Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Plastic deformation mechanism of calcium-silicate hydrates determined by deviatoric-stress Raman spectroscopy

Highlights: • C-(A-)S-H samples under stress were characterized at the bond and grain level. • Small angle scattering showed that 720 MPa reduced grain thickness by 30%. • In-situ Raman showed that cross-linked C-A-S-H slips along its intralayer. • However, in-situ Raman showed that C-S-H slips along the interlayer. • In-situ Raman also showed a growth in CaCO{sub 3}, indicating fracture in both samples. Creep of the cement matrix affects the structural stability of concrete. In Portland cements, the creep is largely controlled by the binding phase calcium-(aluminum-)silicate-hydrate, or C-(A-)S-H. This phase has a lamellar structure and under deviatoric stress aligns its c-axis with the principal stress. However, the limiting resistance to this reorientation is unknown at the nanocrystalline level. Small-angle X-ray scattering shows that the lamellae thickness decreases under 100's MPa deviatoric stress. Deviatoric stress Raman spectroscopy shows that there are two ways that this break-up can occur. If the material's silicate chains are cross-linked, then strain in SiO bonds does not increase above certain stresses, indicating a relaxation adjacent to the SiO bond. If the chains are not cross-linked, then the silicate chains are broken up by rastering against each other, introducing defects. These results show that the plastic deformation of C-(A-)S-H is relevant for Portland cement creep.

36 MATERIALS SCIENCE↗

Optical absorption and TEM studies of silver nanoparticle embedded BaO-CaF{sub 2}-P{sub 2}O{sub 5} glasses

Silver nanoparticle embedded 30BaO-20CaF{sub 2}-50P{sub 2}O{sub 5}-4Ag{sub 2}O-4SnO glasses were prepared by melt-quenching and subsequent heat treatment process. Silver-doped glasses were heat treated at temperatures 500 °C, 525°C and 550 °C for a fixed duration of 10 hours to incorporate metal nanoparticles into the glass matrix. Appearance and shift in peak positions of the surface plasmon resonance (SPR) bands in the optical absorption spectra of heat treated glass samples indicated that both formation and growth of nanoparticle depended on heat treatment temperature. Glass sample heat treated at 525 °C showed a SPR peak around 3 eV, which indicated that spherical nanoparticles smaller than 20 nm were formed inside the glass matrix. Whereas sample heat treated at 550 °C showed a size dependent red shift in SPR peak due to the presence of silver nanoparticles of size larger than 20 nm. Size of the nanoparticles calculated using full-width at half-maximum (FWHM) of absorption band showed a good agreement with the particle size obtained from transmission electron microscopy (TEM) analysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Generalized Adjoint Approach for Quantifying Reflector Assembly Discontinuity Factor Uncertainties

Sensitivity-based uncertainty analysis of assembly discontinuity factors (ADFs) can be readily performed using adjoint methods for infinite lattice models. However, there is currently no adjoint-based methodology to obtain uncertainties for ADFs along an interface between a fuel and reflector region. To accommodate leakage effects in a reflector region, a 1D approximation is usually made in order to obtain the homogeneous interface flux required to calculate the ADF. Within this 1D framework an adjoint-based method is proposed that is capable of efficiently calculating ADF uncertainties. In the proposed method the sandwich rule is utilized to relate the covariance of the input parameters of 1D diffusion theory in the reflector region to the covariance of the interface ADFs. The input parameters covariance matrix can be readily obtained using sampling-based codes such as XSUSA or adjoint-based codes such as TSUNAMI. The sensitivity matrix is constructed using a fixed-source adjoint approach for inputs characterizing the reflector region. An analytic approach is then used to determine the sensitivity of the ADFs to fuel parameters using the neutron balance equation. A stochastic approach is used to validate the proposed adjoint-based method.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Theoretical realization of three-dimensional nanolattice structure fabrication based on high-order waveguide-mode interference and sample rotation

