Search NASA⌕ Search

SEARCH · Search NASA

Results for “nuclear reprocessing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Sulfonamide and Sulfonamido-phenol Ligands for Extraction of f-Elements from Alkaline High-Level Waste

Alkaline High Level Waste (HLW) has been accumulated at Hanford and Savannah River Sites as a result of reprocessing for nuclear weapons production during the cold war. A large volume (∼100 MGal) has been accumulated in carbon steel tanks at Savannah River (SRS) and Hanford. The tank waste contains three separate phases generated when NaOH was added to previously acidic Purex raffinates: 1-2 Supernatant liquid, salt-cake, and sludge. The sludge consists mainly of insoluble hydroxides of transition metals while the supernate and salt-cake contain caustic-soluble materials, including salts of highly radioactive fission products Cs(I) and Sr(II). Current treatment of alkaline HLW in SRS includes: i) The Actinide Removal Process (ARP), which is based on sorption of {sup 90}Sr and Actinides (An) on monosodium titanate (MST), also known as 'alpha-strike' process, followed by ii) Caustic Side Solvent Extraction (CSSX),4 which is used for the extraction of {sup 137}Cs by modified calixarenes in a hydrocarbon diluent. Residual actinides in some tanks are removed after CSSX by an additional ARP process commonly referred to as 'alpha-finishing'. Despite the success of ARP for Sr and An removal, as it is a sorption process, it represents the kinetic bottleneck of integrated salt waste processing. Hence potential introduction of additional organic ligands for actinide extraction (in a modified CSSX process) could simplify the overall integrated process, making it more efficient and economical, with less titanate needed and shorter sorption time, as some of the actinide component would be removed during CSSX. In this study tri-sulfonamide and o-sulfonamido-phenol (mono-sulfonamide) ligands have been studied as extractants for Sm(III), which is being used as an Am(III) surrogate. Our prior studies in the group using a tri-sulfonamide (iPr-tsa-B) showed favorable extraction for Sm(III) nitrate salts from alkaline solutions. Mono-sulfonamides possess similar orientation of binding sites to pyrocatechols, which have been found to be good ligands for Am(III) binding and extraction from alkaline media. Tri-sulfonamide of the type iPr-tsa-B6 (1 mM in CH{sub 2}Cl{sub 2} solution) was studied for Ln{sup 3+} extraction using Sm(NO{sub 3}){sub 3}.6H{sub 2}0 (10 and 25 μM) in alkaline solution of NaOH (0.05, 0.1, 0.2, 0.3 mM) / 0.1 M NaNO{sub 3}. Stripping of the organic phase was done using 0.1 M HNO{sub 3} and quantification of Sm{sup 3+} was done using ICP-OES at 359.3 nm. The need to improve stability of the complex led to synthesis of compounds with N-donor site closer to the central benzene ring to facilitate cation-π interactions. Synthesis of tri-sulfonamide type A: a) Chloromethyl methyl ether, SnCl{sub 4}, CH{sub 2}Cl{sub 2}, 0 deg. C, N{sub 2}, 4 h, 57%; b) NaN{sub 3}, reflux in H{sub 2}O/acetone for 22 h, 80%; c) PPh{sub 3}, THF/H{sub 2}O, 22 h, 79%; d) p-toluene sulfonyl chloride, Et{sub 3}N, 1,2-DCE, 22 h. Extraction: Sm(NO{sub 3}){sub 3}.6H{sub 2}O (2 mM) in 5 ml of aqueous NaOH (pH 10.5 - 14) + 6 ml of CH{sub 2}Cl{sub 2} solution of msa (20 mole equiv.) were rotated on a wheel (60 rpm; 20 h). Stripping: 5 ml of 0.1 M HNO{sub 3} + CH{sub 2}Cl{sub 2} solution of msa (after extraction, centrifugation and filtration) was rotated on the wheel (60 rpm; 20 h). Sm{sup 3+} was quantified using UV-Visible spectrophotometry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigating Radiation-Induced Actinide Species in Solution

