Search NASA⌕ Search

SEARCH · Search NASA

Results for “multi material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Implementation of a cell-wise Block-Gauss-Seidel iterative method for SN transport on a hybrid parallel computer architecture

We have implemented a cell-wise, block-Gauss-Seidel (bGS) iterative algorithm, for the solution of the S{sub n} transport equations on the Roadrunner hybrid, parallel computer architecture. A compute node of this massively parallel machine comprises AMD Opteron cores that are linked to a Cell Broadband Engine{trademark} (Cell/B.E.). LAPACK routines have been ported to the Cell/B.E. in order to make use of its parallel Synergistic Processing Elements (SPEs). The bGS algorithm is based on the LU factorization and solution of a linear system that couples the fluxes for all S{sub n} angles and energy groups on a mesh cell. For every cell of a mesh that has been parallel decomposed on the higher-level Opteron processors, a linear system is transferred to the Cell/B.E. and the parallel LAPACK routines are used to compute a solution, which is then transferred back to the Opteron, where the rest of the computations for the S{sub n} transport problem take place. Compared to standard parallel machines, a hundred-fold speedup of the bGS was observed on the hybrid Roadrunner architecture. Numerical experiments with strong and weak parallel scaling demonstrate the bGS method is viable and compares favorably to full parallel sweeps (FPS) on two-dimensional, unstructured meshes when it is applied to optically thick, multi-material problems. As expected, however, it is not as efficient as FPS in optically thin problems.

97 MATHEMATICS AND COMPUTING↗

Unit physics performance of a mix model in Eulerian fluid computations

In this report, we evaluate the performance of a K-L drag-buoyancy mix model, described in a reference study by Dimonte-Tipton [1] hereafter denoted as [D-T]. The model was implemented in an Eulerian multi-material AMR code, and the results are discussed here for a series of unit physics tests. The tests were chosen to calibrate the model coefficients against empirical data, principally from RT (Rayleigh-Taylor) and RM (Richtmyer-Meshkov) experiments, and the present results are compared to experiments and to results reported in [D-T]. Results show the Eulerian implementation of the mix model agrees well with expectations for test problems in which there is no convective flow of the mass averaged fluid, i.e., in RT mix or in the decay of homogeneous isotropic turbulence (HIT). In RM shock-driven mix, the mix layer moves through the Eulerian computational grid, and there are differences with the previous results computed in a Lagrange frame [D-T]. The differences are attributed to the mass averaged fluid motion and examined in detail. Shock and re-shock mix are not well matched simultaneously. Results are also presented and discussed regarding model sensitivity to coefficient values and to initial conditions (IC), grid convergence, and the generation of atomically mixed volume fractions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of a Thin-Wall Magnesium side door Inner Panel for Automobiles

Cast magnesium side door inner panels can provide a good combination of weight, functional, manufacturing and economical requirements. However, several challenges exist including casting technology for thin-wall part design, multi-material incompatibility and relatively low strength vs steel. A project has been initiated, supported by the US Department of Energy, to design and develop a lightweight frame-under-glass door having a thin-wall, full die-cast, magnesium inner panel. This development project is the first of its kind within North America. Phase I of the project is now complete and the 2.0mm magnesium design, through casting process enablers, has met or exceeded all stiffness requirements, with significant mass reduction and part consolidation. In addition, a corrosion mitigation strategy has been established using industry-accepted galvanic isolation methods and coating technologies.

36 MATERIALS SCIENCE↗

N-BAR PROBLEMS AS APPROXIMATIONS TO THE BREE PROBLEM

The Bree solution to the problem of a ratcheting cylinder under constant pressure and cyclic thermal load is a fundamental result in nuclear engineering and widely used as the technical basis for the ASME Boiler and Pressure Vessel Code and other design methods. However, because the loading conditions in the Bree problem are difficult to achieve experimentally there have been relatively few works experimentally examining the problem and extending it to other relevant design situations, for example cladded components. In contrast, 2-bar problems are widely studied experimentally and are relatively easy to setup. These 2-bar problems are thought to be representative of Bree-type geometries, but a formal connection has not been demonstrated. This work formally establishes the connection between the Bree cylinder and an n-bar problem – a coupled bar experiment with, in general, more than two bars linked in parallel. The connection suggests that n-bar experiments using a fairly limited number of bars might be an experimentally-accessible setup that better represents ratcheting phenomenon in actual nuclear pressurized components. Such experiments could test surrogate cladded or multi-material components by using bars of different materials. Finally, this work suggests control schemes that yield optimally efficient n-bar experiments – experiments that best replicates a Bree cylinder with a limited number of bars.

