SEARCH · Search NASA

Results for “oxygen separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Insight into Primordial Solar System Oxygen Reservoirs from Returned Cometary Samples

The recent successful rendezvous of the Stardust spacecraft with comet Wild-2 will be followed by its return of cometary dust to Earth in January 2006. Results from two separate dust impact detectors suggest that the spacecraft collected approximately the nominal fluence of at least 1,000 particles larger than 15 micrometers in size. While constituting only about one microgram total, these samples will be sufficient to answer many outstanding questions about the nature of cometary materials. More than two decades of laboratory studies of stratospherically collected interplanetary dust particles (IDPs) of similar size have established the necessary microparticle handling and analytical techniques necessary to study them. It is likely that some IDPs are in fact derived from comets, although complex orbital histories of individual particles have made these assignments difficult to prove. Analysis of bona fide cometary samples will be essential for answering some fundamental outstanding questions in cosmochemistry, such as (1) the proportion of interstellar and processed materials that comprise comets and (2) whether the Solar System had a O-16-rich reservoir. Abundant silicate stardust grains have recently been discovered in anhydrous IDPs, in far greater abundances (200 5,500 ppm) than those in meteorites (25 ppm). Insight into the more subtle O isotopic variations among chondrites and refractory phases will require significantly higher precision isotopic measurements on micrometer-sized samples than are currently available.

Brownlee, D. E.↗

NASA NTRS1989

Fermentation and oxygen transfer in microgravity

The need for high rate oxygen transfer in microgravity for a Controlled Ecological Life Support System (CELSS) environment offers a number of difficulties and challenges. The use of a phase separated bioreactor appears to provide a way of overcoming these problems resulting in a system capable of providing high cell densities with rapid fermentation rates. Some of the key design elements are discussed.

Dunlop, Eric H.↗

NASA NTRS1992

Toxicological approach to setting spacecraft maximum allowable concentrations for carbon monoxide

The Spacecraft Maximum Allowable Concentrations (SMACs) are exposure limits for airborne chemicals used by NASA in spacecraft. The aim of these SMACs is to protect the spacecrew against adverse health effects and performance decrements that would interfere with mission objectives. Because of the 1 and 24 hr SMACs are set for contingencies, minor reversible toxic effects that do not affect mission objectives are acceptable. The 7, 30, or 180 day SMACs are aimed at nominal operations, so they are established at levels that would not cause noncarcinogenic toxic effects and more than one case of tumor per 1000 exposed individuals over the background. The process used to set the SMACs for carbon monoxide (CO) is described to illustrate the approach used by NASA. After the toxicological literature on CO was reviewed, the data were summarized and separated into acute, subchronic, and chronic toxicity data. CO's toxicity depends on the formation of carboxyhemoglobin (COHb) in the blood, reducing the blood's oxygen carrying capacity. The initial task was to estimate the COHb levels that would not produce toxic effects in the brain and heart.

Wong, K. L.↗

NASA NTRS1992

Evolution of a phase separated gravity independent bioreactor

The evolution of a phase-separated gravity-independent bioreactor is described. The initial prototype, a zero head-space manifold silicone membrane based reactor, maintained large diffusional resistances. Obtaining oxygen transfer rates needed to support carbon-recycling aerobic microbes is impossible if large resistances are maintained. Next generation designs (Mark I and II) mimic heat exchanger design to promote turbulence at the tubing-liquid interface, thereby reducing liquid and gas side diffusional resistances. While oxygen transfer rates increased by a factor of ten, liquid channeling prevented further increases. To overcome these problems, a Mark III reactor was developed which maintains inverted phases, i.e., media flows inside the silicone tubing, oxygen gas is applied external to the tubing. This enhances design through changes in gas side driving force concentration and liquid side turbulence levels. Combining an applied external pressure of 4 atm with increased Reynolds numbers resulted in oxygen transfer intensities of 232 mmol O2/l per hr (1000 times greater than the first prototype and comparable to a conventional fermenter). A 1.0 liter Mark III reactor can potentially deliver oxygen supplies necessary to support cell cultures needed to recycle a 10-astronaut carbon load continuously.