Our fundamental understanding of actinide radiation-induced redox chemistry is crucial due to their unavoidable exposure to ionizing radiation fields, both inherent and from in-process applications. Plutonium (Pu) and americium (Am) both possess multiple oxidation states, the careful manipulation of which are essential in the study and utilization of their rich chemistry, developing new nuclear technologies, and securing the long-term sustainability of nuclear power. However, knowledge in this area is far from complete. Consequently, we have studied the radiation-induced chemistry of both Pu and Am through a variety of techniques. Temperature-controlled electron pulse radiolysis has been used to study Am for the first time, determining the feasibility of Am redox reactions under used nuclear fuel reprocessing conditions, (e.g. nitric acid, non-ambient temperature). Additionally, we developed an experimentally evaluated multi-scale computer model for the prediction of gamma radiation-induced Pu redox chemistry due to radiolysis and disproportionation reactions in concentrated nitric acid solutions.

actinide↗

EXPERIMENTAL OBSERVATIONS ON THE ROLES OF CADMIUM POOL IN MARK-IV ELECTROREFINER

Idaho National Laboratory and Argonne National Laboratory have developed and demonstrated a pyroprocessing technology for the Department of Energy to reprocess spent nuclear fuel. One of the key steps in the pyroprocessing was electrorefining the spent fuel in a metal form in a molten LiCl-KCl-UCl3/liquid cadmium system using an engineering scale electrorefiner (Mark-IV ER). This article summarizes experimental observations and engineering aspects for the roles of the liquid cadmium for electrorefining of the spent fuel in the Mark-IV ER. It was found that the liquid cadmium pool acted as an intermediate electrode during the electrorefining process. The cadmium level gradually decreased due to its high vapor pressure at the ER operating temperature. The low cadmium level caused the anode assembly to electrically short with the ER vessel hardware, which resulted in difficulty determining the endpoint of uranium dissolution from the anode baskets and reducing the current efficiency. A reflux cadmium vapor trap has successfully prevented the cadmium level from decreasing and mitigated cadmium vapor deposition on cold metal surface inside the ER.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Spent Fuel Isn't Really Spent

Nuclear Engineer Jon Carmack talks about one of the biggest misconceptions about used nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Compositions and methods for monitoring actinides

Compositions and methods for monitoring the quantity of actinides present in a test sample are disclosed. Compositions and methods for monitoring the motion of special nuclear materials through space are also described. Compositions and methods for monitoring the quantity of a fissile special nuclear material present in a test sample are disclosed. Compositions and methods for monitoring actinides during reprocessing of spent nuclear fuel after 30-year cool down are disclosed. Compositions and methods for monitoring actinides during reprocessing of spent nuclear fuel after 180 day cool down are also disclosed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Recycle of Am-241 obtained from long term stored plutonium for use in radioisotope power systems - 15035

Pu-238 has been used as a power source for spacecraft since the early days of space exploration. It has proven to be an effective source of power where the use of solar generated power is impractical. Its application for use in spacecraft power systems was developed by the USA and Russia who have spent many $ 100s of millions on its development and production. However, the original facilities for the production of Pu-238 are no longer in use and existing worldwide stockpiles have reduced to levels sufficient for only one or two further missions. Production of Pu-238 requires considerable facilities including a nuclear reactor and reprocessing plants that are very expensive to build and operate. The European Space Agency (ESA) has assessed the options for post-launch power generation in future European space missions and has made the decision to pursue the use of Am-241 as an alternative isotope to power future European Radioisotope Power Systems (RPS). What makes Am-241 attractive for the European market is its 100% isotopically pure production from the decay of Pu-241 in separated civil plutonium stockpiles. Historically, Europe has relied on collaborations with the USA or Russia to access these nuclear power sources. During 2009, the European Space Agency (ESA) funded a project to examine the cost and practicality of establishing a European source of material suitable for Radioisotope Power Systems (RPS). The study concluded that a small number of radioisotopes could be used in RPSs. On further review two leading candidates, Am-241 and Pu-238, were selected for further study. Whilst Pu-238 was recognized as the isotope of choice for use in RPSs, the costs of setting up a European based production facility was prohibitively expensive. Although Am-241 has a number of limitations compared to Pu-238, the much reduced production costs make Am-241 an attractive option for European based production of RPSs. Despite its lower power density of ∼ 0.11 Wth/g, Am-241 is viewed as a potential alternative to Pu-238 because of its availability within the nuclear fuel cycle. During the reprocessing of spent nuclear fuel plutonium is separated as a chemically pure PuO{sub 2} product, containing around 3-11% w/w of the Pu-241 isotope, and placed into storage. During storage the Pu-241 isotope beta decays to Am-241 with a half-life of 14.4 years. {sub 94}{sup 241}Pu → (β 14.4 y) {sub 95}{sup 241}Am. This process has resulted in many 100 kgs of americium growing into the civil plutonium stockpile in the UK; material that is of value in generating heat sources and is able to be recycled. The key benefit of Am-241 as a potential European RPS source isotope is the availability of feed material along with the facilities to process it. It is expected that aged civil PuO{sub 2} will contain 25-50 g Am-241 per kg PuO{sub 2} depending on the source. A conceptual flowsheet using facilities for separating americium from plutonium is expected to produce on average 8.4 kg Am/year. ESA are now following their published road-map of studies to develop flight ready RTGs and RHUs. This has included the development and testing of the flowsheet to be used for production of Am-241. The project has focused on underpinning the conceptual flowsheet, using aged plutonium in NNL's PuMA laboratory. This has underpinned the design of a plant to produce a steady supply of Am-241. The scope of the overall project is 'store to store' - the starting point is aged plutonium currently housed in existing Sellafield stores and the end point is the storage of separated plutonium and americium powders on the Sellafield site. The full scale process is planned to be housed within the NNL's Central Laboratory in an existing facility designed for plutonium active operations. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear criticality safety standard for a fuel reprocessing plant assuming burnup credit published by the atomic energy society of Japan - 14591