Messner, Mark C.↗

{ital n}-bar problems as approximations to the Bree problem

The Bree solution to the problem of a ratcheting cylinder under constant pressure and cyclic thermal load is a fundamental result in nuclear engineering and widely used as the technical basis for the ASME Boiler and Pressure Vessel Code and other design methods. However, because the loading conditions in the Bree problem are difficult to achieve experimentally there have been relatively few works experimentally examining the problem and extending it to other relevant design situations, for example cladded components. In contrast, 2-bar problems are widely studied experimentally and are relatively easy to setup. These 2-bar problems are thought to be representative of Bree-type geometries, but a formal connection has not been demonstrated. This work formally establishes the connection between the Bree cylinder and an n-bar problem a coupled bar experiment with, in general, more than two bars linked in parallel. The connection suggests that n-bar experiments using a fairly limited number of bars might be an experimentally-accessible setup that better represents ratcheting phenomenon in actual nuclear pressurized components. Such experiments could test surrogate cladded or multi-material components by using bars of different materials. Finally, this work suggests control schemes that yield optimally efficient n-bar experiments experiments that best replicates a Bree cylinder with a limited number of bars.

Messner, M. C.↗

Additive Manufacturing of Frequency-Agile W-Band Packaging

Abstract —In this paper we demonstrate a fully additively manufactured packaged W-band amplifier with integrated bypass capacitors. This package was fabricated using a chip-first approach and aerosol jet printing. Package substrates (dielectrics), conductors and interconnects are printed around a bare die attached to a carrier. This package uses shaped ramp interconnects, allowing for frequency agnostic package performance of the interconnect with no impedance discontinuity, within the physical limits of the printer. High dielectric constant thin films of a polymer-matrix nanocomposite for bypass capacitors were printed using multi-material aerosol jet printing. The maximum measured packaged gain is 14.9 dB in the W-band, compared to the maximum bare die gain of 15.5 dB in the same frequency range. From 75 - 92 GHz, the average package loss is 1.1 dB including 3 mm transmission line, interconnects, and a GSG launch structure correlating to an average loss of 0.37 dB/mm.

Additive manufacturing, aerosol jet printing, hete↗

A Mechanical Test Frame for Property Evaluations at Cryogenic Temperature

On-board storage of hydrogen fuel has been designated as a limiting factor in the advancement of fuel cell technologies in the automotive industry. The use of cryo-compressed Type III pressure vessels presents one option to overcome this barrier. These multi-material vessels will be expected to perform at high pressure and extreme low temperatures, which creates a complex engineering design challenge. Many materials exhibit highly temperature-dependent properties, which must be considered for the efficient design of cryo-compressed pressure vessels. Complicating this issue, mechanical property data at cryogenic temperatures is sparse. This technical paper provides a description of a test apparatus commissioned specifically to help address this shortcoming. A mechanical test frame was retrofitted with a continuous flow cryostat capable to evaluate various mechanical properties throughout a broad temperature range of 25 °C to -269 °C with a load limit of 10 kN. An investigation of the thermomechanical properties of an epoxy resin was carried out as a demonstration.

Mechanical characterization, cryogenic pressure ve↗

Process Development of the Vaporizing Foil Actuator Welding Technique

The industrial focus on continuous improvement for products is leading design engineers to consider multi-material design concepts more frequently. The design concepts use the advantages of each material while simultaneously minimizing the drawbacks. It also allows for the overall weight of the products to be reduced. Some traditional joining methods, though, struggle to join dissimilar material combinations. A technique known as vaporizing foil actuator welding, which was developed around ten years ago, is a solid-state joining method that has the potential to overcome the barriers to dissimilar material joining. The biggest drawbacks of vaporizing foil actuator welding are that it is still exclusively used in laboratory settings and early in the technology development process. As such, there is not enough confidence in the process for it to be transitioned to manufacturing environments yet. This work begins by analyzing the current state of the technology and identifying a roadmap to achieve a transition to manufacturing. The analysis found that increased confidence in the technology requires sample to sample repeatability to be improved. Beyond that, the process also needs to be fully automated before it can be considered as a viable technique for mass production. In order to further develop the technique, a fully automated work cell was constructed. By removing the human element from the process, this cell helped identify iii the aspects which contribute to process variability. The positioning of the vaporizing foil actuator was identified as the most important factor in process stability. A small set of samples were made in the automated cell with the addition of one component epoxy adhesive around the perimeter of the weld. These samples showed improved process repeatability compared with the samples made without adhesive. This indicates that small amounts of adhesive may be critical in using the process in industrial settings. Additionally, work was performed with manual positioning and adhesive dispensing. This work found that a hybrid joint behaves like traditional weld bonding, where the addition of adhesive makes the joint stronger than if either of the two joining methods were used on their own. To realize this performance with vaporizing foil actuator welding, though, the adhesive needs to be protected from burning during the rapid compression of air during the impact process.

