interactions in Nanoconfined Systems

The research was directed at understanding the role that nanoconfinement has on the dynamics and structure of liquids confined in nanometer size structures. Experiments were conducted using ultrafast infrared methods. The methods were two dimensional infrared (2D IR) spectroscopy and polarization pump-probe (PSPP) experiments. In addition FT-IR spectroscopy was used. To augment the experimental work, high level molecular dynamics simulations of the systems were conducted. The system used for confinement were nanoporous silica with essentially monodispersed pores. Pores of different diameters were studies, i.e., 2.5 nm to 8 nm. Water and organic liquids were investigated. The experiments were performed on a vibrational probe molecule, i.e., the CN stretch of the anion SeCN-. The 2D IR experiments measured spectral diffusion, which directly reported on the structural dynamics of the confined liquids. 2D IR was also used to perform chemical exchange measurements, which observed the formation and dissociation of molecular complexes with surface silanols. The PSPP experiments measured orientational relaxation of the probe molecule as well as it vibrational lifetime. All of the observables depended on the diameter of the pores and the type of liquid. The simulations of the observables provided detailed structural information on the structure of the confined liquids and there interactions with the surfaces. In addition to the study of the confinement in nanopores, water in hydrogels was also studied. The same experimental methods were used along with MD simulations. It was found the influence of hydrogels on water did not come from confinement of the water in the hydrogel polymer network, but rather from the interactions of the water with the individual monomers that compose the polymer. In addition, the temperature dependence of a polymer/water system was tracked from below to above the lower critical solution temperature to observe the nature of the phase separated polymer and how water responded to the phase separation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Determination of Seven Organic Impurities in FD&C Yellow No. 6 by Ultra-High-Performance Liquid Chromatography

The U.S. Food and Drug Administration (FDA) batch certifies FD&C Yellow No. 6 (Y6) to ensure that the color additive meets requirements published in the Code of Federal Regulations (CFR), including specifications for seven organic manufacturing impurities consisting of two intermediates, a reaction by-product, an impurity originating from an intermediate, and three subsidiary colors. An ultra-high-performance liquid chromatography (UHPLC) method was developed and validated for determining seven organic impurities in Y6. For comparison, the currently used high-performance liquid chromatography (HPLC) method was also validated. The new UHPLC method uses a 1.7 µm particle size biphenyl column with aqueous ammonium formate and methanol as eluants. Analytes are identified by comparing their retention times and UV-visible spectra to those of reference standards. Calibration is performed in the presence of the dye matrix and analyte levels are determined from their peak areas. UHPLC and HPLC validation studies obtained linear calibration curves and excellent values for limits of detection, limits of quantitation, recovery, repeatability, and intermediate precision for all analytes. Survey analyses of 30 samples using the UHPLC and HPLC methods yielded results that were consistent within experimental error; however, the UHPLC method provided more accurate results for two analytes that coelute using the HPLC method. The UHPLC method satisfies the accuracy and precision requisites for routine certification of Y6. The UHPLC method is faster and generates less waste than the HPLC method while delivering better sensitivity, separation, and accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Physics of laser direct-drive liquid deuterium–tritium wetted foam capsules for inertial confinement fusion

Laser direct-drive liquid deuterium–tritium (DT) wetted foam capsules hold substantial promise for future advancements in inertial confinement fusion (ICF). For this new class of ICF capsules, additive manufacturing (AM) techniques are used to create low aspect ratio spherical shells of a low-density, foam-like CH lattice, which is wetted with cryogenic liquid DT. In the present paper, we discuss key physics issues intrinsic to ignition and burn propagation in laser direct drive wetted foam capsules. These include requirements on laser energy and power, implosion velocity, fuel adiabat, and initial density and dimensions of the CH lattice shell.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Structural and optical properties of nanoparticles formed by laser ablation of porous silicon in liquids: Perspectives in biophotonics

The paper discusses the possibility of manufacturing silicon nanoparticles, which are suitable for contrasting biological tissues imaged by optical coherence tomography, by femtosecond laser ablation of porous silicon in various liquids. The manufactured nanoparticles are characterised by average sizes of 87, 112, and 102 nm for cases of ablation in water, ethanol, and liquid nitrogen, respectively, as well as a relatively narrow size distribution, which provides additional advantages for subsequent delivery into biological tissues. Electrochemical etching, which results in the formation of layers of porous silicon, allows the yield of ablation products to be increased several-fold by lowering the ablation threshold, thereby increasing the light scattering efficiency of the prepared suspensions compared with the case of using crystalline silicon as targets. The possibility of obtaining high-contrast images of a biotissue phantom based on an agar gel with embedded nanoparticles is shown. The magnitude of the contrast depends on the liquid used for ablation and correlates with the values of the reduced scattering coefficient of the studied suspensions. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