A theoretical method of using high-order waveguide-mode interference combined with sample rotation is proposed to fabricate different kinds of three-dimensional nanolattice structures. The lithography sample is assisted by an asymmetric metal-cladding dielectric waveguide structure. High-order waveguide modes can be excited in the photoresist layer by both transverse magnetic and transverse electric polarized light. By utilizing multiple exposures of high-order waveguide-mode interference combined with sample-rotation, various three-dimensional nanolattice structures can be obtained. The resulting optical field distributions are simulated using the finite element method in this study, and sample rotation is expressed by coordinate matrix transformation. As examples, the three-dimensional optical field distributions resulting from fifth-order waveguide-mode interference were simulated with 90° and 60° sample rotations and multiple exposures. The results show that a quasi-cuboid structure with a simple tetragonal arrangement and a quasi-hexagonal structure with a hexagonal close-packed lattice can be obtained. Moreover, the numerical simulation results revealed that the shapes, sizes, arrangements, and periods of the structures can be controlled by the rotation method, photoresist thickness, waveguide modes used for exposure, and so on.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The impacts of effective stress and CO 2 sorption on the matrix permeability of shale reservoir rocks [The impacts of CO 2 sorption and effective stress on the matrix permeability of shale reservoir rocks]

We assess the impacts of effective stress and CO 2 sorption on the bedding-parallel matrix permeability of the Utica shale through pressure pulse-decay experiments. We first measure permeability using argon at relatively high (14.6 MPa) and low (2.8 MPa) effective stresses to assess both pressure dependence and recoverability. We subsequently measure permeability using supercritical CO 2 and again using argon to assess changes due to CO 2 sorption. We find that injection of both argon and supercritical CO 2 reduces matrix permeability in distinct fashion. Samples with permeability higher than 10 –20 m 2 experience a large permeability reduction after treatment with argon, but a minor change after treatment with supercritical CO 2 . However, samples with permeability lower than this threshold undergo a slight change after treatment with argon, but a dramatic reduction after treatment with supercritical CO 2 . These results indicate that effective stress plays an important role in the evolution of relatively permeable facies, while CO 2 sorption dominates the change of ultra-low permeability facies. The permeability reduction due to CO 2 sorption varies inversely with initial permeability, which suggests that increased surface area from hydraulic stimulation with CO 2 may be counteracted by sorption effects in ultra-low permeability facies. As a result, we develop a conceptual model to explain how CO 2 sorption induces porosity reduction and volumetric expansion to constrict fluid flow pathways in shale reservoir rocks.

58 GEOSCIENCES↗

Incremental nonnegative matrix factorization based on correlation and graph regularization for matrix completion

Matrix factorization is widely used in recommendation systems, text mining, face recognition and computer vision. As one of the most popular methods, nonnegative matrix factorization and its incremental variants have attracted much attention. The existing incremental algorithms are established based on the assumption of samples are independent and only update the new latent variable of weighting coefficient matrix when the new sample comes, which may lead to inferior solutions. To address this issue, we investigate a novel incremental nonnegative matrix factorization algorithm based on correlation and graph regularizer (ICGNMF). The correlation is mainly used for finding out those correlated rows to be updated, that is, we assume that samples are dependent on each other. We derive the updating rules for ICGNMF by considering the correlation. We also present tests on widely used image datasets, and show ICGNMF reduces the error by comparing other methods.

Zhang, Xiaoxia↗

Emission spectrometric arcing procedure with minimal effect of chemical form of sample

This paper describes a study of matrix effects related to the chemical form of materials analyzed. The study was made using an arc in argon buffered with silver chloride. The effect of chemical form was minimal for a variety of metals, oxides, and carbides representing the most refractory compounds and thermally stable metal-containing molecules. Among these, only four of the most refractory materials known showed significant emission depressions due to incomplete volatilization in the arc system. These results are discussed in terms of vapor pressure of the solid materials placed on the anodes and dissociation reactions of the molecules in the gaseous environment.

Gordon, W. A.↗

Role of interfacial carbon layer in the thermal diffusivity/conductivity of silicon carbide fiber-reinforced reaction-bonded silicon nitride matrix composites

Experiments were carried out on samples of reaction-bonded silicon nitride uniaxially reinforced by SiC monofilaments with and without a 3-micron-thick carbon-rich coating. It is found that a combination of a carbon coatings on the fibers and an interfacial gap due to the thermal expansion mismatch in the composite can significantly (by a factor of 2) lower the effective thermal diffusivity in the direction transverse to the fiber. At atmospheric pressure, gaseous conduction across the interfacial gap makes a significant contribution to the heat transfer across the interface, indicated by significantly lower values of the effective thermal diffusivity under vacuum than in nitrogen or helium at atmospheric pressure.

