SEARCH · Search NASA

Results for “mesoscale analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS2014

Diagnosing Meteorological Conditions Associated with Sprites and Lightning with Large Charge Moment Changes (CMC) over Oklahoma

Sprites are a category of Transient Luminous Events (TLEs) that occur in the upper atmosphere above the tops of Mesoscale Convective Systems (MCSs). They are commonly associated with lightning strokes that produce large charge moment changes (CMCs). Synergistic use of satellite and radar-retrieved observations together with sounding data, forecasts, and lightning-detection networks allowed the diagnosis and analysis of the meteorological conditions associated with sprites as well as large-CMC lightning over Oklahoma. One goal of the NASA-funded effort reported herein is the investigation of the potential for sprite interference with aerospace activities in the 20- 100km altitude range, including research balloons, space missions and other aviation transports.

Rivera, Lizxandra Flores↗

DOE OSTI2025

Environmental Conditions Affecting Global Mesoscale Convective System Occurrence

Abstract The ERA5 environments of mesoscale convective systems (MCSs), tracked from satellite observations, are assessed over a 20-yr period. The use of a large set of MCS tracks allows us to robustly test the sensitivity of the results to factors such as region, latitude, and diurnal cycle. We aim to provide novel information on environments of observed MCSs for assessments of global atmospheric models and to improve their ability to simulate MCSs. Statistical analysis of all tracked MCSs is performed in two complementary ways. First, we investigate the environments when an MCS has occurred at different spatial scales before and after MCS formation. Several environmental variables are found to show marked changes before MCS initiation, particularly over land. The vertically integrated moisture flux convergence shows a robust signal across different regions and when considering MCS initiation diurnal cycle. We also found spatial scale dependence of the environments between 200 and 500 km, providing new evidence of a natural length scale for use with MCS parameterization. In the second analysis, the likelihood of MCS occurrence for given environmental conditions is evaluated, by considering all environments and determining the probability of being in an MCS core or shield region. These are compared to analogous non-MCS environments, allowing discrimination between conditions suitable for MCS and non-MCS occurrence. Three environmental variables are found to be useful predictors of MCS occurrence: total column water vapor, midlevel relative humidity, and total column moisture flux convergence. Such relations could be used as trigger conditions for the parameterization of MCSs, thereby strengthening the dependence of the MCS scheme on the environment. Significance Statement Large storm systems called mesoscale convective systems form across Earth. These are collections of thunderstorms, with associated high-level clouds that produce substantial, lighter rainfall and modulate Earth’s energy balance. They produce hazardous weather conditions, such as floods and high winds, and are responsible for a high percentage of rainfall in many regions globally. We investigate the environmental conditions under which they form, so that we can understand the spatial extent of the environment which is important for their formation, and also where and when the effects of these storms might be felt. The novel information generated here should help improve the representation of these storms in weather and climate models, improving the prediction of rainfall, thunderclouds, and high-level clouds.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Evidence of E × B staircase in HL-2A L-mode tokamak discharges

Theory and simulation suggest the existence of an E ×B staircase in the plasma core consisting of a series of nested m/n = 0/0 E×B shear layers that regulate turbulent transport across the layers together with mesoscale transport events occurring between them. Here, we show evidence for these phenomena in HL-2A L-mode discharges. Both high resolution electron cyclotron emission Te profiles and frequency modulated continuous wave reflectometer ne profiles show multiple gradient corrugations. The analysis of simultaneous poloidally and radially separated beam emission spectroscopy turbulent density fluctuation measurements over most of the minor radius of the plasma provides the evidence of eddy tilting and propagation direction reversals largely coincident with the profile corrugations, with long-range transport events occurring between these locations. The results provide significant additional evidence for the existence of an E × B staircase that influences particle and heat transport in L-mode discharges.

Liu, Wenbin (ORCID:0000000310424117)↗

NASA NTRS1994

Phytoplankton production in the Sargasso Sea as determined using optical mooring data

Optical measurements from an untended mooring provide high-frequency observations of in-water optical properties and permit the estimation of important biological parameters continuously as a function of time. A 9-month time series, composed of three separate deployments, of optical data from the BIOWATT 1987 deep-sea mooring located in the oligotrophic waters of the Sargasso Sea at 34 deg N, 70 deg W are presented. These data have been tested using several bio-optical models for the purpose of providing a continuous estimate of phytoplankton productivity. The data are discussed in the context of contemporaneous shipboard observations and for future ocean color satellite observations. We present a continuous estimation of phytoplankton productivity for the 9-month time series. Results from the first 70-day deployment are emphasized to demonstrate the utility of optical observations as proxy measures of biological parameters, to present preliminary analysis, and to compare our bio-optical observations with concurrent physical observations. The bio-optical features show variation in response to physical forcings including diel variations of incident solar irradiance, episodic changes corresponding to wind forcing, variability caused by advective mesoscale eddy events in the vicinity of the mooring, and seasonal variability corresponding to changes in solar radiation, shoaling of the mixed layer depth, and succession of phytoplankton populations.