IDAES-PSE 2.5.0 Release

The Institute for the Design of Advanced Energy Systems (IDAES) Integrated Platform is a versatile computational environment offering extensive process systems engineering (PSE) capabilities for optimizing the design and operation of complex, interacting technologies and systems. IDAES enables users to efficiently search vast, complex design spaces to discover the lowest cost, most environmentally sustainable solutions while supporting the full process modeling lifecycle, from conceptual design to dynamic optimization and control. The extensible, open platform empowers users to create models of novel processes and rapidly develop custom analyses, workflows, and end-user applications. IDAES-PSE 2.5.0 Release Highlights Upcoming Changes IDAES will be switching to the new Pyomo solver interface in the next release. Whilst this will hopefully be a smooth transition for most users, there are a few important changes to be aware of. The new solver interface uses a different version of the IPOPT writer (“ipopt_v2”) and thus any custom configuration options you might have set for IPOPT will not carry over and will need to be reset. By default, the new Pyomo linear presolver will be activated with ipopt_v2. Whilst are working to identify any bugs in the presolver, it is possible that some edge cases will remain. IDAES will begin deploying a new set of scaling tools and APIs over the next few releases that make use of the new solver writers. The old scaling tools and APIs will remain for backward compatibility but will begin to be deprecated. New Models, Tools and Features New diagnostics check for near-parallel variables and constraints. New diagnostics tools for identifying causes of infeasibility in models. New example for creating a custom model of a liquid-liquid extractor unit operation. Bug Fixes Fixed bug in Gibbs reactor that caused it to appear to have additional spurious degrees of freedom. Fixed bug in the Modular Property Framework that would cause errors when trying to use phase-based material balances with phase equilibria. Fixed bug in Modular Properties Framework that caused errors when initializing models with non-vapor-liquid phase equilibria. Testing and Robustness Deployed the IDAES Diagnostics Toolbox to confirm that there are no structural or numerical issues in the core model libraries. Additional robustness tests for core model, and some associated improvements in the converge tester class. Fixed a number of issues that were causing unexpected warnings to be emitted during testing. Deprecations and Removals Removed examples for RIPE tool which has not been supported for a number of releases.

AS↗
DOE OSTI2025

GLBRC Soil Yearlong Incubation 13C-SIP-Lipidomics

Data package for Lipids represent a dynamic, yet stable pool of microbially-derived soil carbon This data is published under a CC0 license. The authors encourage data reuse and request attribution by referencing the below citations for the data packages and associated manuscript. Please cite as: Rempfert KR, Bell SL, Kasanke CP, Kyle JE, Hofmockel KS. 2025. GLBRC Soil Yearlong Incubation 13C-SIP-Lipidomics. [Data Set] PNNL DataHub. doi: Rempfert KR, Bell SL, Kasanke CP, Kyle JE, Hofmockel KS. 2025. MSV000097435: GLBRC soil yearlong incubation 13C-SIP-Lipidomics [Data Set] MassIVE. doi:10.25345/C57659T3K Rempfert KR, Bell SL, Kasanke CP, Kyle JE, Hofmockel KS. 2025. Lipids represent a dynamic, yet stable pool of microbially-derived soil carbon. In Prep This data package consists of compound-specific 13C SIP-lipidomics data from a yearlong tracer incubation experiment designed to investigate microbial lipid persistence in switchgrass bioenergy crop soils. In order to explore how lipid structure may modulate the persistence of C in soil lipids, we leveraged soils from two sites (Michigan - sandy texture, Wisconsin - silty texture) operated by the U.S. Department of Energy-funded Great Lakes Bioenergy Research Center (GLBRC). These sites had comparable climates, identical management practices, but contrasting soil textures, allowing us to assess the variability of lipid accrual or degradation in soils as well as provide insight regarding the degree to which edaphic properties may regulate the retention of soil lipids. Untargeted lipidomics analyses were performed to identify 13C-labeled lipids in the soil microbiome after long-term incubation. Soils were supplemented with 100 micrograms glucose per gram dry soil (99 atom % 13C or natural abundance for paired control) and incubated; samples were collected two months and one year after glucose addition. Lipid extracts (MPLEx) were analyzed by LC-MS/MS and identified using LIQUID. Calculation of isotopic enrichment of lipids was performed by targeted approach using TarMet to quantify lipid isotopologues and IsoCorrectoR to correct for natural abundance isotopes. Contents: Data package contents reported here are the first version and contain downstream analysis files for the raw LC-MS mass spectrometry files (.mzXML) deposited at the MassIVE database repository under accession MSV000097435 (80 experimental runs; 5.85 GB) | MassIVE DOI: 10.25345/C57659T3K. Support files include the additional data download 'Read Me' file containing data descriptor information. Reported data download contents are structured for compliance with project data sharing guidelines, community standards initiatives, and sponsor stakeholder policies supporting FAIR data principles. Data processing software, analysis tools, and data workflows are listed below corresponding to the host repository long-term location. Available Data Downloads (0.3 GB): "GLBRC soil yearlong incubation 13C-SIP-Lipidomics_readme.txt" - 'Read Me' data package content file (txt) "GLBRC_DataPackage_analysis files" - Data processing files (Rmd) and saved intermediate data processing outputs (rds, csv, xlsx) "GLBRC_13C_lipidomics_dataset.xlsx" - processed data in tabular format (xlsx) Linked Software: LIQUID LC-MS Analysis Software | 10.5281/zenodo.6459462 Lipid Mini-On Software Tools | 10.5281/zenodo.1492803 pmartR Omics Statistical Software | 10.5281/zenodo.6108667 xcms (v4.3.3) TarMet (v1.1.1) IsoCorrectoR (1.24.0) Funding Acknowledgments: This research was supported by an Early Career Research Program award funded by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research (OBER) Genomic Science program under FWP 68292, FWP 07880 and EMSL Exploratory Research Project 51095. A portion of this work was performed in the William R. Wiley Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by OBER and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated by Battelle for the DOE under Contract DE-AC05-76RLO1830.