Villeneuve, Peter E.↗

NASA NTRS1992

Propellant production and useful materials: Hardware data from components and the systems

Research activities at the University of Arizona/NASA Space Engineering Research Center are described; the primary emphasis is on hardware development and operation. The research activities are all aimed toward introducing significant cost reductions through the utilization of resources locally available at extraterrestrial sites. The four logical aspects include lunar, Martian, support, and common technologies. These are described in turn. The hardware realizations are based upon sound scientific principles which are used to screen a host of interesting and novel concepts. Small scale feasibility studies are used as the screen to allow only the most promising concepts to proceed. Specific examples include: kg/day-class oxygen plant that uses CO2 as the feed stock, spent stream utilization to produce methane and 'higher' compounds (using hydrogen from a water electrolysis plant), separation of CO from the CO2, reduction of any iron bearing silicate (lunar soils), production of structural components, smart sensors and autonomous controls, and quantitative computer simulation of extraterrestrial plants. The most important feature of all this research continues to be the training of high-quality students for our future in space.

Ramohalli, Kumar↗

NASA NTRS1956

Effect of combustion-chamber pressure and nozzle expansion ratio on theoretical performance of several rocket propellant systems

Theoretical calculations of specific impulse to determine the separate effects of increasing the combustion-chamber pressure and the nozzle expansion ratio on the performance of the propellants, hydrogen-fluorine, hydrogen-oxygen, ammonia-fluorine and AN-F-58 fuel - white fuming nitric acid (95 percent). The results indicate that an increase in specific impulse obtainable with an increase in combustion-chamber pressure is almost entirely caused by the increased expansion ratio through the nozzle.

FUELS - ROCKETS (INCLUDES FUEL AND OXIDANT)↗

NASA NTRS2005

Pressurization System Modeling for a Generic Bimese Two- Stage-to-Orbit Reusable Launch Vehicle

A pressurization system model was developed for a generic bimese Two-Stage-to-orbit Reusable Launch Vehicle using a cross-feed system and operating with densified propellants. The model was based on the pressurization system model for a crossfeed subscale water test article and was validated with test data obtained from the test article. The model consists of the liquid oxygen and liquid hydrogen pressurization models, each made up of two submodels, Booster and Orbiter tank pressurization models. The tanks are controlled within a 0.2-psi band and pressurized on the ground with ambient helium and autogenously in flight with gaseous oxygen and gaseous hydrogen. A 15-psi pressure difference is maintained between the Booster and Orbiter tanks to ensure crossfeed check valve closure before Booster separation. The analysis uses an ascent trajectory generated for a generic bimese vehicle and a tank configuration based on the Space Shuttle External Tank. It determines the flow rates required to pressurize the tanks on the ground and in flight, and demonstrates the model's capability to analyze the pressurization system performance of a full-scale bimese vehicle with densified propellants.

Mazurkivich, Pete↗

NASA NTRS2016

Combustion Dynamics and Stability Modeling of a Liquid Oxygen/RP-2 Oxygen-Rich Staged Combustion Preburner and Thrust Chamber Assembly with Gas-Centered Swirl Coaxial Injector Elements

The Combustion Stability Tool Development (CSTD) project, funded by the Air Force Space and Missile Systems Center, began in March 2015 supporting a renewed interest in the development of a liquid oxygen/hydrocarbon, oxygen-rich combustion engine. The project encompasses the design, assembly, and hot-fire testing of the NASA Marshall Space Flight Center 40-klbf Integrated Test Rig (MITR). The test rig models a staged-combustion configuration by combining an oxygen-rich preburner (ORPB), to generate hot gas, with a thrust chamber assembly (TCA) using gas-centered swirl coaxial injector elements. There are five separately designed interchangeable injectors in the TCA that each contain 19- or 27- injector elements. A companion paper in this JANNAF conference describes the design characteristics, rationale, and fabrication issues for all the injectors. The data acquired from a heavily instrumented rig encompasses several injectors, several operating points, and stability bomb tests. Another companion paper in this JANNAF conference describes this test program in detail. In this paper, dynamic data from the hot-fire testing is characterized and used to identify the responses in the ORPB and TCA. A brief review of damping metrics are discussed and applied as a measure of stability margin for damped acoustic modes. Chug and longitudinal combustion stability models and predictions are described which includes new dynamic models for compressible flow through an orifice and a modification to incorporate a third feed line for inclusion of the fuel-film coolant. Flow-acoustics finite element modeling is used to investigate the anticipated TCA acoustics, the effects of injector element length on stability margin, and the potential use of an ORPB orifice trip ring for improving longitudinal stability margin.