Waters, K. J.↗

NASA NTRS2001

TRMM: Status of Precipitation Estimates and Science Highlights

As a part of NASA's Earth System Enterprise, the Tropical Rainfall Measuring Mission (TRMM) seeks to understand the mechanisms through which changes in tropical rainfall influence global circulation. Over the past 3 years, TRMM has contributed significantly towards reducing uncertainty in satellite estimates of rainfall in the Tropics, where almost 67% of the Earth's rain falls. TRMM has provided knowledge related to the climatology, seasonality, and variation of tropical rainfall; the mesoscale structure of rain-producing systems; and the physics of precipitation. An overview of these results will be presented. Additionally, a summary of research highlights will be presented focusing on application of TRMM data to topics such as hurricane monitoring, climate analysis, forecasting, microphysics, environmental impacts, and El Nino/La Nina. Examples and plans for operational use of TRMM data in tropical cyclone monitoring and other applications will also be given.

Shepherd, J. Marshall↗

NASA NTRS1987

TOMS ozone data compared at mesoscale resolution to tropopause heights from the AVE radiosonde network and to VAS radiances over the south-central United States

Observations from 1982 are being compared between the Total Ozone Mapping Spectrometer (TOMS), the Atmospheric Variability Experiment (AVE), and the VISSR Atmospheric Sounder (VAS) across Texas and Oklahoma. TOMS data show a significant ozone maximum over northeastern Texas. AVE radiosonde analysis shows tropopause heights with the highest pressure (lowest altitudes) over central Oklahoma accompanied by a mid-level jet across northern Mexico exiting above the Texas-Gulf coast. Corresponding VAS radiances show a dry slot in the middle tropopause across central Texas accompanied by a secondary slot over Oklahoma. The maxima are separated by 100 to 500 km. The impact of TOMS data on tropopause analysis is preliminarily seen as insignificant because TOMS data is not registered with respect to AVE tropopause heights.

Chesters, Dennis↗

DOE OSTI2023

Tuned Reactivity at the Lithium Metal–Argyrodite Solid State Electrolyte Interphase

Thin intermetallic Li 2 Te–LiTe 3 bilayer (0.75 µm) derived from 2D tellurene stabilizes the solid electrolyte interphase (SEI) of lithium metal and argyrodite (LPSCl, Li 6 PS 5 Cl) solid-state electrolyte (SSE). Tellurene is loaded onto a standard battery separator and reacted with lithium through single-pass mechanical rolling or transferred directly to SSE surface by pressing. State-of-the-art electrochemical performance is achieved, e.g., symmetric cell stable for 300 cycles (1800 h) at 1 mA cm -2 and 3 mAh cm -2 (25% DOD, 60 µm foil). Cryo-stage focused ion beam (Cryo-FIB) sectioning and Raman mapping demonstrate that the Li 2 Te–LiTe 3 bilayer impedes SSE decomposition. The unmodified Li–LPSCl interphase is electrochemically unstable with a geometrically heterogeneous reduction decomposition reaction front that extends deep into the SSE. Decomposition drives voiding in Li metal due to its high flux to the reaction front, as well as voiding in the SSE due to the associated volume changes. Analysis of cycled SSE found no evidence for pristine (unreacted) lithium metal filaments/dendrites, implying failure driven by decomposition phases with sufficient electrical conductivity that span electrolyte thickness. In conclusion, DFT calculations clarify thermodynamic stability, interfacial adhesion, and electronic transport properties of interphases, while mesoscale modeling examines interrelations between reaction front heterogeneity (SEI heterogeneity), current distribution, and localized chemo-mechanical stresses.

25 ENERGY STORAGE↗

DOE OSTI2020

Characterizing Dislocation Defects in Dark Field X-ray Microscopy Images of Bulk Aluminum

Material defects play a large role in material response under shock loading, yet the process of how these defects initiate, propagate, and annihilate is not well understood. Using a newly developed diagnostic, dark field X-ray microscopy (DFXM), we can now visualize the behavior of dislocation defects in materials at the mesoscale under varying conditions. Using data from the European Synchrotron Radiation Facility, we apply a variety of image processing techniques to capture relevant features to locate and characterize size and orientation of dislocation defects in bulk aluminum DFXM images. Beyond simple visualization, this analysis drives statistical characterization of the defects and their dynamic response to further improve the relevant physics models.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2025

Improved Simulation of East Asian Summer Monsoon in the High-resolution CESM1 and Its Causes