36 MATERIALS SCIENCE↗

Reducing warpage in a hybrid large-scale additive manufacturing and compression molding process

In recent years, a hybrid manufacturing process, developed by combining extrusion-based large-scale additive manufacturing (AM) and compression molding (CM) techniques, has shown promising outcomes for producing structurally functional parts. The process can be used with both short fiber-reinforced composites and neat polymers and hence, even multi-material parts can be manufactured easily. This process offers the advantages of structural enhancement by having a desired fiber orientation using a large-scale AM process, as well as rapid manufacturing capability using a CM process. In the large-scale AM process, the alignment of fibers in the deposition direction enables significant improvement in the mechanical properties of the manufactured parts. However, the anisotropy resulting from the directional arrangement of fibers also introduces challenges related to warpage in the produced parts. This study aims to identify the causes of warpage and propose strategies to mitigate it. The research involves the use of preforms manufactured through the large-scale AM, which are then combined with the neat resin for CM manufacturing. A finite element-based numerical simulation model is developed, employing a sequentially coupled thermomechanical approach. Through a parametric study using the simulation models, optimization of printing direction and preform geometry is performed to minimize warpage. This contributes to the advancement and wider adoption of AM/CM hybrid manufacturing to produce structurally functional parts.

Jo, Eonyeon↗

Creep in multi-principal element materials –– A review

The ongoing push towards enhanced energy efficiency and reduced emissions has necessitated the creation of materials with superior performance, especially under extreme conditions. Modern industries, such as aerospace, energy production, and nuclear power, rely heavily on materials that can withstand elevated temperatures without compromising structural integrity. At these heightened temperatures, materials, even when subjected to mechanical stresses well below their yield strength, may experience slow deformation leading to eventual rupture — a phenomenon known as creep. With the expansive design space that comes with the high entropy concept and their reported excellent high temperature strength, multi-principal element materials (MPEMs) have attracted interest in the scientific community for high-temperature applications. Here, this review offers a comprehensive examination of existing studies on creep in MPEMs, which includes multi-principal element−alloys, −bulk metallic glasses, −ceramics, and −superalloys, comparing published findings on MPEMs with pure elements, traditional alloys, bulk metallic glasses, and superalloys. The sub-topics covered include a comparison among different creep-testing methods, creep mechanisms, creep exponents, creep strain rates, activation volume, and creep-activation energy. Modeling efforts for predicting creep behavior of MPEMs are also reviewed. Methods for improving creep resistance by performing heat treatments and/or modifying microstructures are discussed. Overall, the current state of MPEMs has not yet surpassed the creep performance of commercial alloys. Finally, directions for future efforts are suggested, such as experimenting in various controlled environments, expanding the number of compositions tested, exploring advanced manufacturing techniques, and using machine-learning to predict creep properties based on compositions and microstructures.