In this paper an outline of the standard published in April 2015 by the Atomic Energy Society of Japan (AESJ) is presented. The standard gives basis of nuclear safety management of a spent fuel reprocessing plant that assumed burnup credit in nuclear criticality safety evaluation. Ten years ago the AESJ published Basic Items of Criticality Safety Control: 2004, AESJ-SC-F004:2004, which prescribed basic ideas, requirements and methods on nuclear criticality safety controls of facilities handling with nuclear fuel materials in general for preventing a nuclear criticality accident. However, it did not include any specific procedures for adopting burnup credit. Therefore, a new standard was envisaged as the first Standard for fuel reprocessing plants, which clarified the specific procedures to apply burnup credit to designers, operators, maintenance persons and administrators. The Standard, Procedures for Applying Burnup Credit to Criticality Safety Control of a Reprocessing Facility: 2014, AESJ-SC-F025: 2014, was developed by the AESJ after vital discussions of the Working Group on Nuclear Criticality Safety Control, which were followed by critical reviews of the Special Committee on Nuclear Fuel Cycle and those of the Standard Committee, where both committees were established under the AESJ. The followings are some features of the standard: 1. In many countries, application of burnup credit has been considered especially in transportation and storage of spent fuel. The standard applies to a reprocessing plant, especially to the Rokkasho Reprocessing Plant in Japan. The present edition of the Standard assumes the first phase of burnup credit, i.e., burnup credit considering reduction in {sup 235}U, production of {sup 239}Pu and changes in other actinides, but not considering neutron absorption effect of fission products. 2. This standard covers nuclear criticality safety management including safety design and safety control stages. It prescribes each procedure of nuclear safety management with emphasis on its necessity rather in detail. Attached to the standard are seven appendices, which give reference to it, and explanations, which provide supplemental information to the readers. Future needs of AESJ standards in the field of nuclear criticality safety will be discussed in the presentation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Preliminary Probabilistic Performance Assessment Model for Radiological and Chemical Contamination at the West Valley Site, New York - 19295