Casiano, M. J.↗

NASA NTRSDate not supplied

Manufacturing and Metal Extraction Lunar Technology (MMELT)

Extraction processes of oxygen from regolith under development include carbothermal, molten regolith electrolysis (MRE), ionic liquids, and others, all of which result in a metal slag byproduct. The separation of some of these metals from the slag byproduct have been accomplished on small scales. However, no system currently exists that can extract aluminum, from these processes at scale, to create suitable feedstocks for manufacturing. Funding for MMELT will be used to develop a demonstration of the first end-to-end process to additively manufacture aluminum wire from lunar regolith in a simulated environment.

Manufacturing↗

NASA NTRS2000

Raman Gas Species Measurements in Hydrocarbon-Fueled Rocket Engine Injector Flows

Rocket engine propellent injector development at NASA-Marshall includes experimental analysis using optical techniques, such as Raman, fluorescence, or Mie scattering. For the application of spontaneous Raman scattering to hydrocarbon-fueled flows a technique needs to be developed to remove the interfering polycyclic aromatic hydrocarbon fluorescence from the relatively weak Raman signals. A current application of such a technique is to the analysis of the mixing and combustion performance of multijet, impinging-jet candidate fuel injectors for the baseline Mars ascent engine, which will burn methane and liquid oxygen produced in-situ on Mars to reduce the propellent mass transported to Mars for future manned Mars missions. The Raman technique takes advantage of the strongly polarized nature of Raman scattering. It is shown to be discernable from unpolarized fluorescence interference by subtracting one polarized image from another. Both of these polarized images are obtained from a single laser pulse by using a polarization-separating calcite rhomb mounted in the imaging spectrograph. A demonstration in a propane-air flame is presented, as well as a high pressure demonstration in the NASA-Marshall Modular Combustion Test Artice, using the liquid methane-liquid oxygen propellant system

Wehrmeyer, Joseph↗

NASA NTRS2022

Separating Propulsive Mass and Energy for Space Applications

Initially and traditionally, space access and in-space propulsion utilized combustion and expulsion of chemical “fuels” carried on board, with performance governed by the rocket equation. These chemicals produced energy, and after combustion, constituted the propulsive mass/momentum. The best such chemicals in terms of Isp that are deemed safe engineering/mission wise are hydrogen and oxygen, producing some 450 seconds of Isp. There are more reactive chemicals, such as fluorine, which have higher Isp, but also have serious safety issues. Propulsion in atmospheres can ingest atmospheric constituents (aka “airbreathing propulsion”) which provide additional propulsive mass when heated and a component of the combustion/energy generation process. This utilization of non-stored/carried propulsive mass provides partial separation of propulsive mass and energy and produces higher Isp. The other approach to separating propulsive mass and energy is to, either on board or added from offboard, supply additional energy, such as from nuclear or solar sources. This is the approach for fission nuclear thermal and electric propulsion, which can provide an Isp in excess of 800 seconds of Isp. Other processes or in addition to thermal expansion, such as electro-magnetics, can be employed to increase exit velocity and Isp. Separating propulsive mass and energy for space faring is commonly referred to as a means to circumvent the rocket equation and is capable of producing major benefits for the development of commercial deep space and space faring in general including affordable fast transits to mitigate the human health impacts of galactic cosmic radiation (GCR) and microG. The key to higher than chemical Isp, beyond H2-O2, and beyond the radiated energy and systems limitations of solar for space faring, is a light weight, high energy density source, either on board or via utilization of energy beaming to the vehicle. Traditional energy sources include chemical, heat, electrics, mechanical, photons, and nuclear. Propulsive mass can be carried on board, sourced beyond the surface of Earth via in-situ resource utilization (ISRU), and includes harvesting from atmospheres. High Isp via electromagnetic related propulsive mass acceleration requires sufficient ionization and conductivity. The major metrics for space propulsion are costs, safety, Isp, weight, and thrust level, the latter dependent upon mission requirements. High thrust for human missions is needed to reduce time exposed to radiation and microG and high thrust is required for space access. Costs of space access are reducing via reusability, printing manufacture, and robotization of manufacturing and operation. Chemical rockets provide high thrust from the expansion of the heated mass constituents at high mass flow. The other high thrust propulsion approach is magnetohydrodynamics (MHD), which, in addition to high thrust, has a high Isp of over 2,000 seconds of Isp. The VASIMIR engine offers some 5,000 seconds of Isp at high thrust [ref. 3]. Electric propulsion cycles are capable of Isp much higher than that but at low thrust levels using available energy sources. With cost as a major metric, reusable rockets and improved manufacturing and operations are rapidly greatly lowering the costs of space access, which could provide/supply in space fuel depots and affordable chemical propulsion for the desired human fast transits (e.g., some 200-day round trips to Mars). The other option for fast transits is VASIMIR, given a nuclear on-board energy source that has the requisite many megawatts of power and an alpha, kgs of weight/kW of energy produced, on the order of one (i.e., a light weight, high energy density energy source). The purpose of this report is to examine the options beyond traditional rocket engines, where propulsive mass and energy are combined, specifically the separation of propulsive mass and energy. This report considers the spectrum of advanced energetics, sources of propulsive mass, conductivity enhancement approaches, energy beaming possibilities, and candidate propulsion cycles. Suggestions are made for various combinatorial, system level, beyond traditional combustion rocket, space propulsion approaches for human deep space missions given the changing conditions of increased knowledge of deep space resources for ISRU, revolutionary energetics, and technology advancements writ large.