36 MATERIALS SCIENCE↗

Containing Tc-99 Using a Multi-sorbing Barrier Material - 18249

Immobilization of Tc-99 is a challenge at on-site waste disposal facilities in the DOE complex because the oxyanion pertechnetate (TcO{sub 4}{sup -}) binds weakly (if at all) to the surface of mineral solids and other conventional barrier materials (distribution coefficient, Kd<2 mL/g). The study described herein evaluated TcO{sub 4}{sup -} uptake from aqueous solutions using a multi-sorbing organo-clay barrier material synthesized from sodium-bentonite (Na-B) exchanged with hexadecyltrimethylammonium (HDTMA). The exchange transformed the negatively charged surface of Na-B to a positively charged surface to bind TcO{sub 4}{sup -}. Batch tests were conducted to evaluate sorption of TcO{sub 4}{sup -} onto the multi-sorbing clay barrier material using ammonium-pertechnetate solutions with activity ranging from 1000 to 2,000,000 pCi/L. Tests were conducted with a solid-to-liquid ratio of 1:100 in 50-mL centrifuge tubes rotated at 30 rpm for 24 hr. Solutions were created by dissolving ammonium-pertechnetate in DI water or synthetic low-level radioactive waste leachate. Solids were separated from the test solution by centrifugation at 4000 rpm for 10 min. A liquid scintillation counter was used to measure the Tc-99 in solution. Isotherms from the batch tests show that the multi-sorbing barrier material is very effective in removing Tc-99, with Kd > 2900 mL/g. Using this high capacity sorbent in engineered barriers may provide a sustainable solution to control release of Tc-99 and other anions of concern from on-site disposal facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Controlled release of hydrogen from composite nanoparticles

Multi-functional materials for use in reversible, high-capacity hydrogen separation and/or storage are described. Also described are systems incorporating the materials. The multi-functional materials combine a hydrogen absorbing material with a high-efficiency and anon-contact energy absorbing material in a composite nanoparticle. The non-contact energy absorbing material include magnetic and/or plasmonic materials. The magnetic or plasmonic materials of the composite nanoparticles can provide localized heating to promote release of hydrogen from the hydrogen storage component of the composite nanoparticles.

08 HYDROGEN↗

Controlled release of hydrogen from composite nanoparticles

Multi-functional materials for use in reversible, high-capacity hydrogen separation and/or storage are described. Also described are systems incorporating the materials. The multi-functional materials combine a hydrogen-absorbing material with a high-efficiency and a non-contact energy-absorbing material in a composite nanoparticle. The non-contact energy-absorbing material include magnetic and/or plasmonic materials. The magnetic or plasmonic materials of the composite nanoparticles can provide localized heating to promote release of hydrogen from the hydrogen storage component of the composite nanoparticles.

Murph, Simona H.↗

OPTIMIZING A PORTABLE MICROWAVE INTERFERENCE SCANNING SYSTEM FOR NONDESTRUCTIVE TESTING OF MULTI-LAYERED DIELECTRIC MATERIALS

The projected microwave energy pattern, wave guide geometry, positioning methods and process variables have been optimized for use of a portable, non-contact, lap-top computer-controlled microwave interference scanning system on multi-layered dielectric materials. The system can be used in situ with one-sided access and has demonstrated capability of damage detection on composite ceramic armor. Specimens used for validation included specially fabricated surrogates, and ballistic impact-damaged specimens. Microwave data results were corroborated with high resolution direct-digital x-ray imaging. Microwave interference scanning detects cracks, laminar features and material properties variations. This paper presents the details of the system, the optimization steps and discusses results obtained.

36 MATERIALS SCIENCE↗

Methods for manufacturing geometric multi-crystalline cast materials

Methods are provided for casting one or more of a semi-conductor, an oxide, and an intermetallic material. With such methods, a cast body of a geometrically ordered multi-crystalline form of the one or more of a semiconductor, an oxide, and an intermetallic material may be formed that is free or substantially free of radially-distributed impurities and defects and having at least two dimensions that are each at least about 10 cm.

36 MATERIALS SCIENCE↗

A Sustainable Multi-Dimensional Printable Material

Polymeric materials are usually tailored for specific functionality. A single polymer exhibiting multiple simultaneous functionalities often requires intricate molecular architecture, which is difficult to manufacture at scale because of its complex synthesis routes. In this work, a facile, partly renewable composition—prepared via reactive melt processing—that induces tunable functionalities such as 3D printability, shape recovery, and self-healing while exhibiting satisfactory mechanical properties is reported. The system with a hydrogen-bonded 3D network consists of thermally reversible nano-scale agglomerates of sustainable, rigid phenolic oligomers and crystallizable flexible polymer. Local molecular mobility and temperature-dependent relaxation and recovery of the non-equilibrium networked states enable exploiting these simultaneous functionalities. Transitions involving solidification and structure stabilization at ambient temperature spanning several hours after preheating only at 70 °C directly contrast typical thermoplastic or thermoplastic elastomer behaviors. Results from this study can inform the design of future rheology modifiers and materials for soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