Based on the high- and low-resolution Community Earth System Model, version 1 (CESM1), and corresponding simulations from phase 6 of the Coupled Model Intercomparison Project (CMIP6), we compare the interannual variability of the East Asian summer monsoon (EASM). The EASM interannual variability is characterized by the anomalous western North Pacific anticyclone (WNPAC) circulation and the dipole rainfall pattern with a negative southern lobe over the western North Pacific and a positive northern lobe along the Meiyu–Baiu region, which is better reproduced by the high-resolution models. Here, the reason for the improvement in the high-resolution models has been attributed to the better simulation of the warm temperature advection from the wind anomalies on the climatological temperature gradient. Positive sea surface temperature (SST) anomalies over the tropical Indian Ocean are the key to the improved wind anomalies featuring a WNPAC in the high-resolution models. The warm SST anomalies over the tropical Indian Ocean strengthen the WNPAC by triggering a Kelvin-wave response to the enhanced heat release induced by the increased precipitation. Based on the mixed-layer heat budget analysis, the warm SST anomalies over the western Indian Ocean in the high-resolution CESM1 are tied to the anomalous easterly wind along the equator, which reduces surface evaporation and upwelling. Therefore, the better simulations of air-sea feedback and the oceanic mesoscale eddy over the western Indian Ocean are the key for the improved simulation of the EASM interannual variations in the high-resolution CESM1.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1983

Mesoscale meteorology - Theories, observations and models; Proceedings of the Advanced Study Institute, Bonas, Gers, France, July 13-31, 1982

Among the topics discussed are mesoscale processes and variability, regional and cyclonic scale motions and their prediction modeling, fronts, mesoscale instabilities, buoyancy (gravity) waves and topographic forcing, buoyant convection, boundary layers, and observational technology. The specific issues investigated include methods for initializing mesoscale forecast models, an energy theory for the propagation of gravity currents, a theory for rain bands within extratropical cyclones, the morning glory as a nonlinear wave phenomenon, cumulus clouds, the prediction of severe convection, planetary boundary layer parameterization, and three-dimensional wind field analysis from Doppler radar data.

Lilly, D. K.↗

NASA NTRS1983

Use of the VAS for analysis of a prethunderstorm environment

The information content of the VAS radiances can be converted to meteorological parameters useful for analyzing a severe weather environment. The method by which the VAS variances are converted to vertical profiles of temperature, dewpoints, and equivalent potential temperature involves a basic regression technique using the most local radiosonde data available for establishing a correlation matrix. The results indicate that mesoscale features apparent within images of the radiances can be converted to usable temperature and moisture fields using regression when surface temperature and dewpoint observations are included within the total data base. In addition, results indicate that surface data are very important for better defining lower tropospheric structure that the VAS radiances alone cannot properly resolve. Analyses of these retrievals distinctly show mesoscale structure in the temperature and moisture fields derived with VAS radiances collected every 3 hours, and 0000 GMT. The retrievals capture the moisture structure. More important, convective instability is clearly detected immediately before the onset of convection. The results indicate that the VAS is capable of providing valuable mesoscale information suitable for analyzing a preconvective environment that is generally clear.

Uccellini, L. W.↗

DOE OSTI2021

Multiscale design of nonlinear materials using a Eulerian shape optimization scheme

Motivated by recent advances in manufacturing, the design of materials is the focal point of interest in the material research community. One of the critical challenges in this field is finding optimal material microstructure for a desired macroscopic response. This work presents a computational method for the mesoscale-level design of particulate composites for an optimal macroscale-level response. The method relies on a custom shape optimization scheme to find the extrema of a nonlinear cost function subject to a set of constraints. Three key “modules” constitute the method: multiscale modeling, sensitivity analysis, and optimization. Multiscale modeling relies on a classical homogenization method and a nonlinear NURBS-based generalized finite element scheme to efficiently and accurately compute the structural response of particulate composites using a nonconformal discretization. A three-parameter isotropic damage law is used to model microstructure-level failure. An analytical sensitivity method is developed to compute the derivatives of the cost/constraint functions with respect to the design variables that control the microstructure's geometry. The derivation uncovers subtle but essential new terms contributing to the sensitivity of finite element shape functions and their spatial derivatives. Several structural problems are solved to demonstrate the applicability, performance, and accuracy of the method for the design of particulate composites with a desired macroscopic nonlinear stress-strain response.