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351-ha site located approximately 48 km south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States at the WNYNSC. NFS built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg (640 metric tons) of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations halted in 1972 and never restarted, leaving behind radioactive and chemical wastes. The reprocessing wastes include high-level waste (HLW), so U.S. Department of Energy (DOE) was compelled to complete certain waste management activities under the West Valley Demonstration Project (WVDP) Act of 1980, including decommissioning of WVDP facilities. As collaborating agencies, NYSERDA and the DOE are tasked with making decisions about decommissioning and risk reduction for the West Valley Site. Neptune and Company, Inc. (Neptune) was contracted to develop a probabilistic performance assessment (PPA) model to assist the agencies in their decision making process for decommissioning the WVDP and WNYNSC. One important tool that is needed in order to inform the decision-making process is a science-based model of the contamination at the West Valley Site and its potential implications for human health and the environment. The West Valley PPA Model (the Model), developed using the GoldSim modeling software, is a tool intended to provide support for decision making with uncertainty, in a manner that is transparent, defensible, and robust. The PPA Model includes contaminant transport and health effects components, and is organized around geographically-organized contaminated facilities. These include the waste disposal areas licensed by the U.S. Nuclear Regulatory Commission and the State of New York, a waste tank farm for storage of HLW resulting from reprocessing operations, and several areas contaminated with radioactive and chemical constituents. The Model evaluates contaminant transport from these sources to points of exposure across the site and into receiving surface waters and sediments. Hypothetical people and wildlife are exposed to contamination at these locations, and the effects of these exposures are evaluated. Contaminant transport processes to be evaluated in the Model include groundwater and surface water transport, contaminant translocation by plants and animals, diffusion in subsurface air and water, and erosion of the Site. The evaluation of exposures to people in this preliminary model is limited to a resident farmer scenario, and ecological assessment is performed at the level of a screening analysis. The results of these preliminary evaluations inform future model developments. Model results are subjected to sensitivity analysis in order to determine those pathways and parameters that are most significant in influencing the results. This information allows analysts and decision makers to focus on those aspects of Site behavior and processes that contribute most to overall uncertainty. With this information, the Supplemental Environmental Impact Statement (SEIS) can inform defensible decisions regarding remediation of the Site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Distribution Development for Residual Inventory at the New York West Valley Site - 20400

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351 ha site located approximately 48 km south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into Agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States. NFS, a private company, built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations ended in 1972 and never reopened, leaving behind radioactive and chemical wastes. Operations led to contamination in a number of facilities and locations. Some of that contamination has migrated from waste disposal zones to other layers, formations, and features on and off the WNYNSC. Phase I decommissioning activities are ongoing and involve the removal of a number of areas and structures that have been associated with contamination. The purpose of this work is to outline the approach for characterizing contamination not associated with disposed wastes, contaminated structures, or specific releases. In this work, the term, residual radiological activity, is used to describe environmental contamination that exists subsequent to the completion of Phase I decommissioning activities, that is not associated with disposed wastes, contaminated structures, or specific releases. Contamination from the Site was quantified relative to data that characterize the concentrations of radionuclides that exist in background. Background concentrations are those present in the area but having no influence from Site related activities. The existence of residual radiological activity that is elevated relative to background has the potential to contribute to future risks to human health and the environment. As a consequence, the residual inventory information is used to inform the West Valley Probabilistic Performance Assessment (PPA) model to characterize potential future risks to human health and the environment. The centralized West Valley Data Management System (DMS) was the source of information for the data assembled in this analysis. The DMS is a fairly large compilation consisting of thousands of records from investigation studies, with sample dates ranging from 1990 to present. Samples from monitoring wells, boreholes, geoprobe studies, surface water, surface soils, storm water outfalls, ventilation stack filters, plant and animal tissues, and more are included in the DMS. Results are typically reported in units of activity per unit volume. For the purpose of the analyses presented here, all results were converted into consistent units of pCi per unit volume. Since 1990, data have been collected from various locations across the WNYNSC at different times with varying frequency over the course of several decades. As a consequence, a number of potential issues can arise with respect to the assembly of a dataset that is deemed adequate for the characterization of residual radiological activity. These issues were assessed and resolved to the extent possible through careful consideration of the properties of the distributions. The intent was to use data which characterize the current state of the Site. Radionuclides can be designated to one of several groups depending on their origin. In this work the groups considered were 1) Naturally Occurring Radioactive Material (NORM), 2) fallout, and 3) Other (including power plant, medical research, etc). This grouping is a useful construct with respect to the interpretation of fixed laboratory results. For example, NORM radionuclides that exist within a decay chain should have approximately equivalent distributions of concentrations if they are representative of background conditions. Insights such as these can be used as a check to identify sample results that need to be further investigated or omitted due to issues associated with reported results from fixed laboratory analyses. This type of analysis provided a foundation for the assessment of the adequacy of sample results for use in subsequent components of an assessment. The general process for the assessment of residual radiological contamination at the Site consists of a sequence of several steps. First, for each analyte, several statistical tests were performed to assess the weight of evidence against the null hypothesis that the mean of the distribution of concentrations was equal to zero. If the mean of the distribution of concentrations for a given radionuclide was not found to be greater than zero, then it was removed from consideration as a component of the residual radiological contamination. If there was significant evidence to reject the hypothesis of the mean being equal to zero, the second step was to compare the distribution of the data from the Site to that of the corresponding background. A suite of tests was used to compare the distributions of the site and background data. The results of these tests were collectively used to determine if site data are elevated relative to background. The third step was to develop distributions using a Bayesian framework to characterize the distribution of mean of the increment present above background for each of the radionuclides. The Bayesian model implemented allowed for the comparison of site-specific records to background concentrations to better approximate contamination attributed to the Site. A final screening step was employed for radionuclides that exceed background. This screening step compared 95% upper confidence limits (UCLs) from the increment distribution developed in the previous step to the risk screening levels. This approach yields a list of analytes that were determined to be elevated relative to background.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influence of uranyl complexation on the reaction kinetics of the dodecane radical cation with used nuclear fuel extraction ligands (TBP, DEHBA, and DEHiBA)