Bhatt, Hemanshu↗

The effects of undersampling on multipolarization SAR images

The scattering matrix and Stokes matrix formats for multipolarization synthetic aperture radar (SAR) images are introduced. The effects of converting to the Stokes matrix format, without first doubling the sampling rate to allow for the conversion from a complex to an intensity format is quantified and discussed. It is shown that for most applications the Stokes matrix format is acceptable, since errors introduced by undersampling tend to average out when large numbers of pixels are averaged. For those applications requiring analysis of single image pixels, the scattering matrix format is recommended.

Freeman, A.↗

μSR study of Eu{sub 0.8}Ce{sub 0.2}Mn{sub 2}O{sub 5} and EuMn{sub 2}O{sub 5} multiferroics

A comparative μSR study of ceramic samples of the EuMn{sub 2}O{sub 5} and Eu{sub 0.8}Ce{sub 0.2}Mn{sub 2}O{sub 5} multiferroics is performed in the temperature range from 15 to 300 K. It is found that the Ce doping of the EuMn{sub 2}O{sub 5} sample slightly reduces the temperature of the magnetic phase transition from T{sub N} = 45 K for the EuMn{sub 2}O{sub 5} sample to T{sub N} = 42.5 K for the Eu{sub 0.8}Ce{sub 0.2}Mn{sub 2}O{sub 5} sample. Below the temperature T{sub N} for both samples, there are two types of localization of a thermalized muon with different temperature dependences of the precession frequency of the magnetic moment of the muon in an internal magnetic field. The higher frequency in both samples refers to the initial antiferromagnetic matrix. The behavior of this frequency in Eu{sub 0.8}Ce{sub 0.2}Mn{sub 2}O{sub 5} follows the Curie–Weiss law with the exponent β = 0.29 ± 0.02, which differs from the value β = 0.39 standard for 3D Heisenberg magnetics and is observed in EuMn{sub 2}O{sub 5}, because of the strong frustration of the doped sample. The temperature-independent low frequency is due to the presence of Mn{sup 3+}–Mn{sup 4+} ferromagnetic pairs located along the b axis of the antiferromagnetic matrix and in the regions of phase separation, which contain such ion pairs and e{sub g} electrons recharging them. In both samples, polarization losses are the same (about 20%) and are associated with the formation of Mn{sup 4+}–Mn{sup 4+} + Mu complexes near Mn{sup 3+}–Mn{sup 4+} ferromagnetic pairs. In the temperature interval from 25 to 45 K, the separation of the Eu{sub 0.8}Ce{sub 0.2}Mn{sub 2}O{sub 5} structure into two fractions where the relaxation rates of polarization of muons differ by an order of magnitude is revealed. This effect is due to a change in the state of regions of phase separation (1D superlattices) at the indicated temperatures. Such effect in EuMn{sub 2}O{sub 5} is significantly weaker.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of the Single Top Quark Production Cross Section in 1.96-TeV Proton-Antiproton Collisions