Dennis M. Bushnell↗

NASA NTRS1985

Experimental studies on the reaction kinetics of 1,1-dimethylhydrazine and oxygen

Measurements behind shock waves in highly diluted 1,1 dimethylhydrazine-O2-Ar mixtures clearly showed a two-stage reaction. In the first stage, UDMH decomposes via a unimolecular step; in the second stage, clearly separated from the first one, the decay products react further with O2. Values for the rate constant of unimolecular decomposition were obtained.

Just, T.↗

NASA NTRS1993

Petrologic study of the Belgica 7904 carbonaceous chondrite - Hydrous alteration, oxygen isotopes, and relationship to CM and CI chondrites

The genetic relationships between the petrology, hydration reactions, and isotopic oxygen composition in the Belgica 7904 (B7904) carbonaceous chondrite, and the relationship between B7904 and the CM and CI chondrites were investigated by characterizing seven components separated from B7904. The seven specimens included two partially altered chondrules, two phylosilicate clasts, two olivine fragments, and one matrix sample. The results of the analyses and thermodynamic calculations suggest that CI chondrites may have been produced in a two-stage alteration process from materials similar to that of the B7904 matrix, by reactions with liquid water in their parent body. The common CM chondrites may have undergone aqueous alteration in the parent body, in addition to hydration in the nebula, resulting in two-stage alterations; the parent body may have been different from that of B7904.

Ikeda, Y.↗

NASA NTRS2000

Chondrules in the LEW85332 Ungrouped Carbonaceous Chondrite: Fractionation Processes in the Solar Nebula

We studied 14 chondrules separated from LEW85332, an ungrouped type-3 carbonaceous chondrite related to CR chondrites; 23 elements were determined by neutron activation and the chondrules were characterized petrographically. Oxygen isotopic compositions were determined by R. N. Clayton and T. K. Mayeda for seven chondrules. Chondrule abundance ratios tend to form one of two distinct patterns. In low FeO chondrules, refractory lithophile patterns are flat (i.e., unfractionated); siderophile abundances are high and show a small decrease with increasing volatility. Although high FeO chondrules also have flat refractory lithophile abundance patterns, siderophile abundances are highly fractionated; refractory Ir is very low and Fe is very high relative to other siderophiles. We suggest that the low FeO chondrules in LEW85332 formed early in nebular history when metal was intimately mixed with silicates in the chondrule precursors, and that the viscosity of the liquid-solid mix was too high to permit expulsion of the metal by centrifugal action; their porphyritic structures are consistent with incomplete melting, which would result in relatively high viscosities. When the high FeO chondrules formed somewhat later, much of the Fe was oxidized and the melting of precursors was more extensive, FeO and other oxidized siderophiles were retained in the silicate liquid, and metal was lost, possibly expelled from low viscosity chondrule melts. The O isotopic compositions of the chondrules form a linear array of slope 0.93 +/- 0.05 on a three-isotope diagram, parallel to the carbonaceous chondrite anhydrous minerals (CCAM) line and a CR chondrule array, but offset from the latter by -1% in (delta)O-18. Some or all of this offset may reflect incorporation of O from Antarctic water during weathering. Chondrule (Delta)O-17 values correlate positively with FeO, possibly indicating that the (Delta)O-17 of the nebular gas composition increased with time. The chemical and O isotopic data suggest a temporal sequence extending from early, low FeO to late high FeO chondrules.