Specialized extractant ligands – such as tri-butyl phosphate (TBP), N,N-di-(2-ethylhexyl)butyramide (DEHBA), and N,N-di-2-ethylhexylisobutryamide (DEHiBA) – have been developed for the recovery of uranium from used nuclear fuel by reprocessing solvent extraction technologies. These ligands must function in the presence of an intense multi-component radiation field, and thus it is critical that their radiolytic behaviour be thoroughly evaluated. This is especially true for their metal complexes, where there is negligible information on the influence of complexation on radiolytic reactivity, despite the prevalence of metal complexes in used nuclear fuel reprocessing solvent systems. Here we present a kinetic investigation into the effect of uranyl (UO 2 2+ ) complexation on the reaction kinetics of the dodecane radical cation (RH˙ + ) with TBP, DEHBA, and DEHiBA. Complexation had negligible effect on the reaction of RH˙ + with TBP, for which a second-order rate coefficient (k) of (1.3 ± 0.1) × 10 10 M -1 s -1 was measured. For DEHBA and DEHiBA, UO 2 2+ complexation afforded an increase in their respective rate coefficients: k(RH˙ + + [UO 2 (NO 3 ) 2 (DEHBA) 2 ]) = (2.5 ± 0.1) × 10 10 M -1 s -1 and k(RH˙ + + [UO 2 (NO 3 ) 2 (DEHiBA) 2 ]) = (1.6 ± 0.1) × 10 10 M -1 s -1 . This enhancement with complexation is indicative of an alternative RH˙ + reaction pathway, which is more readily accessible for [UO 2 (NO 3 ) 2 (DEHBA) 2 ] as it exhibited a much larger kinetic enhancement than [UO 2 (NO 3 ) 2 (DEHiBA) 2 ], 2.6× vs. 1.4×, respectively. Complementary quantum mechanical calculations suggests that the difference in reaction kinetic enhancement between TBP and DEHBA/DEHiBA is attributed to a combination of reaction pathway (electron/hole transfer vs. proton transfer) energetics and electron density distribution, wherein attendant nitrate counter anions effectively ‘shield’ TBP from RH˙ + electron transfer processes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Updates to a Preliminary Probabilistic Performance Assessment Model for Radiological and Chemical Contamination at the West Valley Site, New York - 20420

