Search NASA⌕ Search

SEARCH · Search NASA

Results for “materials synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Synthesis of low color, atomic oxygen resistant polyimides

The purpose of this project was to develop low color, atomic oxygen resistant polyimides for potential applications on spacecraft in low earth orbit. The material is needed in order to protect satellites and spacecraft from the gases and radiation found at those altitudes. Phosphorous containing polyimides have been shown to be especially resistant to corrosion and weight loss under oxygen plasma. Unfortunately the color of these phosphorous containing polyimides is still too high for them to be good heat insulators. While they are not as effective as teflon, the current material of choice. polyimides are much less dense than teflon and would be especially valuable if they could be made with low color. The approach taken was to synthesize a monomer which would contain the elements needed for giving the final polyimide its desired properties. In particular the monomer should incorporate phosphine or phosphine oxides and have bulky side groups to block any color forming charge transfer structures. The target molecule, 3,5-di-(trifluoromethylphenyl)-bis(3-aminophenyl) phosphine oxide, (containing both a phosphine oxide group and a bulky ditrifluoromethylphenyl group) was synthesized via three reactions in overall yield of 21 percent. In addition, a model compound, bis(3-phenylamine) phenyl phosphine oxide, was synthesized two different ways in order to establish the conditions for the nitration of phosphine oxides and their reduction to the amine. Finally, a trisubstituted phosphine oxide was synthesized. In all, seven phosphorus containing organic compounds were synthesized, purified and characterized. The model compound was reacted with oxydiphthalic anhydride to form a polyamic acid with inherent viscosity of 0.34. This material was cast into a film and heated, forming a normally colored fairly strong polyimide with a Tg of 240 C. The target compound was reacted with 6-fluorodiphthalic anhydride to give a polyamic acid with inherent viscosity of 0.19 and cast to give a heavily cracked colored film with a Tg of 230 C.

MacInnes, Dave↗
NASA NTRSDate not supplied

Formation of Complex Organic Molecules (COMs) from Polycyclic Aromatic Hydrocarbons (PAHs): Top-Down Synthesis of organics in planetary systems

Complex, organic molecules have been found in many solar system objects (i.e., dust, comets, meteorites, moons, etc.); however, their origins and formation remain a mystery. Two chemical evolutionary pathways have been proposed to explain the organic inventory of our solar system. The first pathway, the top-down approach, suggests an interstellar (ISM) heritage whereby the organic material found in the solar system formed from the erosion and functionalization of large pre-solar carbon-bearing species (mainly large Polycyclic Aromatic Hydrocarbons or PAHs). The second pathway suggests that the origin of the Solar System prebiotic matter is the result of bottom-up synthesis from small reactive molecules (e.g., formaldehyde – H2CO, acetylene – H2C2, and similar species). In this second scenario, it is supposed that very few, if any, pre-solar large molecules could have survived due to the proto - solar nebula radiation environment. Polycyclic Aromatic Hydrocarbons or PAHs comprise ~20-30% of all available carbon in the Universe. The PAHs found within our Solar System tend to be smaller than those suspected to be in the ISM, comprised of only 14 to 18 carbon atoms in size whereas ISM PAHs are typically 50 to 100 carbon atoms. The disparity in PAH sizes between the ISM and Solar System environments is not understood, but may point to conversion of large ISM PAHs to Solar System Organics. This presentation details recent experiments regarding the stability of large PAHs to the various types of radiation found within a proto - solar disk and the production of smaller, complex, molecules from the degradation of the larger PAHs. The presentation will highlight differences and similarities in degradation products based on experimental conditions (e.g., radiation type) and discuss future work with a new experimental setup known as ICEE (Institute for Carbon Evolution Experiments).

molecukes↗
NASA NTRS1973

Ultraviolet selection pressure on the earliest organisms

It had been proposed by Sagan (1957, 1961) that UV light, partially penetrating the primitive reducing atmosphere of the earth, posed a major problem for the earliest evolution of life. This argument is now updated and refined. The picture of a secondary reducing atmosphere is presented. It is assumed that an excess of hydrogen from this atmosphere has already escaped to space. The genetic material surrounded itself as a solution to the UV selection pressure with bases or nucleotides having no function whatever in replication or protein synthesis.