Wasson, John T.↗

NASA NTRS2008

Partitioning of Phosphorus and Molybdenum between the Earth's Mantle and Core and the Conditions of Core Formation

There are several hypotheses on the specific processes that might have occurred during the formation of the Earth. One hypothesis that has been proposed is that early in the Earth's formation, there was a magma ocean present, and within this body, siderophile elements separated out of the silicate liquid to form the metal core. This study addresses this hypothesis. P and Mo are moderately siderophile elements that are present in both the mantle and the core. The concentrations of P and Mo in silicate vs. metal can be measured and in turn used to determine the temperatures, pressures, oxygen fugacity and melt composition required to achieve the same concentrations as observed in the mantle. The data here include eight experiments examining the partitioning of P and Mo between metallic liquid and silicate liquid. The purpose of the experiments has been to gain a greater understanding of core-mantle separation during the Earth formation process and examines temperature effect on P and Mo, which has not been systematically studied before.

Acuff, K. M.↗

NASA NTRS1970

PC8B-4-X562 fuel cell electrical power supply, operations manual

The PC8B-4 fuel cell electrical power supply is an electrical powerplant designed to convert the chemical reaction of hydrogen and oxygen into electrical energy. It utilizes catalyzed electrodes with a potassium hydroxide electrolyte. The powerplant and test stand control unit are described together with a specifications summary. Separate sections deal with: performance, reactants supply and control, heat removal, water removal instrumentation, operation, and safety considerations.

Source record↗

NASA NTRS2000

Novel Optical Diagnostic Techniques for Studying Particle Deposition Upon Large Cylinders in a Sheared Suspension

On a twelve-month voyage to Mars, one astronaut will require at least two tons of potable water and two tons of pure oxygen. Efficient, reliable fluid reclamation is therefore necessary for manned space exploration. Space habitats require a compact, flexible, and robust apparatus capable of solid-fluid mechanical separation over a wide range of fluid and particle densities and particle sizes. In space, centrifugal filtration, where particles suspended in fluid are captured by rotating fixed-fiber mat filters, is a logical candidate for mechanical separation. Non-colloidal particles are deposited on the fibers due to inertial impaction or direct interception. Since rotation rates are easily adjustable, inertial effects are the most practical way to control separation rates for a wide variety of multiphase mixtures in variable gravity environments. Understanding how fluid inertia and differential fluid-particle inertia, characterized by the Reynolds and Stokes numbers, respectively, affect deposition is critical in optimizing filtration in a microgravity environment. This work will develop non-intrusive optical diagnostic techniques for directly visualizing where and when non-colloidal particles deposit upon, or contact, solid surfaces: 'particle proximity sensors'. To model particle deposition upon a single filter fiber, these sensors will be used in ground-based experiments to study particle dynamics as in the vicinity of a large (compared with the particles) cylinder in a simply sheared (i.e., linearly-varying, zero-mean velocity profile) neutrally-buoyant, refractive-index matched solid-liquid suspension.

Yoda, M.↗

NASA NTRS2018

The Star-Grazing Bodies in the HD 172555 System

Kiefer et al. reported the detection of infalling Ca II absorption in HD 172555, a member of the β Pictoris Moving Group (βPMG). We obtained HST Space Telescope Imaging Spectrograph and Cosmic Origins Spectrograph spectroscopy of this star at 2 epochs separated by a week, and we report the discovery of infalling gas in resonant transitions of Si III and IV, C II and IV, and neutral atomic oxygen. Variable absorption is seen in the C II transitions and is optically thick, with covering factors which range between 58% and 68%, similar to features seen in β Pictoris. The O I spectral profile resembles that of C II, showing a strong low-velocity absorption to +50 km/s in the single spectral segment obtained during orbital night, as well as what may be higher-velocity absorption. Studies of the mid-IR spectrum of this system have suggested the presence of silica. The O I absorption differs from that seen in Si III, suggesting that the neutral atomic oxygen does not originate in SiO dissociation products but in a more volatile parent molecule such as CO.

C. A. Grady↗