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351-ha site located approximately 48 km south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States at the WNYNSC. NFS built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg (640 metric tons) of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations halted in 1972 and never restarted, leaving behind radioactive and chemical wastes. The U.S. Department of Energy (DOE) was required to complete certain waste management activities under the West Valley Demonstration Project (WVDP) Act of 1980 including decommissioning of WVDP facilities. As collaborating agencies, NYSERDA and the DOE are tasked with making decisions about decommissioning and risk reduction for the West Valley Site. Neptune and Company, Inc. (Neptune) was contracted to develop a probabilistic performance assessment (PPA) model to assist the agencies in their decision making process for decommissioning the WVDP and WNYNSC. One important tool that is needed in order to inform the decision-making process is a science-based model of the West Valley Site that evaluates potential future consequences for human health and the environment. This forms the core of the spatial domain of the West Valley PPA Model. The PPA Model, developed using the GoldSim system modeling software, is a tool intended to provide support for decision making that evaluates uncertainty, in a manner that is transparent, defensible, and robust. The PPA Model includes contaminant transport and health effects components, and is organized around geographically-grouped contaminated facilities. These include the waste disposal areas licensed by the U.S. Nuclear Regulatory Commission and the State of New York, a waste tank farm for storage of high level radioactive waste resulting from reprocessing operations, and several areas contaminated with radioactive and chemical constituents. The PPA Model evaluates contaminant transport from these sources to points of exposure across the site and into receiving surface waters and sediments. Hypothetical people and wildlife could be exposed to contamination at these locations, and the effects of these exposures are evaluated. Contaminant transport processes to be evaluated in the PPA Model include groundwater and surface water transport, contaminant translocation by plants and animals, diffusion, and erosion. The evaluation of exposures to people in this preliminary model is limited to a resident farmer scenario, and ecological assessment is performed at the level of a screening analysis. The results of these preliminary evaluations inform future model developments. PPA Model results are subjected to sensitivity analysis in order to determine those pathways and parameters that are most significant in influencing the results. This information allows analysts and decision makers to focus on those aspects of Site behavior and processes. With this information, the decision makers can drive informed, defensible decisions regarding decommissioning of the Site. This paper includes an update of the information presented at WM2019 [1]. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Quantifying the impact of climate change on erosion - 20397

The New York State Energy Research and Development Authority (NYSERDA) is the owner of the Western New York Nuclear Service Center (WNYNSC), a 1,351-ha (3,338-ac) site located approximately 48 km (30 mi) south of Buffalo, New York. In 1962, Nuclear Fuel Services, Inc. (NFS) entered into Agreements with the Atomic Energy Commission and New York State to construct the first commercial reprocessing plant of nuclear fuel in the United States. NFS, a private company, built and operated the spent fuel reprocessing plant and waste disposal facilities, processing 640 Mg (metric tons, or 705 short tons) of spent nuclear fuel from 1966 to 1972 under an Atomic Energy Commission license. Nuclear fuel reprocessing operations ended in 1972 and never reopened, leaving behind radioactive and chemical wastes. Erosion can play an important role in the fate and transport of waste at sites where disposal of long-lived waste is anticipated. The statistical characterization of key processes related to erosion is essential to the understanding of site stability through time. One of the key processes governing erosion is extreme precipitation and it is critical that trends in the distribution of extreme precipitation events through time be represented. The evidence of climate change is increasingly well documented and projected impacts on extreme precipitation events should be incorporated in performance assessment studies when relevant. Not evaluating future climate states in a performance assessment is contradictory to good modeling practice. Specifically, excluding climate change limits development of modeling information that could aid in effective decision making. The current climate literature provides both observational evidence and climate model projections of climate trends and/or climate change in the late 20. and early 21. centuries for North America and the northeast United States. In this work, this information was used to assess the impacts of potential changes in climate on erosion processes. The goal was to understand how projections of future climate relate to the performance of the WNYNSC through time. In the first stage of this work multi-temporal historical aerial images were analyzed in conjunction with orthophotography and Lidar data to develop probability distributions for variables representing important erosion processes. The information from these analyses was then used in conjunction with simulated data from the West Valley Erosion Working Group (EWG). Analysis of EWG simulations provides estimates for the change in erosion rates through time that is driven by changes in climate. The time-varying rates of erosion change were applied to the historical aerial imagery data in order to inform time-varying rates of erosion that are driven by changes in climate. Ultimately, this process resulted in the identification of locations for features like gully heads using both the Lidar dataset and projection of the estimated location from the historical aerial photo under consideration back to the Lidar dataset. The distance between the estimate of the location from the historical image and that of the Lidar dataset was the estimated distance the feature has moved. This distance was then divided by the number of years between the Lidar dataset and the year of the historical aerial image of interest to get a rate of movement through time. This was done for several dozen points on each historical aerial image. The analyses from the EWG were used to characterize the relative impact of climate change on the erosion rates. This relative impact was quantified by comparing the LEM based estimates of erosion that were derived using historical climate data with LEM based estimates of erosion that were derived using projections of future climate. The relative increase in the erosion rates was then applied to the historical estimates of erosion derived from the analysis of the historical aerial imagery. This approach was used since the LEM-based estimated of the historical erosion rates from the past century have a bias towards underestimating erosion. This underestimation is hypothesized to be a consequence of an inability of the LEMs to account for the impacts of land-use change (i.e. deforestation) which had been shown to significantly increase erosion in similar Northern hardwood forest ecosystems. In summary, gully head retreat rate and gully widening rate were characterized using statistical probability distributions from the historical aerial image analysis. Simulated data from the EWG was used to estimate the climatically-driven changes in erosion rates through time. The changes through time from the EWG were applied to the gully head retreat rate and gully widening rate characterized using the historical aerial image analysis. This information can be used to inform PPA models to project future risks from a given site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Choosing Your Nuclear Fuel Cycle: A Life Cycle Assessment Perspective - 16425