Rempfert, Kaitlin R [Pacific Northwest National La↗
DOE OSTI2022

A remarkable CHF of 345W/cm 2 is achieved in a wicked-microchannel using HFE-7100

Boiling heat transfer of dielectric fluids is a promising cooling technique for thermal management of microelectronic systems. However, the critical heat flux achievable is generally low, because of the poor thermophysical properties of these fluids. Here, to address this dilemma, we propose a new cooling concept to substantially enhance global liquid supply during phase-change process using enhanced capillary-driven force. Additionally, dedicated vapor pathways are designed among a bank of micro-pillars to facilitate vapor removal. In this work, new wicks comprised of silicon micro-pinfin arrays are explored to significantly enhance the flow boiling heat transfer performance. To examine the functionalities of this wick, experiments on HFE-7100 were carried out with mass velocities varying from 247 to 3,465 kg/m 2 s. To explore the enhancement mechanisms and to analyze the capillary-assisted flow boiling process, visualization studies were conducted. The results indicate that sustainable evaporation induced by wick microstructures and efficient liquid supply are the enhancement mechanisms compared to parallel microchannels with solid walls. It is found that the overall heat transfer coefficient is substantially increased up to 75%. Remarkably, a high critical heat flux (CHF) of approximately 345 W/cm 2 is recorded at G = 3,465 kg/m 2 s at coolant inlet temperature of ~20 °C. Equally importantly, this noticeable enhancement of CHF value is associated with drastically decreased pressure drops compared to microchannels decorated with μ-pinfin fences.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Phase-field model of alloy solidification far from chemical equilibrium at the solid-liquid interface

We further develop a recently introduced phase-field model of far-from-equilibrium alloy solidification under additive manufacturing conditions [K. Ji et al., Phys. Rev. Lett. 130, 026203 (2023)]. This model utilizes enhanced solute diffusivity within the spatially diffuse interface region to quantitatively capture solute trapping with a larger interface width, thereby making simulations on experimentally relevant length and timescales computationally feasible. The main developments presented here include testing the robustness of different variational formulations, extending the model to concentrated alloys by incorporating solid and liquid free energies from thermodynamic databases, as illustrated for hypoeutectic Al-Ag alloys with CALPHAD, extending convergence tests as a function of interface width to 3D, and carrying out simulations in both 2D and 3D to examine existing theories of microstructure development. Our results indicate that the simplest variational formulation that interpolates the bulk free-energy density between its solid and liquid forms is the most robust. Remarkably, for hypoeutectic Al-Ag alloys, this formulation yields a high-velocity nonequilibrium phase diagram that is independent of interface width, thereby demonstrating that the framework of enhanced solute diffusivity can be nontrivially extended to concentrated alloys. Other variational formulations have restricted ranges of materials or processing parameters that can be reliably modeled. We use 2D simulations to construct high-velocity microstructure selection maps for dilute Al-Cu alloys. The results validate the important role of latent heat rejection at the interface and extend the limited predictions of linear stability analysis [A. Karma and A. Sarkissian, Phys. Rev. E 47, 513 (1993)] and sharp-interface 1D simulations to fully nonlinear regimes. Furthermore, 3D simulations, carried out using a computationally tractable axisymmetric cellular/dendritic interface shape, demonstrate a good convergence similar to that observed in 2D as a function of interface width. Full 3D simulations, in turn, reveal that the standard theory of absolute stability is a good predictor of the upper critical velocity beyond which steady-state growth becomes unstable, despite the different morphological manifestations of this instability in 2D and 3D.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding Biases in Sample Preparation Techniques for Coupled Scanning Electron Microscopy and MAMA PuO 2 Morphological Analysis