Sagan, C.↗
NASA NTRS1990

An unmanned probe to Pluto

Now that Voyager II has completed its grand tour of the solar system, all the planets in the solar system, with the exception of Pluto, have been studied. Even now, missions to return to Mercury, Venus, Mars Jupiter, and Saturn are currently flying or are planned. However, a mission to explore Pluto is not, at the present time, being considered seriously. The design problem presented to the students was very general, i.e., design an unmanned mission to Pluto with a launch window constraint of the years 2000 to 2010. All other characteristics of the mission, such as mission type (flyby, orbiter, lander, penetrator), scientific objectives and payload, and the propulsion system were to be determined by the design teams. The design studies exposed several general problems to be solved. Due to the extreme distance to Pluto (and a corresponding travel time in the range of 10 to 25 years), the spacecraft had to be lighter and more robust than current spacecraft designs. In addition, advanced propulsion concepts had to be considered. These included the new generation of launch vehicles and upper stages and nuclear electric propulsion. The probe design offered an abundance of synthesis and analysis problems. These included sizing trade studies, selection of subsystem components, analysis of spacecraft dynamics, stability and control, structural design and material selection, trajectory design, and selection of scientific equipment. Since the characteristics of the mission, excluding the launch window, were to be determined by the design teams, the solutions varied widely.

Source record↗
NASA NTRS2014

Aeroelastic Tailoring of Transport Aircraft Wings: State-of-the-Art and Potential Enabling Technologies

This paper provides a brief overview of the state-of-the-art for aeroelastic tailoring of subsonic transport aircraft and offers additional resources on related research efforts. Emphasis is placed on aircraft having straight or aft swept wings. The literature covers computational synthesis tools developed for aeroelastic tailoring and numerous design studies focused on discovering new methods for passive aeroelastic control. Several new structural and material technologies are presented as potential enablers of aeroelastic tailoring, including selectively reinforced materials, functionally graded materials, fiber tow steered composite laminates, and various nonconventional structural designs. In addition, smart materials and structures whose properties or configurations change in response to external stimuli are presented as potential active approaches to aeroelastic tailoring.

Jutte, Christine↗
NASA NTRS1982

Synthesis of Perfluorinated Polymers

Long-chain perfluoropolyethers containing functional pendent groups were investigated as possible candidates for new sealants and elastomers that function in extreme environments. Of specific interest was development of materials exhibiting high thermal and oxidative stability at temperatures around 400 degrees C, low-temperature flexibility with glass transition at about 50 degrees C, and hydrolytic stability as well as compatibility with metals and resistance to fuels.

Rosser, R. W.↗
NASA NTRS1972

Transonic transport study: Economics

An economic analysis was performed to evaluate the impact of advanced materials, increased aerodynamic and structural efficiencies, and cruise speed on advanced transport aircraft designed for cruise Mach numbers of .90, .98, and 1.15. A detailed weight statement was generated by an aircraft synthesis computer program called TRANSYN-TST; these weights were used to estimate the cost to develop and manufacture a fleet of aircraft of each configuration. The direct and indirect operating costs were estimated for each aircraft, and an average return on investment was calculated for various operating conditions. There was very little difference between the operating economics of the aircraft designed for Mach numbers .90 and .98. The Mach number 1.15 aircraft was economically marginal in comparison but showed significant improvements with the application of carbon/epoxy structural material. However, the Mach .90 and Mach .98 aircraft are the most economically attractive vehicles in the study.

Smith, C. L.↗
NASA NTRS2011

Laboratory Studies of Fischer-Tropsch-Type Reactions and Their Implications for Organics in Asteroids and Comets