Nuclear waste management has always been a much debated topic and a key driver for decisions within the nuclear industry. A standardised global approach has not yet been developed and at present many countries are re-considering their position. In the UK the reprocessing of Spent Nuclear Fuel is projected to stop, but no clear indication about the future approach has been given. This contribution sets out the early stages of an approach to compare the possible alternatives based on Life Cycle Assessment (LCA), which is widely used in other sectors to assess the overall environmental burdens of a product or a service across the whole life cycle - i.e. from cradle to grave. The LCA may serve to support decision-making processes within the nuclear industry and, provided that it is used in an open and transparent way, to improve public attitudes towards nuclear energy. To date few LCA studies within the nuclear industry have been carried out, the main issue being the lack of a standardised methodology to evaluate the impacts of radionuclides. The present study proposes a new framework for this purpose, and demonstrates its application in an LCA study of the current UK approach to the management of spent nuclear fuel based on specific data from plants at Sellafield. The final results of the study will show the overall environmental footprint of the reprocessing of spent nuclear fuel, in terms of both radiological and non-radiological impacts. A 'hot spot' analysis will also be performed to highlight the critical processing steps. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hafnium(IV) complexation with oxalate at variable temperatures

Abstract Appropriate management of fission products in the reprocessing of spent nuclear fuel (SNF) is crucial in developing advanced reprocessing schemes. The addition of aqueous phase complexing agents can prevent the co-extraction of these fission products. A solvent extraction technique was used to study the complexation of Hf(IV) – an analog to fission product Zr(IV) – with oxalate at 15, 25, and 35°C in 1 M HClO

Chemistry↗

Processes for Removal and Immobilization of 14C, 129I, and 85Kr

This is a white paper covering the results of a literature search and preliminary experiments on materials and methods to remove and immobilize gaseous radionuclided that come from the reprocessing of spent nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Handling of Ammonium Nitrate Mother-Liquid Radiochemical Production - 13089

The aim of the work is to develop a basic technology of decomposition of ammonium nitrate stock solutions produced in radiochemical enterprises engaged in the reprocessing of irradiated nuclear fuel and fabrication of fresh fuel. It was necessary to work out how to conduct a one-step thermal decomposition of ammonium nitrate, select and test the catalysts for this process and to prepare proposals for recycling condensation. Necessary accessories were added to a laboratory equipment installation decomposition of ammonium nitrate. It is tested several types of reducing agents and two types of catalyst to neutralize the nitrogen oxides. It is conducted testing of modes of the process to produce condensation, suitable for use in the conversion of a new technological scheme of production. It is studied the structure of the catalysts before and after their use in a laboratory setting. It is tested the selected catalyst in the optimal range for 48 hours of continuous operation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Adsorption modeling for off-gas treatment

Off-gas generated from the reprocessing of used nuclear fuel contains a mixture of several radioactive gases including {sup 129}I{sub 2}, {sup 85}Kr, HTO, and {sup 14}CO{sub 2}. Over the past few decades, various separation and recovery processes have been studied for capturing these gases. Adsorption data for gaseous mixtures of species can be difficult to determine experimentally. Therefore, procedures capable of predicting the adsorption behavior of mixtures need to be developed from the individual isotherms of each of the pure species. A particular isotherm model of interest for the pure species is the Generalized Statistical Thermodynamic Adsorption isotherm. This model contains an adjustable number of parameters and will therefore describe a wide range of adsorption isotherms for a variety of components. A code has been developed in C++ to perform the non-linear regression analysis necessary for the determination of the isotherm parameters, as well as the least number of parameters needed to describe an entire set of data. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