Top quarks are predominantly produced in pairs via the strong interaction in $\bar{p}$p collisions at √s = 1.96 TeV . The top quark has a weak isospin 1/2, composing a weak isospin doublet with the bottom quark. This characteristic predicts not only top quark pair production via strong interaction but also single production together with a bottom quark via weak interaction. However, finding single top quark production is challenging since it is rarely produced (σ singletop = 2.9 pb) against background processes with the same final state like W+jets and t$\bar{t}$. A measurement of electroweak single top production probes the W-t-b vertex, which provides a direct determination of the Cabbibo-Kobayashi-Maskawa (CKM) matrix element |V tb |. The sample offers a source of almost 100% polarized top quarks. This thesis describes an optimized search for s-channel single top quark production and a measurement of the single top production cross section using 2.7 fb -1 of data accumulated with the CDF detector. We are using events with one high-p T lepton, large missing E T and two identified b-quark jets where one jet is identified using a secondary vertex tagger, called SecVtx, and the other jet is identified using SecVtx or a jet probability tagger, called JetProb. In this analysis we have developed a kinematics fitter and a likelihood-based separator between signal and background. As a result, we found that the probability (p-value) that the candidate events originate from a background fluctuation in the absence of single top s-channel production is 0.003, which is equivalent to 2.7 σ deviations in Gaussian statistics, and this excess corresponds to the single top s-channel cross section of 2.38 -0.84 +1.01 pb. An observed value of |V tb | is 1.43 -0.26 +0.38 (experimental) ± 0.11(theory). We also set the 95% CL. upper limit of σ s = 4.15 pb for the s-channel production cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A versatile apparatus for the fine-tuned synthesis of cluster-based materials

In this paper, a custom-designed experimental setup for the fine-tuned synthesis of various cluster–based materials is presented. Providing custom-designed deposition stages and special sample holders it offers a high degree of control over the sample characteristics such as the cluster size, cluster amounts, and sample homogeneity in combination with high sample purity. The system is capable of producing thin films of pure clusters and various cluster-matrix combinations with cluster sizes ranging from single atoms up to aggregates of several thousand atoms. Two custom-designed deposition stages are available, one utilizes the full cluster beam, yielding micrograms of pure clusters within a few hours and the second one uses mass-separated clusters (mass-resolution between 2% and 10%), yielding nanograms of pure clusters in the same timescale. Furthermore, at the second deposition stage, a variety of matrix materials can be co-deposited at a controlled sample temperature between 153 K and 673 K. In order to prove the capabilities of the apparatus, a series of experiments with Fe clusters embedded in Ag matrices with different volume fractions of clusters were carried out. Energy dispersive X-ray spectroscopy measurements revealed that the amount of deposited clusters as well as the sample homogeneity can be controlled with an outstanding accuracy of 10%. Additional measurements of the magnetic properties indicated the presence of separated clusters for volume fractions of clusters around 2 volume percent (vol. %), while above this concentration (10 vol. %) a partial aggregation of the clusters was observed. It was also shown that the resulting thin films are nearly oxygen free, which ascertains that oxygen sensitive materials can be safely handled in this newly developed apparatus.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Apollo 14 revisited, or breccias aren't so bad after all

A study of large Apollo 14 samples suggests that they were formed by the same processes which formed the impactites found at Apollo 16 and 17 and in terrestrial craters, especially those in crystalline targets. The abundant crystalline matrix breccias of the Apollo 14 samples generally show higher clast contents and less refractory clast populations than the clast-laden impact melts abundant at the other Apollo nonmare landing sites. The Apollo 14 characteristics are attributed to the mixing of a greater amount of cold clastic debris into the superheated melt formed during impacts. The other major lithology at Apollo 14, the vitric matrix breccias, are made in part from agglutinate-bearing soil and cannot be the protolith of crystalline matrix breccias, because of differences in structure and composition. Variations among the breccias indicate the occurrence of several impact events.

Simonds, C. H.↗

Efficient Langevin dynamics for “noisy” forces

Efficient Boltzmann-sampling using first-principles methods is challenging for extended systems due to the steep scaling of electronic structure methods with the system size. Additionally, stochastic approaches provide a gentler system-size dependency at the cost of introducing “noisy” forces, which could limit the efficiency of the sampling. When the forces are deterministic, the first-order Langevin dynamics (FOLD) offers efficient sampling by combining a well-chosen preconditioning matrix S with a time-step-bias-mitigating propagator [G. Mazzola and S. Sorella, Phys. Rev. Lett. 118, 015703 (2017)]. However, when forces are noisy, S is set equal to the force-covariance matrix, a procedure that severely limits the efficiency and the stability of the sampling. Here, we develop a new, general, optimal, and stable sampling approach for FOLD under noisy forces. We apply it for silicon nanocrystals treated with stochastic density functional theory and show efficiency improvements by an order-of-magnitude.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Latest developments in seismic texture analysis for subsurface structure, facies, and reservoir characterization: A review