We have been studying Fischer-Tropsch type (FTT) reactions as a source for organic materials both in the gas phase of the solar nebula and incorporated into primitive comets and asteroids for almost 10 years, and over this time our concept has evolved greatly from the standard "catalytic" model to a much more robust chemical scenario. Our simulations have been conducted at temperatures that are much higher than we like, primarily for practical reasons such as the timescale of individual reactions, and we are just starting a series of measurements to allow us to measure reaction rates at temperatures from 873K down to as low as 373K. We have preliminary data on the carbon (d13C = -50) & nitrogen (d15N = +9.5) isotopic fractionation at 873K, but not on materials produced at lower temperature. Isotope values are on the VPDB scale for carbon and vs. Air for nitrogen. We have also investigated the noble gas trapping efficiency of the FTT process by adding a small amount of a noble gas mix to our standard synthesis mix. The noble gas ratio is 49:49:1:1::Ne:Ar:Kr:Xe. Xe and Kr are trapped at 873K and are more efficiently trapped at 673K with no isotopic fractionation at either temperature. Ar trapping is detected at 673K, but not at 873K. Ne has not yet been observed in our samples. The solar nebula was an extremely complex system, mixing materials from the innermost regions out to well into the zones where comets formed and thus mixing highly processed nebular materials with grains and coatings formed before the nebula began to collapse. Laboratory studies may provide the means to separate such diverse components based on carbon or nitrogen isotopic fractionation or the quantities of noble gases trapped in grain coatings and their thermal release patterns, among other observables. The ultimate goal of laboratory synthesis of nebular analogs is to provide the means to identifY the conditions under which natural samples were formed and the signatures of subsequent metamorphic events.

Nuth, Joseph↗
NASA NTRS2014

De Novo Synthesis and Functional Study of Primitive Polypeptides in the Prebiotic Protein World

DNA, RNA and proteins within a lipid-bound membrane are the core components of life, but the order of their appearance during the origin of life is still under debate. The widely accepted RNA World hypothesis states that RNA likely emerged prior to proteins and DNA since RNA can serve both replicative and catalytic roles. While biochemists have reproduced the synthesis, polymerization, and replication of nucleotides and RNA under controlled prebiotic conditions, it is clear that such complex organic molecules were are not present in significant amounts in the the starting prebiotic material on Earth either from endogenous production or meteoritic input. In contrast, amino acids are naturally abundant in various prebiotic contexts such as carbonaceous chondrites and Urey-Miller type experiments, and many studies have demonstrated that under plausible prebiotic conditions amino acids could condense or polymerize to give rise to short peptides. These findings support the basis of a Protein World hypothesis for life, however little has been done to study the functions of such primitive peptides. Here we present our novel synthetic biology-based approach to the de novo synthesis of billions of primitive peptidesproteins derived from a limited set of naturally abundant proteinogenic amino acids such as glycine, alanine, aspartic acid, glutamic acid, valine and serine. Of these peptides, the ones with divalent metal-binding capability are of particular interest and will be screened and identified. Certain divalent metals were likely present in prebiotic environments. Not only do they coordinate well with amino acids, but they also catalyze reactions, which are difficult to achieve in organic chemistry. Since D-chiral and non-proteinogenic amino acids are also abundant in the universe and may provide insight into the pathway by which life developed, we will also discuss methods to analyze primitive peptides consisting of these amino acids and D-chiral and non-proteinogenic amino acids. By understanding this naturalistic pathway, we will be able to better understand how life developed here on Earth. Since these amino acids are abundant in universe, this work provide insight into pathways by which life developed on Earth and, by extension, the probability of life arising elsewhere.

Fujishima, Kosuke↗
NASA NTRS1989

Synthesis of organic salts with large second-order optical nonlinearities

The variation of the anion counterion in the presently formulated organic salts, whose cation possesses large molecular hyperpolarizability, will in many cases yield materials with large powder second-harmonic generation efficiencies. The highest such efficiency is three orders of magnitude greater than that of the urea used as a reference compound. It is demonstrated that such nonconventional donors as Br(-) and the pyrenyl moiety can be incorporated into molecules which, in the requisite crystallographic environment, will exhibit substantial bulk susceptibilities.

Marder, Seth R.↗
NASA NTRS1978

Polyimide adhesives for titanium and composite bonding

Approach results in synthesis of addition polyimide adhesives with exceptional high temperature capabilities that show excellent potential for bonding titanium metal, polyimide/graphite composites, and combinations of these materials. Adhesives compatible with materials used in high performance aircraft and spacecraft structures also prove highly desirable in many other applications involving similar adherents.

St. Clair, A. K.↗
NASA NTRS1992

International Congress on Recent Developments in Air- and Structure-Borne Sound and Vibration, 2nd, Auburn Univ., AL, Mar. 4-6, 1992, Proceedings. Vols. 1-3

The papers presented in this volume cover a variety of topics, including sound intensity, structural intensity, modal analysis and synthesis, statistical energy analysis and energy methods, passive and active damping, and boundary element methods. Attention is also given to diagnostics and condition monitoring, material characterization and nondestructive evaluation, active noise and vibration control, sound radiation and scattering, and finite element analysis.