42 ENGINEERING↗

NASA NTRS1989

Analysis of seasonal characteristics of Sambhar Salt Lake, India, from digitized Space Shuttle photography

Sambhar Salt Lake is the largest salt lake (230 sq km) in India, situated in the northwest near Jaipur. Analysis of Space Shuttle photographs of this ephemeral lake reveals that water levels and lake basin land-use information can be extracted by both the digital and manual analysis techniques. Seasonal characteristics captured by the two Shuttle photos used in this study show that additional land use/cover categories can be mapped from the dry season photos. This additional information is essential for precise cartographic updates, and provides seasonal hydrologic profiles and inputs for potential mesoscale climate modeling. This paper extends the digitization and mensuration techniques originally developed for space photography and applied to other regions (e.g., Lake Chad, Africa, and Great Salt Lake, USA).

Lulla, Kamlesh P.↗

NASA NTRSDate not supplied

Post-flight Analysis of Atmospheric Properties from Mars 2020 Entry, Descent, and Landing

The Mars 2020 spacecraft landed the Perseverance rover and Ingenuity helicopter successfully in Jezero crater on Feb. 18, 2021. The entry, descent, and landing (EDL) sequence of the spacecraft largely leveraged the previous Mars Science Laboratory (MSL) mission. The atmospheric modeling approach for Mars 2020 was also borrowed from MSL, and consisted of utilizing two mesoscale atmospheric models of the landing site during the Martian season of landing, and using that data to create a statistical model of the pressure, density, temperature, and winds that Mars 2020 could have expected to encounter. Additionally, Mars 2020 contained an optical sensor - Landing Vision System (LVS) - that relied on taking pictures of the terrain, and was sensitive to the dust opacity of the atmosphere. This paper will briefly describe the pre-flight atmospheric models used for Mars 2020, but will focus on post-flight assessment of these models by comparing them to near-landing day orbiter sounder data and onboard atmospheric measurements. Suggestions for potential model changes will be also discussed.

Soumyo Dutta↗

NASA NTRSDate not supplied

Post-flight Analysis of Atmospheric Properties from Mars 2020 Entry, Descent, and Landing

Soumyo Dutta↗

NASA NTRS1977

SESAME/Environmental Research Laboratories

The Environmental Research Laboratories (ERL) have been designated as the basic research group of the National Oceanic and Atmospheric Administration (NOAA). ERL performs an integrated program of research and research services directed toward understanding the geophysical environment, protecting the environment, and improving the forecasting ability of NOAA. Twenty-four laboratories located throughout the United States comprise ERL. The Project SESAME (Severe Environmental Storms and Mesoscale Experiment) Planning Office is a project office within ERL. SESAME is conceived as a joint effort involving NOAA, NASA, NSF, and the atmospheric science community to lay the foundation for improved prediction of severe convective storms. The scientific plan for SESAME includes a phased buildup of analysis, modeling, instrumentation development and procurement, and limited-scale observational activities.

Source record↗

NASA NTRS2006

The Three Gorges Dam Affects Regional Precipitation

Issues regarding building large-scale dams as a solution to power generation and flood control problems have been widely discussed by both natural and social scientists from various disciplines, as well as the policy-makers and public. Since the Chinese government officially approved the Three Gorges Dam (TGD) projects, this largest hydroelectric project in the world has drawn a lot of debates ranging from its social and economic to climatic impacts. The TGD has been partially in use since June 2003. The impact of the TGD is examined through analysis of the National Aeronautics and Space Administration (NASA) Tropical Rainfall Measuring Mission (TRMM) rainfall rate and Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature and high-resolution simulation using the Pennsylvania State University-National Center for Atmospheric Research (PSU-NCAR) fifth-generation Mesoscale Model (MM5). The independent satellite data sets and numerical simulation clearly indicate that the land use change associated with the TGD construction has increased the precipitation in the region between Daba and Qinling mountains and reduced the precipitation in the vicinity of the TGD after the TGD water level abruptly rose from 66 to 135 m in June 2003. This study suggests that the climatic effect of the TGD is on the regional scale (approx.100 km) rather than on the local scale (approx.10 km) as projected in previous studies.

Wu, Liguang↗

NASA NTRS2011

Large Eddy Simulations of Severe Convection Induced Turbulence

Convective storms can pose a serious risk to aviation operations since they are often accompanied by turbulence, heavy rain, hail, icing, lightning, strong winds, and poor visibility. They can cause major delays in air traffic due to the re-routing of flights, and by disrupting operations at the airports in the vicinity of the storm system. In this study, the Terminal Area Simulation System is used to simulate five different convective events ranging from a mesoscale convective complex to isolated storms. The occurrence of convection induced turbulence is analyzed from these simulations. The validation of model results with the radar data and other observations is reported and an aircraft-centric turbulence hazard metric calculated for each case is discussed. The turbulence analysis showed that large pockets of significant turbulence hazard can be found in regions of low radar reflectivity. Moderate and severe turbulence was often found in building cumulus turrets and overshooting tops.

Ahmad, Nash'at↗