In this project, the scanning electron microscopy (SEM) sampling method used during the statistical design study (SDS) was investigated to determine if any sampling biases were present in the analyzed data. Using standard particle size distribution powders from the National Institute of Standards and Technology (NIST 1984 standard reference material) with the origin wet dispersion method, it was determined that a bias to smaller particles was present. This was supported by theoretical calculations using Stokes’ law to determine the settling rate of spherical particles of roughly the same size and mass as those found in the SDS. Based on the theoretical calculations, it was determined that the settling rate for each of the 76 powder sets in the SDS could be unique based on specific particle shape and mass distributions, making a universal correction factor/formula not applicable. Therefore, priority shifted to developing an improved wet dispersion method that significantly reduced the particle settling rate for all particle size and shapes. This was achieved by replacing the original solvent (isopropyl alcohol) with a heavy liquid (lithium heteropolytungstates), which dramatically slowed the settling rate and allowed for the capture of a suitable homogeneous aliquot. SEM imaging and Morphological Analysis for Material Attribution (MAMA) software analysis were conducted on the NIST standard, and the SEM/MAMA data were compared to data captured by a dynamic image analysis particle size analyzer. The resulting data confirmed that the new wet dispersion method does indeed deliver an improved representative aliquot to the SEM stub. For instance, in the NIST certificate, the average particle size is ~17.1 µm ± 2.2 µm with a normal distribution. The initial wet dispersion method resulted in a drastically reduced average particle size of 6.1 µm in addition to a non-representative heavy bi-modal distribution whereas the improved LST wet dispersion method resulting in an average particle size that was much closer to the NIST certificate (12.7 µm) with a similar normal distribution. Although the improved method was still short of the NIST certificate average, atomic force microscopy analysis determined that the resulting ~20-25% reduction in size was due to particles sinking into the carbon sticky tape used for SEM imaging. It is believed that that this bias can be calibrated in a much more predicable manner than the original settling rate bias. In addition, the matching normal distribution curves between the NIST certificate and the heavy liquid method indicate a much-improved representative aliquot has been sampled and imaged. A surrogate CeO 2 powder was used to reflect PuO 2 more accurately and to aid in implementing radiological controls and shielding. The resulting data sets from the SEM/MAMA method and the particle size analyzer give almost identical average particle sizes and particle distribution statistics. Future work will re-analyze several select runs from the SDS to determine if morphological signatures can be found with the improved sampling method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Pressure-temperature equation of state of Al 2 ⁢O 3 up to 14 Mbar and 40 kK

Sapphire (Al 2 ⁢O 3 ), known for its remarkable incompressibility at ambient conditions, plays a pivotal role in both static and dynamic compression research. Accurately characterizing its equation of state (EoS) is essential for these applications. Here, we present a complete Hugoniot of Al 2 ⁢ O 3 as locus of experimentally assessed, high-precision, pressure, density and temperature states up to 14 Mbar and 43 kK. The Hugoniot is established with single shock experiments using magnetically launched hyper velocity flyers on the Z Accelerator at Sandia National Laboratories. We explore principal Hugoniot states at very high shock 𝑇 and 𝑝 in the solid phase, tracking the solid-liquid boundary and culminating at 2.4-fold compression, where data provides a direct constraint on the liquid phase. Corresponding shock release data probe thermodynamic states complementary to the Hugoniot and place additional constraints on tabular EoS models. Our findings indicate a significant deviation from existing tabular EoS models for Al 2 ⁢ O 3 dictating a comprehensive overhaul. We develop two advanced EoSs for Al 2 ⁢ O 3 the SESAME 97412 model, featuring an extensive phase diagram that includes three solid phases and the liquid phase, and the updated LEOS 2200m2 model. EoS development is assisted with Quantum Molecular Dynamics simulations. Our experimental data allows for stringent testing of our EoSs. Both models accurately capture the Hugoniot of Al 2 ⁢O 3 up to the highest pressures and temperatures. Rigorous experimental determination of extreme pressures and temperatures, paired with sophisticated models, advances the frontier of EoS development beyond 1 terapascal.

Kalita, Patricia [Sandia National Laboratories (SN↗