Crocker, Malcolm J.↗
NASA NTRS1994

Environmentally sound manufacturing

The NASA/Thiokol/industry team has developed and started implementation of an environmentally sound manufacturing plan for the continued production of solid rocket motors. They have worked with other industry representatives and the U.S. Environmental Protection Agency to prepare a comprehensive plan to eliminate all ozone depleting chemicals from manufacturing processes and to reduce the use of other hazardous materials used to produce the space shuttle reusable solid rocket motors. The team used a classical approach for problem solving combined with a creative synthesis of new approaches to attack this problem. As our ability to gather data on the state of the Earth's environmental health increases, environmentally sound manufacturing must become an integral part of the business decision making process.

Caddy, Larry A.↗
NASA NTRS1997

Single Crystal Synthesis and STM Studies of High Temperature Superconductors

This is a final report for the work initiated in September of 1994 under the grant NAG8-1085 - NASA/OMU, on the fabrication of bulk and single crystal synthesis, specific heat measuring and STM studies of high temperature superconductors. Efforts were made to fabricate bulk and single crystals of mercury based superconducting material. A systematic thermal analysis on the precursors for the corresponding oxides and carbonates were carried out to synthesized bulk samples. Bulk material was used as seed in an attempt to grow single crystals by a two-step self flux process. On the other hand bulk samples were characterized by x-ray diffraction, electrical resistivity and magnetic susceptibility, We studied the specific heat behavior in the range from 80 to 300 K. Some preliminary attempts were made to study the atomic morphology of our samples. As part of our efforts we built an ac susceptibility apparatus for measuring the transition temperature of our sintered samples.

Barrientos, Alfonso↗
NASA NTRS2002

Prebiotic Synthesis from CO Atmospheres: Implications for the origins of life

Most models of the primitive atmosphere around the time life originated suggest that the atmosphere was dominated by carbon dioxide, largely based on the notion that the atmosphere was derived via volcanic outgassing, and that those gases were similar to those found in modern volcanic effluent. These models tend to downplay the possibility of a strongly reducing atmosphere, which had been thought to be important for prebiotic synthesis and thus the origin of life. However, there is no definitive geologic evidence for the oxidation state of the early atmosphere and bioorganic compounds are not efficiently synthesized from CO2 atmospheres. In the present study, it was shown that a CO-CO2-N2-H2O atmosphere can give a variety of bioorganic compounds with yields comparable to those obtained from a strongly reducing atmosphere. Atmospheres containing carbon monoxide might therefore have been conducive to prebiotic synthesis and perhaps the origin of life. CO-dominant atmospheres could have existed if the production rate of CO from impacts of extraterrestrial materials were high or if the upper mantle had been more reduced than today.

Meyer, Michael↗
NASA NTRS2009

NASA Composite Materials Development: Lessons Learned and Future Challenges

Composite materials have emerged as the materials of choice for increasing the performance and reducing the weight and cost of military, general aviation, and transport aircraft and space launch vehicles. Major advancements have been made in the ability to design, fabricate, and analyze large complex aerospace structures. The recent efforts by Boeing and Airbus to incorporate composite into primary load carrying structures of large commercial transports and to certify the airworthiness of these structures is evidence of the significant advancements made in understanding and use of these materials in real world aircraft. NASA has been engaged in research on composites since the late 1960 s and has worked to address many development issues with these materials in an effort to ensure safety, improve performance, and improve affordability of air travel for the public good. This research has ranged from synthesis of advanced resin chemistries to development of mathematical analyses tools to reliably predict the response of built-up structures under combined load conditions. The lessons learned from this research are highlighted with specific examples to illustrate the problems encountered and solutions to these problems. Examples include specific technologies related to environmental effects, processing science, fabrication technologies, nondestructive inspection, damage tolerance, micromechanics, structural mechanics, and residual life prediction. The current state of the technology is reviewed and key issues requiring additional research identified. Also, grand challenges to be solved for expanded use of composites in aero structures are identified.

Tenney, Darrel R.↗