In exploration geology and geophysics, seismic texture is still a developing concept that has not been sufficiently known, although quite a number of different algorithms have been published in the literature. This paper provides a review of the seismic texture concepts and methodologies, focusing on latest developments in seismic amplitude texture analysis, with particular reference to the gray level co-occurrence matrix (GLCM) and the texture model regression (TMR) methods. The GLCM method evaluates spatial arrangements of amplitude samples within an analysis window using a matrix (a two-dimensional histogram) of amplitude co-occurrence. The matrix is then transformed into a suite of texture attributes, such as homogeneity, contrast, and randomness, which provide the basis for seismic facies classification. The TMR method uses a texture model as reference to discriminate among seismic features based on a linear, least-squares regression analysis between the model and the data within an analysis window. By implementing customized texture model schemes, the TMR algorithm has the flexibility to characterize subsurface geology for different purposes. A texture model with a constant phase is effective at enhancing the visibility of seismic structural fabrics, a texture model with a variable phase is helpful for visualizing seismic facies, and a texture model with variable amplitude, frequency, and size is instrumental in calibrating seismic to reservoir properties. Preliminary test case studies in the very recent past have indicated that the latest developments in seismic texture analysis have added to the existing amplitude interpretation theories and methodologies. These and future developments in seismic texture theory and methodologies will hopefully lead to a better understanding of the geologic implications of the seismic texture concept and to an improved geologic interpretation of reflection seismic amplitude

58 GEOSCIENCES↗

Effect of the Laser Scan Rate on the Microstructure, Magnetic Properties, and Microhardness of Selective Laser-Melted FeSiB

FeSiB alloys have been fabricated by selective laser melting (SLM) using a laser scan rate of 0.1–1.5 m/s, laser power of 90 W, scan line spacing of 40 μ m, and layer thickness of 50 μ m. X-ray diffraction, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, atomic force microscopy, profilometer, microdurometer, and vibrating sample magnetometer have been used to investigate the structural, microstructural, roughness, microhardness, and magnetic property changes during the laser melting process. The produced samples exhibit a nanocomposite structure consisting of nanocrystalline α-Fe{sub 0.95}Si{sub 0.05} and Fe{sub 2}B phases embedded into an amorphous ε-FeSi-type matrix. The selective laser-melted samples show high density, low surface roughness, higher microhardness values (1654–2273 Hv), and soft magnetic properties (M{sub s} = 188.6–199 emu/g and H{sub c} = 43.8–73 Oe).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determining P, S, Br, and I content in uranium by triple quadrupole inductively coupled plasma mass spectrometry

The trace impurities of a uranium ore concentrate (UOC) can be examined to determine mine source, methods of production, and quality. This study presents a method to determine the concentration of halides and main group elements, specifically P, S, Br and I, utilizing triple quadrupole inductively coupled plasma–mass spectrometry. These analytes were measured in a uranium matrix to simulate a UOC sample. The concentrations determined with this method showed agreement with known values. Solutions with and without uranium were compared. A UOC certified reference material, CUP-2, was analyzed to further demonstrate the effectiveness of the method.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Effectiveness of the metal coating on U–7Mo dispersion fuel in Al during irradiation

The effectiveness of a transition metal coating layer as a diffusion barrier between the UMo and matrix Al was examined. The samples were cut from KAERI-made U-Mo/Al dispersion miniplates containing 8 gU/cm 3 fuel meat. Mo, W and Zr were included as coating candidates. A physical vapor deposition (PVD) method was used to produce about a 0.2-mu m thick coating layer on the UMo. An Al protection coating layer was subsequently applied to protect the main coating layer. The samples were irradiated at the ATLAS facility in Argonne National laboratory with 84-MeV Xe 26+ ions, with the beam current of 200 particles nano ampere (pnA), to achieve a final dose of 2.7x10 17 ions/cm 2 . Post-irradiation examinations included focused ion beam (FIB), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Furthermore, among the coating metals, Mo showed the highest survival during the fuel plate fabrication and endurance during irradiation, which was consistent with the pre-irradiation thermodynamics evaluation. This result also emphasized the importance of the Al protection layer.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